i just buy new battery and when i put it into ac charger nothing happens. what i can do now?
I've read about ROMs where the charging icon won't turn on during charging, but the battery is still being charged...
Can you turn the phone on to check the battery status properly? It should turn on even if the battery doesn't work, as it'll be powered by the AC charger.
my wizard also wonot turn on , there is nothing , no usb conn., no charging , nothing
please any help ??????????????????????
Same situation. My mini S was going bonkers back then as the screen no longer aligns when you shift to using to the keyboard and back. Forgot to recharge it as was frustrated not being able to use it properly and after that it simply won't charge anymore. Did the battery jump-start thing and even bought a new battery plus recharged the internal battery yet it still won't turn on. No LED red light or anything.
Has anyone come up with a solution yet?
Related
I put my phone (T-Mobile MDA VARIO) on charge last night before I went to bed, nothing strange about that, but this morning the phone was completely dead ,wouldnt charge, no lights, wouldnt boot etc.
After searching this forum I found what I thought was the fix for a dead battery (3 AA batteries/wires etc) I did this and the phone now boots and says its chargeing, but only if I charge using USB, it wont do anything if I use the wall mains charger
If I take off the wires/AA bateries, the phone shuts down and wont charge, but as soon as I put the wires/batteries back on it works as normal.
While the phone is running I looked at the power application & it shows the battery chargeing, but wont hold any charge at all
obviously I cant walk around with 3AA batteries & 2 wires attatched to my phone.
does anyone have any suggestions please
cheers
Phil
I'd look into a new battery...
If this were a notebook battery I would say the cells had collasped.
exact same thing happened to me last night. I think there is an issue with charging the wizard when its off, like it doesn't know when to stop charging and it overloads the battery. Do you happen to have the link for that 3 batteries and the 2 wires trick, I want to give it a go. Thanks.
SITUATION
My Cingular 8500 does not power on. I have tried connecting it to wall charger as well as USB cable. The red or the orange light also does not come on. I tried all resets also but nothing worked.
BACKGROUND
a. My phone suddenly went off when I was opening the sliding keyboard. It had a decent (60%) charge at that time. After this it refuses to come on.
b. Only addition to the phone in the last 3 months has been a 2GB MicroSd Card. I inserted this card 4 days back and it was working fine.
c. The device is around 6 months old (but its unlocked, running WM6 and does not have any warranty)
d. I have been using the original wall charger to charge this phone regularly.
HELP REQUIRED
1. Is there a way to check if the problem is with the battery or with the phone? I do not have a spare battery.
2. Should any light come on if I connect the phone to charger without the battery inserted in it?
Thanks!
Try this:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
i have the same situation going on ... except with mine the screen faded out...it came back on once...and faded out again and will not turn back on.. when i put it on the charger it was a red light.. and will not turn on or soft reset, or enter bootloader or hard reset. .. in addition i tried the method above and nothing has worked.... any other suggestions...my phone was working fine when this happened out of nowhere... i dont have insurance either i bought the phone from someone off of craigslist..help is greatly appreciated
I am having the exact same problem, I had about 30% charge, then it just shut off, and now will not come back on under its own power or via USB nor charger. I tried connecting the charger then inserting the battery, but I do not get any indicator lights at all.
I was running WM6, and the most recent thing installed was the pointUI home screen replacement app.
has anyone experienced this before?
theconcon said:
SITUATION
My Cingular 8500 does not power on. I have tried connecting it to wall charger as well as USB cable. The red or the orange light also does not come on. I tried all resets also but nothing worked.
BACKGROUND
a. My phone suddenly went off when I was opening the sliding keyboard. It had a decent (60%) charge at that time. After this it refuses to come on.
b. Only addition to the phone in the last 3 months has been a 2GB MicroSd Card. I inserted this card 4 days back and it was working fine.
c. The device is around 6 months old (but its unlocked, running WM6 and does not have any warranty)
d. I have been using the original wall charger to charge this phone regularly.
HELP REQUIRED
1. Is there a way to check if the problem is with the battery or with the phone? I do not have a spare battery.
2. Should any light come on if I connect the phone to charger without the battery inserted in it?
Thanks!
Click to expand...
Click to collapse
The Power LED should light up "red" other than that your wont get any juice. And read my second reply, try radioshack
Eamonn said:
I am having the exact same problem, I had about 30% charge, then it just shut off, and now will not come back on under its own power or via USB nor charger. I tried connecting the charger then inserting the battery, but I do not get any indicator lights at all.
I was running WM6, and the most recent thing installed was the pointUI home screen replacement app.
has anyone experienced this before?
Click to expand...
Click to collapse
It wont power on threw charger without a "good" battery plugged in.
Sounds like u might have a bad battery. Happend to a friend of mine "different phone" just go to a local Radioshack If they have your type of battery and have one in stock they will most likely let you try one on your phone. If not just go to ATT wireless store and see if they have one you can try and buy.
demo23019 said:
The Power LED should light up "red" other than that your wont get any juice. And read my second reply, try radioshack
Sounds like u might have a bad battery. Happend to a friend of mine "different phone" just go to a local Radioshack If they have your type of battery and have one in stock they will most likely let you try one on your phone.
It wont power on threw charger without a "good" battery plugged in.
Click to expand...
Click to collapse
I really hope thats the problem because it's an easy solution, otherwise I fear it might be toast. thanks for your advise
No light when connected to charger
Thanks all for your responses!
markafreeman said:
Try this:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
Click to expand...
Click to collapse
Dear Markafreeman, I tried the entire routine above but no help.
demo23019 said:
The Power LED should light up "red" other than that your wont get any juice. And read my second reply, try radioshack
It wont power on threw charger without a "good" battery plugged in.
Sounds like u might have a bad battery. Happend to a friend of mine "different phone" just go to a local Radioshack If they have your type of battery and have one in stock they will most likely let you try one on your phone. If not just go to ATT wireless store and see if they have one you can try and buy.
Click to expand...
Click to collapse
Dear demo23019, I am not sure if I understand the above correctly. Should the Power LED light up "red" when battery is not inserted?
Once I connect the phone to charger (wall or USB), without the battery inserted in it, no red light comes on.
Does this mean that there is some problem with the phone hardware?
theconcon said:
Dear demo23019, I am not sure if I understand the above correctly. Should the Power LED light up "red" when battery is not inserted?
Once I connect the phone to charger (wall or USB), without the battery inserted in it, no red light comes on.
Does this mean that there is some problem with the phone hardware?
Click to expand...
Click to collapse
Yea the power LED should light up red with out a battery plugged in. Check the usb plug on the bottom of your phone, make sure the middle piece inside is still there and didnt break off.
demo23019 said:
Yea the power LED should light up red with out a battery plugged in. Check the usb plug on the bottom of your phone, make sure the middle piece inside is still there and didnt break off.
Click to expand...
Click to collapse
Oops. My phone's power LED does not light up when I connect it to the charger without the battery inserted in it.
I have checked the following :
a. usb plug is fine (I checked it by plugging it into the Y cable for the USB charger. The LED on the Y cable lights up when I connect the USB plug into it
b. The middle piece inside the socket at the bottom of the phone is still there and shows no signs of damage.
c. The wall charger is also working fine.
Does this conclude that the phone has a hardware fault and this is not linked to the battery being dead?
Similar Problems
I just had the same problem. I had it happen to my Att Tilt and then to my cingular 8525. You should check out this thread and maybe post your info there too, it would be nice to see everybody post in the same thread so we can figure out what's going on.
http://forum.xda-developers.com/showthread.php?p=1783005&posted=1#post1783005
yh
yh i got the same problem, i touched the power button so it wld go into standby, and it then refused to turn back on, even when i soft resetted it. Plugged it into the wall charger without the battery and there is no red power light coming on.
I've got a MDA Vario II and though im gettin a replacement, it kinda sucks as it seems im gna lose all my data
can we try to determine in more detail what people installed before they experienced this?
I just pulled it apart, and cleaned the inside to no avail, nothing seems to be awry, atleast not to my untrained eye, however it did get me thinking.
I listen to music on my tytn all the time, and over time the usb connector has become quite loose, frequently losing connections over activesync and music comes and goes from both lef and right. if the USB connector is shot, then when I plug it in it won't register that there is power, nor will it have the power to light up the red light indicating there is no battery. also, if the usb link is shot, then the phone wasn't charging so my battery is likely dead.
now to test this out I need to have a verified 100% charged battery.
I currently have the same problem. It will not charge via wall/usb. It flashes red once and that's it. Without the battery and plugged in, I get a solid red light. I tried plugging it into the wall charger without a battery and then putting my battery back in. The red light just turns off. That's it. I can get an active sync connection with a dim white screen, but I do not have enough juice to try flashing a new rom. If anyone has issues like these, are you also able to get an activesync connection?
TIA
EDIT: Is it possible to bypass the low battery protection when flashing a rom? My battery is somewhere around 40% so it would be safe.
Update:
Okay, I purchased a new oem battery and a battery charging dock. This way I can charge the battery without the phone before I attempt to flash a new rom.
I still would appreciate it if anyone who has seen these symptoms (white screen BUT with lots of vibrating / no charging / no bootloader) could give me a few pointers. I've exhausted the Wiki and so far it seems my only option to save the phone is to flash a new rom. Thanks in advance to anyone willing to give me some advice.
I ahve a major problem.
Today my battery went down, so I had to charge it.
I left it to charge when I returned the led was red, which means battery is low right? So I noticed it wasnt charging. I retried and was red again.
So I took the battery out and try to to start the phone with the charger attached. But it woudnt start.
The led was green and bliking yellow.
It wont even charge from the pc...................
What do I have to do? What could be wrong?
Thanx in advance
It's possible to turn charging off in the power settings... not sure what to suggest
john09 said:
It's possible to turn charging off in the power settings... not sure what to suggest
Click to expand...
Click to collapse
Itsw working again. Battery seemed dead. I left it charging for one day.
it shouldn't do that, even if you charge it for that long. HP automatically stops charging when full.
Probably the mini usb port is broken. You should have it checked.
Turkiye
So the phone was really low, at 6% this morning. SO I put it on the wall charger. I saw the icon come up that it was charging and then put the phone down.
A while later I went back to the phone and saw that although the charger was plugged in to the wall and also plugged into the phone, it was NOT charging.
Using the phone I went to my contacts to check a phone number and then it turned off, due to no charge.
I plug it into the wall charger, the USB connected to the computer, as well as the car charger and here is what happens:
The top and bottom of the phone blink red for about 1-3 minutes.
Without pressing anything on the phone it automatically turns itself on, I see the Sony Ericsson boot screen, the Windows boot screen then my SPB Mobil Shell screen for about a second and then it turns off again showing and the blinking red light for about 1-3 minutes and then it starts the process all over again.
I think that a setting for Backlight/Power management was changed. As setting similar to "Only charge with usb", or "only charge when connected with ActiveSync" or somthing like that.
The problem is that I turned off the Active sync on the phone in order to conserve battery power so that I could look up the phone number from my contacts. And after I did that the phone shut off and I cannot change it, because it will not charge.
I do not have a different, charged, battery to try and do not think that I can find one easily.
Any suggestions?
Now when I see that the phone is re-booting(I see the SE logo), I use the stylus to to soft reset. It is obvious that there is some type of charge happening before it re-boots, , otherwise it would not re-boot. SO my theory is that by doing a soft rest between restarts, the battery will gain more of a charge each time. And possibly have enough of a charge so that I can go into my settings and see the backlight/ power settings have been changed.
So I took a battery from my old SE 902 phone and rigged it to work with my X2.
It booted up just fine. I was able to get into the menu for power settings. Nothig was changed however I did check the box "do not charge when connected to the computer" backed out of that screen and then went back into the screen and unchecked the box.
I powered down the phone and the screen went to the default charging battery meter.
I then put the proper battery in the phone and it was still blinking red. I saw it blink green for a few seconds, then I felt it vibrate, and then I saw the green battery meter. But after a few seconds it went back to blinking red and I could not see the battery meter again.
This seems to be happening intermittenly. As of right now there is a green blinking light and I see a dimmed battery meter.
Hopefully it will be fine, we shall see.
So it was charging for a while and now has stopped. I see the battery meeter, but there is no green bar moving up. and the light has stopped blinking.
I unplugged the usb and I still see the battery meter with no green bar moving. Installed the back cover and plugged the usb back in.
Now it is back to the red blinking again. . . ? ? ? ? ?
I think that it is a battery issue.
CAn anyone suggest why a battery would all of a sudden stop working?
Just ordered a new battery. $70.00!!! Ouch!!!
It does come with a battery charger for use with a Mini USB, but still, $70.00 is a lot of money!!
I will update with the results after i charge it up.
I got the new battery and put it into the charger. As I mentioned in an earlier post the new battery came with a separate charger for use with a mini usb. At first I had problems. The charger would not charge the new battery. I was using a wall connected mini usb to power the charger. So I went to the computer and tried the mini usb from there. It still would not charge. So I took the battery out of the charger and put it into then phone and went back to the wall charger and it was charging. I could feel the phone vibrate and then saw the battery meter slowly fill with green and back to empty and then fill green again.
So I decided to do a few other chores around the house and went to check the charging status after about 10 minutes. I noticed that the phone was on!! I did not turn the phone on. No one else was in the house to turn it on. It was just on. Weird.
So I took the battery out of the phone and decided to try the new charger again with the computer mini USB. It WAS charging this time!! I charged the new battery on this charger using the computer mini USB until the red light(charging) turned green (finished charging) and then put it in the phone. It works fine.
I then decided to put the defective battery into this charger and it was actually charging!! I left it overnight and it was green this morning: identifying it as a full charge.
When the new battery is down to 10% or less I will take it out and put the defective battery in and see what happens.
So I put the original battery back in after the green light came on identifying a full charge on the accessory charger.
It showed 1% and a message came up identifying that "the battery is low, please charge asap", something like that.
So, in my unprofessional opinion , the original battery is toast.
The new battery worked great after its initial charge using the included accessory charger.
When I decided to charge it using the phone itself with the wall charger I noticed some really weird things happening.
First of all you should know that I downloaded and installed Spoon Charge. Look it up here on the forums, free and works great. It basically tells you what charge level you have, temperature of the battery, what voltage is coming in to charge it and also type of charge the battery is doing: trickle, fast, very fast and on battery.You can set it to read reading at specific time intervals: I have it set to read at every second.
I noticed that the charge kept bouncing between very fast and trickle. At one point it went to on battery, then to trickle then to on battery then to fast.
Ok. Weird. . . I thought to myself.
So I let it continue to charge overnight.
The next day I "tried" to use the phone. it was as slow as it was at it's factory installed settings before I did the memory card fix, accelerator settings, and other fixes that I forgot now have forgotten that I have installed.
At this point I decided to drain the battery as fast as I could by turning on WiFi, Bluetooth, and play a movie at the loudest volume possible. As soon as it reached 10% I took the battery out and charged it with the accessory charger. The next morning I saw that the indicator light was green showing full charge and installed the battery in the phone. It booted up and I immediately received a message that the battery was low, saw 1%.
Knowing that this was a BRAND NEW BATTERY, I turned off the phone and took the battery out and waited a few seconds until I put it back in and rebooted the phone.
This time it said 86% charge!!!!!!
WTF!!!!
So I tried to use the phone and it was as sluggish as before. After about 25 minutes it was starting to be a bit faster but nothing like it was before.
I am really confused now. Since I have a new battery I have ruled out that as a problem. So now is it the phone itself? Could it be the wall charger that is faulty?
Any other suggestions would be greatly appreciated.
Another update.
I put the original battery in the phone and now it works!!!! The old battery that would not charge now charges and works!!!
The phone is not the same. Still really slow, can't get it out of the "LOCKED" position when I want to answer a phone call. Opera is sliggish then fast then sluggish. Not what I had the phone at before all of this started. It actually WAS stable. It WAS useable. Now I want to throw it into the drink!!!!!!
Not sure what to think anymore.
well bro go into the system help of ur mobile press as i say
2ce the end button one time call button, 2ce the end button one time call button,one time end button and u will find the problem it is in the charging port the same issue with me
Hello
My battery sucked, like going from 100 to 20 in 10secs so i asked for a new one from huawei greece. They sent me a new battery and when i put it into the phone and tried to boot it phone didn't boot. I thought it was because the battery was empty and when i connected it to charge first the light was blinking red and then phone boot up to the battery screen. 15min later i realised the phone was boot up and the red light was blinking red and not like staying red which is the light when you charge it with no battery. the percetange was 0%. i left it there for a little bit but nothing happend. then i tried to turn it off while it was connecting to the charger but that just boot up again with the same red blinking light and 0% percentage. I'm on aurora sp on top of aurora v20. When i try the old battery everything is working ok like it charges and everythinh. Could someone help me out?
Strange
Try this connect your phone to usb power without battery inserted. Then turn on when phone boot insert your new battery into your phone let charge until green led or 100%. And install Battery Stats and post details about your batt.
dark_vader said:
Strange
Try this connect your phone to usb power without battery inserted. Then turn on when phone boot insert your new battery into your phone let charge until green led or 100%. And install Battery Stats and post details about your batt.
Click to expand...
Click to collapse
i've tried that nothing changed. i let it boot up without the battery then put it back in without pulling off the charger and it still seemed to be without battery just with the usb cable. i got back to official gingerbread, no rooting and stuff now but still doesn't charge. the weird thing is that the very first time that iconnected it to the charger, when the phone was off, the light started blinking red without phone getting into "battery screen" and after a while it was at battery charging screen. 15min later it was booted up and "no charging" status
Cybergiannis said:
i've tried that nothing changed. i let it boot up without the battery then put it back in without pulling off the charger and it still seemed to be without battery just with the usb cable. i got back to official gingerbread, no rooting and stuff now but still doesn't charge. the weird thing is that the very first time that iconnected it to the charger, when the phone was off, the light started blinking red without phone getting into "battery screen" and after a while it was at battery charging screen. 15min later it was booted up and "no charging" status
Click to expand...
Click to collapse
Okay. Ask Huaei to change your battery since it's damage for another one you have and can active warranty do that