Ok, I dont want to sound all noobish but I did check all the stickies for help before I resorted to this.
I was messing around with my phone and tried overclocking it from 247 to 273 and then the screen got all crazy.
After a few restarts and finally leaving it alone, BatteryStatus finally automatically disabled itself somehow. I thought it was safe to turn it back on but then the same thing happened and now it wont re-disable.
Does anyone know of any way of disabling BatteryStatus without being able to navigate through the phone menus(like via USB connection to a pc)? Or do I have to reinstall the original T-Mobile RUU all over again?
Thanks in advance
The same thing happened to my exgf's Wing when I gave her batterystatus on the Stock rom.
you may be able to use MY MOBILER www.mtux.com and control your phone from ur PC.
When installing it from the PC, hit the left softkey to make the install go thru on the phone... then it should connect automatically.
Related
OK, I did something dumb. I went in and activated OMAPClock via Smartskey without fully testing the limits of my MDA. I'm sure you know what's coming next... now my phone won't boot. It usually will get as far as painting the Today screen but it completely freezes at that point.
Other than a hard reset, is there any way that I can get my phone up and running? I'm thinking of something like safe mode on a Windows PC, where I can bypass the stuff in Startup. Or is there any other way to block Smartskey or OMAPClock from starting automatically? If there were some way to get at the config file for Smartskey I could fix it as well.
Thanks in advance...
The only way to get safe mode is if you already have a program installed that has that function. There are a few out there, one being pocket mechanic and I can't think of what the others are off hand but if google for ppc safe mode you'll find them. Unfortunately if you don't have one of them already installed you're most likely in for a hard reset. I don't exactly trust safe mode on my wizard anyway, the one time I tried it out it wouldn't come out of it. It just kept rebooting in safe mode after that and I ended up doing a hard reset anyway.
As far as i know hard reset is your option. but thats me saying
I myself had this problem when i first started to use my phone and i found out that there is no safe mode but there is programs that have this option
Edit: xeno1 beat me to it
HR and recosider using safemode tool.....
Hi all, first time poster long time browser I checked the wiki and did a search but couldn't find a similar post. Here goes..
Yesterday i tried to connect to this protected wifi at a coffeeshop, but my HD did not manage to connect even after entering the network password. In the end it froze. The home screen was showing, i could feel the vib when pressing the screen, but no action happened. I did a soft reset, but that didnt make a difference... nothing working still, while it is still trying to connect to wifi.
Then I first did one hard reset. I managed to get to the screen where i am asked to touch the screen in order to configure the device. While i could feel the vib, nothing happened. I did a second hard reset, ended up at the same screen, but this time there is no vib when pressing the screen... and still nothing is happening. Same situation when doing a third hard reset.
I am lost for ideas.... Have anyone of you ever experienced something similar and what did you do to resolve it? Or have anyone any suggestions as to what I should try next??
Very bad dude,
what you can do (i dont know if this will work).....Flash your original rom again. it is a kind of a hard reset, but maybe this will work.
can you boot to boatloader (three color screen), and see the text USB when connected to pc?
Hi Kadir,
thanks for your answer.
I am trying to flash my rom using the excellent tool Hard-SPL package from OliNex, but to no avail.... i keep getting error message 202 meaning that it can't connect with the device...
This may sound obvious, but just in case... have you tried to remove the battery when the device is turned off? Is the only way to ensure you are fully turning it off, in case you have some kind of 'static' acting up. I had a similar issue on a PDA and also in my notebook, and was solved by removing battery.
hi,
thanks for the advice. I wish this was all it took, but alas no, i am not that lucky. I am starting to think this is a hardware issue....
can you see the 3 color screen?(when phone is off push power on + volume down button and keep volume down pushed).
if yes can you see it you are now in the bootloader. just chech if you see text usb, this means its connected.
and then flash, no 202 anymore.
do not use hard spl if you want HTC to repair your phone(warranty issue)
Don't you have to disable USB connection in ActiveSync too? Or was that just me?
I found the Flash program killed active sync anyway, but you're right all the guides say to disable it.
Hi Guys,
My touch screen and LCD screen NOt working! Phone Switches ON and comes to standby mode. (i hear all the booting dings and dong melodies)
I neeed to take a backup of my device. to do so i thought i'll use my mobiler and see the phone screen through the PC! unfortunately the last time i used i used the phone as the 'storage device' option. so every time i connec the phone to the pc windows open up my phone's storage card.
Is there a possibility i can change this back to active sync without using the phone's screen.
Or are there any other suggestions for me to take a full backup??
This might be overly complicated but all I can think of at the moment is to write a mortscript or something similar, stick on on your SD card and create an autorun on the card to run the script when it's inserted. The script could change the registry key associated with activesync/usb storage when the device is connected.
Yagetme?
You might be able to get it to work if you do a hard reset or perhaps flash another rom, as if I remember correctly, the default connection setting is set to Activesync.
However, if you're planning to solve the touchscreen, LCD problem, try to flash another rom. If that doesn't work, maybe it's a ribbon connection problem? I had a problem similar to this on my Diamond.
well, atm i see alot of ppl haveing problem with the display, dunno why this happens but it does.
my display turns black sometimes, to get it back working i turn out the battery for 10 seks, put it in again, and try to turn device on till it works. i will bring it to the service.
a hardreset won't help u, because ur data will be lost after hard reset.
Hello.
First post here and hoping someone out there has a solution for my issue.
My HD2 gets stuck on the "quietly brilliant" screen every time I try to boot it. The only thing which happened directly before was that the battery was low and it switched off. This has happened before, but usually when I plug it in to charge it can just turn back on, or if not plugged in then tries to turn on but turns off again. The amber light comes on when it's plugged in to the charger, and it has been charged for enough time that it should turn on as normal.
I'm not as tech-minded as most of you so I'm kinda fumbling around trying to make something work.
I have tried:
Soft reset (multiple times, at different points in the loading (ie when it has the red writing bottom left before freezing, during "quietly brilliant" animation, and after freezing.
Turning on with memory card out.
Turning on with sim card out.
Turning on while plugged into charger.
Turning on when plugged into usb.
The phone will not:
Boot fully
register when plugged into PC
But it will enter bootloader mode (did I get the right terminology? With the Colour banding?)
When in this mode it either displays "Serial" or "USB" (if connected to PC)
I'm desperately trying to avoid a hard-reset as I've spent quite a long time manually entering contacts etc which aren't backed up (all would be lost ) and getting twitter/youtube/facebook all that jazz set up, along with programs and BSB tweaks, Dutty's task manager etc etc set up.
Have also spent time changing the theme with HDWall, and removing curtains/backgrounds etc with the TOUCH X tweaks. I've finally got my phone just how I want it...the biggest thing, of course is losing all of my contacts though.
I just have a HTC rom installed (can't remember what it was called, but nothing fancy, just the normal one to replace my TMobile rom).
Would really appreciate some advice/insight into what is going on and what I can do to sort it. Please help!
N
p.s. yes, I realise it was very stupid to not back up contacts...really really stupid. That will be the first thing I do once this is sorted!!
Oh and it won't turn off using the hang-up button when it's frozen-I have to remove the battery.
nudilover said:
p.s. yes, I realise it was very stupid to not back up contacts...really really stupid. That will be the first thing I do once this is sorted!!
Click to expand...
Click to collapse
If you use Exchange, all your contacts are stored in Exchange...which has the immediate benefit of backing them up, and the other benefit of making them sync with Outlook/OWA.
>: /
Hi there,
Thank you for your reply, I'll bear that in mind next time. But for now - how would I be able to check this? I'm really not sure if I set this up. Can I check it on my PC? I have Office 2007.
N
Ok...so I've found some of my contacts in my Outlook. Guess they weren't updated very recently but at least some are there. I can do a hard reset if I MUST...but please does anyone know of anything else I can try?
And if I leave it overnight is it best to leave it frozen/switched off/charging/battery out?
Will head off to bed soon as it's nearly midnight here and I've got work tomorrow.
N
Try to flash with another radio, you donĀ“t miss your contacts if you do.
Some roms block with some radios.
hope it solves your problem
Ok, I'm going to try it. Found the old .nbh file and it was the 1.66 rom. So just trying to find the right radio one now. Thank you for the tip
Have tried 2 different Radio versions now and still sticks on the same screen on satrtup...is it hard reset time?
Feel like I'm speaking to myself here!! Ah well!...an update. DId a hard reset, and my lovely HD2 is alive and well (albeit looking far too "fresh out of the box"). While I'm at it with nothing back...is there a "better" standard ROM than 1.66 to be using? Anything newer? I'm never sure about these things.
Thanks for your patience and consideration guys...I'm a bit of a noob girl when it comes to these things!
Sound like you've installed a customized ROM. If its the case try to find out what is the best Radio for that ROM and re-install it.
Active-sync , Data-connect Screen has disappeared when I plug in the phone. I have been trying to search on the forums for something related to this but I cant find anything. I just need to switch back to active-sync so I can flash a new ROM. Thanks for the help
syphen6 said:
Active-sync , Data-connect Screen has disappeared when I plug in the phone. I have been trying to search on the forums for something related to this but I cant find anything. I just need to switch back to active-sync so I can flash a new ROM. Thanks for the help
Click to expand...
Click to collapse
Hi syphen.
First, I would just try unplugging it and plugging it back in, if you haven't done that already. Every now and then the option doesn't appear for me until I do that.
If that doesn't work, go to your settings tab and pick "other" (down near the bottom of the list, you may have to scroll to get to it), and then "USB to PC", you'll then see the checkbox that turns that option on/off.
Sweet that worked thanks very much