hi guys, first post on here, so go easy on me..heh heh
ive got my SPV M700....locked to ORANGE....and ive flashed it as per instructions with various roms...no probs.
only thing is, now when it reboots, whatever rom i use, i have a couple of issues with the display...
keypad wont show up when i press the "phone" button....all i see is a white screen where the keypad should be.
also, when i apply a theme, i only see the bars at the top and bottom of the screen change colour......not the "wallpaper" or "desktop".
no wallpapers or images i add to the desktop show up....
weird, as everything else works....wi fi, GPS..(dependant on rom used), text messaging, all work..
its just that themes and keypad dont show??
can someone PLEASE help me???
if there is anything i can use to basically wipe the lot off, and start again, il give it a go...even re flashed the original orange rom on here.....and the same thing happens.
when it reboots, the orange screen ...(or whatever rom boot screen i use) flashes up.......then where the green windows screen is supposed to show, i get a white screen, followed by the desktop loading....which is also white.....
Upgrade your hard spl to olipro 1.30, and use mtty to format your ppc, in this way you can have a clean flash of yr rom and avoid issues...
for mtty.exe you can find different topics on xda...
(credit goes to Eliasweb )
that worked!!!
many thanks my friend..much appreciated.
Related
i have tried to upgrade my htc p3300 and now it doesn't open. it comes out the htc start screen with the red numbers and nothing else .i've tried three button format but nothing .pls notice tha i cannot use active sync .
search the forum and you will be impressed!
http://forum.xda-developers.com/showthread.php?t=327366#2
More info needed.
Did you run USPL?
On the screen with red numbers, what does it say against SPL?
What ROM were you upgrading too?
Hi: This is my first posting and I am new on this board. I have had an MDA that I got as a gift from my Dad and I love it. However, I used it last week and for some unkown reason, it is stuck in the:
'Press Send to Restore Factory Defaults, Other Key to Quit.'
I have been trying to get past this for 4 days and am not having any luck.
I got to the Align Screen and that happened only once. Then I could not get past that. It keep showing the Align Screen and I kept tapping and it just kept going round and round from the Center Tap to the sides and back.
My battery is fully charged, I have read this forum and still I am lost. I would really appreciate any help. Thank you so much.
Toni
Do a Soft Reset or Hard Reset.
Cheers!
zabardast_1 said:
Do a Soft Reset or Hard Reset. Cheers!
Click to expand...
Click to collapse
Thank you for trying to help me. However, I have done both of the resets over and over and I keep getting the same result. 'Press send to restore factory defaults, other key to quit.'
I can get no further than that display regardless of what key or keys that I hit.
I have even tried the two ways of doing a Hard Reset:
1. Hold Com and Voice while pressing Soft Reset Button for 5 or more seconds until I get that display.
2. Hold Com, Voice and Camera while pressing Soft Reset Button for 5 or more seconds until I get that display.
I cannot get past that display regardless of what key or keys I press.
It seems frozen at that display point.
Tried again this am to hard reset my MDA. Now it goes and shows the T-Mobile screen with the IPL/SPL etc. Then goes into Windows and to the Align Screen and for some reason will not recognize the Screen Tapping to align the screen.
I did try to use my PC to recognize the MDA, but it would not. Downloaded WST and that would not recognize my MDA either. I understand that until I get past the Hard Rest my MDA will not be recognized by my PC due to ActiveSync being requried to connect my MDA to the PC. I don't know what else I can try. Search all day yesterday and could not find any solutions. Will continue today. Any suggestions, Please. Thank you.
Tonis said:
Tried again this am to hard reset my MDA. Now it goes and shows the T-Mobile screen with the IPL/SPL etc. Then goes into Windows and to the Align Screen and for some reason will not recognize the Screen Tapping to align the screen.
I did try to use my PC to recognize the MDA, but it would not. Downloaded WST and that would not recognize my MDA either. I understand that until I get past the Hard Rest my MDA will not be recognized by my PC due to ActiveSync being requried to connect my MDA to the PC. I don't know what else I can try. Search all day yesterday and could not find any solutions. Will continue today. Any suggestions, Please. Thank you.
Click to expand...
Click to collapse
Use the love rom to set phone back to "zero". Therefore you must press press the voice and camera buttons if joy reset youre phone.
You get some collored bloks om youre phone and then you can use the love rom.
After that you can use youre original rom updater
sleurhut said:
Use the love rom to set phone back to "zero". Therefore you must press press the voice and camera buttons if joy reset youre phone.
You get some collored bloks om youre phone and then you can use the love rom.
After that you can use youre original rom updater
Click to expand...
Click to collapse
Did a search for Love Rom and Wizard_Love ROM and only came up with 103 results consisting of some Threads with 1570, 898, 618,787, 893, 464........postings on the first page for Threads 1-25.
Now I do have a Red, Green, Blue, White Screen with RUU in the top right corner of the Red Bar with IPL 2.26 and SPL 2.26 in the Red Bar. Nothing is in the Green, Blue or White bar.
I tried to Hard Reset and Soft Rest and nothing happens. I removed my Battery and then tried again and still nothing happens?
Where can I find Wizard_Love ROM and what do I do when I find it. My PC will not recognize my MDA and I used WST and that cannot located my MDA.
I am at a complete loss of what to do next.
Thank you in advance for taking the time to try to help me get my phone operational.
sleurhut
Use the love rom to set phone back to "zero".
do not confuse guys with this statement.Wizard_love_Rom is a patched rom which is flashed to recover back the phone in some stuck up phones,but it doesn't set the phone back to 'ZERO',but its an italian language rom.
Tonis
The multicolor screen is the bootloaders with IPL/SPL 2.26 displayed,this is the mode from where you can flash another rom.There's no need to get the phone activesync,cuz it won't activesync in bootloaders.But when in bootloaders,connect the phone with pc via usb cable and watch small usb appear at the bottom of the bootloaders,if its there then you are good to go and can flash a rom.
Now,download the official T-mobile 2.26 from the link below and get the phone in bootloaders,check usb appear at the bottom and flash it to recover back to the default status of the phone.
http://forum.xda-developers.com/showthread.php?t=342744
Cheers!
zabardast_1 said:
sleurhut
Use the love rom to set phone back to "zero".
do not confuse guys with this statement.Wizard_love_Rom is a patched rom which is flashed to recover back the phone in some stuck up phones,but it doesn't set the phone back to 'ZERO',but its an italian language rom.
Tonis
The multicolor screen is the bootloaders with IPL/SPL 2.26 displayed,this is the mode from where you can flash another rom.There's no need to get the phone activesync,cuz it won't activesync in bootloaders.But when in bootloaders,connect the phone with pc via usb cable and watch small usb appear at the bottom of the bootloaders,if its there then you are good to go and can flash a rom.
Now,download the official T-mobile 2.26 from the link below and get the phone in bootloaders,check usb appear at the bottom and flash it to recover back to the default status of the phone.
http://forum.xda-developers.com/showthread.php?t=342744
Cheers!
Click to expand...
Click to collapse
Thank you again for your help. Prior to this posting I found:
epimazzo Posting at: http://forum.xda-developers.com/showthread.php?t=294107&highlight=bootloader #1 and this is what cleared up my problem and now my MDA is running GREAT!!!!!!!!
This was the same thing that you posted for me, too.
Maybe some of you are already aware of this procedure, maybe not.
Anyway, it worked for me and I decided to share how to do it. Simple.
This procedure should only be used in case you really need enter into a bootloader mode (Red, Green, Blue, White Screen) and all other ways to do it has failed! Hold Camera button is one of these I am mentioning.
1. Make sure your Phone is not Connected to the PC and remove the dummy card or SD/MMC card
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. Reconnect your Phone to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Don’t use the IrDA or Bluetooth for the Upgrade)
4. Run the Upgrade again and it will work fine without any problems.
While upgrading, the ActiveSync program will not go on, however the upgrade is running.
So, Thank you all for your time and help. I do hope this helps others to find a way to correct their problems.
Thanks !
Yes.thats exactly what I wanted you to do
I'm glad you got it up and running fine
Cheers!
zabardast_1 said:
sleurhut
Use the love rom to set phone back to "zero".
do not confuse guys with this statement.Wizard_love_Rom is a patched rom which is flashed to recover back the phone in some stuck up phones,but it doesn't set the phone back to 'ZERO',but its an italian language rom.
Tonis
The multicolor screen is the bootloaders with IPL/SPL 2.26 displayed,this is the mode from where you can flash another rom.There's no need to get the phone activesync,cuz it won't activesync in bootloaders.But when in bootloaders,connect the phone with pc via usb cable and watch small usb appear at the bottom of the bootloaders,if its there then you are good to go and can flash a rom.
Now,download the official T-mobile 2.26 from the link below and get the phone in bootloaders,check usb appear at the bottom and flash it to recover back to the default status of the phone.
http://forum.xda-developers.com/showthread.php?t=342744
Cheers!
Click to expand...
Click to collapse
I does everything you do but
I don't have the cradle :S
so that means a problem?
or there a nother way?
Hi!
I got an mada vario 4. How can I upgrade the rom on it? Or can I change the t-mobile touch flo to manila 2.5? Thx! Zoli
Hi all,
i have a problem with one device here - Orbit II.
It is stuck on booting WM with volume controls on the screen. Usually it's not a big deal and can be solver with HR or by flashing a new rom, but the problem is that i cannot get it to do a HR: white screen with warning appears but when i press send buttong(the green one) - nothing happens, it doesn't react at all.
Ok, i was thinking to flash it, but another problem appeared: i can't enter bootloader(2 softbuttons+reset), same procedure works fine on my own device but this one just reboots and no bootloader...
I'm kinda out of options now.
Any help is appreciated.
Magnus23 said:
Ok, i was thinking to flash it, but another problem appeared: i can't enter bootloader(2 softbuttons+reset), same procedure works fine on my own device but this one just reboots and no bootloader...
I'm kinda out of options now.
Any help is appreciated.
Click to expand...
Click to collapse
press & hold camera button and make soft reset...
Thank you for the answer but i as said in first post, i have tried this, the white screen with the warning appears but pressing Send button does nothing, device does not react to this, so hard reset doesn't happen.
If someone could point to me any other way to enter bootloader - i can work my way from there.
I have also tried MTTY but USB connection doesn't appear in the list(yes, i have killed the activesync processes).
which screen
1st,
2nd, radio protocol version
3rd gif splash
4th wimo load screen
And also what rom have you got on atm.
It is stuck on 4th wimo load screen.
I have no idea about the actual WN version as it's not my device, but i assume it's the original O2 rom since there is still O2 splash screen.
Magnus23 said:
It is stuck on 4th wimo load screen.
I have no idea about the actual WN version as it's not my device, but i assume it's the original O2 rom since there is still O2 splash screen.
Click to expand...
Click to collapse
o well then i take its not hard-spl'd in which case i really do not get it, i have got into bootloader at the radio version screen so i dont get this one?? Is it still covered by o2 warrenty, it is 2 yrs long so best bet go to them and see what they say...
Thats if it has no hard-spl... If not take the battery out for a day and see if that brings it back to life, stranger things have happened seen that solve quite a few problems.
Well, device is not mine, a friend asked to look at it. I don't think he got a warranty left.
Well, the thing is, its not a big deal realy, it's not bricked or anything, i just need to get into bootloader, from there i can flash hardspl and the rest from SD... i just haven't seen this thing before... unable to enter the bootloader.
Is there any way to force the device to enter bootloader? I mean other than the standart procedures of Camera+reset?
I think i've seen somewhere a CustomRUU that could do that, even with incomplete WM boot. Like send some commands to the device to enter bootloader.
Does anyone know anything like this?
I was finally able to upgrade a new SX66 from WM2003 to WM6.5 After upgrading my phone when it boots shows the 4 Color Stripes. How am I able to change that when my device does a soft boot or a hard boot....
Any suggestions is well needed
you can´t change the colour-striped bootscreen... on all roms upwards wm 5.0 you have to live with it. many people would like to change their bootscreen - but no one have an idea how to do...
you can't chance this.... is not possible!
EDIT: to late ;-)
Okay I was just checking.... I remember back in 2006 when I had this phone the ROMS that came out had a bootscreen included in the ROM instead of how it is now - when it boots from soft reset or popping the battery back on it comes the 4 color stripes.
After looking at other forums, I realize the screen that I'm trying to replace is the splash screen on the SX66... Is there any creators working on this???
no, like d-two said, it is just not possible.
right, "Splash screen" no problem "boot screen" not possible!!!
Your question was answered multiple times already. No need to triple post (in fact, it is not allowed )
Thread closed.
Hi
I am sure you will all tell me there are a million threads like this out there and to follow the steps previously posted but I think I have tried everything.
So I have a touch HD.
If I hold the volume + and - and press the power button I sometimes get it to enter the menu where it will go to the hard reset menu. If I then press the + volume button as requested this does nothing and then it returns to the red, green, blue and white screen looping round.
If I plug the phone into the power or my PC I get the red, green, blue and white screen looping continuously. I cannot get the phone just to charge.
I have been to the HTC site to get a ROM using my serial number but it tells me that it is invalid for my type of phone??!!
I have downloaded numerous ROMS from this site and they just wont install. In the installation procedure it doesn't recognise that I have a ROM there so it is obviously corrupted. At the end of this installation not working I have tried the recovery option which it says completes but then it wont installation the ROM after this and so continues to loop in the red, green, blue and white screen.
My SPL version is 1.14.0000
A step by step solution would be massively appreciated.
Thanks for reading!!
Just for further info. When I plug the phone into the PC I can't get it to connect via active sync as it just keeps reloading the Blue, Red, Green and White screen.
I have tried the mtty.exe fix running relevant tasks but the connection isn't there for long enough without it reloading the 4 coloured screen
help!!!!!!!!!!!!!!!!!!!!!!!!!!!
Finally managed to 'update' the ROM using RUU_BlackStone_Orange_UK_1.14.405.3 how my phone still stays on the red, green, blue and white screen argh!!!
I really thought that once it had installed that would be it fixed!!
Any suggestions?
Someone please help!!
Can anyone help as I really dont know what I can do!
The only thing that I can get to communicate with the phone is the standard orange ROM. Even though this has supposedly installed correctly I am still stuck on the Tri-Colour screen!!
I advice you to do the Task29..
This completely erases your system partition and you can flash a new fresh ROM...and a new radio of course since the Task29 removes everything...
I will give you just a little guide - there are millions of guides how to flash.
1. Download: Radio 1.17 (!!!FOR BLACKSTONE!!!), USPL 2.5, ROM you wish to flash, Task29
2. In the bootloader (RGB screen) connect your USB cable and wait until "serial" changes to "USB", then run USPL and wait...phone reboots and you will see it say USPL at the top...
3. Run task29 with radio 1.17 (*.nbh file) in the same folder - google "how to task 29 xda" or something like that and you should find a guide (I think I read a decent one in Leo forum)
4. After you have Task29ed and flashed radio 1.17 enter bootloader again, run USPL and flash the ROM you want...I recommend Topix 3.6 for example - I use that one and it is pretty good.
You should be OK after doing this...google a lot while going through this guide because you will probably get stuck at some points...this is not detailed guide...just a simple one...
I hope it helps you.
Sopis is a HTC God!!!
Sopis!!!
Thankyou so very very very very very very very very very much!!!
Absolutely brilliant!!! I really didnt think I was going to rescue my phone!!
If your ever in Leeds I owe you a pint!!!
Thanks again