Cmd> lnbs SPL-1.01.nbs 50020000
:F=SPL-1.01.nbs
:A=50020000
:O=00000000
:L=FFFFFFFF
start NB image downloadS
Load ADDR: 50020000 Length: 402C4
H***
SPL flag is incorrect, please check your SPL is correct.
Write NAND error, addr=0x50020000
Error !! The image must be in ROM area.
BTW
I want to update my sys to WM6.1
What does this mean?
I wanna to change my spl to 1.01
my herm200
IPL-1.04
SPL*2.01.olipro
I am being online to wait your answers
thanks
Related
I followed the instructions on http://opencodesolutions.com/~ronswens/Tutorials.htm
I am damn sure that my SDA has SuperCID and SPL 1.01.0109 instead of the original SPL 2.x. The tri-colour screen now shows:
Typhoon IPL 1.00
Typhoon SPL 1.01.0109
Typhoon IU
USB
... which should be correct.
Now I'm stuck on the last few steps which involves using the Multi-Port TTY via USB. This is what I get:
| c:\wm5.bin
Invalid command : | c:\wm5.bin
For a help screen, use command ? or h
Cmd>| c:\wm5.bin
Invalid command : | c:\wm5.bin
For a help screen, use command ? or h
Cmd>
Am I doing something obviously stupid?
My T-Mobile SDA has the latest German T-Mobile ROM (12/2005) from https://after-sales-service.t-mobile.de/eg_...obile/t_sda.htm
Please help!
It turns out that it WAS something really silly:
The "l" before the file path (c:\xxx.bin) is a lower case of "L", not a capital "i".
:lol:
Hi all,
I've tried to refresh my old SDA ROM from wm5 to wm6 this morning but after follow steps from http://forum.xda-developers.com/showthread.php?t=317209&page=9 my mobile start with typical tricolor screen with :
IPL 1.00
SPL 1.01.0064
I've tried to flash with mtty1.42 but program return :
l c:\wm6.bin
clean up the image temp buffer at 0x8C080000 Length 0x01B00000
MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Could you help me ?
Thanx
Hi!
You have need it spl flashing!
http://www.geocities.com/gggbitonti/typhoon.htm
Follow the instructions!
Thanx for your reply Dibi,
I need to have my SDA working to use Patched_RUU.exe, but mine still start with tricolor screen :-(
Brother i am upgrading my device it stoped at 2% now its dead only goes to bootloader show
ipl 1.81.00001
spl 1.81.00001
i master reset but nothing happened i flash all roms on wiki nothing happened always say invalid tool
i need this rom because this has previous this
Rom version 1.8.415.2 wwe
Rom date 11-3-06
Radio 02.71.90
protocol version 4.1.13.31
EXT Rom 1.8.415.102
Thanks in advance who help me in this case
I have another set of that how can i read other set rom and flash in to that set
Was it CID locked? did you buy the phone r did you get it with a subsciption?
oddball1 said:
Was it CID locked? did you buy the phone r did you get it with a subsciption?
Click to expand...
Click to collapse
Not it is Not Cid locked & Also Not Sim Locked.. yes i buy from a shop in pakistan but when i upgrade i get problem
I also have bricked my Herald after upgrading to Aserg but nothing now ,,only green screen and off ...
it was CID locked
from Mobinil Plz Help
zubi1984: i had the same problem.
try mtty.exe (use wiki), and try the commands for it.
if it says something clearly, then you can -somehow- unbrick your device.
if it gives error..
-this happedned to me-
you should bring it to the service, with warranty.
if you are lucky, they will fix it to you without price.
i hope you have warranty, because the man in the service said that i really fuc*ed it up... the new motherboard would have been very expensive.. without warranty
so first of all, calm down, and let's start reading about the upgrade, read a lot, and go to another forums, maybe somebody can help to you unbrick your device
____
my device said:
error 30* invalid upgrade tool (for any roms)
only in bootloader mode running
hard reset failed
reset does not works
no charge lights on charge
mtty.exe error, commands: no answere.
pulyka
Hi pulyka, Can you Please tell me about commands for mtty.exe..what to write inside te command box exactly ,,
any more details about "mtty " would be thankful
for me:
Cmd>info 1
Invalid command : info 1
For a help screen, use command ? or h
Cmd>info 2
Invalid command : info 2
For a help screen, use command ? or h
_____________
this is wrong.
___
read it carefully!
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
try it, but in your own risk..
unfortunately i am not an expert in this..
some people helped me in a hungarian forum.. and they said, my pda is bricked completely:S
if mtty working properly:
sb
I already connect to USB!
Cmd>info 0
GetDeviceInfo=0x00000000
Wizard
Cmd>info 1
GetDeviceInfo=0x00000001
2.21.0000
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x1EB80000 Bytes
HTCSWIZTMO07 â-r€HTCE
Cmd>info 3
GetDeviceInfo=0x00000003
this is died device:
info1
Invalid command : info1
For a help screen, use command ? or h
Cmd>info 1
GetDeviceInfo=0x00000001
2.24.0000
Cmd>info 0
GetDeviceInfo=0x00000000
Wizard
Cmd>r2sd all
***** user area size = 0x1DE40000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
GetDeviceCID: Error - InitDecoder
GetDeviceCID: Error - InitDecoder
You didn't get the proper security level to download a specific image
Cmd>
pulyka
Hello friends i'm italian and sorry for my english.
I have a problem with my hermes200.
I have flashing on my tytn a rom kitchen using "package tool by bepe" with nb IPL, SPL, Mainsplash, Subsplash, ExtROM and GSM extrated from original rom htc tytn wm6 and a OS.nb extrated from rom kaiser ITA wm6.1.
When the flashing is termined the hermes don't start: push power botton but the screen is black and only green light is ON.
I have flashed original htc hermes wm6 but i have "error 226 flash write" when the process is at 89%.
I have IPL-1.04 and SPL-2.04. CID.
SPL 2.10, SPL 2.20, SPL 2.30 are not possibile to install.
i have try command with mtty tool:
- task 32 -> FF
- task 28 -> format storage success
- task 2a -> fix bad block
- info 8 -> much bad block Os Win CE
I've try to reflash the original rom but the problem is the same
The battery don't possibile to charge and level should be of 40%.
Help me please....
Tanks!!!
here is my problem
stuck in bootloader.
I have a HTC Athena x7500
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed! or on my pc has a mesage error 244 invalid model id
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I tried to fix the problem with mtty
cmd> task 32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
helpe me plaise::crying:
it's been two year since I looked for a solution
sorry for my bad Englis
thank you in advance
Try This!!!
schnieder said:
here is my problem
stuck in bootloader.
I have a HTC Athena x7500
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed! or on my pc has a mesage error 244 invalid model id
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I tried to fix the problem with mtty
cmd> task 32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
helpe me plaise::crying:
it's been two year since I looked for a solution
sorry for my bad Englis
thank you in advance
Click to expand...
Click to collapse
try this,
here's an experimental program I made to make the process more automatic so users can fix their own wifi without our help.
this is good for both corrupt modelid and corrupt wifi, and fixes both at the same time.
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
NOTE, the command starts with a lowercase "L", not "I"!
WARNING: PLEASE DO NOT MIX UP THESE TWO DIFFERENT COMMANDS!!!
if this info helps: most people will have SPL 3.xx, and if you have AP4 (not vanilla) already running then you're definitely 3.xx
13. mtty will popup a window asking "OK", you press OK!
if you get "Fail to synchronize with the host (1)", then make sure you did follow step by step. if still same error, try placing mtty and the bin file under C:\.
14. now the file downloads, if mtty reports it flashed the file, and at the end "code entrypoint unknown", then that's it, now boot back to WM and see if wifi works.
thank you for the answer
I tried with mtty and mac1.zip
here are the step
Cmd> task32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
I do not have the mac address of my wifi on the label of my pda so I put j 11 11 11 11 11 11 is what it must have the real mac address
I do not know what to do
It's been 4 months I'm looking for a solution for my pda
help me please