Hi all,
Sometimes my Touch Dual when gets a new SMS doesn't sound and/or vibrate. Even if I change the profile or do whatever it still keeps the same. If I reboot or just after a time it starts with sound again.... it just happens with SMS received, if I got a phone call it still vibrates and sounds. Any ideas? Thanks a lot!
No ideas? Can anyone please help?
Same problem here... can anyone please help?
Most of the time the light goes on and no sound or vibrating... other times it plays a standard sound and not my selected one for SMS receiving...
ya. same to me.. after I upgrade my htc touch dual to WM6.1 and change back to "old sms look" from the regisry.. it cant get any sound at all...
and I was try to go setting-> sound & Notifications - >under Notifications page, the Event part [Messaging:New text message] I was set the wav sound, same to all the MMS setting.. I try to set all the msg to alarm3, but also no sound at all
I've solved my problem by changing the register:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings
In this folder the value for SMSAvailable is 0. Change it back to 1!
In a thread I was told to change it to 1 to get conservation style sms, I believe.. never worked
ShortyVCC said:
I've solved my problem by changing the register:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings
In this folder the value for SMSAvailable is 0. Change it back to 1!
In a thread I was told to change it to 1 to get conservation style sms, I believe.. never worked
Click to expand...
Click to collapse
so mean we need to accept the new sms style only can get the sound.?
nyooooooooooooooooooooooooooooooooooo..
jinedward said:
so mean we need to accept the new sms style only can get the sound.?
nyooooooooooooooooooooooooooooooooooo..
Click to expand...
Click to collapse
What do you mean with "the new style"? After 5 o 6 SMS sound & vibration vanishes
I've got a such problem on my HTC Diamond
Sig. Gargiulo said:
Hi,
when i receive a new message a very little windows appears on lower left side of the home windows. This new stupid one probably replaces the extended normal one which appears when a new sms arrives and the text inside quotes the sms text.
Simultaneously when i set the ring off or vibration mode however the diamond ring with a new sms but at the max volume. It's crazy !!!
I tried to remove the last apps installed but the problem persists.
What can i do?
Thanx
Click to expand...
Click to collapse
It still happens with my nike!
i think i solved the same problem but i dunno whether it's only me or same with ur problem. try to leave your sms folder open. means just minimize it.. hope it will work.
ShortyVCC said:
I've solved my problem by changing the register:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings
In this folder the value for SMSAvailable is 0. Change it back to 1!
In a thread I was told to change it to 1 to get conservation style sms, I believe.. never worked
Click to expand...
Click to collapse
I've just solved the problem with this trick
Thanx !!!
ShortyVCC said:
I've solved my problem by changing the register:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings
In this folder the value for SMSAvailable is 0. Change it back to 1!
In a thread I was told to change it to 1 to get conservation style sms, I believe.. never worked
Click to expand...
Click to collapse
Thanks. This worked for me. I've outline my steps on my Sprint Htc Touch (htc 6.1 rom):
1. in regedit path KEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\SMSNoSentMsg, change DWORD data existing Decimal value=1 to 0. Perhaps for some people, if existing value=0, then change to
1. Some forums indicated value from SMSAvailable. But I didn't see that entry in my registry. I saw only SMSNoSentMsg under the above path.
2. On tab Settings: Sounds & Notifications\Sounds, check both on Programs and Notifications
3. On tab Notifications: Event\Messaging\New text message, choose an event(s)
After all 3 steps, text message inbound should work. I changed the value in step 1 back to original value of 1. Sound still works. I think step 1 somehow "wakes up" the notification sound config
Related
Some registry tweak or something?
weenter said:
Some registry tweak or something?
Click to expand...
Click to collapse
You just want the ringer to RING without any other indication of an incoming call?
or
U dont want an INCOMING CALL ALLTOGETHER?
I gather it is the Former coz In the latter simply turn On <flight mode>
U can also set the device to recieve calls without Ringing by setting it to Pick up after <zero> calls.
Using a handsfree here would be an advantage.
U wont Miss any call.
I just want the ringer to RING without any other indication of an incoming call. Is it possible?
weenter said:
I just want the ringer to RING without any other indication of an incoming call. Is it possible?
Click to expand...
Click to collapse
i'm also looking for a way to do this
Did anyone found a solution for this ?
texarcana said:
Did anyone found a solution for this ?
Click to expand...
Click to collapse
I doubt it... Seems kinda pointless, having the ability to tell you who is calling, but then deliberately turning it of..
yes, but when someone is calling, there is always a delay.
When you hear the first ring, the caller already heard it twice.
Maybe by disabling this, it would speed up the process a bit
texarcana said:
yes, but when someone is calling, there is always a delay.
When you hear the first ring, the caller already heard it twice.
Maybe by disabling this, it would speed up the process a bit
Click to expand...
Click to collapse
That's the network, not the device.
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
texarcana said:
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
Click to expand...
Click to collapse
Well... The cause may be that, but I doubt showing a caller ID screen will change the times....
texarcana said:
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
Click to expand...
Click to collapse
I agree with texarcana here, the lights begin to flash on my phone when it rings a good few seconds before the screen get around to displaying the incoming call notification.
This is on WM 6.1, on my new HTC Diamond Touch.
I assume that notifications such as an incoming call or text message are either
A) A windows message sent to a background service awaiting it.
B) An application is executed with parameters describing the event
In either case, i believe it must be possible to redirect the notification in the registry. However, if the notification method is at fault (ie causing slow response, most likely to be true if B above is true.)
I'm going to investigate, I'll post an update of my results.
Im really sorry to bump this really old thread but has anyone solved this?? I would like to disable the incomming call notification too.. cuz I just added a full screen caller ID, but the damn notification pops up and covers the photos of my contacts.. so whats the point of the caller ID if i, not gonna be able to see the pictures
well i know its in Hkey_curent_User\controlpanel\notifications\phone
but im not sure how to disable it...
or even more important (for me) only disable it for a certain #...? thanks! anyonbdy
To Diamond I found. cab which options are unblocking "flash light for." in SOUND & NOTIFICATION it didn't give but nothing. I dug around in the HKLM/Drivers/Builtln/Keylight and Keypad register and I turned off LED generally speaking but I blocked buttons
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
thanks, works for my htc pure with phonex
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
this will make the bubble of incalling to disappear??? if not who can i do it
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
Didn't work for my samsung i760, what about DispllayOrder? Set it to 0 too? Or what would that do exactly? I'm curious now, it's set to 1 so if all else fails, I could change it back to 1 again... I guess. I'd just like to know first before I go blindly jumping into something.. haha
Sidenote setting it to 0 did work I just had to reset my phone so remember to reset your phone after changing this, I see the curtain try to popup, or at least the frames but nothing after that... Although sometimes it does act buggy and I'll completely miss or be able to answer a call cause my phone will constantly viberate (No pickup on ringtone at all starting) then after the call is missed the viberating will stop but my phone will still be frozen... Thats when the screen is off though..
Okay after a few tests sometimes it does work and sometimes it doesn't work at all and the curtain will still show up... Then again screen off sometimes the phone wont ring at all, I'm setting it back to 1... LoL
I just wish there was a way or a more advanced notification manager, it should be just like being able to disable incoming text messages and disabling sent message notifications..
____
I'd love a fix for this too, as I already have a picture caller id with PocketX Photo Contacts Pro...
But it's annoying as all get out!! To put it politely, I slide to answer then I've got to press the left softkey too! In order to answer a call, if I could just disable the built in windows mobile caller id curtain then it'd be a heck of a lot easier...
Please let's get a scripter on this to start working their way around and tweaking it to be able to be disabled..
Thanks!!
________
As for ring delay which is also a few other posters concern of the phone taking it's own sweet time to decide when to start ringing... This is what I used for my i760, I'm sure someone here could turn this into use for any phone make and model:
Ring Time Limit Fix:
**772 [service code]
six zeros for the code (000000)
Scroll down with the d-pad till you see end of basic nam
hit right d-pad to change "exit" to "more"
hit middle d-pad to select
hit the down d-pad 76 times till it says slot cycle index
Change this to 1 or lower EDIT: By entering the value with the number pad and then you hit the middle d-pad to exit.
This changes the frequency at which the phone talks to the tower and will
start the unit ringing MUCH faster. the lower you go the faster but the more battery it uses. I find 1 gets the phone ringing within 3 seconds but doesn't hinder battery life.
Click to expand...
Click to collapse
I've got mine set to 0 though, but then again, I don't get very many calls, plus I have my phone charging a lot. Also I always carry around a spare extended fully charged battery in my holster... Usually my battery lasts a whole day... But with it set to 0 my phone picks up and rings at the end of the first ring on the callers end.
does vibration or popup notification of new messages/new mail work (both active and sleep state) on touch hd?
i do not get anything even i set it accordingly in the notification settings. all i see is a number pop up in touch flo tabs. deactivating touch flo does not help either.
any ideas?
Same problem here.
It worked sometimes, not it doesnt anymore and I dont know why (perhaps a confict with a program??).
Ascenca
sms notificatian not working anymore.
Same her not working anymore
its a bug that has been there since the HTC Diamond
fix?
anyway to fix it?
Please Help.
I cant live without sms notification!
There is a Registry tweak for the Diamond that fixes this - it should work on the HD too :
HKLM\Drivers\BuiltIn\RIL\DisableSMSWakeUpEvent
set to "1" by default. meaning NO wake up to SMS message
set to "0" to enable wake up
EDIT : This was referenced from a Thread on the Diamond Forum
EDIT : Actually, having re-read your problem, this may not fix it - sorry.
brodos123 said:
I cant live without sms notification!
Click to expand...
Click to collapse
Hd Tweak allows you to turn sms notification on.
Also make sure you have done
start--->settings--->phone---->services
then click on voice mail and text messages and then get settings.
Missing New Mail Missed Call Notification
I have the same problem phone does not display an new message or missed call icon in the upper tray. Seems to have happened after using HD Tweak and trying to hide the battery Icon, which is now in place of where the New Mail or Missed Call Notification Icon is normally displayed.
Anyone else expereincing this problem and any ideas for a solution?
Thanks.
Notification Problem Solved
Disconvered that I had an extra battery icon in upper tray from SPB plus. Removed thatand everything is now working fine.
My partner received his shiny new HTC Touch HD last week and after a few hours realised it was giving no notifications of text messages. Absolutely nothing as people have described here! It was new out the box and was making no noise, no notification on the Touch Flo, not even the standard Windows Mobile icon at the top. We tried every setting we could think of, and passed it to a friend whose had his HD for a couple of months now, who also couldn't find any good reason for its silence.
We gave in and hard reset the device (since it was only a couple of days old and he had yet to fill it with stuff!)
I'm glad to say, the hard reset solved all! No idea what the problem was, but it now gives all the correct notifications and obeys settings.
Just thought I'd share this in case others happen upon this problem since the thread gave us hope (in that others had the same problem) but no solution. I realise a hard reset isn't an elegant solution, but it did fix the problem
Fixed mine
Pauls suggestion for the diamond worked for me. My Touch HD running Energy ROM (WM6.5). I hadn't even noticed since my last ROM upgrade (i pressume) but my phone only alerted me to a new SMS when I had it switched on (not in stand-by). When I did notice I checked all the settings I could find for alerts and notifications, sms etc. The following registry tweeks fixed mine:
Paul.Ferrari said:
There is a Registry tweak for the Diamond that fixes this - it should work on the HD too :
HKLM\Drivers\BuiltIn\RIL\DisableSMSWakeUpEvent
set to "1" by default. meaning NO wake up to SMS message
set to "0" to enable wake up
EDIT : This was referenced from a Thread on the Diamond Forum
EDIT : Actually, having re-read your problem, this may not fix it - sorry.
Click to expand...
Click to collapse
Hey peeps
I've found this registry tweak in the Kaiser forums, but worked like a charm on my original Iolite too:
Originally Posted by clickdeath
There is also this:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s\OEM\SMSInboxThreadingDisabled
DWORD
value set to 1.
You have to create the OEM folder yourself but apart from that it seems to work okay.
Click to expand...
Click to collapse
I didn't even had to reset or delete my device to see the changes. Just close all programs and I made the tweak with Total Commander (from Ghisler).
Greetz
U can dissolve this with advancedconfig 3.3
.NET 3.5 must be installed.
Greetings Mirko
one step ahead
Thx for the information.
After adding the reg key, my device playes the "new sms arrived" sound. Great.
But if I miss the sound, or the ringer is turned completely off, I do not see an indication for the new message unless I manually activate the screen.
I would also like to have the LED (on the top of the device) indicating that there is a new unread message.
Any idea?
Greetings!
Woko
Wokoloko said:
Thx for the information.
After adding the reg key, my device playes the "new sms arrived" sound. Great.
But if I miss the sound, or the ringer is turned completely off, I do not see an indication for the new message unless I manually activate the screen.
I would also like to have the LED (on the top of the device) indicating that there is a new unread message.
Any idea?
Greetings!
Woko
Click to expand...
Click to collapse
The iolite have only one LED, the other is a light-sensor to correct the brightness automatically.
Try this: Start - Settings - Sounds & Notifications.
Mirko
Thanks a lot for this nice hint!
I really started to dislike the threaded way already.
But I had to reset my Iolite to swap to unthreaded sms.
Hi -
Having a problem with SMS notification. Don't remember whether it started after I installed HD Tweak or before.
If I specify via HD tweak not to wake up a phone when SMS arrives - I receive no sound/vibrate notification on sms unless I switch on the screen.
If I specify to wake up a phone, then everything works fine - vibrate works, BUT the screen also switchs on and so I can make accidentally touches
So is it possible to have Vibrate, Sound and NO switching on the screen when I receive SMS on the HTC Diamond2?
Yeah, i never found a solution to this myself.
So i've installed Pocketshield (disabled everything but the slide-locking), and enabled the WakeUp in the registry.
This is the default behavior, at least on my device. When I first got the device it annoyed me that I had to turn on the device manually to read a message, so I changed the reg value that controls the screen on on new messages. Unfortunately there doesn't seem to be a similar fix (reg value) for incoming emails though.
Regards,
PK
wizionus said:
Hi -
So is it possible to have Vibrate, Sound and NO switching on the screen when I receive SMS on the HTC Diamond2?
Click to expand...
Click to collapse
what reg tweak did you use?
or do you mean that you have enabled switching on the screen - in the same way as it is done via HD Tweak?
wizionus said:
Hi -
So is it possible to have Vibrate, Sound and NO switching on the screen when I receive SMS on the HTC Diamond2?
Click to expand...
Click to collapse
My device is stock and it has that behavior default! When I receive a SMS, a sound and vibration announce me, while the screen remains off!
Hi!
The one described in this thread: http://forum.xda-developers.com/showthread.php?t=506416
Regards,
PK
wizionus said:
what reg tweak did you use?
or do you mean that you have enabled switching on the screen - in the same way as it is done via HD Tweak?
Click to expand...
Click to collapse
to check “Vibrate” from Setting/Sounds&Notifications.
Then you can have " virbrate function " under suspend mode when SMS incoming~ have fun~
Hi
You should be able to fix these problems be increasing the "resuming from suspend timeout" values under Power using Advanced Config. By default it is one second which often isn't enough time for the phone to sound/vibrate when an SMS is received so try changing it to 10 or 15 seconds. When it is one second the phone goes back to sleep too quickly and sometimes the sound or vibration hasn't had to time be triggered.
Regards
Phil
paalkr said:
Hi!
The one described in this thread: http://forum.xda-developers.com/showthread.php?t=506416
Regards,
PK
Click to expand...
Click to collapse
nice..thats exactly what i needed....
i think you could switch it on using reg editor...
it posted in the earlier post
Hello,
I don't get a sound notification when i got a new mail or sms.
I used the led notification mod, witch is working.
The vibration works also.
System vulome is 20% Telephone volume = 80%
I did try to select an other "ring tone" this didn't work.
How can i get this fixed?
2nd side question, I want Flash to work on the phone, fore opera and ie.
Did find the operaflashfix, this didn't work.
ps, have the newest radio rom and NL rom.
I had the same problem but I downloaded sms fix from HTC website and now everything is ok. So maybe that is solution
link to website:
http://www.htc.com/uk/SupportViewNews.aspx?dl_id=849&news_id=475
I'd rater not use this fix, because i have no problems with sending sms.
And I heard that there could come more error's on using this fix.
any other methods?
HellStorm666 said:
Hello,
I don't get a sound notification when i got a new mail or sms.
I used the led notification mod, witch is working.
The vibration works also.
System vulome is 20% Telephone volume = 80%
I did try to select an other "ring tone" this didn't work.
How can i get this fixed?
2nd side question, I want Flash to work on the phone, fore opera and ie.
Did find the operaflashfix, this didn't work.
ps, have the newest radio rom and NL rom.
Click to expand...
Click to collapse
Could it be you set to "Vibrate" > Only !!
Try Goto > Settings > Sound & Display > click on "Notification sounds" > click on "New message" > Vibrate (set to "On" not "Only")
HellStorm666 said:
System vulome is 20%
Telephone volume = 80%
Click to expand...
Click to collapse
I believe that notifications use the system volume. Could it simply be too quiet? (I may be wrong about that)
jaqubek said:
I had the same problem but I downloaded sms fix from HTC website and now everything is ok. So maybe that is solution
link to website:
http://www.htc.com/uk/SupportViewNews.aspx?dl_id=849&news_id=475
Click to expand...
Click to collapse
The SMS Hotfixes is pending on individual device (HD2), lots of them facing problem after install the fix. If your device works normal, then good luck to you.
In case you faced problem later on, please *flash the "New ROM Upgrade 1.66.707.1" majority feedback is positive and SMS problem resoled.
Cheer
*Flashing = HARD RESET (Just in case you not aware)
Dude, you're the life saver
In dutch it say's enkel, like one time, so i thought, yes one singel vibe and a sound is enough.
But it means only like, no sound
Thanks!