Database Users

How I did my ROM upgrade to WM6 PDAVIET

After reading and made some big mistakes I've found this process:
Its very simple, around 1h job. : P
If you can access to the bootloader (press camera, use stylus and press reset, release reset) and you see your original IPL/SPL everything is ok. (you can now take a deep breath)
Reboot your PC. In bootloader mode connect USB cable to Prophet and PC. ActiveSynk will not give you any response.
I used the file RUU_Prophet_220734_2207114_024721_NVID_QTEK.exe dowloaded from xda-developers ftp while the Prophet was in bootloader mode and connected via USB to computer. (I just cant find it to give you the link, but let me know if you need it)
you just have to click next [a la windows...]
You should hard reset your Prophet (camera + commmanager key, use stylus and press reset, release reset, click call button when asked)
You should be able to use ActiveSynk now!
After that I installed the Cert_SPCS.cab and EnableRapi.cab, no reset was needed.
Then installed the Prophet_4.0.0.0.1_PV rom by running Upgrade_ROM.bat from the computer. ( http://forum.xda-developers.com/showthread.php?t=308266
)
Done with success!!!!
Hope this helps... Let me know if it did ; )
Luis
Note: so far so good, no bugs/flicks, everything seems to work like it should. A very very nice work from PDAVIET crew

active sync seam not working ??
i'm using version 4.5?

uk19xx said:
active sync seam not working ??
i'm using version 4.5?
Click to expand...
Click to collapse
Just follow the procedures and you will have everything working. Don't know exactly what is 4.5, but nevertheless beware that in bootloader mode activesynk will not give you any response.

When in bootloader mode (the known tri-color screen), ActiveSync doesn't recognize the device. This is a normal behaviour.
4.5 is the latest ActiveSync version, BTW.
After that I installed the Cert_SPCS.cab and EnableRapi.cab, no reset was needed.
Then installed the Prophet_4.0.0.0.1_PV rom by running Upgrade_ROM.bat from the computer. ( http://forum.xda-developers.com/showthread.php?t=308266
)
Click to expand...
Click to collapse
You don't need to install those CABs prior to upgrading to the WM6 rom. The UPGRADE_ROM.BAT file does that for you. Edit it and check for yourself

PLEASE PLEASE PLEASE!!! don t let my Universal be DEAD!!!!!!*** HELP ME PLZ!!!

Guys,
I ve just downloaded this http://rapidshare.com/files/21256078..._DUT_11500.rar romversion in the understanding that it was for the HTC 9000 PDA. There was a file called MaUpgradeUt_noID.exe which I let 'upgrade' my 9000. However, I think something very VERY big went wrong! A reset by pushing the 2 buttons and reset button on the back gives me the option 0 to reset but all I can see after that is a black screen which says USB at the top and at the bottom v1.00
What happened and is this the end of my PDA? Sync won t work anymore now since my PDA can t be detected by windows because I can t get in the PDA!!!
Is there something I can do??!!!
PLEASE HELP ME OUT!!!!
Edit/Delete Message

sounds like you're just in bootloader mode
I think you are in what's called bootloader mode. Read the wiki to check - the screen you are describing sounds normal to me you plug you device into the comp via usb (with sync over usb disabled in active sync) then install a new rom.
You really shouldn't have tried to flash your rom without reading some instructions first but I think that your device should be fine.
If you have already upgraded your rom just do a hard reset and select the option to reset.

Will this thread help?
http://forum.xda-developers.com/showthread.php?t=310056

I'm sorry, this is the thread I ment to link:
http://forum.xda-developers.com/showthread.php?t=310054

strangely enough I found out that I DID use a good version picked from this http://forum.xda-developers.com/showthread.php?t=298020 post. In this thread mwang gives a link to here http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,40,30486,30486#msg-30486 where I picked the dutch version. I than double clicked the MaUpgradeUt_noID.exe file and the software for upgrading started. When he was at 100% he said the the ROM update was completed and that I had to do a reset. So, I than pushed the three buttons (2x the - button and the reset button at the back of the 9000) but all I than see is the bootloader menu with USB and V1.00...........
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!

sanderh said:
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!
Click to expand...
Click to collapse
Rather late now, but if it's owned by your company for work, should you really be di**ing with it?

Solution to probl: Stuck in Bootloader
The one way of fixing your problems....you're officialy stuck in bootloader,
Here's the way to fix it:
1. Stop Activesync USB connection on your machine under connection settings.
2. Uni : Reboot Bootloader then Connect USB ( If your phone isn't in bootloader already..)
3. PC : Run mtty1.42.exe ( Download from XDA's ftp site or search the forums, I'm sure you'll find it.)
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5.1 Press Enter
5.2 USB> (This will show up)
6. Type: Set 14 0
7. Press Enter
8. Run your rom update again and it should flash this time.

did it start??
did it start?? ?

Hi. first post.
Have an o2 exec. Different brand same deice and none of the other methods worked but finally got it working. Using mtty1.42.exe it would not see usb connection and therefore could not go down that route.
I booted into the bootloader mode that says serial at the top and v1.00 at the bottom.
Connected to the pc and cant remember if i stopped wcescomm.exe or not but you can try both ways.
Then started Midget_1990_v1_0_PU10_WWE.exe rom and followed the instructions and voila.
Hope this helps someone.

"Using mtty1.42.exe it would not see usb connection"
You need to disable the usb connection of active sync under connection settings and then only mtty will pick up a usb connection..

Hp 6945 Stuck at Serial and Hp invent logo

Hello Everyone
I need big time help. I just bought Hp 6945 and I tried to update GSM rom from 1.02 to 1.08, while updating it says update fail and try to restart Ipaq and start again. Now My problem is Ipaq just stuck to Hp invent logo. I tried to reset and hard reset and remove battery but notthing work.
I need help
Could some please help me to How to fix this problem?
Thank you

same BS happened to me. the only way to fix it is to load the UK 6915 ROM. thats the ONLY way to fix it. AVOID this update do not try to update the radio. I bricked my phone doing this. STILL looking for a solution. Radio stack is daamged.

where Can I find Uk 6915 rom
Thank you for reply. Where can I found the UK 6915 rom. Is there any instruction to How to load rom?
Thank you

If is FIXEDDDDDDDDDD
Ok
I got it fixed, very simple solution
found it here
http://pdaphonehome.com/forums/hp-h...dowloaded-rom-update-ipaq-dead-need-help.html
Solution:
this is what I did to get this fixed.
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK
Thank you to origianl solution provider

No network connection
Ok everything work fine, but Now I cann't connect to tmobile. It keep showing me no service.
Any Help please

Ok It is fixed again
There is another update at HP website, which is software update. After installing that everything working fine.

can anyone help? i just bricked my ipaq 6965 too. had already followed those few instructions without any success.. what do you mean by "with or without SIM card"?

After a soft reset, mine's stuck at the initial blue/white boot screen.
Hard reset doesn't work (assuming its call + hang up + power + poke reset).
Ideas?

bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845/Ipaq_HW69XX_ENG_ROM.zip.html

download files from rapidshare posted by me ,r tested on my phone

hi i have tried to dl the rom asi having the same prob but the file cannot be downloaded. is there any other way to get from you

garyakw said:
hi i have tried to dl the rom asi having the same prob but the file cannot be downloaded. is there any other way to get from you
Click to expand...
Click to collapse
If you are stuck on a HP Invent Screen, with G.39, etc.
And you have tried to hard reset and softreset with no luck, this is what you do.
XP Instructions:
1. Download this link http://www.mediafire.com/?3ygfbx0sjdy
2. In the taskbar area in the right hand corner, right click on activesync, bare with me, I'm using Vista and have to remember this, click connections..., you need to uncheck everything click ok or apply...
3. press ctrl-alt-delete, end process wscescomm.exe, (named something like that, end the process.
4. Extract the file you downloaded if needed.
5. Connect your device to the usb port on your computer.
6. Run Uni Exit Bootloader Application. Done
Vista Instructions:
1. Download these 2 links, and extract them if necessary.
http://www.mediafire.com/?3ygfbx0sjdy
http://www.mediafire.com/?9pmjkponfsg
2. Start Device Manager, (Start-Control Panel, Class View[Far Left Corner])
3. Connect HW6900 to USB port, you should now see a Mobile Devices (Next to + sign), Double Click
4. Right-Click on the Device, Click Update Driver Software, Choose let me pick from a list, Uncheck compatible hardware box.
5. Click have disk, Browse to location where USBAS is extracted, choose the wceusbsh.inf file, Double Click.
6. You should see Microsoft USB Sync, if not and it reverts back to the already installed file, and the box rechecks itself, uncheck it, choose microsoft, and choose the latest Microsoft USB Sync to install
GOOD LUCK

in reference to
Default bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845...G_ROM.zip.html
its a no go here...

i get error 402.... times out and no can do.... what was that about german language... maybe i just need it spelled out. which screen does the unit need to be in. there is two... monochrome serial vs usb and there is the hp logo blue and white screen frozen indefinitely... please help i love this phone...

Hi, the rapidshare file is missing!
Could you give working link or send me the file to mail, please?

ipaq dude said:
Ok
I got it fixed, very simple solution
found it here
http://pdaphonehome.com/forums/hp-h...dowloaded-rom-update-ipaq-dead-need-help.html
Solution:
this is what I did to get this fixed.
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK
Thank you to origianl solution provider
Click to expand...
Click to collapse
Man,r u sure the above can work well???? Confusing......I did the above like u indicated,but it's not work on my device HP6915,could u make it in details how u fixed the problem of updating ur device,thanks!
Regards,
Brose

Thanks, This help get me out of freeze
Thanks for posting this link. It brought my hw 6945 back out of the freeze. Stay away from HP's site update. Bad news
johnnynomadic said:
in reference to
Default bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845...G_ROM.zip.html
its a no go here...
Click to expand...
Click to collapse

Thanks for UNIEXITBOOTLOADER thing, it makes my 6965 rocks again! Btw, could this file be used on other pdaphone such as O2 Atom? Thx b4.

Maybe
Most Likely Yes
bmw2320 said:
Thanks for UNIEXITBOOTLOADER thing, it makes my 6965 rocks again! Btw, could this file be used on other pdaphone such as O2 Atom? Thx b4.
Click to expand...
Click to collapse

cdguider said:
Most Likely Yes
Click to expand...
Click to collapse
I don't think so,Curtis.....But as I know most of dopod device hardly be dead....

XDA11i Serial V1.01

Hi all, Hopefully some wise person can assist me.
I downloaded a ROM update for my XDA11i from this site :Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed which was highlighted for a Alpine. However on running the update you get a picture of a MDA and a message "The ROM upgrade utility does not design for your device. Please get proper ROM upgrade utility and try again"
Unfortunatly my XDA11i is now stuck on a blank screen with Serial V1.01 and is not recognised by activsync or My computer. However in the cradle the screen shows USB V1.01
I have tried installing the official O2 ROM update: AP_O2UK_11100_169_10000_ShipXdaIIi but get the following message Error 101: connection error. I assume because my XDA is not recognised by Activsync.
I have spent days trawling the forum and trying the various solutions to no avail. Most of the links are dead as in archive.
1. On reset and hard reset the serial text only dims.
2. I tried the process posted by CelticLo and copied a ROM image to a SD card, however again on hard reset the sserial text only dims.
Any assistance would be very much appreciated.

Have you tried updating to the latest version of Active Sync on XP
or following the guide for Vista

Take off battery. wait for about 10 hrs. put back battery and switch on the power.

Thanks for the tip's
I have tried Activesync on XP and Vista still does not work.
I have removed the battery for two days and recharged it through the cradle, on returning the battery and switching on. It returned to the serial screen.
I tried flashing with the following rom : [Maxishare_net]alpine-1.11.171-radio-1.04-bluetooth-patched-camera-fixed again i get the message it is the wrong ROM??
I can not understand why I keep getting the wrong ROM message as it is definetly a XDA IIi PH10C
thanks anyway

Furkinl said:
I have tried Activesync on XP and Vista still does not work.
I have removed the battery for two days and recharged it through the cradle, on returning the battery and switching on. It returned to the serial screen.
I tried flashing with the following rom : [Maxishare_net]alpine-1.11.171-radio-1.04-bluetooth-patched-camera-fixed again i get the message it is the wrong ROM??
I can not understand why I keep getting the wrong ROM message as it is definetly a XDA IIi PH10C
thanks anyway
Click to expand...
Click to collapse
erm u are trying to flash on a pc running vista?? thats your problem, u cannot flash on a vista pc, xp home/pro ONLY!

Thanks for the advice, tried on XP and it worked fine, it would seem that activsync was not required in this case. At least my XDA is ALIVE for now.
many thanks

You simply could revive it again by Resetting it via the stylus

thnx 4 all the soloutionsss
i had same problem , but once i tried it on xp, its works for me, my ppc now is refresh installed,
thnxx

qtek 2020i
for information the french rom is available on this place http://www.planete-htc.com/index.php?mod=download choose dangaard section there is two files to download
1. choose 2020i dangaard rom
you can not use it
2 download the radio file
it contains an exe called upgradeut make it in the directory of your dangaard folder and you will be able to flash it
it work also for pda stuck in serial usb
voila

qtek 2020i
radio file 1.04 two mega

do a hardware resett and it should be the phone back to defaults

XDA IIi V 1.01 Serial /USB
Hello,
I tried to update my XDA IIi from a new rom version found at o2.ie website but my XDA IIi is stuck and showing Serial on top and v 1.01 at botom. When i attach it with cardle it shows USB instead of serial.
I have tried Almost everything that i found on this forum in last three days.
Hard reset / soft reset/ new installation using different version etc.. but nothing worked for me..
Now I am really confused and can't find what to do.. Can any one from XDA gurus/ developer help me and sumarize what should i do?
Thanks in Advance
Zeeshan

Yes, i have the same problem i did exactly what was done above me pls can someone help!!!!!!!!!

Furkinl said:
Hi all, Hopefully some wise person can assist me.
I downloaded a ROM update for my XDA11i from this site :Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed which was highlighted for a Alpine. However on running the update you get a picture of a MDA and a message "The ROM upgrade utility does not design for your device. Please get proper ROM upgrade utility and try again"
Unfortunatly my XDA11i is now stuck on a blank screen with Serial V1.01 and is not recognised by activsync or My computer. However in the cradle the screen shows USB V1.01
I have tried installing the official O2 ROM update: AP_O2UK_11100_169_10000_ShipXdaIIi but get the following message Error 101: connection error. I assume because my XDA is not recognised by Activsync.
I have spent days trawling the forum and trying the various solutions to no avail. Most of the links are dead as in archive.
1. On reset and hard reset the serial text only dims.
2. I tried the process posted by CelticLo and copied a ROM image to a SD card, however again on hard reset the sserial text only dims.
Any assistance would be very much appreciated.
Click to expand...
Click to collapse
Where can I download this rom?
Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed
Thanks in advance
Chet

look and lern
put qtek 2020i in stativ (conect to pc via usb)and push power ( on screen will apear USB and v1.01), and you dezarhive :astel_wwe_11100_112_10200_ship, and doble klik on AlUpgradeUt and bios at ppc wil be update !!!!! This is all, the ppc will be now reinstaling, be patient and wait until will be reinstaled (25 min)

X2 cannot find driver when trying to update with SEUS

Hello!
I got a really annoying problem when trying to update my girlfriends X2 with SEUS (SonyEricsson Update Service).
What i do is: I start SEUS and klick next until the instructions comes up.
Enter "bootloader mode", pressing the volume down and power button so the SE logo with the white background shows and then connect the micro-usb cable to the phone...
BUT
After that the computer finds a new hardware: "Data interface"... When i let it find the drivers it does'nt find any drivers... When I click "finish" it continues to find 3-4 more "Data interface" with the same result.
Anyone know how to bypass this?
THE REASON TO WHY I NEED TO UPDATE THE PHONE!:
The phone is empty... I wanted to factory reset the phone, and everything did well until it tried to customize (install the X2 specific tools) the phone...
It freezes at "_setupJbed.CAB"

What OS are you running? Is it allowed to check with Windows Update (for example) for drivers etc?
It really should not be a problem. If you are running the latest version of SEUS. You could remove, re download and re install SEUS an then try again. SUES is supposed to install that generic plug and play driver on your system.

4m4s0 said:
Hello!
I got a really annoying problem when trying to update my girlfriends X2 with SEUS (SonyEricsson Update Service).
What i do is: I start SEUS and klick next until the instructions comes up.
Enter "bootloader mode", pressing the volume down and power button so the SE logo with the white background shows and then connect the micro-usb cable to the phone...
BUT
After that the computer finds a new hardware: "Data interface"... When i let it find the drivers it does'nt find any drivers... When I click "finish" it continues to find 3-4 more "Data interface" with the same result.
Anyone know how to bypass this?
THE REASON TO WHY I NEED TO UPDATE THE PHONE!:
The phone is empty... I wanted to factory reset the phone, and everything did well until it tried to customize (install the X2 specific tools) the phone...
It freezes at "_setupJbed.CAB"
Click to expand...
Click to collapse
what spwcific tools-u meses upp x2...you have to flash it with the box-only service shops or SE store have that box and programs to solve that..if u are nota able to turn on x2 and do again factory reset-x2 is done. go to service shop

mtechfan said:
What OS are you running? Is it allowed to check with Windows Update (for example) for drivers etc?
It really should not be a problem. If you are running the latest version of SEUS. You could remove, re download and re install SEUS an then try again. SUES is supposed to install that generic plug and play driver on your system.
Click to expand...
Click to collapse
Windows Mobile 6.5
Yes it is allowed to check with Windows Update. I did it too but it did'nt find anything that way...
Yeah I know.. Last time it did install the generic PnP drivers, but now it does'nt...

kronos1 said:
what spwcific tools-u meses upp x2...you have to flash it with the box-only service shops or SE store have that box and programs to solve that..if u are nota able to turn on x2 and do again factory reset-x2 is done. go to service shop
Click to expand...
Click to collapse
The customizations programs...
what?!
I am able to turn it on, but it's like an empty windows..
Everytime I restart the phone it asks me if I want to factory-reset it, and when I tap "Yes" it freezes at istallation of "_setupJbed.CAB"

4m4s0 said:
Windows Mobile 6.5
Yes it is allowed to check with Windows Update. I did it too but it did'nt find anything that way...
Yeah I know.. Last time it did install the generic PnP drivers, but now it does'nt...
Click to expand...
Click to collapse
I was referring to the OS on the computer, not the phone.

mtechfan said:
I was referring to the OS on the computer, not the phone.
Click to expand...
Click to collapse
Oj... Sorry... WinXP SP3

you must install microsoft activesync 4.5 first.
===unreail from china===

unreail said:
you must install microsoft activesync 4.5 first.
===unreail from china===
Click to expand...
Click to collapse
Already did that...

I have an idea for you.
Press no to the factory reset and let the phone start up, then...
yes, I know this is tedious but install all the individual cabs from an extracted ROM you want one by one. When completed you should have a full version again. You can even try to see if the update works again.
Check here -> http://forum.xda-developers.com/showthread.php?t=683619
Please make sure you only install the cabs relevant to which OS you have o the phone. This means... if you have 6.5.2 then only get cabs from a 6.5.2 Rom. Ditto for 6.5.3
As you may have heard already, I am moving over to Android now and have sent my X2 back. So I am sorry I cant help any more than this.