Hi there, i have an magician and it had a reception problem.. i found a possible solution for it!.. what i exedantly discovered was that if you update your radio rom to 1.13.00. and put you sd card out your phone and turn it on you get greaat reception.. it worked with me so go ahead and try!
Related
Hello,
During the upgrading of my radio stack active sync went dead.
---> dead XDA 1
Bootloader seems OK but reports a GSM error and doesn't go any further.
Does anyone have a radio stack update I can use to flash from a SD card ?
great many thanks !
this happened to me also, i would be interested if you can repair it..
I have upgraded to WM2003SE ROM, and upgraded Radio ROM to A20.10. My device is PH10A. But when I insert a sim card, these always no GSM, I could not dial any phone call.
Could anyone tell me that I should flash which Radio ROM to my device? Thanks
problem connecting to any network after radio upgrade
Hi,
I am having the same problem connecting to any cell network on my phone. It is a Qtek 1020 PW10A1 Rom version 4.02.04 ENG.
The problem started after updating the Radio stack software. The signal icon always shows up as no signal, this happens on all networks. I have another 1020 with the same Rom version but a different radio version A33.02 that is working. I have tried to search for this version to download or a solution for this problem for a few days now with no luck and was wondering if any one could help?
I have come across many other radio versions that say they are compatible with this model but each produce the same result, no signal.
Thanks in advance
(PS this is my first post!)
Hi Shadow,
I also have a 1020 with RSU 33.02 installed. If I knew how to extract the RSU then I could upload it here. It could do with being on the FTP. I didn't find anything on the Wiki about it, wondering if anyone has any suggestions?
Regards,
Neil.
I’m new to this so this may be wrong but I have found out that if I go into the wallaby boot loader and push the contacts button I get these options:
CE ROM TO SD
BOOT TO SD
GSM ROM TO SD
CE+GSM TO SD
Is the “GSM ROM TO SD” option the one that’s needed to be able to get the RSU extracted or is this something completely different?
When I select it, it tells me to connect the rs232 and run pc monitor – two things I don’t have.
Shadow1
Anyone found RSU 33.02 rom yet? or have any sugestions on how i could fix my phone :?:
Thanks
Hi all,
I recently took out my sim card to replace it with a new one. However, when i placed the new one in and turned the BA on i recieved no signal, furthermore, when i put the passcode in, it said it was wrong. of course, I have punched in the right code i have always been using.
i have tired hard reseting but it still doesnt work.
Are there any other options avaliable apart from flashing a rom in again?
Any help or suggestion will be appriciated.
Kind regards,
Jason
some help would be appriciated
jasonchiu said:
Hi all,
I recently took out my sim card to replace it with a new one. However, when i placed the new one in and turned the BA on i recieved no signal, furthermore, when i put the passcode in, it said it was wrong. of course, I have punched in the right code i have always been using.
i have tired hard reseting but it still doesnt work.
Are there any other options avaliable apart from flashing a rom in again?
Any help or suggestion will be appriciated.
Kind regards,
Jason
Click to expand...
Click to collapse
These are both known glitches in the BA with WM6
For the no signal a soft-reset should fix it, for some reason if you remove the battery and then replace, the first boot has no radio initialization, but a soft-reset after that fixes it.
As for the passcode, you have to clean your hive file to regain access to the device. You do not need to format storage, but all your registry settings for installed software will be gone. Most likely a re-install of each app will be needed.
i just went through this..i tried changing my sim card and i was freaked when i saw no radio rom installed..then i upgraded to radio 1.15 and first it worked but again i t showed the same so i went into bootloader an then soft-reset and its working till then ( about 5 softresets till now)
cheers guys, will try that out.
Hello, i bought a new phone with a problem(the seller told me that speaker dont work, well this is not a problem i can use the external speaker), this is almost new, i discover that i cant init wifi and bluetooth.
I test installing 2 roms, WM6.1 official HTC and WM Amina (i think is the name). but i cant recover this functions.
When im on comms manager click on wifi or bluetooth and appears like thinking and few secs later its off.
I notify that when i reset my phone and open comms manager bluetooth is enabled but i think is not working only enable.
Anyone can help me to fix it?
im very worried about
Thanks,
Albert
Radio Version?
What Radio version are you using?
Rom: m-amine
Radio: 1.59.42.15
try flashing RADIO rom 1.59.42.23 and make a hardrest after each ROM flashing.
whats change when i install a new radio?
and how i can install only the radio?
I generally install the rom with radio inside, how to install only the radio?
Ok i install the radio .23 but nothing bt and wifi doenst work
changing Touch Cruise motherboard
Bonjour,
unfortunately I had the same problem and others like camera weird colors pictures etc.
And after radio roms testing hard reset and so and so, I had to give my telephone to the repair service (under garantee), they changed the motherboard and now it's OK.
I'am affraid your phone has the same problem if the radio rom flashing does not resolve your problem.
cyklix
Hi everyone, i hope i'll find an answer cause i can't understand what's going on with my HD2 !
So, my hd2 keep losing signal, at first i taught it was a radio related thing, so i flashed a 2.12 radio (was on 2.15.40), but the problem is still there. So i decided to change the rom, cause the problem showed up after i installed a android sense rom (this one) i installed i miui stable rom, and still have it.
Here, i decided that the problem maybe came from my sim card so tried my wife's sim card (same operator) and another sim card (different operator) and it worked just fine, no losing signal at all.
So I've changed my sim card with a new one and the problem still occurs!!!!
Decided to flash a windows phone 7 rom, (just to be sure) and problem still there.
I can't understand what's wrong, i have this problem just with my sim card !!! any help please
Try flashing a stock Windows Mobile ROM and see if you still have the problem.
ok i'll try that thank you. hope that will fix it
Hi there,
I have a dual boot system with stock WM6.5 and SD android.
When using the android OS i notice that the signal bars sometimes are lower than when using WM and i even get no bars at all.
I dont know if your problem has the same cause as mine, but try to flash the stock rom and check.
Worth a shot.
Regards
no my problem is a bit different. cause my sim card don't lose's signal on my phone. but work well on other phones. on the other hand, other sim card's work's well on my phone. So i have the problem with my sim card in my phone!!! that's what's driving me crazy.
By the way flashed a stock rom but it didn't solve my problem