Database Users

8525 Touchscreen Has Gone Crazy

Ok so my Cingular 8525 is basically unusable due to the touchscreen thinking it's getting taps in the upper right corner (upper left in landscape mode). This has the nice effect of closing programs down to the today screen in portrait mode or constantly popping up the start menu in landscape mode (about three times a second). Any ideas?
I tried soft resetting and also removing the battery for several minutes. Haven't tried a hard reset as I don't want to go through that except for a last resort. Tried wiping the screen with a soft cloth. There are no weird programs on the device except what everyone here uses.
I still have 5 days before the end of my 30 days return period with Cingular. If I bring it back will they just give me another one?

aroundlsu said:
Ok so my Cingular 8525 is basically unusable due to the touchscreen thinking it's getting taps in the upper right corner (upper left in landscape mode). This has the nice effect of closing programs down to the today screen in portrait mode or constantly popping up the start menu in landscape mode (about three times a second). Any ideas?
I tried soft resetting and also removing the battery for several minutes. Haven't tried a hard reset as I don't want to go through that except for a last resort. Tried wiping the screen with a soft cloth. There are no weird programs on the device except what everyone here uses.
I still have 5 days before the end of my 30 days return period with Cingular. If I bring it back will they just give me another one?
Click to expand...
Click to collapse
on your touchscreen problem.. i have seen this occur by someone improperly putting on a screen protector or maybe there is some dirt up there.. and if you take it back to the store they may give you a new one or make you call the warranty by mail line and get a replacement that way

..... or your OK button could be stuck down

I took a bottle of lens cleaner from my camera bag and thoroughly cleaned the screen. I ran my fingernails under the edge of the screen and really made sure no dirt was under there. Lo and behold, it seems to be working fine now. I browsed some RSS headlines for about 10 minutes with no problems.
Weird though, I have used an Ipaq 4705 WM5 pocket pc for two years now and really ran it through the ringer. It looks like it's been to war and back (which it has in a since) and never experienced errant screen taps. Oh well, still enjoying the 8525 (last phone was 2125).
Thanks so much!

kevino said:
..... or your OK button could be stuck down
Click to expand...
Click to collapse
good point, i had that problem once also, forgot all about it

aroundlsu said:
I took a bottle of lens cleaner from my camera bag and thoroughly cleaned the screen. I ran my fingernails under the edge of the screen and really made sure no dirt was under there. Lo and behold, it seems to be working fine now. I browsed some RSS headlines for about 10 minutes with no problems.
Weird though, I have used an Ipaq 4705 WM5 pocket pc for two years now and really ran it through the ringer. It looks like it's been to war and back (which it has in a since) and never experienced errant screen taps. Oh well, still enjoying the 8525 (last phone was 2125).
Thanks so much!
Click to expand...
Click to collapse
Just a note of caution!!! This is related to the screen alignment issue i.e. the touch sensitive area of the screen continuing beneath the bezel and causing unwanted touches whether through dust or the sticky gasket in there.
May not return, or will be cured again by the "business card" fix / or as you did a firm clean to release the screen from touching the bezel.
But, it's a question for you, if you only have 5 days left under warranty. Most people with the SA problem find the first signs appear in the first couple of weeks. I would certainly put it through it's paces, open up a few applications leave wifi on so it heats up, surf web over wifi etc etc as the added bit of heat generated internally was a known factor in exacerbating the problem. If all stays well over next couple of days maybe it'll be OK.
Would be good to get urgent feedback from anyone with a newer Hermes who's had this issue and what happened.
Mike

Argh, it's back. OK, I'm certain it's a touchscreen problem and not a button sticking as holding down OK will not cause the start menu to pop up while an application is up and holding the windows key will not close an app. Also the problem is delayed if I hold the stylus down on the screen. It's just the upper right (portrait mode) of the screen that is getting the errant screen tap (about three or four times a second).
I've ran a business card through the edges and it doesn't help. I'm not going to take this thing apart. I did that several times with the 2125 to fix unresponsive keys and joystick but the problems always reappear. My one year old 2125 is barely functional now. My g/f would rather keep her crap LG flip phone then inhieret the 2125 after watching me battle it. That's pretty sad.
I'm going to try a hard reset (second one in three weeks) and if that doesn't help I'm returning it to Cingular and getting my money back. Then I'll either buy another one or a blackjack. I like the 3g and love this device. It's my third Windows Mobile 5.0 product. I don't like the sub-par build quality on my second HTC product now. I paid $599 plus tax for this phone at a local Cingular store (despite the web store saying $550).

My advice for what it's worth is take it back. This screen business has a habit of coming and going and it's entirely possible you hard reset and everything is fine and two weeks later it's back. Also would be better to return with the issue present (not that they wouldn't believe you -would they?)
On the whole though this problem is much more rare than it was, so if you do get the same device again hopefully you will be luckier. If you get directly from shop though check the firmness of the key board clicking into place that seems to still be fairly common problem.
Not the best start to the new year!!
Mike

Well I got desperate and hard reset... I could barely get past the screen alignment startup so needless to say that didn't fix things. Having gone this far and thoroughly pissed at having to reinstall everything I decided to loosen those screws on the back and run a card around the edges.
So far, it's working! I'm not content settling on this hack though so I'm bringing it back Tuesday and will update on my experience at the retail store (not looking forward to that).
Happy new year and thanks for all the super fast responses guys!

Alignment
I was browsing the www the other day and saw a korean/ japanese site showing the inside of these precious devices, and (as pointed out above) how the seal/ gasket underneath the bezel is the root cause of our anguish.
There were some detailed pics of how you can DIY, and remove the gasket, but it's no where near me basic level of competency.
Why would they design a touch-screen to big for the device I wonder???

there is also the business card trick about sliding it underneath the edges to loosen the gasket... there is a whole thread on this screen alignment issue

what site shows how to fix the gasket?
There is a post about someone seeing a site showing how to fix the gasket proplem on the touch screen. Could I please get the URL??

johniz1967 said:
There is a post about someone seeing a site showing how to fix the gasket proplem on the touch screen. Could I please get the URL??
Click to expand...
Click to collapse
Look down this page. Keep in mind non of the theoretical solutions is guaranteed/
http://wiki.xda-developers.com/index.php?pagename=Hermes_Problems
Mike

Just got back in from my local Cingular store and actually had a pleasant, hassle-free experience exchanging my 8525 for a brand new one. I explained to the CSR the issue and she immediately understood the problem (must not be the first guy walking in there about this).
Unfortunately, she didn't have any in stock but merrily called around and found six others in stock at nearby stores. So off I went to the next store and had the old 8525 exchanged for a new one in less then ten minutes. The CSR didn't even bother to look at the old phone or check the accessories I returned with it.
The new 8525 is syncing up as I write this and immediately I notice some things are different. First of all, written on the side of the box is 12/26. So we know this phone is probably brand new. The keyboard does indeed click in and out more firmly then my old one. The USB cable plugs in tighter (a good thing, I was always getting USB connection problems), and lo and behold Windows Vista installed HTC sync drivers then Media Player automatically recognized the device (never did any of that on the old one).
I'm using the Windows Mobile Device Center Beta on Vista RTM and it just finished syncing without any problems. Moral of this story is if your 8525 is experiencing any problems at all and you are within 30 days, return it for a hassle free refund.

Good news and you're absolutely right about getting it back within warranty if there's a fault.
Great stuff!
Mike

aroundlsu said:
Just got back in from my local Cingular store and actually had a pleasant, hassle-free experience exchanging my 8525 for a brand new one. I explained to the CSR the issue and she immediately understood the problem (must not be the first guy walking in there about this).
Unfortunately, she didn't have any in stock but merrily called around and found six others in stock at nearby stores. So off I went to the next store and had the old 8525 exchanged for a new one in less then ten minutes. The CSR didn't even bother to look at the old phone or check the accessories I returned with it.
The new 8525 is syncing up as I write this and immediately I notice some things are different. First of all, written on the side of the box is 12/26. So we know this phone is probably brand new. The keyboard does indeed click in and out more firmly then my old one. The USB cable plugs in tighter (a good thing, I was always getting USB connection problems), and lo and behold Windows Vista installed HTC sync drivers then Media Player automatically recognized the device (never did any of that on the old one).
I'm using the Windows Mobile Device Center Beta on Vista RTM and it just finished syncing without any problems. Moral of this story is if your 8525 is experiencing any problems at all and you are within 30 days, return it for a hassle free refund.
Click to expand...
Click to collapse
since your appears to be new from 12/26.. i am curious what firmware is on that phone.. details please

Cingular 8525 touch screen no working
I am having a problem with the touch screen on my 8525. My phone was working fine then the then the screen stopped responding. I was able to navigate via keyboard but that was it. I did a soft reset and it did not help. I then did a hard reset and the screen went to the setup and wants to align the screen which obviously I cannot do.
The changes I have made the same day prior to it not working are as follows:
-Unlocked with Hermes SIM Unlock
-Installed latest Cingular ROM
-Installed fit4cat Hermes Tweaker v1.1a
The phone worked fine for about 12 hrs before the touch screen stopped working.
Any suggestions?

Hey there, I have had the problem before (about 3.5 weeks ago). I had to send it in for service (since I am not a Cingular customer anymore but use the 8525 with T-mobile).Good luck.
wedgesurfer said:
I am having a problem with the touch screen on my 8525. My phone was working fine then the then the screen stopped responding. I was able to navigate via keyboard but that was it. I did a soft reset and it did not help. I then did a hard reset and the screen went to the setup and wants to align the screen which obviously I cannot do.
The changes I have made the same day prior to it not working are as follows:
-Unlocked with Hermes SIM Unlock
-Installed latest Cingular ROM
-Installed fit4cat Hermes Tweaker v1.1a
The phone worked fine for about 12 hrs before the touch screen stopped working.
Any suggestions?
Click to expand...
Click to collapse

Crazy Tytn screen and button problem, please help

Hi all, this is my first post on this forum but I've been reading for a while to educate myself.
I've got a Herm200 that I've been trying to troubleshoot but to no avail. I'm fairly certain that it has a hardware problem but I haven't been able to isolate anything.
Here's whats happening:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
When the screen turns all white a soft, hard, or stand-by cycle will not always bring it back to life. The fact that the hard reset wont always fix the problem makes me think it's a hardware issue since the phone will boot-up with the the all-white screen.
This is incredibly frustrating especially since HTC wont accept any warranty claims in the USA on the Tytn.
At first I thought this might be a problem with the ribon connection between the screen and the base but i haven't been able to confirm or discount anything at this point. I have yet to find a way to consistently reproduce or rectify the problem so it's very hard to troubleshoot.
I pretty much have to take a second phone with me everywhere right now just incase i need to make a call. Please help! Has anyone ever encountered such a problem?
Thank you in advance!

SneezyRobot said:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
Click to expand...
Click to collapse
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.

wow... that sounds like exactly what's going on here, I actually even tried to disassemble it lastnight but didnt have the right driver set. thank you for the advice!
I'll look for one of those sets but what would you search for if i needed to find it?

Thanks again, I just got a set off of Ebay. Hopefully it'll be here next week
With any luck it'll be a connection issue.

I have had the exact same problem. Because I got the Tytn through work I made our IT department handle the issue and I am currently waiting for a replacement and to find out what happened.

Yep, it looks like the problems the OP is having are very similar to the problems we've been having over in this thread:
http://forum.xda-developers.com/showthread.php?t=291027
I'm beginning to think it's a hardware problem as well but not entirely sure.
People in the above thread mentioned that using the scroll wheel a while then moving back to use the D pad fixed the problem (very briefly in my case.) Once I use the center D pad button again it locks the hardware buttons under the screen until I make my device sleep and resume.
Somtimes rather than making all the front hardware buttons unresponsive the issue is that once I use the Down Dpad button I can't use the up button. Pressing up will make it go down, as will pressing down (at least that's working ).
Regarding the white screen - this sometimes also occurs. I can force it to white screen by putting a little pressure on the silver panel surrounding the top, right and bottom of the screen (I have an imate jasjam). Randomly when there's no pressure on the rim and I wake it out of standby, it has a white screen that can only be fixed by turning the screen off and on again.
Finally, the LED indicator seems screwy. Sometimes it never flashes. Other times it flashes sporadically (uneven intervals - we're talking maybe a minute between one flash then seconds before another). When I charge it sometimes the LED doesn't come on but nevertheless it charges. Sometimes if the LED is on it never turns green to indicate a full charge. Yet other times it comes on orange, turns green, then never switches off!
Is it possible that
a) The hardware button problems.
b) The white screen problem.
c) The LED problem.
are all related to some kind of connection going loose? Why would the hardware button problem be temporarily fixable with use of the scroll wheel if this were the case?
The other thread has fallen silent. I'm hoping that some of the gurus in here can offer some input here, even if they don't know the answer but can formulate an opinion. I know very little about these devices.
Thanks in advance guys!
PS - don't really know if I should start another thread, I've posted here as it seems like very much the same issue.

Anybody any idea? advice?

I had a similar problem with my HERM100. I didn't mess around with it too much, I just had Cingular replace it out of warranty exchange (thank god those original ROMs are on the wiki ). I did notice however that after doing a master reset, the screen would function again although I haven't messed around with it too much. I got so frustrated with removing the battery for 5 minutes and STILL powering on with a white screen that I just threw it in my back seat until the new one arrived.

I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.

Anyone anyone?

HELP!!!!
barncourt said:
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.
Click to expand...
Click to collapse
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem

CINGULAR IN JA said:
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike

In my case, they also are always lit up when the screen is also active.
And no matter what ROM version, they occasionally stop responding. Side buttons keep working.

mikechannon said:
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike
Click to expand...
Click to collapse
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?

CINGULAR IN JA said:
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?
Click to expand...
Click to collapse
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike

mikechannon said:
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike
Click to expand...
Click to collapse
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.

CINGULAR IN JA said:
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.
Click to expand...
Click to collapse
If it wouldn't be a software issue, why is it, in my case, instantly resolved when going to settings -> phone with the side buttons?

i had this problem i took it to a guy who fixed the problem he said it was a very small tear in the flex cable which causes this white screen every now ant then and the buton problem , sorry to say its the cable problem and u need a very capable person to fix it or replace it with a new one . its very common problem baised on the guy who fixed it .

dmxl said:
I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.
Click to expand...
Click to collapse
Exactly what is happening to me, no white screen issues, just screen taps and answering calls, I also have another problem where the PDA will not allow me to open anything, be it the start menu or contacts, it will open and quickly close again. I have had mine swapped through Telstra in Sydney, it worked fine for a while and then the same crap again. These problems started before I even touched the OS, so it must be a build problem. Maybe we should write a joint letter to HTC letting them know that there is a serious problem with their machine.

I have had the same problem, got my Tytn through work so we sent it back to the company that supplied it to us. Got it back yesterday and they had replaced the "switchboard". Not sure what it is but there was the problem. Had white screen and buttons not working.

Where to buy a motherboard / mainboard for TyTN

I've been experiencing the intermittent "No GSM" problem, and I'm pretty sure it's the mainboard (it started after I dropped the phone). Already opened the phone a few times / reflashed Radio etc...
Does somebody know where can I find a board for a HTC TyTN (Hermes 200) on the internet?
Thanks for the help!

i would be interested in this too

Maybe you could consider buying one with a cracked screen or so from eBay, just in case you can't figure out where to get a complete mainboard from...

Buying a broken one
MilchCow said:
Maybe you could consider buying one with a cracked screen or so from eBay, just in case you can't figure out where to get a complete mainboard from...
Click to expand...
Click to collapse
I've considered that, but than I have the risk of having a bad motherboard as well. I'd prefer to get a new one as a replacement part. I did that in the past with the D-PAD controller and had success with it. Can't find a motherboard anywhere thou... Any ideas? Help!!

Motherboard
Hey there.. I too want a new motherboard.. I dropped my 8525 and the speaker, left side of the keypad and SD card slot stopped functioning. I took off the cover and reconnected the speaker..even lifted the MB off..But still with the same problem except that the speaker works and that the Unit gets very hot near the SD slot...I surfed and surfed without any finds of a MB..
So any ways broke out the Wizard for awhile , dug deep down and just bought a Kaiser ( the real one from HTC ).....
So any else have any clue at all on how to get a Hermes MB?...

shmilson said:
I've been experiencing the intermittent "No GSM" problem, and I'm pretty sure it's the mainboard (it started after I dropped the phone). Already opened the phone a few times / reflashed Radio etc...
Does somebody know where can I find a board for a HTC TyTN (Hermes 200) on the internet?
Thanks for the help!
Click to expand...
Click to collapse
i'm iterested too

I am in a different position. I NOW HATE THESE UNITS LIKE POISON
I have three 8225s which I am getting really sick of constantly reflashing and finding out that something doesnt work, whatever it is.
Sometimes it is the whole screen going white eight times our of ten boots, sometimes NO GSM, sometimes it flashes properly and runs properly, starts up with all GSM numbers showing correctly and then goes into its configuration cycle only to end up with NO GSM on reboot or some kind of freeze.
I want to know where I can get rid of these things: I am in New York. Is the only place to try them on ebay? Might involve a considerable (not worthwhile) learning curve?
Has anyone had any luck contacting other flashers on craigslist? Or is there a place on this forum where I can get rid of them for a reasonable price?
I also have a few Wizards (as well as a working Wizard G4 main board) and a Blue Angel which has NEVER worked properly in the 4 years since I Have had it. However with persistence and playing around while doing other things (like watching TV), I DO have it finally working properly on all functions and have given it to my offspring. The sheer amount of playing around with it to get it working properly has convinced me that it definitely wont be worthwhile trying to get the Hermes' to work!

Oh and I forgot to mention.....
licensedtoquill said:
I have three 8225s which I am getting really sick of constantly reflashing and finding out that something doesnt work, whatever it is.
Sometimes it is the whole screen going white eight times our of ten boots, sometimes NO GSM, sometimes it flashes properly and runs properly, starts up with all GSM numbers showing correctly and then goes into its configuration cycle only to end up with NO GSM on reboot or some kind of freeze.
I want to know where I can get rid of these things: I am in New York. Is the only place to try them on ebay? Might involve a considerable (not worthwhile) learning curve?
Has anyone had any luck contacting other flashers on craigslist? Or is there a place on this forum where I can get rid of them for a reasonable price?
I also have a few Wizards (as well as a working Wizard G4 main board) and a Blue Angel which has NEVER worked properly in the 4 years since I Have had it. However with persistence and playing around while doing other things (like watching TV), I DO have it finally working properly on all functions and have given it to my offspring. The sheer amount of playing around with it to get it working properly has convinced me that it definitely wont be worthwhile trying to get the Hermes' to work!
In addition to all this, I use most regulatly a Wing. A few years ago I broke the screen and HTC sent me a new chassis for whatever reason. When I switched screens, the unit with the slightly broken screeen worked, it just had a chip like break at the top corner. I could still use it. Recently I put the battery back in and hey presto! it now doesnt work at all
So what happened to the working one? The battery pins on it stopped 'pinging' today, which I take to mean that the connections no longer work. The unit suddenly stopped working on putting the battery back in it.
So who needs a few Wing chassis as well??
Click to expand...
Click to collapse
Heading should be whole load of units, mostly working, to get shot of.

Touchscreen not responding, backup question

Hi all,
Looks like my Sprint Vogue is flaking out on me. The touchscreen is suddenly and without warning not working at all. Everything else works (all other buttons, activesync, all functions). I'd like to do a hard reset before giving up on it, but I'd really like to sync my contacts/messages/photos/etc before doing that. So here's the problem- I use Dashwire to sync, and I'm unable to hit the "SYNC NOW" button!
Any ideas on how to switch to and activate the bottom left and bottom right menu buttons without being able to touch them? For example, the Inbox and Menu buttons on the Mail app screen, or Album/Slideshow on the Photos and Videos screen? If I can get to those I'll be able to activate the sync. Any help would be great!
Thanks,
Bogus

There is a application called "MyMobiler" which allows you to control your phone over ip/usb/bluetooth. If i remember correctly launching the installer on your pc while your phone is connected to activesynch will install it without having to press anything.

Awesome, thank you. That did exactly what I needed it to!
Once it finishes sync'ing I'll give the reset a shot and see if the screen is really borked or not.

No problem glad i could help. If the touchscreen refuses to work you might wanna try replacing it. The part is called a digitzer and they go for 15-20 dollars online. I bought one and it wasn't difficult at all to replace.

Yeah, that's the plan. Hard reset didn't fix the problem, so I'm guessing that part is busted. Between this site and PPCG I found the guide for taking apart the phone, so it's looking like I'll be doing some minor surgery in a few days.

bogus83 said:
Yeah, that's the plan. Hard reset didn't fix the problem, so I'm guessing that part is busted. Between this site and PPCG I found the guide for taking apart the phone, so it's looking like I'll be doing some minor surgery in a few days.
Click to expand...
Click to collapse
How would the touch screen instantly not work?
maybe someone let it fall and put it back to normal like nothing happened
and i know what u mean.I dont wanna give up my vogue. EVER,
but im 15...by the time im 30, i wont remember what vogue is.LOL.

Actually, it seems to have developed a very small air bubble in the very upper left corner. I'm pretty sure that's causing the digitizer to think there's constant pressure in that area, evidenced by the "Start" menu occasionally activating when I turn on the phone. I ordered a new digitizer anyway- the set of torx screwdrivers I'd need to open the case cost the same as a new digitizer and the screwdriver I need. I don't really understand how the air bubble formed (or even what it is contained in), but one way or another I'll resolve the problem next week.
And I just turned 26- I'm sure by the time I'm 30 I'll be sporting a Touch Pro 4 running Windows Mobile 8.5

Well, the digitizer and tools came much faster than I'd anticipated (I won the auction on eBay on Friday, paid same day, and got it in the mail today, shipped from CA to NY!). So I dove right in. It was a straightforward affair- remove the four torx screws from the back under the cover, remove the speaker, pry open the front from the mainboard, disconnect the keypad circuit board from the mainboard and the digitizer from the keypad board, push out the old digitizer, swap in the new one and hook it all back up.
Not for the faint of heart to be sure, but for someone who likes to tinker it was a lot of fun. Took maybe 15 minutes because prying the case from the mainboard was difficult. More accurately, the top plastic case is extremely thin and fragile- if you do this you'll almost definitely crack it in at least one place. If not, you'll crack it pushing the digitizer out from behind. But I'm not that worried about cosmetics, I got my Vogue second-hand off-contract, refurbished, so it wasn't exactly mint to begin with.
On the plus side, the repair worked like a charm! I tested every touch feature I could think of and as many areas of the screen as I could, it actually seemed to respond better than when I initially got the phone. The odd part is I could still see the air bubble in the old screen, and couldn't flatten it out even by squeezing on both sides of it. I wish I knew how it formed so I could prevent it from happening again, but I'll just have to be careful.
So to anyone considering this project:
If you're worried about damaging the casing and have insurance or a warranty or something like that, take it to the phone company to get it repaired.
For anyone else, the $15 bucks for the screen and three tools is a lot cheaper than buying a new phone. Plus you get the geek cred for repairing your own phone.

Repaired HD2, now no signal, can't find any networks

Hiya, I've got a HD2 with a couple of problems.
My brother had it as contract upgrade from his iPhone 3G back in February, and it was fantastic for around a month. As he never needed the insurance on his iPhone, he didn't take it out on his HD2, and you know whats coming don't you? It fell from his pocket and cracked the screen pretty badly.
As he didn't want the hassle or expense of fixing it, he went back to the iPhone and left the HD2 in a drawer. I found it a couple of weeks ago and asked what he was doing with it, he said I could have it if I got it fixed. The digitiser was the only thing wrong with it, so I took it to a local phone repair shop. After a week away having the glass replaced, I picked it up today and have found a couple of problems.
1. The phone can't find any networks.
I know its locked to O2, but with my O2 SIM card in it, it won't find any networks (the signal strength icon is the phone mast with an exclamation mark). Manually or automatically searching doesn't make a difference.
2. The Volume buttons don't work
They don't seem to make any difference to sound levels when pressed, and they seem harder to press than they used to be.
Now, I think the second problem would be fixed with a simple take-apart-put-together job, but I'm more worried about the first problem. Why would the phone lose the ability to find a network? When the digitiser is replaced, does the antenna get removed? Could it be that it hasn't been reattached properly?

I'd take it back and get it fixed properly.

Found no networks: I don't know the Hardware of HTD2 explicitely in its assemling process so I can just guess:
For my Touch diamond I got the problem that the antennacable (a tiny internal coaxial cable) was unplugged. That may be the problem here, too if GSM-Antenna is softwired in HD2.
Or try a hardreset (probably reflashing)

to get to the screen you have to strip every last part of the hd2. hunt down the official assemble disassemble video.
your problems have all the hallmarks of assembly errors. an antenna cable gets tugged when you close the case, volume buttons get caught, etc etc
id take it back and have them look at it again.

samsamuel said:
to get to the screen you have to strip every last part of the hd2. hunt down the official assemble disassemble video.
your problems have all the hallmarks of assembly errors. an antenna cable gets tugged when you close the case, volume buttons get caught, etc etc
id take it back and have them look at it again.
Click to expand...
Click to collapse
I agree with that. And most likely they will do that for free as it was their fault (if its an assembly error)