After having installed and uninstalled vjdevicelock (from vijay555), i noticed that the long keypress on the power button does not completely power off the device as it did before.
It's annoying because i used to extinguish it at night to preserve battery.
I do'nt understand the reason of that (change in the registry ??)
Thank you in advance for any suggestion
My Trinity works with ROM Faman 3.6
I suggest to do a hard reset and reinstall your applications if you keep the cab files in your mini Sd card, that will prehaps clean the registrey if affected
yes of course
Yes of course: i know a hard reset would probably fix the problem. But i do'nt want to loose my actual phone configuration, applications installed and so on
Related
Hi, I'v got O2 XDA Mini S and a "little" problem with it. I'v just installed Phone Profiles [Second Edition] 8.0 and it crashed my phone. After installation (on my memory card), I could not see it on my today screen...so I'v tried to configure it in today screen configuration - but I could not get there - the configuration we're not accessible (it crashed). So after that, soft reset. And the real problem began. After the boot screen and "windows mobile welcome screen" the mobile just freezes. Active sync on my PC connects to it just for a second, then disconnects. The Phone Profiles [Second Edition] 8.0 is installed on my memory card, so I'v removed the memory card - the same problem. It was annoying - so hard reset....does not help. I have Wisbar Advance 2 as well, which is starting first and I can see only the welcome screen of it (sometimes it loads and I can see the whole skin). Sometimes (after reboot) I can see the menu, today screen etc. but the phone freezes. I think that the Phone Profiles [Second Edition] 8.0 is freezing the phone after his process starts. Is there anything like "safe mode" start or something like that, which could help me to remove this soft ? Or any other way to normally start the phone ? Any ideas ? Many thanks for help.
It should start after hard reset - phone profiles, wisbar advance will not load after a proper hard reset - the phone will be back to factory condition.
Did you do proper hard reset? After that it sounds like phone profiles should be installed to device memory not storage card. Most today plugins only work properly on device memory.
I'v done the hard reset (I think it was done properly - comm manager and voice command button pressed in the same time and then reset button). But after I'v pressed these buttons, nothing specially happend....the phone was still off. So I'v turned it on....and there were no changes with the software - still the same. Maybe I'm doing the hard reset wrong ?
leez said:
I'v done the hard reset (I think it was done properly - comm manager and voice command button pressed in the same time and then reset button). But after I'v pressed these buttons, nothing specially happend....the phone was still off. So I'v turned it on....and there were no changes with the software - still the same. Maybe I'm doing the hard reset wrong ?
Click to expand...
Click to collapse
Yep sounds like hard reset is not done. Press these 2 buttons but keep them pressed and dont let go - then press reset with the tip of the stylus and then text should come on the screen with black background. Press green (call) button and hard reset will commence.
Or you can first turn device off - then press the 2 buttons and keep them held and press power on to reach the same screen.
Ok, I'v done it. Many, many thanks for help. The phone manual is wrong (!). . Anyway Phone Profiles [Second Edition] 8.0....WTF is that ? This program just crashed my phone and I need to reinstall all the soft. Wrrr. And I just wanted a profile manager . Thanks again for help ! :mrgreen:
Good, I am glad - try the one I use - its free http://www.winmobileapps.com/device/pocketpc/plt/plt_download.aspx
Nice one, got it. Thanks.
It may be a newbie question, but I have tried to find it out for a couple of weeks now and failed:
How do I turn the Universal off, apart from taking the battery out? Does Windows Mobile have a menu option that turns the deice off? I can't find the key combination that does it either.
What is the safest way to reset it? If I use the reset button, some recent text messages get lost.
I am using Helmi UNI AKU3.5 ROM. Might it be the rom's fault?
Hi there,
In fact, most PDAs are never "off" because else it wont turn "on" to do the reminders...
That said, few 3rd party tools allows you shutdown your device or restart it.
Like http://ppcsoft.narod.ru/english/
Or GsPocketMagic++
I think VJEschaton can put it into a "deeper" deep sleep. I can't remember if this works on the Universal, it should work on all HTC Xscale devices, but I think it was only tested on the Magician.
The device can be forced into any power state you want. But the OS doesn't support that, so it's OEM specific typically.
V
I had that prob with losing messages..
How you can fix it, is if before you reset you press the power button one (to make it sleep) then press it again (to wake back up) then do the reset.
It will keep that exact state its at then.
I think this is what you mean?
Hello Everyone,
I have a Cingular 8125 with the original 2.25ROM. Every once in a while (about once a day), when I try to press the power button to return my phone from standby, the screen will not light. The green LED light showing that the phone is powered on still keeps blinking, but the screen will not turn on, and I have to soft reset my phone with the reset button on the side, or remove the battery in orer to get my phone back working.
I have done a hard reset and this problem has not changed. Does anyone have this problem, or seen a fix for it? I am thinking it might be a problem with some of the reg tweaks I have done, or with a program.
The problem programs I am thinking may be contributing to this are Wisbar Advance due to memory leaks, or PPCProfilesPRO. The only real reg tweaks I have done are Molski's Customizing tweaks and the A2DP hack. Could it be a hardware issue? Any help would be much appriciated.
Thanks.
Sorry I cannot help more, but I remember Wisbar Advance doing that to my h6315 WM2003 based device. Then again, it would sometimes do it on it's own too (but very rarely w/o W.A). I hacked it to make A2DP work, and it did not cause such problems on it... but again, totally different device, but similar CPU.
I installed some software, a voice activation software, and now it crashes everytime i try to navigate to settings to remove the software. I have to reset it from the back everytime.
How can I sort this out
Sounds like time for a hard reset?
Sfkn2 said:
Sounds like time for a hard reset?
Click to expand...
Click to collapse
+1
I'm fairly certain you are going to have to hard reset too. Sorry
i just suffered the same fate thanks to my MT4.
btw , if you have sktools, you can try the remove program from there too
How do I do a hard reset? Wasn't that only done through the settings option on the phone?
Hard reset means you return the Xperia to "out of the box" state ...you loose all data and programs
1. turn off the phone
2. Hold both right and left buttons (the hardware buttons that stick out a bit, right under the screen)
3. press power button, while still holding the others
4. follow on screen instructions (to press "R" to confirm reset, slide out and use the hardware keyboard)
thread
I had exactly the same problem this week.
I had bought the program and installed it successfully. However after installing it again after a hard reset, it did exactly as you describe, crashing when you try to access settings.
I think the version I had purchased was MSVoiceCommand_1.6.17913.CAB. There is a version getting around these forums (MSVC_US_PPC_1.6.19209.bengalih.CAB) which did the trick for me.
Hope this helps
CapsLock1 said:
I had exactly the same problem this week.
I had bought the program and installed it successfully. However after installing it again after a hard reset, it did exactly as you describe, crashing when you try to access settings.
I think the version I had purchased was MSVoiceCommand_1.6.17913.CAB. There is a version getting around these forums (MSVC_US_PPC_1.6.19209.bengalih.CAB) which did the trick for me.
Hope this helps
Click to expand...
Click to collapse
I'm scared installing any other voice command now, I've reset the phone too many times.
IS this software even that good?
I had the same problem too
In lieu of installing a 3rd party software (eg sktools, memmaid, etc) you could try uninstalling it via active sync. Or maybe remove it from the startup programs then soft reset.
(Sorry for my bad english) Hello, i have a big problem with my Ioite, problem starts a 3 days ago.When i press top button for turn off display, phone automaticly shutdown,but these shutdowns hasn't schedule. Sometimes it doesn't shutdown for a 5 hours, but sometimes it shutdown 5min after power on. I solve this problem that way so i must open case and take out battery. But this is not solution I don't want make hard reset my phone. Problem start when i installed some apps - like SRS WOW (for better volume) and SPB Traveler, I remove SPB Traveler, but phone still shutdown randomly and automaticlly. Please help me with this problem. Thank you for your respondings. PiiiRKO
If you remember the programs that you installed before the problem begins, maybe(if it isn't a hardware problem) you can solve it. Probably one of them put some values or keys in registry that don't erased when you uninstall the program. So you can open the cab of these programs with a cab manager on pc(e.g wince cab manager) and see what registry entries they have. After with a registry editor delete or change these values and see if your problem solved. Hope this helps you to find a fix.
Unfortunetly...
Unfortunetly this solution doesn't help so i must make hard reset. Hope this solve my problem. But thank you very much for your help
PiiiRKO said:
Unfortunetly this solution doesn't help so i must make hard reset. Hope this solve my problem. But thank you very much for your help
Click to expand...
Click to collapse
When the phone is closed or blocked and no longer respond to any command, the only method of booting is to reset it? I also had a similar problem ... random phone stall and not respond to any command, the only method of starting the reset or battery removal
Same issue I found it today on my HTC touch cruise 09. But on my device I haven't installed any new apps in the last month. Any other ideas? What could be wrong in this case? I have to mention that the device is working with original software, no changes done in this way. Any help would be great. Thanks.
I had the same problem a time ago, but with another device (HP) and also, it began when i installed the SPB Traveler ... I uninstalled it but the problem didnt disappear ... I had to make a hard reset ...
Now, I have install it again in my Iolite (I think that it is no a problem of this application) and all works fine ... i hope all follow equal forever ...
Regards!!!