Hello there,
as many of you may already know, the HTC Prophet shares a lot of its hardware with the HTC Wizard. We, the Linwizard Project, aim to port Linux to this OMAP-platform, as other users did port Linux for PXA-based devices like HTC Universal...etc.
I just want to invite you Prophet Users to checkout our project. Our procedure and yet available kernel should also run on your phone....
http://linwizard.sourceforge.net
Greetings,
Maui
Hi, I want to install Linux on my new Qtek s200, but I don't know how to do that. What is the project's actual status? I hate WM5
Is there any updates to this as yet? I would really love to see this ported/Running to my HTC prophet
Running it now
Yes, there has been some progress... the basic PDA functions are available: X runs, touchscreen works making it possible to run GPE on it:
Here's a link to a recent build which works reasonably well. It contains the f*ugly GPE shell so it is not pretty to look at, but it does work.
http://tinderbox.dev.gentoo.org/embedded/linwizard/gizard-20081108.tar.bz2
To try this for yourself, download the image, unpack the tarball and copy the entire contents to a directory on your SD-card. Go into that directory and run haret-0.5.2.exe. Run the 'default.txt' configuration.
Once the kernel boots it will start a telnet daemon on 10.100.0.1:23. Configure your side of the rndis network to be 10.100.0.2 (ifconfig usb0 10.100.0.2 on Linux, whatever on Windows) and telnet 10.100.0.1. Login as root, there is no password. Once logged in run startx to get GPE up and running.
Once GPE runs you'll want to add the onscreen keyboard to the panel. To do this tap-and-hold on the taskbar (bottom of screen) and add the 'input selector'. This gives you an on-screen keyboard just like the WM-one. Add a terminal launcher as well to get access to an xterm.
If all this is gibberish to you you might want to learn some unix/linux before you try...
Thanks alot it works on my prophet it's very fast to but am unable to login as root is there a way I can login to linux without using typing root? if not can u help me with the telneting into it please what software do I have to use on my pc it's a Windows is there anysite with instructions? I like it alot but since the prophet dont got a keyboard on it's own am not able to login please help and Thanks in Advance
Booting and running Linux on the Prophet
Most of what you need to boot and run Linux is described on the linwizard project site:
http://linwizard.wiki.sourceforge.net/
The version offered on the site is out of date - it does not do much more than boot the kernel which you can control through SSH (on 10.100.0.1:22).
To do some more with Linux you'll want to get a newer release. The one mentioned in the previous posting is a good example of where the project is now: relatively complete PDA-support but no real GSM support - so you can not use it as a phone...
To see Linux in action you download the tarball, untar it on your SD-card (either in a card reader on your PC or by untarring it on the PC and transferring all files to a directory below /Storage Card/. Once that is done you are well advised to do a soft reset to clear some memory as haret - the program used to push Windows Mobile out of the way and replace it with Linux - likes memory. After the (optional but advisable) soft reset you take your $favourite_file_manager to the directory where you put the contents of the tarball, execute haret-0.5.2.exe and run the default configuration (just click Run). Linux should boot, albeit slowly (it takes a long time to read the initrd - initial ramdisk - from the SD card). If you get a white screen which stays white for a long time you might as well reboot and try again. If you get a screen with a penguin with a hat on you're in. Plug in the USB cable if you haven't done that yet. You'll be staring at a login: prompt with no obvious means to type anything anywhere... that is because this Linux distribution is made for the Wizard instead of the Prophet, and the Wizard *does* have a keyboard. For now you'll have to resort to telnet to login and get things going. The phone is now listening on the cdc_ethernet interface (over the USB connection) on IP 10.100.0.1 so you'll want to configure the PC-side of the connection to something within that network range - 10.100.0.2 seems a logical choice. Configure the PC-side of the connection with IP 10.100.0.2 (ifconfig usb0 10.100.0.2 up on Linux, many many mouseclicks in the network manager on Windows). Once you have the network configured you can login with *telnet* (NOT ssh as mentioned on the linwizard site, the gizard tarball only has an active telnet daemon!), username is root, there is no password.
Once logged in use 'startx' to get the GPE shell running. It will complain about not being able to find a keyboard. The 'X' cursor appears, follwed shortly by the butt-ugly GPE interface. Once in the shell you can add a keyboard to the taskbar (tap-and-hold, choose add->input manager). There's more stuff to add, like a terminal (always handy) etc. Wifi does not work yet, GSM does not work yet, you just got yourself an iPaq...
If you're looking for eye-candy this is not it - yet. But as it is Linux, and free, and open, it can become anything you want it to...r
Am still getting error when trying to connect to my prophet useing usb is there anyway anything I need windows cant find the drivers is there a site I can download one from that supports my HTC prophet? And I tryed to connect to it but no luck I change my ip address to 10.0.0.2 255.0.0.0 and tryed to telnet to 10.0.0.1 but nothing, is there anyway to ping the device to see if it's up and running am upset, you sure there is no way to use it without having to login as root? This is giving me stress but al keep trying but am sure am missing somthing but what is it do you know? BTW I used the Drivers from http://forum.xda-developers.com/showthread.php?t=385129&highlight=linwizard&page=4
hope thats works for the prophet if not can you please help me find a driver for my prophet thanks again and good work
Sorry I got it to work I made a mistake its ip address 10.100.0.2 255.255.0.0 telnet 10.100.0.1 it works I even uploaded some pictures of it enjoy
I used a Nokia 3595 to take the pictures
just more pictures
Just a more pictures I love it I wish we can use it as a phone
They were taken with the Iphone
if Linux works on the HTC prophet then the Google operating system andriod must work to right? If so any information about it being ported to run on our phones?
hi all, i'm trying to make linux booting, but as just i start the haret and press run to execute the default.txt, it tell me :
kernel syncing panic.... and reboot after 30 seconds
any suggestion? i'm using vista 64bit and a qtek s200 wm6.1
Well am not to sure about this but al try to help Now tell me first did the linux boot on your ppc? to the screen were its asking for username? if so its ok if Not and it resets your mobile then something is wrong tell me what does it say and to tell net to it first you need the drivers did you get it? if not al post a link to download it ok I never had that problem before try running it on your SD card did you download all the files needed? I just updated my prophet rom so al try it my self it could be a firmware problem al try my best to help you ok
umh i havent installed any driver on my pc...... on the profhet, all i do was extracting files and run harted 0.5.2 .... and then press run. shell start, but then i got this error, i think it's more a pc-phone related problem..... i'll try do some other test
PS: telnet or ssh doesnt work
when i had BA phone, i was able to install linux on it, but i had just to start harted and all was working then.
Well it could be a ROM issue try to close unused programs it might help were is the files located? in the main memory or storage card? Anyway keep trying I don't understand much the drivers I posted a link for it already read my older replys ok And try a different ROM becouse am not getting this problem on mines
is it already found how to call with linux?
that is fantastic, I will refresh my Xda neo
Hi everyone!!
I'm trying to boot linux on my device, but when I type "startx" it not start the GUI..
Which version did you try??
To boot linux, I always need a pc to do the login??
Hi, i have one prophet and yesterday runned one old version of android (0.8 think), i follow one tutorial of this forum(think, i visited a lot of web for this...) plus to it one haret(0.5.0 i think because download a lot of haret) and android runned in my prophet..but it were very very very slow and i'dont like it...
How can i put GPE in my prophet?
can i make it with linwizad 0.2.0?are all necesary files into?
is need one pc with linux for start it(i don't have it, any solution)?
Thanks
PS Sorry about my bad english
I found this in the web:
http://usblinux.org.ru/archives/category/setup/from_windows
http://anterior-linuxlive.blogspot.com/200...fiish-m700.html
http://4pda.ru/forum/index.php?showtopic=89832&hl=linux
Can it help us?
I would like run linux in my prophet..but i never use Linux...
Is possible OPIE in prophet?
Also this:
http://4pda.ru/forum/index.php?showtopic=55392&hl=linux
Is interesting post #10 OpenMoko s100...not?
Hi all,
can somebody tell me pleasa how I can enter a username when I'm using the fileExplorer and tapping "Menu->Go To->Open Path->\\fritz.box\Media"?
My WinMobile only asks for a "network password" but I'm not able to enter a username.
Thanks,
Halla
i would make an user on your pc by the same name as you pda
or use total commander belive it got better networking options then explore
I'm have Ubuntu 11.10 that runs from the external sdcard but have problem login in can someone please tell what to do I'm using sp3dev kernel and rootfs
Try username :ubuntu pass:toor
or. username :ubuntu: password ubuntu
or username :alex and: password alexander.
Or. username alexander password alex
gears177 said:
Try username :ubuntu pass:toor
or. username :ubuntu: password ubuntu
or username :alex and: password alexander.
Or. username alexander password alex
Click to expand...
Click to collapse
i know the login name and password already
when i boot in ubuntu 11.10 the only thing i can see is a computer logo that says ubuntu 11.10 then i press ctrl+alt+f1 and it takes me to a terminal (i guess) after that it ask me for login name and password but after that instead of taking me to a a normal desktop it just says welcome to ubuntu and thats it
what i wanna know is how to pass that and go to the desktop
ok i know how to get to xfce gui already but can someone please help me ive been googling like crazy and reading threads and nothing.
i cannot set a wireless connection, the freaking panel is a little square and do nothing and the language i cannot change it
i know some one out there got it runnung and fully working you can pm me or post a link that i can follow please
Sorry I'm nor sure I got it running natively using http://forum.xda-developers.com/showthread.php?t=1158260
I used the tut on page 36
I have xoom wifi mz604.
I have tried to use ubuntu installer:
https://play.google.com/store/apps/details?id=com.zpwebsites.ubuntuinstall
i dont have any problem,but i cant figure out how to connect with vnc.
what i need to write in the android vnc?
nickname
password
address
port
username
how to know my address?
and password?
thanks..
password is "ubuntu"
then press "connect"
Do Not Post the Same Questions in Multiple forums
Hello,
Recently i got root access to my modem Huawei HG532e using telnet and the "welcome to shell" string with help from one member of this forum, thank you for that i you are reading this
Now, checking all the things inside de modem's filesystem i found that in the curcfg.xml file in the modem is the CWMP TR-069 configuration to connect to the ACS server, the XML contains the URL cwmp.telmex.com and the username and password.
I had success changing the CWMP server for a fake one using a PERL script in my Kali virtual machine, i could get the Inform response from the CPE or the modem with some valuable information about the modem and system.
Now what i want is to connect to the real server using the credentials in the XML, i heard about some TR-069 Client implementations and Server ACS implementations but i had not success trying to connect to cwmp.telmex.com, i entered the credentials but when it loads i get an error saying that the servlet does not accept the GET method, and through POST i get nothing but a blank page.
Any ideas of what can i do to successfully connect to the ACS Server and weather it is going to be helpful to get some extra information, i mean, i heard about one 2wire modem that TELMEX used a few years ago that allowed access to a "secret" site/port to manage the modem remotely, i would like to know if it is possible to do the same for the HG532e modem that a i currently have