New Battery problem - Huawei Ideos X5 U8800

Hello
My battery sucked, like going from 100 to 20 in 10secs so i asked for a new one from huawei greece. They sent me a new battery and when i put it into the phone and tried to boot it phone didn't boot. I thought it was because the battery was empty and when i connected it to charge first the light was blinking red and then phone boot up to the battery screen. 15min later i realised the phone was boot up and the red light was blinking red and not like staying red which is the light when you charge it with no battery. the percetange was 0%. i left it there for a little bit but nothing happend. then i tried to turn it off while it was connecting to the charger but that just boot up again with the same red blinking light and 0% percentage. I'm on aurora sp on top of aurora v20. When i try the old battery everything is working ok like it charges and everythinh. Could someone help me out?

Strange
Try this connect your phone to usb power without battery inserted. Then turn on when phone boot insert your new battery into your phone let charge until green led or 100%. And install Battery Stats and post details about your batt.

dark_vader said:
Strange
Try this connect your phone to usb power without battery inserted. Then turn on when phone boot insert your new battery into your phone let charge until green led or 100%. And install Battery Stats and post details about your batt.
Click to expand...
Click to collapse
i've tried that nothing changed. i let it boot up without the battery then put it back in without pulling off the charger and it still seemed to be without battery just with the usb cable. i got back to official gingerbread, no rooting and stuff now but still doesn't charge. the weird thing is that the very first time that iconnected it to the charger, when the phone was off, the light started blinking red without phone getting into "battery screen" and after a while it was at battery charging screen. 15min later it was booted up and "no charging" status

Cybergiannis said:
i've tried that nothing changed. i let it boot up without the battery then put it back in without pulling off the charger and it still seemed to be without battery just with the usb cable. i got back to official gingerbread, no rooting and stuff now but still doesn't charge. the weird thing is that the very first time that iconnected it to the charger, when the phone was off, the light started blinking red without phone getting into "battery screen" and after a while it was at battery charging screen. 15min later it was booted up and "no charging" status
Click to expand...
Click to collapse
Okay. Ask Huaei to change your battery since it's damage for another one you have and can active warranty do that

Related

Charging Issue

Has anyone ever had an issue where by their battery life is at say 59% and when i plug it in to charge rather than the blue charging icon appearing it just showing the battery being 100% and the LED doing successive double flashing as opposed to a static LED like i should be if it was charging?
I've not installed anything, flashed a new rom etc, was fine yesterday.
All i did was have a little play with CHTEditor.
somethings not right, it must be something to do with me messing about with CHTEditor
out of the blue my lock screen had gone, and it says i have a voice mail waiting when i dont. haha
Hard reset i think
update...
hard reset not worked...uhoh
Same problem here
I was in a phone call an al of a sudden everything just went black and rebooted. Turns out the phone stopped charging and flasing green and red. Battery ran out of power and the phone shut down. After the reboot the phone charged normally again
Another situation:
Phone started acting up again and endend in a reboot. Battery was empty and i made a phone call on the charger. during the phonecall the same problem happend again, but the battery was at 9%. I intended to unplug the charger and plug it back in, but after the unplug the battery jumped to 0% and shut down.
So, i think the battery is acting up. Having to charge the thing every damn day is finally taking it's toll.
Wizzkid007 said:
Same problem here
I was in a phone call an al of a sudden everything just went black and rebooted. Turns out the phone stopped charging and flasing green and red. Battery ran out of power and the phone shut down. After the reboot the phone charged normally again
Another situation:
Phone started acting up again and endend in a reboot. Battery was empty and i made a phone call on the charger. during the phonecall the same problem happend again, but the battery was at 9%. I intended to unplug the charger and plug it back in, but after the unplug the battery jumped to 0% and shut down.
So, i think the battery is acting up. Having to charge the thing every damn day is finally taking it's toll.
Click to expand...
Click to collapse
The phone seems to charge ok when switched off, i will leave it as it is till im home from work and wil have a tamper with it.
phone is now charging ok, just need to get rid of this voicemail notification now.
hmm and everything back to normal. must be its time of the month
djchubbs said:
Has anyone ever had an issue where by their battery life is at say 59% and when i plug it in to charge rather than the blue charging icon appearing it just showing the battery being 100% and the LED doing successive double flashing as opposed to a static LED like i should be if it was charging?
I've not installed anything, flashed a new rom etc, was fine yesterday.
All i did was have a little play with CHTEditor.
Click to expand...
Click to collapse
tis happens to mine (not allways) hd2 when using non htc battery.
do you have original batt?
bRkiX said:
tis happens to mine (not allways) hd2 when using non htc battery.
do you have original batt?
Click to expand...
Click to collapse
yep, using the original battery, it seems to be ok now, charging as it should.
ahh well. cheers for the reply
one last this, how the hell to i get the lock screen back, i think im being dim.
edit
sorted
I have a program BsB Tweaks that has a setting for the lockscreen. Try that.
My phone is also charging fine when turned off, also it functions fine at the moment. i think it has something to do with overloading the device when the battery is low. Based on that its not possible to turn on any phone when the battery is in attached but the power is, i think everything is drained from the battery while charging it and that when overloading the battery just doesn't pull it anymore.
i don't have a alternative battery, mine is original.
What are the symtoms when the battery is at the end of it's life? does it do this, or is it supposed to give a warning or something?
edit: i am unable to find a manual page describing the different modes the LED could be blinking. I'm curious what is says about the red and green blinking mode. Does such a page exist?

X2 Charging problem

So the phone was really low, at 6% this morning. SO I put it on the wall charger. I saw the icon come up that it was charging and then put the phone down.
A while later I went back to the phone and saw that although the charger was plugged in to the wall and also plugged into the phone, it was NOT charging.
Using the phone I went to my contacts to check a phone number and then it turned off, due to no charge.
I plug it into the wall charger, the USB connected to the computer, as well as the car charger and here is what happens:
The top and bottom of the phone blink red for about 1-3 minutes.
Without pressing anything on the phone it automatically turns itself on, I see the Sony Ericsson boot screen, the Windows boot screen then my SPB Mobil Shell screen for about a second and then it turns off again showing and the blinking red light for about 1-3 minutes and then it starts the process all over again.
I think that a setting for Backlight/Power management was changed. As setting similar to "Only charge with usb", or "only charge when connected with ActiveSync" or somthing like that.
The problem is that I turned off the Active sync on the phone in order to conserve battery power so that I could look up the phone number from my contacts. And after I did that the phone shut off and I cannot change it, because it will not charge.
I do not have a different, charged, battery to try and do not think that I can find one easily.
Any suggestions?
Now when I see that the phone is re-booting(I see the SE logo), I use the stylus to to soft reset. It is obvious that there is some type of charge happening before it re-boots, , otherwise it would not re-boot. SO my theory is that by doing a soft rest between restarts, the battery will gain more of a charge each time. And possibly have enough of a charge so that I can go into my settings and see the backlight/ power settings have been changed.
So I took a battery from my old SE 902 phone and rigged it to work with my X2.
It booted up just fine. I was able to get into the menu for power settings. Nothig was changed however I did check the box "do not charge when connected to the computer" backed out of that screen and then went back into the screen and unchecked the box.
I powered down the phone and the screen went to the default charging battery meter.
I then put the proper battery in the phone and it was still blinking red. I saw it blink green for a few seconds, then I felt it vibrate, and then I saw the green battery meter. But after a few seconds it went back to blinking red and I could not see the battery meter again.
This seems to be happening intermittenly. As of right now there is a green blinking light and I see a dimmed battery meter.
Hopefully it will be fine, we shall see.
So it was charging for a while and now has stopped. I see the battery meeter, but there is no green bar moving up. and the light has stopped blinking.
I unplugged the usb and I still see the battery meter with no green bar moving. Installed the back cover and plugged the usb back in.
Now it is back to the red blinking again. . . ? ? ? ? ?
I think that it is a battery issue.
CAn anyone suggest why a battery would all of a sudden stop working?
Just ordered a new battery. $70.00!!! Ouch!!!
It does come with a battery charger for use with a Mini USB, but still, $70.00 is a lot of money!!
I will update with the results after i charge it up.
I got the new battery and put it into the charger. As I mentioned in an earlier post the new battery came with a separate charger for use with a mini usb. At first I had problems. The charger would not charge the new battery. I was using a wall connected mini usb to power the charger. So I went to the computer and tried the mini usb from there. It still would not charge. So I took the battery out of the charger and put it into then phone and went back to the wall charger and it was charging. I could feel the phone vibrate and then saw the battery meter slowly fill with green and back to empty and then fill green again.
So I decided to do a few other chores around the house and went to check the charging status after about 10 minutes. I noticed that the phone was on!! I did not turn the phone on. No one else was in the house to turn it on. It was just on. Weird.
So I took the battery out of the phone and decided to try the new charger again with the computer mini USB. It WAS charging this time!! I charged the new battery on this charger using the computer mini USB until the red light(charging) turned green (finished charging) and then put it in the phone. It works fine.
I then decided to put the defective battery into this charger and it was actually charging!! I left it overnight and it was green this morning: identifying it as a full charge.
When the new battery is down to 10% or less I will take it out and put the defective battery in and see what happens.
So I put the original battery back in after the green light came on identifying a full charge on the accessory charger.
It showed 1% and a message came up identifying that "the battery is low, please charge asap", something like that.
So, in my unprofessional opinion , the original battery is toast.
The new battery worked great after its initial charge using the included accessory charger.
When I decided to charge it using the phone itself with the wall charger I noticed some really weird things happening.
First of all you should know that I downloaded and installed Spoon Charge. Look it up here on the forums, free and works great. It basically tells you what charge level you have, temperature of the battery, what voltage is coming in to charge it and also type of charge the battery is doing: trickle, fast, very fast and on battery.You can set it to read reading at specific time intervals: I have it set to read at every second.
I noticed that the charge kept bouncing between very fast and trickle. At one point it went to on battery, then to trickle then to on battery then to fast.
Ok. Weird. . . I thought to myself.
So I let it continue to charge overnight.
The next day I "tried" to use the phone. it was as slow as it was at it's factory installed settings before I did the memory card fix, accelerator settings, and other fixes that I forgot now have forgotten that I have installed.
At this point I decided to drain the battery as fast as I could by turning on WiFi, Bluetooth, and play a movie at the loudest volume possible. As soon as it reached 10% I took the battery out and charged it with the accessory charger. The next morning I saw that the indicator light was green showing full charge and installed the battery in the phone. It booted up and I immediately received a message that the battery was low, saw 1%.
Knowing that this was a BRAND NEW BATTERY, I turned off the phone and took the battery out and waited a few seconds until I put it back in and rebooted the phone.
This time it said 86% charge!!!!!!
WTF!!!!
So I tried to use the phone and it was as sluggish as before. After about 25 minutes it was starting to be a bit faster but nothing like it was before.
I am really confused now. Since I have a new battery I have ruled out that as a problem. So now is it the phone itself? Could it be the wall charger that is faulty?
Any other suggestions would be greatly appreciated.
Another update.
I put the original battery in the phone and now it works!!!! The old battery that would not charge now charges and works!!!
The phone is not the same. Still really slow, can't get it out of the "LOCKED" position when I want to answer a phone call. Opera is sliggish then fast then sluggish. Not what I had the phone at before all of this started. It actually WAS stable. It WAS useable. Now I want to throw it into the drink!!!!!!
Not sure what to think anymore.
well bro go into the system help of ur mobile press as i say
2ce the end button one time call button, 2ce the end button one time call button,one time end button and u will find the problem it is in the charging port the same issue with me

[Q] Can't calibrate battery, no matter what

Hey guys, I have a Optimus San Francisco (Portuguese version of the ZTE Blade) and I've been having some serious problems with its battery.
Ever since I rooted it and flashed some custom ROMs, I have never been able to properly calibrate the battery. No matter if I use the Battery Calibration app or Clockwork Mod, the phone will simply NOT charge the battery to 100%. It will stop at 66% or some other random number. In the (very) rare occasions that I did get it up to 100%, the issues remained.
No matter what I try, the problem persists. I bought a new battery from ebay (just arrived, today) and, to eliminate any possible source, flashed a new ROM (I started on SS RLS5, went to CM7.1 Beta, CM7 Stable, and am now on GLS beta 22).
Just like an hour ago or something I flashed GLS beta 22, wiped user and cache partitions and wiped battery stats. I put the new battery in (was about empty), it booted and was at 1%. I connected it to the charger (remember, no batterystats.bin) and it didn't go past 1%. Then, it powered off. Right now it's supposedly charging while powered off, with the red LED.
Any ideas? Seriously, I haven't been able to use this phone on day-to-day basis for MONTHS.
Might be that your hw is faulty. Is the led working? The led should change from red to green when the charge is over 90%.
Here are the battery calibration steps you could still try:
1.Connect the phone to the charger with the phone powered on, and allow the phone to charge until the notification LED is green, indicating the device is fully charged.
2.Disconnect the phone from the charger, and power it off.
3.Reconnect the phone to the charger with the phone powered off, and allow the phone to charge until the notification LED is green.
4.Disconnect the phone from the charger and power it on.
5.Once the phone is powered completely on, power it off again and reconnect it to the charger until the notification LED is green.
6.Disconnect the phone, power it on in clockwork recovery, and wipe batt stats. You need to use this sequence only once.
Yes, while tinkering with this new ROM I tried a "LED test" and the LED did flash red and green.
I've seen those instructions and the problem is, the battery percentage gets stuck at a certain level and will not get past that. So, the LED is always red.
Apparently I solved the problem by using another USB cable and my set top box's USB. Looks like the problem was in ZTE's charger.

[Solved; Ignore] Phone on "charge" at 0% Instantly turns off when charger is removed.

[Solved; Ignore] Phone on "charge" at 0% Instantly turns off when charger is removed.
As the title suggests, my phone will only turn on when the charger is plugged in and the battery stats say "0% Charging (AC) - 0s on battery".
Little background. I just flashed stock and AK 301 kernel as well as the latest libs. Phone turned on just fine, battery was at 50%.
I then decided to run Antutu for the hell of it to see if there were any performance changes etc.
Whilst Antutu was running the phone just powered off and wouldn't power back on. I had a red blinking light and that was it.
Eventually I managed to boot in to recovery after following advice to hold power + vol down for 15 seconds then plug the charger in.
The phone was on charge for about 3 hours with the LED still blinking at me.
When I managed to get in to recovery I flashed the only ROM I had on there after wiping all data etc. Which was Mahdi ROM.
Now when I turned the phone on, after many failed attempts, the battery icon is completely depleted with the charging icon inside the battery and as said in my first sentence it says 0% Charging and as soon as I take the charger out, the phone turns off instantly and won't turn back on nor will it blink until I put the charger back in.
Does anyone know whats going on? Could the battery have come loose somehow? I'd like to open it up but I don't have the required screwdriver to do so, anyone know any other way I can crack the case open without damage?
Any help or suggestions are most welcome. I can't return it on warranty as I bought this phone 1 year ago on the 4th June... Of course this had to happen 6 days after warranty expired!
I think I spoke too soon.
I just decided to hold the power button and vol down until the phone completely switched off. Turned it back on and now my battery says 32%.And as of writing this it's now up to 34%. So it's actually showing that it's charging now, whereas earlier the phone was on for about 20 minutes and said 0% the whole time.
Odd. That's all I have to say.
I can't delete my post for some reason. So I'll just flag it as answered. Sorry about that.

[Q] Nexus 4 bricked? Tried everything.

12.
Not everything my friend
Just charge the battery for some HOURS or over the night. All the described symptoms indicate a low battery to me.
cheers
UPDATE:
Just managed to unlock a bootloader in that short period of time i can get to fastboot. But still no change, phone wont stay in fastboot.
greg17477 said:
Not everything my friend
Just charge the battery for some HOURS or over the night. All the described symptoms indicate a low battery to me.
cheers
Click to expand...
Click to collapse
Well, i actaully tried to leave it plugged over night. But i think it stops charging right after the red light dissapears, which happens after 15mins or so after plugging. Btw, i mentioned earlier that battery shows 3.7V when measured with multimeter, so the battery doesn't seem to be the culprit... or does it...?
12
your battery is drained below safe line....to 0%. They warn you NOT to update it with less than 60% battery FOR A REASON!!
Friends case she managed to charge ger asus 7 memopad with non-removable bat to 60% after 8 HOURS, because of a bloatware wakelock drainage to 0% after a factory reset....
If that doesn't work you have to either recharge the battery manually (something like car batteries, you have to unsolder the battery connector because the battery doesnt have 2 gold squares that touch the gold pins like the removable ones, or get a new battery.
Li-Po batteries should never be discharged to 0%, and can make problems if they are not removable (Nexus 4)
Mashed_Potatoes said:
your battery is drained below safe line....to 0%. They warn you NOT to update it with less than 60% battery FOR A REASON!!
Friends case she managed to charge ger asus 7 memopad with non-removable bat to 60% after 8 HOURS, because of a bloatware wakelock drainage to 0% after a factory reset....
If that doesn't work you have to either recharge the battery manually (something like car batteries, you have to unsolder the battery connector because the battery doesnt have 2 gold squares that touch the gold pins like the removable ones, or get a new battery.
Li-Po batteries should never be discharged to 0%, and can make problems if they are not removable (Nexus 4)
Click to expand...
Click to collapse
I did manage to charge it manually with two small wires and an old Nokia charger, when checking battery with multimeter after a few minutes of charging seems to increase voltage. But i guess if the chip on battery is fried there is nothing more i can do.
I will try to leave the phone on charger all night once again, see if that makes a difference, and update if anything changes.
take off the back, disconnect the battery connector wire and connect it again, put it on charger and see if things change
UPDATE:
Leaving it to charge overnight didn't have any effect. Any other suggestions than changing a battery?
Nah, sorry, but i am out of ideas. You basically tried it all :/
Darkis said:
I know there is a lot of threads about bricked N4's, and i can assure you that I have viewed each and every one of them, but i still can't resolve my broblem.
This whole brick situation happened after trying to update to Android 4.3 OTA update, the phone didn't complete the process and turned off, where red light of death happened.
So the scenario goes like this:
If i hold POWER button for ~30s when phone is off charger i only get a Google logo for 2 sec, and phone instantly restarts
Holding PWR+VOL-DOWN buttons when phone is off charger doesn't do anything
Plugging phone to charge (socket or PC) results in solid red light
Holding PWR+VOL-DOWN or PWR+VOL-DOWN+VOL-UP for ~15s makes the red light blink at a steady rate
While continuing to hold the respective buttons and pluging the charger off, and on again gets me to bootloader or download mode (depending on button combo) for ~2s and phone restarts.
I tried removing and inserting the battery 3 times. One time i got blinking red light when plugged the charger in. Second time i got solid red light and third time got solid red light again
I tried charging the battery directly for 15 minutes with old Nokia charger, and it resulted in something different(when i assembled the phone and tried to turn it on with PWR+VOL-DOWN buttons when charger was plugged off, i got to bootloader for 2seconds before phone restarted, i tried to boot second time and the same thing happened, but when i tried it third time i got nothing, just like before) so this was the first time i got into bootloader while not charging a phone.
*My PC seems to pick up the phone for a brief moment when it is in bootloader and starts installing the drivers. Drivers gets installed when i'm in download mode for that brief moment too.
**Phone doesn't get to the white or red battery icon while plugged to charge.
***Solid red light dissapears after charging for ~10mins, but phone won't do anything.
****When measured with a multimeter battery shows 3.7V
I hope someone will be able to help me with this, as it is frustrating as f*ck. I don't have a working warranty, so fixing the N4 isn't an option, and where i live phone repair prices are over the roof (ex. motherboard change for N4 costs ~270$ ).
Click to expand...
Click to collapse
I had the same problem. Kept it on the charger for a whole day and still only the Red Light.
Took it to a local shop and they said there is a short circuit in the antenna
Took it to the LG Service center and they said my motherboard is gone.
Both were costing a bomb to repair and still there was no guarantee.
IMHO, get a new phone.
Sorry
Have you tried charging it with a wireless charging pad? I got mine to boot after I did that. Your battery is drained and it doesn't have enough juice to charge itself.
12
Don't fall for the motherboard dead trick. Just a way to steal your money.... change the battery and never let it go to 1%
12

Categories

Resources