Related
Some registry tweak or something?
weenter said:
Some registry tweak or something?
Click to expand...
Click to collapse
You just want the ringer to RING without any other indication of an incoming call?
or
U dont want an INCOMING CALL ALLTOGETHER?
I gather it is the Former coz In the latter simply turn On <flight mode>
U can also set the device to recieve calls without Ringing by setting it to Pick up after <zero> calls.
Using a handsfree here would be an advantage.
U wont Miss any call.
I just want the ringer to RING without any other indication of an incoming call. Is it possible?
weenter said:
I just want the ringer to RING without any other indication of an incoming call. Is it possible?
Click to expand...
Click to collapse
i'm also looking for a way to do this
Did anyone found a solution for this ?
texarcana said:
Did anyone found a solution for this ?
Click to expand...
Click to collapse
I doubt it... Seems kinda pointless, having the ability to tell you who is calling, but then deliberately turning it of..
yes, but when someone is calling, there is always a delay.
When you hear the first ring, the caller already heard it twice.
Maybe by disabling this, it would speed up the process a bit
texarcana said:
yes, but when someone is calling, there is always a delay.
When you hear the first ring, the caller already heard it twice.
Maybe by disabling this, it would speed up the process a bit
Click to expand...
Click to collapse
That's the network, not the device.
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
texarcana said:
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
Click to expand...
Click to collapse
Well... The cause may be that, but I doubt showing a caller ID screen will change the times....
texarcana said:
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
Click to expand...
Click to collapse
I agree with texarcana here, the lights begin to flash on my phone when it rings a good few seconds before the screen get around to displaying the incoming call notification.
This is on WM 6.1, on my new HTC Diamond Touch.
I assume that notifications such as an incoming call or text message are either
A) A windows message sent to a background service awaiting it.
B) An application is executed with parameters describing the event
In either case, i believe it must be possible to redirect the notification in the registry. However, if the notification method is at fault (ie causing slow response, most likely to be true if B above is true.)
I'm going to investigate, I'll post an update of my results.
Im really sorry to bump this really old thread but has anyone solved this?? I would like to disable the incomming call notification too.. cuz I just added a full screen caller ID, but the damn notification pops up and covers the photos of my contacts.. so whats the point of the caller ID if i, not gonna be able to see the pictures
well i know its in Hkey_curent_User\controlpanel\notifications\phone
but im not sure how to disable it...
or even more important (for me) only disable it for a certain #...? thanks! anyonbdy
To Diamond I found. cab which options are unblocking "flash light for." in SOUND & NOTIFICATION it didn't give but nothing. I dug around in the HKLM/Drivers/Builtln/Keylight and Keypad register and I turned off LED generally speaking but I blocked buttons
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
thanks, works for my htc pure with phonex
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
this will make the bubble of incalling to disappear??? if not who can i do it
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
Didn't work for my samsung i760, what about DispllayOrder? Set it to 0 too? Or what would that do exactly? I'm curious now, it's set to 1 so if all else fails, I could change it back to 1 again... I guess. I'd just like to know first before I go blindly jumping into something.. haha
Sidenote setting it to 0 did work I just had to reset my phone so remember to reset your phone after changing this, I see the curtain try to popup, or at least the frames but nothing after that... Although sometimes it does act buggy and I'll completely miss or be able to answer a call cause my phone will constantly viberate (No pickup on ringtone at all starting) then after the call is missed the viberating will stop but my phone will still be frozen... Thats when the screen is off though..
Okay after a few tests sometimes it does work and sometimes it doesn't work at all and the curtain will still show up... Then again screen off sometimes the phone wont ring at all, I'm setting it back to 1... LoL
I just wish there was a way or a more advanced notification manager, it should be just like being able to disable incoming text messages and disabling sent message notifications..
____
I'd love a fix for this too, as I already have a picture caller id with PocketX Photo Contacts Pro...
But it's annoying as all get out!! To put it politely, I slide to answer then I've got to press the left softkey too! In order to answer a call, if I could just disable the built in windows mobile caller id curtain then it'd be a heck of a lot easier...
Please let's get a scripter on this to start working their way around and tweaking it to be able to be disabled..
Thanks!!
________
As for ring delay which is also a few other posters concern of the phone taking it's own sweet time to decide when to start ringing... This is what I used for my i760, I'm sure someone here could turn this into use for any phone make and model:
Ring Time Limit Fix:
**772 [service code]
six zeros for the code (000000)
Scroll down with the d-pad till you see end of basic nam
hit right d-pad to change "exit" to "more"
hit middle d-pad to select
hit the down d-pad 76 times till it says slot cycle index
Change this to 1 or lower EDIT: By entering the value with the number pad and then you hit the middle d-pad to exit.
This changes the frequency at which the phone talks to the tower and will
start the unit ringing MUCH faster. the lower you go the faster but the more battery it uses. I find 1 gets the phone ringing within 3 seconds but doesn't hinder battery life.
Click to expand...
Click to collapse
I've got mine set to 0 though, but then again, I don't get very many calls, plus I have my phone charging a lot. Also I always carry around a spare extended fully charged battery in my holster... Usually my battery lasts a whole day... But with it set to 0 my phone picks up and rings at the end of the first ring on the callers end.
Thought this might be a good place to start listing any quick tips and tricks you might have discovered.
To Lock Device quickly
Keep finger on the Red (Call End) button and it will bring up some options including keylock.
Not sure if anyone's noticed this but when I end a call on my Dual there is annoying little delay of about 3 seconds before the actual call is ended so I searched the registry and found this:
[HKEY_LOCAL_MACHINE\Software\HTC\PHONE\PhoneExtendSetting]
And I changed the value of EndCallTime from 3000 to 1000 re-booted and voila no more delays when ending calls
Hold the on/off button for soft reset.
Smart Dialing
This is an advertised feature but apparently not too many people are aware of it. Go to the phone app and start tapping the first couple of letters of the contacts name and the name matches will appear for you to choose from. I find this much easier than opening up the Contacts app and scrolling down to the name you need.
after pressing send for phoneapp u see last calls.
If u press left/right on the highlighted contact the phone switches through home/mobile/office...
HKLM\Software\HTC\Biotouch\Biotouch\ regulates the FPS of the cubeanimation.
Change "DownFPS", "LightFPS" und "UpFPS" to something higher for a smoother (and faster) animation.
Disable 3G, if not needed (it drains the battery faster than GSM):
Edit the registry key HKLM\Software\OEM\UMTS\OpMode and set it to "1"
Then also you could change that setting
Phone Settings --> Band --> Network Type --> GSM
To activate the changes, open the comm manager from the Cube, disable the phone and enable it again.
In italy with Vodafone I can't able to select also the Network Band GSM/UMTS to "GSM(900)" but I have to let it configured as "Auto" or "GSM(900+1800)+UMTS(2100)"
Bits
Ello, new here.. no idea if this helps a few Dual owners but..
Apps found to work on the touch dual:
S2u2 (iphone slide to unlock app), works like a charm:
http://forum.xda-developers.com/showthread.php?t=343256
HHC, HTC Home Customizer (name says it all), also working like a charm:
http://www.pocketemu.com/download4.html
gfreek, thnx for the EndCallTime key, works perfect and.. 1 less annoying feature to go
Things I'm still looking to solve:
1. Mp3 ringtone seems to fade out after picking up a call, for about 2/3 seconds the ringtone is still audible :S
2. Looking for settings for the Handsfree profile, i have an Lm959 bluetooth bracelet (how geeky, i know), works fine.. but only for calls, the device is capable of blinking the leds on receiving msgs, im looking for the settings to enable just that on the TD.
3. Polling frequency of the TD seems to be on the high side, f.e. it takes about 3 rings from someone before the TD starts "ringing", since voicemail kicks in @ ring 6 I miss a lot of calls.
I found a topic about just this problem with the touch(Elf) on sprint networks, with a quickcode (##7380# I think, well.. I'm not on sprint..so that doesnt work over here.. anyone with any clue would be welcome.. My current solution is disabling voicemail..)
ln1234 said:
To Lock Device quickly
Keep finger on the Red (Call End) button and it will bring up some options including keylock.
Click to expand...
Click to collapse
to do this quicker go to settings => long press end key
and select automatically execute and then lock device
holding the red button then locks the device in one press
You can invoke s2u2 instead normal devicelock
just install s2u2, rename Slide2Unlock.exe to EndKey.exe and copy all files to windows directory, with resco explorer.
the ilock doesnt seem to be working on my touch dual. when i try to go to settings, the screen goes blank.
You need to disable directdraw, do it via the registry as you can't access the settings.
raid said:
Disable 3G, if not needed (it drains the battery faster than GSM):
Edit the registry key HKLM\Software\OEM\UMTS\OpMode and set it to "1"
Then also you could change that setting
Phone Settings --> Band --> Network Type --> GSM
To activate the changes, open the comm manager from the Cube, disable the phone and enable it again.
In italy with Vodafone I can't able to select also the Network Band GSM/UMTS to "GSM(900)" but I have to let it configured as "Auto" or "GSM(900+1800)+UMTS(2100)"
Click to expand...
Click to collapse
Is there a way to add the "3G setting" directly in the Comm Manager as seen here : http://forum.xda-developers.com/showthread.php?t=354380 ?
GpsPasSion said:
Is there a way to add the "3G setting" directly in the Comm Manager as seen here : http://forum.xda-developers.com/showthread.php?t=354380 ?
Click to expand...
Click to collapse
Go with Total Commander to:
\\registry\HKLM\Software\HTC\CommManager and change the key
"SupportedFunctions" from 4 to 5
then make a new map named "5" (without the quotes)
go to that map and make a STRING named "default" and the string must
be "3G" (also without any quotes).
Then turn the phone off and on again and there is a 3G setting in your CommManager. I did not manage yet to add a icon in front of it
(and also not tested the working of the new setting)
Thanks, someone also pointed me to Schaps' app that has that setting http://forum.xda-developers.com/showthread.php?t=317070
GpsPasSion said:
Is there a way to add the "3G setting" directly in the Comm Manager as seen here : http://forum.xda-developers.com/showthread.php?t=354380 ?
Click to expand...
Click to collapse
Another way ...
Go to ... Start > Settings > Phone > GSM/UMTS Band , Set Network to "GSM" & Leave GSM to "Auto".
nightfear said:
Another way ...
Go to ... Start > Settings > Phone > GSM/UMTS Band , Set Network to "GSM" & Leave GSM to "Auto".
Click to expand...
Click to collapse
nice one..thanks
dapoldi said:
3. Polling frequency of the TD seems to be on the high side, f.e. it takes about 3 rings from someone before the TD starts "ringing", since voicemail kicks in @ ring 6 I miss a lot of calls.
I found a topic about just this problem with the touch(Elf) on sprint networks, with a quickcode (##7380# I think, well.. I'm not on sprint..so that doesnt work over here.. anyone with any clue would be welcome.. My current solution is disabling voicemail..)
Click to expand...
Click to collapse
that is driving me MAD at the moment. I'm missing almost all my calls.
Wish there was a way to change the amount of rings before voicemail kicks in.
please help someone!
Lord of the Badgers said:
that is driving me MAD at the moment. I'm missing almost all my calls.
Wish there was a way to change the amount of rings before voicemail kicks in.
please help someone!
Click to expand...
Click to collapse
ah found it, at least for UK Orange people:
Please bear in mind that the following code is only valid for phones on the Orange UK network.
The code to set the length of time your phone rings is:
**61*07973100123*11*??#
Where ?? is the time in seconds, e.g. to set the ring time to 30 seconds you would type the following code at the standby screen then press the green send button:
**61*07973100123*11*30#
To make your phone ring for only 10 seconds:
**61*07973100123*11*10#
The code works in 5 second intervals, i.e. you can set 5, 10, 15, 20, 25 & 30 seconds.
Click to expand...
Click to collapse
works fine. thank god.
Lord of the Badgers said:
that is driving me MAD at the moment. I'm missing almost all my calls.
Wish there was a way to change the amount of rings before voicemail kicks in.
please help someone!
Click to expand...
Click to collapse
go to the phone application
Settings->Services->call forwarding
Set the time to what you want
Arnon
Hey guys.
I cannot get this application to run on my dual! It just loads a black screen. It works though because I can slide to unlock it without being able to see the screen which isn't all that useful!
So is this just me?
Sam
Same problem on my Kaiser
Hi there!
I am having the exact same problem on my Kaiser phone.. :-(
Who can help?
Henk.
It's known bug with certain devices but here's a workaround disable Direct Draw:
Edit your registry, navigate to \HKEY_CURRENT_USER\Software\A_C\S2U2
Find the key DirectDraw and change the value from 1 to 0.
Funny enough on my dual I didn't have to do this tweak!
'slide' to unlock?
I assumed 'slide' to unlock was sliding the phone open..
after a couple of resets I found out that you had to 'slide' on the screen
I there really no way this to may it work with sliding the phone open,
thought this would be really nice..
Besides from this misunderstanding of mine it works fine, caller Id is very nice!
gfreek said:
It's known bug with certain devices but here's a workaround disable Direct Draw:
Edit your registry, navigate to \HKEY_CURRENT_USER\Software\A_C\S2U2
Find the key DirectDraw and change the value from 1 to 0.
Funny enough on my dual I didn't have to do this tweak!
Click to expand...
Click to collapse
Wow.
You are actually amazing for making that work!
You know, that may be one of the best answers I have ever recieved. Thank you so much
My Wing was doing this also. I changed the name from wallpaper.gif to Wallpaper.gif and it works fine now.
Worked!
Worked fine for me; thx!
works after the registry key change, but....
It works lousy if you activate the callerID. When you get a call , the internal phone app. takes over the S2U2, and after you finish the call the screen just remained in the position of the incoming call picture of the S2U2 and you cannot do anything except soft-reset. :-(
Does anyone has an idea or suggestion?
TIA/Zohar
sorry for my stupid q:
may i know why you choose s2u2 instead of the WM6 built-in key-lock feature? just due to big wallpaper instead of the Today screen, or some other great features attracted you?
Hey good question.
I prefer it because its a sleeker interface to go with a sleek device and also mainly because it annoys iPhone users that I know.
mini_man said:
Hey good question.
I prefer it because its a sleeker interface to go with a sleek device and also mainly because it annoys iPhone users that I know.
Click to expand...
Click to collapse
haha.. lol
i personally like the big caller photo most. yet i still can't make up my mind on using it for long term, because now sliding out the keypad can only wake up the device but no longer unlock it. and personally i still prefer using the green/red keys to answer/reject calls, which means the built-in key-lock feature can also do.
..and one more
It seems that all the keys and everything is locked except the iCube.
This can be activated even thouth the S2 is in keylock state.
zoharbl said:
It seems that all the keys and everything is locked except the iCube.
This can be activated even thouth the S2 is in keylock state.
Click to expand...
Click to collapse
(for Sprint Touch (Vogue) and Touch Dual (Nike))
you can lock the cube as well by adding this reg key:
[HKLM\Software\HTC\Biotouch\Disable4SpecificApp\S2U 2]
"ClassName" = "S2U2"
is the ' ' space at the end of the key name correct? 'S2U 2' or should it be 'S2U2'?
gmlogan said:
is the ' ' space at the end of the key name correct? 'S2U 2' or should it be 'S2U2'?
Click to expand...
Click to collapse
no space. just S2U2.
Hi all,
Sometimes my Touch Dual when gets a new SMS doesn't sound and/or vibrate. Even if I change the profile or do whatever it still keeps the same. If I reboot or just after a time it starts with sound again.... it just happens with SMS received, if I got a phone call it still vibrates and sounds. Any ideas? Thanks a lot!
No ideas? Can anyone please help?
Same problem here... can anyone please help?
Most of the time the light goes on and no sound or vibrating... other times it plays a standard sound and not my selected one for SMS receiving...
ya. same to me.. after I upgrade my htc touch dual to WM6.1 and change back to "old sms look" from the regisry.. it cant get any sound at all...
and I was try to go setting-> sound & Notifications - >under Notifications page, the Event part [Messaging:New text message] I was set the wav sound, same to all the MMS setting.. I try to set all the msg to alarm3, but also no sound at all
I've solved my problem by changing the register:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings
In this folder the value for SMSAvailable is 0. Change it back to 1!
In a thread I was told to change it to 1 to get conservation style sms, I believe.. never worked
ShortyVCC said:
I've solved my problem by changing the register:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings
In this folder the value for SMSAvailable is 0. Change it back to 1!
In a thread I was told to change it to 1 to get conservation style sms, I believe.. never worked
Click to expand...
Click to collapse
so mean we need to accept the new sms style only can get the sound.?
nyooooooooooooooooooooooooooooooooooo..
jinedward said:
so mean we need to accept the new sms style only can get the sound.?
nyooooooooooooooooooooooooooooooooooo..
Click to expand...
Click to collapse
What do you mean with "the new style"? After 5 o 6 SMS sound & vibration vanishes
I've got a such problem on my HTC Diamond
Sig. Gargiulo said:
Hi,
when i receive a new message a very little windows appears on lower left side of the home windows. This new stupid one probably replaces the extended normal one which appears when a new sms arrives and the text inside quotes the sms text.
Simultaneously when i set the ring off or vibration mode however the diamond ring with a new sms but at the max volume. It's crazy !!!
I tried to remove the last apps installed but the problem persists.
What can i do?
Thanx
Click to expand...
Click to collapse
It still happens with my nike!
i think i solved the same problem but i dunno whether it's only me or same with ur problem. try to leave your sms folder open. means just minimize it.. hope it will work.
ShortyVCC said:
I've solved my problem by changing the register:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings
In this folder the value for SMSAvailable is 0. Change it back to 1!
In a thread I was told to change it to 1 to get conservation style sms, I believe.. never worked
Click to expand...
Click to collapse
I've just solved the problem with this trick
Thanx !!!
ShortyVCC said:
I've solved my problem by changing the register:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings
In this folder the value for SMSAvailable is 0. Change it back to 1!
In a thread I was told to change it to 1 to get conservation style sms, I believe.. never worked
Click to expand...
Click to collapse
Thanks. This worked for me. I've outline my steps on my Sprint Htc Touch (htc 6.1 rom):
1. in regedit path KEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\SMSNoSentMsg, change DWORD data existing Decimal value=1 to 0. Perhaps for some people, if existing value=0, then change to
1. Some forums indicated value from SMSAvailable. But I didn't see that entry in my registry. I saw only SMSNoSentMsg under the above path.
2. On tab Settings: Sounds & Notifications\Sounds, check both on Programs and Notifications
3. On tab Notifications: Event\Messaging\New text message, choose an event(s)
After all 3 steps, text message inbound should work. I changed the value in step 1 back to original value of 1. Sound still works. I think step 1 somehow "wakes up" the notification sound config
After i finish call i see about 3 sec delay, and i can't repeat call or any action.
How to remove it delay ??
(please if possible registry tweak)
You can change that setting in Advanced Configuration Tool. In the "Phone" settings, end call delay default is at 3000, hence the 3-second delay. You can lower than number in the settings. Works great.
doesn't work, but i enter 0 sec
Ethermind said:
doesn't work, but i enter 0 sec
Click to expand...
Click to collapse
Did you try 1 second? That's what I have it set to, and seems to be working well.
hmm... doesn't affect...
Ethermind said:
hmm... doesn't affect...
Click to expand...
Click to collapse
One thing to keep in mind is that when changing the setting, you can't just type in the number. If you do that the setting won't stick. Instead, you have to use the up/down arrows to set the value.
Did you reset the device? It works for me.
Works for me too ...set it to zero (by typing in 0) and soft reset ...no more delay ending calls (answers quicker too)
Am using R3AA
works really great! is there also maybe an option where you can get rid of that beep beep beep after a ended call?
Does anyone know the registry key for it?
Mine doesn't have the option in the advanced tab. Just 'Reject call with text messge' & 'Add new phone number to contacts at end of call'
its not in the advanced tab. you have to use Advanced configuration tool...
Use the original winmo dialer not the beautiful one
Im using the dialer from PocketShield which has a pretty nice look in my opinion.
darfri said:
Use the original winmo dialer not the beautiful one
Click to expand...
Click to collapse
LOL you made it sound very unappealing.
Haxxler said:
Im using the dialer from PocketShield which has a pretty nice look in my opinion.
Click to expand...
Click to collapse
The latest pocketshield even suggests to disable the beautiful dialer. Have you done that?
Hi,
I just installed Shaps Advanced Config Tool, but the mentioned option under Phone is not there. Is there another Advanced Config Tool I don't know about?
Thanks
Marc
Figured it out myself =) Used an old version (2.2) instead of the new 3.3.
nevermind =)
wheezzl said:
Hi,
I just installed Shaps Advanced Config Tool, but the mentioned option under Phone is not there. Is there another Advanced Config Tool I don't know about?
Thanks
Marc
Click to expand...
Click to collapse
I downloaded it too and the option was there. 4th option under phone. "End Call Delay"
wheezzl said:
Figured it out myself =) Used an old version (2.2) instead of the new 3.3.
nevermind =)
Click to expand...
Click to collapse
Very good!
Steve_TLS said:
I downloaded it too and the option was there. 4th option under phone. "End Call Delay"
Click to expand...
Click to collapse
4th one down under phone, i have call id match: 8 ??