Bought an XDA II last week here in Dubai.. after being the rest of the week in the UK and finding more dropped calls and "UNABLE TO ACCEPT CALL" :evil: issues than I have ever had with my Qtek...plus all the "FREEZES" :evil: than even on the original qtek at launch...I would suggest having a good look at this thing before going ahead and buying it !!! This is not a flame message, I will try to talk with CarrierDevices (They are in the Next building to ours in Dubai...). Only thing I can think off as possible issue is that this is an Arabic version ! but I am using it in English !!!, and apart from the ISSUES I think the phone is cool and the screen is super good (better than my company provided ipaq 2xxxx.
Hey NoBackUp, what is the ROM and Radio version?
Just for reference, the numbers for our XDA II:
Boot screen said:
R 1.05.12
G 1337.12
D 1.03.00 USA
Click to expand...
Click to collapse
Device information said:
ROM version: 1.03.00 USA
ROM date: 09/24/03
Radio Version: 1.05.12
Protocol version: 1337.12
Click to expand...
Click to collapse
About said:
Microsoft PocketPC
Version 4.20.1081 (Build 13100)
Click to expand...
Click to collapse
I have the same Rom that you specified,but it has the arabizer that can be disabled, but i am having problems with the photo contacts program that is not working properly (it won't preview and doesn't work), do you know when will there be a more stable ROM or if u have access to one.
Other that that it ROCKS!!
Thx
Maharbert said:
I have the same Rom that you specified,but it has the arabizer that can be disabled, but i am having problems with the photo contacts program that is not working properly [...]
Click to expand...
Click to collapse
I would say all the arabic-specific stuff is in Extended_ROM. See our page metioned previously on how to access this.
the versions you quoted are the same as the ones from Dubai...
I have tried the Arabizer both ON and OFF, still I get the unstable reactions....pity...nice piece of kit really.... carrier devioces are back at work tommorow lets see what they have to say for them selfs...
Well regarding the unstable part i have 2 XDA II one unbranded and the other is i-mate to be honest the i-mate is working great just like the unbranded device when i removed the pre installed arabizing software.
so i think there is ure problem which by the way also used to happen on the normal XDA...
i have also managed to work the bluetooth on it itssssss charming.
SIM?
I think if you have a SIM card with a round metalic contacts, rather than the square(er) contacts of newer 3v only SIM cards there are some stability issues.
I've a square 3v SIM and no stability issues to speek of.
we only have phase 3 sim cards here...”3v only” is the old style…
try the following hit the "Wireless" icon and note how long it takes for the dialogue box to pop up then hit the "Turn the radio off" hotspot.. You will notice much longer delays before it performs the task, the same happens when you have switched it off and then attempt to "Switch the radio on". A further prob is with the Volume control....do the following...call your voicemail "long" press the green phone key, now when the speakerphone is on , reduce the volume with the side "Slider" when it is at minimum try to increase it...it don’t work you can only use the stylus on the screen, if you allow, after reducing the volume, the dialog to disappear then try to increase the volume with the slider it works again, then if with the dialogue displayed you then end the call the dialogue will appear to be stuck on screen, and only disappear after about 10 secs...I have tried the above with Arabizer on and off, I have even "Cold" booted and said cancel when the "customize" dialogue pops up....
what is the problem ?
i have last rom 24062006
thanks
biker200 said:
what is the problem ?
i have last rom 24062006
thanks
Click to expand...
Click to collapse
What kind of reset: HARD or SOFT?
soft reset
right now i only see the screen that say 02 logo, i try to flash the rom again but it didnt help.
biker200 said:
soft reset
right now i only see the screen that say 02 logo, i try to flash the rom again but it didnt help.
Click to expand...
Click to collapse
If your device after reflashing of official version of ROM isn't starting up - something wrong with RAM or ROM(hardware) IMHO. Visit the Service Centre.
I had similar problems with my Atom. IT seems that there are some hardware issues that prevent Atom from starting in certain conditions. In my case, Atom freezes when I soft-reset using stylus and SR button. It defreezes if I take out battery and put it back, but in this case Atom looses time settings. In case I do softreset with program (like O2 plus) Atom restarts Ok and no problems at all.
nomad_irk said:
If your device after reflashing of official version of ROM isn't starting up - something wrong with RAM or ROM(hardware) IMHO. Visit the Service Centre.
Click to expand...
Click to collapse
is that something i can do if i leave in israel ? where should i send it for repair ? and also dos it worth the money ? to fix it ?
thanks.
biker200 said:
is that something i can do if i leave in israel ? where should i send it for repair ? and also dos it worth the money ? to fix it ?
thanks.
Click to expand...
Click to collapse
http://www.seeo2.com/support/template/RepairCenter.vm/_country/au
Choose the nearest one, contact with it and send.
If the warranty isn't over, you'll pay for the logistic(transporting) only.
Hi Dear Friends,
I bought one SPV-M600 (same as HTC Prophet) and there was a problem with the sound in ear speaker and microfon. Then I made many updates do different vesions and I found tt this problem disapper. Now I can speak, but I cant hang-up the line and to press the btn in upper right corner, associated to contacts. The most strange is, when I start the camera and then I exit fm camera menu, those two buttons working perfectiy for a some time. I'm sure that this is a software problem. I tried
[wm6.1]Prophet ShadoW 2.0 Touch Edition
[wm6.1]Prophet S4V.19701.01 (UC)
PV_Temp + Prophet tuch XB
...
But same and the same... When I restart the phone I can't use contacts btn and red headphone for hand-up and exit. After some circumstances (like camera on, than off) these two btns start working for some time.
P.S. All times all used soft for G4 phone.
IPL 2.20.0001
SPL 2.G4.4pda
GSM 02.19.21
OS 10.0.0.0
_________________-
DEVICE INFO
ROM: 10.0.0.0 WWE
09/26/07
Radio 2.19.21
Protocol 4.1.13.09
Ext Rom ver Prophet Touch X
Model No. PM300
PLEASE HELP ME TO SOLVE MY PROBLEM.
THOUSEND THANKS IN ADVANCE.
this reminds me of my problem with the power button and it might not neccessarily be a software problem if it's the same on all ROMs.. i didn't get you - you said it was the same with the original rom, too?
Never seen original rom
Hi Vooood,
tks for your reply.
Please note I never seen the original rom fm Orange UK.
Could someone tell me from where I can download it.
Best Regards
hmm no idea if you can download it.. perhaps if orange released upgrades or something like that.. but you can request some original roms and people will most of the time reply with one
your last hope is servicing where they can put on the original rom and even check out your buttons if you don't mind paying for that..
gera4ko said:
Hi Vooood,
tks for your reply.
Please note I never seen the original rom fm Orange UK.
Could someone tell me from where I can download it.
Best Regards
Click to expand...
Click to collapse
Look at the wiki!
hi guys, i just flashed a energy rom on my new pure, now the IMEI is changed a little. its the same IMEI with addition of 01 at the end and the model number is changed as well.
thanks in advance
zdane said:
hi guys, i just flashed a energy rom on my new pure, now the IMEI is changed a little. its the same IMEI with addition of 01 at the end and the model number is changed as well. can at&t tell if its the same phone?
thanks in advance
Click to expand...
Click to collapse
I got the same problem!
5 last digits changed in my IMEI and extra "01" added!
Positive thing here is that it seems it's possible to change IMEI back.
Can anybody assist us?
Why does it matter. I use AT&T, and they can only know things about your phone if you TELL THEM. Besides, I don't think it actually changed the actual IMEI.... That's a little hard to do..
BTW.....If you let them know you use a diamond 2 then you will be paying an extra $30USD a month for data.
imei not actually changed
orik13 said:
I got the same problem!
5 last digits changed in my IMEI and extra "01" added!
Positive thing here is that it seems it's possible to change IMEI back.
Can anybody assist us?
Click to expand...
Click to collapse
it didnt change your imei it just added the 2 digits at the end they dont matter any at all (it was always your imei the old rom only reports the 15 digits as thats all anyone uses) once you change it back to the stock rom it will be gone again
cnpthe3rd said:
it didnt change your imei it just added the 2 digits at the end they dont matter any at all (it was always your imei the old rom only reports the 15 digits as thats all anyone uses) once you change it back to the stock rom it will be gone again
Click to expand...
Click to collapse
Thats not completly true, I've flashed both EnergyROM and Dutty's and running stock right now. I also have 01 at the end.
Perhaps its a HSPL issue?
Would be better for me if i could change my imei completely so i don't have to pay extra $30 for stupid pda plan. i'm using pure, they will always know even if i don't tell them.
i wish we could change the IMEI not to pay for the 30$ internet
my imei is changed too
att blows
att doesnt know unless u tell them. hell, i bought a phone from them online and they didnt even know i had a pocket pc.
Hello,
I have bought the gv08s, and i am very happy with it.
Nice and good design, nice screen and good battery.
But only bad thing is bluetooth connection.
It is very weak and lose connection when i am like, 3 meters away from phone
Is there any solution for it, like going in secret menu or flashing a new rom on it?
Thanks
carlospaco said:
Hello,
I have bought the gv08s, and i am very happy with it.
Nice and good design, nice screen and good battery.
But only bad thing is bluetooth connection.
It is very weak and lose connection when i am like, 3 meters away from phone
Is there any solution for it, like going in secret menu or flashing a new rom on it?
Thanks
Click to expand...
Click to collapse
It could be yur phone here, check the distance connecting your phone by Bluetooth to the computer, you'll see if the distance is the right one, or check with another phone, just then you can judge
There is no settings or firmware for powering BT, *#3646633# or *#993646633# - in engineer menu you can change protocols, but this will not help you at all
Golem_ said:
It could be yur phone here, check the distance connecting your phone by Bluetooth to the computer, you'll see if the distance is the right one, or check with another phone, just then you can judge
There is no settings or firmware for powering BT, *#3646633# or *#993646633# - in engineer menu you can change protocols, but this will not help you at all
Click to expand...
Click to collapse
The phone is good, its a new phone.
When i connect my phone with my bluetooth speaker or another phone ,i can go much further then 10 meters.
I read somewhere that the bluetooth is a problem with this watch.
I was thinking,maybe someone has a solution for this.
carlospaco said:
The phone is good, its a new phone.
When i connect my phone with my bluetooth speaker or another phone ,i can go much further then 10 meters.
I read somewhere that the bluetooth is a problem with this watch.
I was thinking,maybe someone has a solution for this.
Click to expand...
Click to collapse
You could try another firmware but I'm not sure if is compatible Aplus GV08, I wouldn't try, if the bootloader is different you brick your watch forever
Golem_ said:
You could try another firmware but I'm not sure if is compatible Aplus GV08, I wouldn't try, if the bootloader is different you brick your watch forever
Click to expand...
Click to collapse
I was thinking of the firmware from the DZ09.
Its almost the same phone , has the same specifications.
carlospaco said:
I was thinking of the firmware from the DZ09.
Its almost the same phone , has the same specifications.
Click to expand...
Click to collapse
Get please in phone info (*#8375# or *#998375#) and give me version, branch and build time
As well, get in engineer menu (*#6346633# or *#993646633#) and there has to be some hardware info, check if there you have the flash ID
If something is incompatible in the best case the flashing will not start, the worst your bootloader will load wrong file, and phone gets bricked when tries conn between hardware and drivers...imagine, phone bricked and the modem (com port) is full inactive . . .
Very important, before any flashing do Readback from 0x00000000 to 0x01000000 - in this way if something is not working (is happening even for phones from same series because different hardware) you can go back to original firmware
Now I read that this watch has display IPS and camera off 2MP, If it is true then is not the same PCB even if the processor is the same
Golem_ said:
Get please in phone info (*#8375# or *#998375#) and give me version, branch and build time
As well, get in engineer menu (*#6346633# or *#993646633#) and there has to be some hardware info, check if there you have the flash ID
If something is incompatible in the best case the flashing will not start, the worst your bootloader will load wrong file, and phone gets bricked when tries conn between hardware and drivers...imagine, phone bricked and the modem (com port) is full inactive . . .
Very important, before any flashing do Readback from 0x00000000 to 0x01000000 - in this way if something is not working (is happening even for phones from same series because different hardware) you can go back to original firmware
Now I read that this watch has display IPS and camera off 2MP, If it is true then is not the same PCB even if the processor is the same
Click to expand...
Click to collapse
No it has a 0,3 megapixel camera.
This is the info i have got:
Version:
L99_HW_V1.3_V04
BRANCH:
11BW1308MP L99
MRE VESION 3100
MOTION SENSOR: BM
A250_I2C
This is the seller i got it from: http://www.benl.ebay.be/itm/GV08S-l...hash=item41a182368a:m:mIXbGfMumgY5B6uWwy9wW-Q
carlospaco said:
No it has a 0,3 megapixel camera.
This is the info i have got:
Version:
L99_HW_V1.3_V04
BRANCH:
11BW1308MP L99
MRE VESION 3100
MOTION SENSOR: BM
A250_I2C
This is the seller i got it from: http://www.benl.ebay.be/itm/GV08S-l...hash=item41a182368a:m:mIXbGfMumgY5B6uWwy9wW-Q
Click to expand...
Click to collapse
Do first a ROM dump with readback as I explained before and after try it, it looks like being same even if eventually incompatibilities with camera or display, you can go back and install your original
Golem_ said:
Do first a ROM dump with readback as I explained before and after try it, it looks like being same even if eventually incompatibilities with camera or display, you can go back and install your original
Click to expand...
Click to collapse
Ok thank you for your help, will try it later.
To whom it may concern - thread - watch face collection
http://forum.xda-developers.com/sma...ches/watchface-collection-smartwatch-t3299481
Hi. I need the gv08 original firmware pls
obuz78 said:
Hi. I need the gv08 original firmware pls
Click to expand...
Click to collapse
check in firmware collection - link -
carlospaco said:
No it has a 0,3 megapixel camera.
This is the info i have got:
Version:
L99_HW_V1.3_V04
BRANCH:
11BW1308MP L99
MRE VESION 3100
MOTION SENSOR: BM
A250_I2C
This is the seller i got it from: http://www.benl.ebay.be/itm/GV08S-l...hash=item41a182368a:m:mIXbGfMumgY5B6uWwy9wW-Q
Click to expand...
Click to collapse
Can you share your readback file with me... I deleted my firmware from my smartwatch so need a firmware...
obuz78 said:
Can you share your readback file with me... I deleted my firmware from my smartwatch so need a firmware...
Click to expand...
Click to collapse
all the firmwares, inclusive carlopaco's one are in the firmware collection!!!
But non of theme is compatible with my watch... I will need the gv08s firmware which was done by readback.
My watch is Molibao X6....with ips screen...
It is similar to colmi T7...
When i flash the dz09,gv08, or gt08 firmware, screen colors is Weird ,mixing and reversing...
I need your
GV08S clone
Hello guys!
Today I received my pressumably GV08S watch that I bought a couple of weeks ago from Aliexpress. The goddamn seller said on the description that the watch featured a Mediatek 6160A processor, but, in reality, I think I ve received a knock off. Why am I saying that? Well, the damn thing has a spartan menu, there are no themes options, like I saw in some reviews on youtube, there is no notification bar when sliding from up to down and the examples may continue. I had an argument with the seller who said the watch is original, I got agravated so I am gonna open up a dispute...that little s..h...i...t. got me out of my minds. The problem is that being nervous, I tried to flash other rom on the watch and I saw that it only accepts MTK 6261 software in the limit of 32 mb. Being nervous, I didn t make a backup of the original software so now the watch is kinda useless. Can u help me with the original version of the software? This are some tehnical date which I extracted from the secret menu:
Version info summary: LD991_JPL_S1_CAM3A01_ZLX7789_9304_IPS_LANGA_V1.0
BRANCH : 11CW1352MP
MTK61D_BTDIALER_11C
BUILD TIME 2016/04/12 12:04
Where can I find a suitable rom for this s...h...i...t? Thank you in advance and sorry for my french but I am damn agravated by that little rice eating motherlover that mislead me into buying this crap.
Have a great day and greetings from Romania!
Kmcoio said:
Hello guys!
Today I received my pressumably GV08S watch that I bought a couple of weeks ago from Aliexpress. The goddamn seller said on the description that the watch featured a Mediatek 6160A processor, but, in reality, I think I ve received a knock off. Why am I saying that? Well, the damn thing has a spartan menu, there are no themes options, like I saw in some reviews on youtube, there is no notification bar when sliding from up to down and the examples may continue. I had an argument with the seller who said the watch is original, I got agravated so I am gonna open up a dispute...that little s..h...i...t. got me out of my minds. The problem is that being nervous, I tried to flash other rom on the watch and I saw that it only accepts MTK 6261 software in the limit of 32 mb. Being nervous, I didn t make a backup of the original software so now the watch is kinda useless. Can u help me with the original version of the software? This are some tehnical date which I extracted from the secret menu:
Version info summary: LD991_JPL_S1_CAM3A01_ZLX7789_9304_IPS_LANGA_V1.0
BRANCH : 11CW1352MP
MTK61D_BTDIALER_11C
BUILD TIME 2016/04/12 12:04
Where can I find a suitable rom for this s...h...i...t? Thank you in advance and sorry for my french but I am damn agravated by that little rice eating motherlover that mislead me into buying this crap.
Have a great day and greetings from Romania!
Click to expand...
Click to collapse
Salut! did you check this thread?
dz09 unusual 32Mb, also check gt08s, gv18 unusual 32Mb, jv08s
Use your money wisely, DO NOT WASTE IT buying from GEARBEST
None of those work corectly. It might be a newer build.
carlospaco
do you have the original rom for gv08s? i need it so badly.
Aye Sir said:
do you have the original rom for gv08s? i need it so badly.
Click to expand...
Click to collapse
http://forum.xda-developers.com/smartwatch/other-smartwatches/mtk6260-firmwares-t3306203
Use your money wisely, DO NOT WASTE IT buying from GEARBEST