Database Users

Upgrade to Wm 2003

Hello All
Does anyone know this error, which I get during the upgrade to WM 2003, and how to circumvent this:
The ROM image that you are trying to upgrade is not compatible with your pocket PC.. Please compare the device and upgrade information below.
Your current information:
Model: PW10A1
ROM version: 3.16
Language: Englisj
Your upgraded image information:
Model PW10B1
ROM version 4.00
Language: English
Please download the compatible utility and try again.
Any ideas?? I downloaded the image (TMO2003.exe) from here
I hope someone has some ideas..
Thank you in advance
Best regards
Lars

Use adaptROM
Just go to
http://www.xda-developers.com/adaptROM/
There you will find, what you need.
:wink:
Kaputter

Lars1106 said:
Hello All
Does anyone know this error, which I get during the upgrade to WM 2003, and how to circumvent this:
The ROM image that you are trying to upgrade is not compatible with your pocket PC.. Please compare the device and upgrade information below.
Your current information:
Model: PW10A1
ROM version: 3.16
Language: Englisj
Your upgraded image information:
Model PW10B1
ROM version 4.00
Language: English
Please download the compatible utility and try again.
Any ideas?? I downloaded the image (TMO2003.exe) from here
I hope someone has some ideas..
Thank you in advance
Best regards
Lars
Click to expand...
Click to collapse
Extract the Zip file to a folder, and click start Not the setup icon.
Please be careful playing rom upgrade.
Always Backup your original rom.
Good luck. :wink:

Everything works but the PHONE
Well.. did the upgrade to wm2003... everything but the phone works..
I am using Orange in Denmark.. it simply now says "NO SERVICE" when tapping the Icon in "Today" screen
Have anyone here got a clue about what to do now, the phone is the most important part for me!!
Wbr
lars

Re: Everything works but the PHONE
Lars1106 said:
Well.. did the upgrade to wm2003... everything but the phone works..
I am using Orange in Denmark.. it simply now says "NO SERVICE" when tapping the Icon in "Today" screen
Have anyone here got a clue about what to do now, the phone is the most important part for me!!
Wbr
lars
Click to expand...
Click to collapse
What version of WM2003 you are using?
Did you setup your network band setting? click phone/tool/option/band 900/1900.

See my post on this: you might have to change back the band with Bootloader/Calendar button: if you change something under the Tab Band in Phone settings, you can not use your phone anymore (in Europe). Don't ask me why, I had the same problem. If I don't touch the Phone Setting menu, everything works.

Hello..
I am using version 4.2.1081 (build 13100) and I did choose the 900 network for Europe... but still no work
And the worst of all.. Unfortunately no backup.

Did you choose the 900-band with the bootloader/calendar option or through the phone/settings menu? i could only change it with the bootloader, I have the same version as you have.

Hi Rick
Right now, looking through forum, to find out what the bootloader method is.. Can you enlighten me??
Thanks in advance

The same my XDA 3 weeks ago
http://xda-developers.com/forum/viewtopic.php?t=1687&start=100
Note: have to HOLD the JOYSTICK for confirmation of the selected band then soft reset

Re: Everything works but the PHONE
Hi OCMAX,
Do you know the way to set the Maxis GPRS in WM2003.
I had tried two ways but it doesn't work at all after the upgrading:
First setting
-------------
1. Modem : Cellular Line
2. Number : +0~GPRS!net
Second setting
----------------
1. Modem : Cellular Line (GPRS)
2. Access point name: net
The username and password for both setting are maxis and wap.
Would you please share your experience ? Thanks !
Regards,
Vince
OCMAX said:
Lars1106 said:
Well.. did the upgrade to wm2003... everything but the phone works..
I am using Orange in Denmark.. it simply now says "NO SERVICE" when tapping the Icon in "Today" screen
Have anyone here got a clue about what to do now, the phone is the most important part for me!!
Wbr
lars
Click to expand...
Click to collapse
What version of WM2003 you are using?
Did you setup your network band setting? click phone/tool/option/band 900/1900.
Click to expand...
Click to collapse

WM 2003 no service after bootloader
Hi
I am affraid that this didn´t work.. I did this.
1. Through the bootloader I choose GSM 900 using the joystick
2. Did a softreset to quit the bootloader.
3. Still no GSM service
Any more ideas I can try??
Thanks in advance
Lars

@Lars
Try again GMS 900/1800 (900 BAND- no working in my XDA) :wink:
Good luck!

Hi..
No I am affraid this didn´t help..
I read somewhere that you had to hold down the joystick whilst doing the reboot, is this so...
Wbr
Lars

@Lars
View: http://xda-developers.com/phpBB/viewtopic.php?t=2168
I had the same problem and I switched back to the old radio version and now it works...
I think the radio upgrade does not work in Europe. Since in the US they have 900/1900 band and in the EU 900/1800. I'm a little bit confused because also the 900 carriers (here in Germany two: TMO and vodafone (D2) are not detected. Why?
Chris

Re: Everything works but the PHONE
yeyang said:
Hi OCMAX,
Do you know the way to set the Maxis GPRS in WM2003.
I had tried two ways but it doesn't work at all after the upgrading:
First setting
-------------
1. Modem : Cellular Line
2. Number : +0~GPRS!net
Second setting
----------------
1. Modem : Cellular Line (GPRS)
2. Access point name: net
The username and password for both setting are maxis and wap.
Would you please share your experience ? Thanks !
Regards,
Vince
Click to expand...
Click to collapse
Actually I'm not using any GPRS service at the moment because I felt it doesn't worth it. ( Screen too small to browse around ).
Hope this setting can help you.
Service: Maxis GPRS (Up to u to add diff. name)
User name: maxis
Password: wap
Connection: (NEED to check with your service provider)
Phone: *99***1#
Connection type: PPP
Idle timeout: Never
Query DNS: unticked
Primary DNS: 202.75.129.101
Secondary DNS: 202.75.129.102
IP address: Automatic
Login Script:
Send:ATZ
Send CR:
Send:at+cgdcont=1,"ip","net"
Send CR:
End
found this in other forum.
Good luck. :wink:

Lars1106 said:
Hi..
No I am affraid this didn´t help..
I read somewhere that you had to hold down the joystick whilst doing the reboot, is this so...
Wbr
Lars
Click to expand...
Click to collapse
Went you in the bootloader band selection. scroll down to the setting using your joystick and push the action button (center of the joystick).
1) select the network 900/1800 or 900/1900 and push action button
2) select to ON the GSM and push action button
It will prompt you when done. :wink:

You need to go to the O2 site and down load the European radio stack 4.21. You can't use a US radio stack on a European XDA and vice versa. The O2 4.21 stack will install from an .exe so it is easy to do and it workd with the WME 2003 4.00.10.

Do you know their site.. have searched on Google wo result !!
Cheers,
Lars

Extract the Zip file to a folder, and click start Not the setup icon.
Please be careful playing rom upgrade.
Always Backup your original rom.
Click to expand...
Click to collapse
I tried unzipping it to a folder. All i get is an upgrade application file and a folder called "english" which has the NBK.nbf upgrade ROM image. No Start nor the Setup icon.
Hello All
Does anyone know this error, which I get during the upgrade to WM 2003, and how to circumvent this:
The ROM image that you are trying to upgrade is not compatible with your pocket PC.. Please compare the device and upgrade information below.
Your current information:
Model: PW10A1
ROM version: 3.16
Language: Englisj
Your upgraded image information:
Model PW10B1
ROM version 4.00
Language: English
Please download the compatible utility and try again.
Any ideas?? I downloaded the image (TMO2003.exe) from here
I hope someone has some ideas..
Thank you in advance
Best regards
Lars
Click to expand...
Click to collapse
I am getting the same problem. I tried running adaptROM.exe file. But it opens a CMD dialog box and then closes. I try running the upgrade, and i still get the same error. Am i doing something worng???
Suggestions... please!!!
-Thanks

Pencil Box hangs - any idea?

Hi All,
I have Wizard running on
ROm - 1.3.2.2 - ENU
ROm date - 9/29/05
Radio - 01.01.10
Protocal - 4.0.13.17
Ext ROm - 1.3.2.102
Moidel no - WIZA200
When I install pencil box and try to run it after a restart it hangs!
1. Does anyone run pencil on thr Wizard, if yes which version?
2. What could be wrong that the pencil box hangs in my wizard?
Any kind of help highly appreciated.
Thank you
Peace
Deepaknl

same here, i loved pencil box on the blueangel to doodle when i was bored but on the wizard just hangs, i am waiting for a newer version to be developed that will fix this.

HTC TYTN defective?

First: Apologies for my bad english speech, my native language is Dutch.
My TYTN is having the flu or something.
I have an alternative firmware but I am positive this is not the problem (I hope HTC does not see this als a violation for not giving any guarantees).
ROM version: Schap's 4.01
ROM date: 10/03/07
Radio: 1.47.00.10
Protocol: 32.80.7020.20H
ExtROM: 4.01.20071111
--
The display misses half of it's brightness and is flashing like an very old 50hz TV (you can see it very good when you don't look directly into the display, so especially annoying when using the phone as a GPS navigator).
When the background is white, there appears some white to light gray gradients of about 3mm in height, horizontal bars but very light.
Even in the BIOS screen (OK+POWER+RESET) gives the same bars visible
The colors in de display are extremely reduced, it looks like an old 256 color display.
--
The rest works good. I can make telephone calls, the ringer and vibration are OK. Camera works.
Can anyone please tell me if this is a known problem? My dealer expects me to return the phone today.
The firmware on my phone is installed about 1,5 week ago and worked flawlessly.
Please help

I think the display is defective HTC should repair it. But only if you have an original rom on your device. you should reflash the original wm6 from htc. Otherwise your warranty will be void.

sdemon said:
I think the display is defective HTC should repair it. But only if you have an original rom on your device. you should reflash the original wm6 from htc. Otherwise your warranty will be void.
Click to expand...
Click to collapse
PLEASE tell me how? I know how to flash but how to obtain an original firmware, and how to reload te original bootloader?
Many, many thanks!
--
Update: Just registeren by HTC and now downloading the firmware.
I'll keep you up te date.

Well "upgrade" is succesful.
BIOS shows
HERM200
IPL-1.04
HERM200
SPL-2.10.Olipro
---
ROM version: 3.54.255.3
ROM date: 07/05/07
Radio Version: 1.48.00.10
Protocol version: 32.81.7020.20H
ExtROM version: 3.54.255.104
----
Is this OK ????
If this is OK I can send ik back to HTC for service.
I only have doubt about the Olipro version, is dit original HTC?

Olipro is not htc standard.
Maybe it is possible to downgrade but I am not sure about this. What I have read is that once you flash official ROM SPL should be back to standard. But since yours is not I am not sure how to achieve this.

sdemon said:
Olipro is not htc standard.
Maybe it is possible to downgrade but I am not sure about this. What I have read is that once you flash official ROM SPL should be back to standard. But since yours is not I am not sure how to achieve this.
Click to expand...
Click to collapse
Well I already sent it in. I hope they don't see it as a problem (it is not a software defect so...).
If they do make this a problem they are cutting in their own fingers because my manager gave us these phones to see if it is usable in the organisation. If the service is not 100% good they probably check for other brands.

Flashing radio fears

Hi people,
just got my grubby pawls on a touch hd with radio problems,
I've search forums on how to fix but i'm a little scared to do it
to begin the person i bought the HD from had paid some company online for an unlock code or something.... (originally orange)
I've put my sim card in (virgin) and get 2 bars signal but canot make or revieve calls
now i've searched and found this
Credit to duttythroy-
FAQ: How to do a Rom/Radio Upgrade with SD Card..
Solution:
1.Copy BLACIMG.NBH into the root dir of your Storage Card.
2. Be sure to have at least 30% of charge.
3. Turn off your device by using the Power Button
4. Go to bootloader mode. Push and hold Vol Down + press Power button.
5. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
6. The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.
1.09.25.14 / 52.49a.25.26W
Download 1.09.25.14 / 52.49a.25.26W Radio only Megepload
Click to expand...
Click to collapse
my question is: is it that simple? nothing i need to check first regarding rom etc?
thanks in advance

Yup... flashing the radio really is that easy. Just make sure you pick one that's compatible with your OS.

ahh i kinda thought there would be something.
I'll go looking
any clues what to look for lol
PS many thanks for the reply

ok lots of reading and i think i've gotten somewhere
could someone confirm before i flash please?
# Country - GB
# Model - HTC_Touch_HD_T8282
# Operator - Orange
# CID - ?
# Sim - Supposedly unlocked ???
# Operator Version - 34.119.1.611
# Rom: 1.19.61.1 WWE, Rom Date (11/25/08), Radio: 1.09.25.14, Protocol: 52.49a.25.26U
# CE Version - OS 5.2.20764 (build 20764.1.4.3
(just realised i could have pasted all that from your wiki page lol)
Sooo my radio is: 1.09.25.14 meaning i have a choice of:
1.09.25.14 / 52.49a.25.26W
Download 1.09.25.14 / 52.49a.25.26W Radio only Megepload
Download HD_Blackstone_Radio 1.09.25.14 (with RUU) 4shared
what i dont understand is they are the same radio versions?

whapper said:
ok lots of reading and i think i've gotten somewhere
could someone confirm before i flash please?
# Country - GB
# Model - HTC_Touch_HD_T8282
# Operator - Orange
# CID - ?
# Sim - Supposedly unlocked ???
# Operator Version - 34.119.1.611
# Rom: 1.19.61.1 WWE, Rom Date (11/25/08), Radio: 1.09.25.14, Protocol: 52.49a.25.26U
# CE Version - OS 5.2.20764 (build 20764.1.4.3
(just realised i could have pasted all that from your wiki page lol)
Sooo my radio is: 1.09.25.14 meaning i have a choice of:
1.09.25.14 / 52.49a.25.26W
Download 1.09.25.14 / 52.49a.25.26W Radio only Megepload
Download HD_Blackstone_Radio 1.09.25.14 (with RUU) 4shared
what i dont understand is they are the same radio versions?
Click to expand...
Click to collapse
So you want to flash radio 1.09.25.14? to 1.09.25.14? That's the same radio.
If this is your first time flashing, please make sure you have Hard SPL (protects your device from being destroyed).
The process is explained <<HERE>>

band27
thankyou for the reply,
really i have no idea what to try....
any suggestions?

Just check out peoples signatures. You'll soon find a good combo.

whapper said:
band27
thankyou for the reply,
really i have no idea what to try....
any suggestions?
Click to expand...
Click to collapse
My suggestion is to try most of them. Don't make decisions based on others as it's not a popularity contest but more about where u are in your own location. Sometimes it's as specific as the GSM towers and where they are located in respect to your neighborhood.
....and the latest radio is not always the best. I've gone through all the radio's and I'm using a radio from approx a year ago.
Test based on the following:
• battery consumption
• reception (GSM, GPS, BLuetooth, etc.)
• how hot it runs when using the device....etc.

thanks for the reply
I was thinking last night, could it have been a dodgy sim unlock thats the problem? ie making it look as if its unlocked but not actually unlocked?
I presume rom flashing wont sim unlock either?

whapper said:
thanks for the reply
I was thinking last night, could it have been a dodgy sim unlock thats the problem? ie making it look as if its unlocked but not actually unlocked?
I presume rom flashing wont sim unlock either?
Click to expand...
Click to collapse
You've presumed correctly, flashing a rom will not sim unlock your device...

whapper said:
I was thinking last night, could it have been a dodgy sim unlock thats the problem? ie making it look as if its unlocked but not actually unlocked?
Click to expand...
Click to collapse
If unlock went haywire, you wouldn't be able to use SIM from another provider... or any at all.
So it's radio version (most probably) not quite appropriate for your area.
I used GB (Orange, if I'm not mistaken) ROM (1.59.61.2) and I also had some weak signal issues.
I have tried 1.17.25.09 radio, but it has also some issues, including a bit greater battery drain. On the other hand, that radio has fastest satelite lock of all radios I tried.
So go on, try which radio is best suited for your area... Or maybe first try that Orange ROM I used... link is on Wiki...

[Q] HELP My tast dont work :S

First of all many thing I don't get it If this thread is shown up here and I don't see it than don't make joke at me...
I don't know very well English but I love WM Anyway ... I bought a i-Mate JasJam HERM100
ROM version : 3.54.255.3
ROM date : 07/05/07
Radio version : 1.48.00.10
Protocol version : 32.81.7020.20H
ExtROM version : 3.54.255.104
All work perfect but my keys are sometimes block's they shine the Light when I Push them but they don't Open the Programs
When I restart the Phone only once they work then not
(End Call,Apply Call,Ok Call,Internet,Message,Start and the right and left)
And sometimes when I push down or Up button it opens Internet Explorer
the others buttons Work Perfect
Can Anyone help or do I have to change Rom ...and PLS don't make jokes If I wrote something wrong