hey just wondering if anyone on here knows where i could purchase the keypad ribbon for the tmobile wing, its located directly under the keypad and i put a cut in mine when trying to change out the housing, ive searched online with no luck?
That blows.
Try contacting HTC? and ask for the P4351 Atlas
I have Wing Parts
i have parts for the Wing..i have a Keybard with the Ribbon...i have a whole motherboard for the wing, and i have the faceplate with buttons, and a LCD screen with the touch screen thing with it. All parts are for sale...Hit me up on [email protected] im located in Queens, NYC
Related
I was wondering if anyone could direct me to a site or page that sells parts for the ppc or xv6700. I have one, and I need to replace the scroll button on the front. That toggle thing on the front no longer clicks in. It goes left right, up and down but no longer clicks in.
just wondering if anyone knew where I could get a replacement other than buying a phone with a broken LCD off ebay or something.
thanks
Unfortunately that's the only thing I know of. But I also haven't looked.
parts for the 6700
i have parts for it if you want
Hello there, with placing my keyboard part in a new housing i damaged the flexible circuit of it, now some keys dont work anymore.
I was looking everywhere to buy a broken herald or wing so i can take the keyboard from that one. I cant find the keyboard circuit as a part on ebay or webstores.
Maybe anyone on this board has a herald with broken lcd or defect hardware except the keyboard hardware?
Any help or suggestions will be appreciated!
I'll describe everything from scratch so you'll know what the problem is. So, I had 2 MDA Vario II, both developed a fault (on one when I pressed the button on na hardware keyboard it showed two letters on the screen instead, on the other the backlight under a couple of letters stopped working) so I dissasembled them and out of two faulty, I had one working and one working so-so.
As I wanted the other one to be sorted (the connector to the hardware keyboard was burned in some places on the mainboard and the keyboard tape connector as well), I was shopping for some faulty ones on eBay and yesterday I bought an original TyTN with LCD screen not working. I dissasembled both of them and connected the full LCD fascia with the screen to the mainboard of the TyTN (so that now I've got the LCD housing from T-Mobile, but the rest from HTC) and everything is working perfectly... however I'd like to use TyTN only housing and possibly buy a new one on eBay (but keys on the bottom are different for Vario II and TyTN).
I do know that LCD screens are incompatible, in the TyTN I have the HITACHI and in Vario I got the TOPPOLI (however the whole thing works with the mainboard, as both of them have the same product codes)...
But does someone know if I put the whole LCD from the Vario including the tape and top buttons in the fascia of the TyTN and connect it to the bottom buttons circuit, it will actually work. I will do it anyway, but if someone was doing it in the past that would motivate me to fiddle with it tomorrow
Sorted.
For all those with NOT working LCD screens/keyboards/mainboards...
As I the LCD screens are not compatible and we often do not know what we are going to get off eBay, lots of people face the problem of buying something that may not work with their version.
I needed the mainboard and the keyboard in my Vario II (HERM300) and I bought HTC TyTN (the original one, HERM200) with not working LCD (backlight working but nothing could be seen on the screen). As you may be aware that TyTN has got an extra button for 3G and Vario II not, I was wondering whether the whole thing would work. I replaced the full LCD screen with the tape including the two top buttons and connected it to the bottom circuit of the original TyTN. After assembling everything back, I switched it on and it's working without any problems. So if you have the same problem and can get hold of a cheap Hermes for spares on eBay, as long as you replace the whole lcd with tape it'll work regardless of your version...
Useful info thanks. That question was asked before and I don't think anyone gave an answer. Good to know it will work despite the different button layout.
cheers
Mike
Hello. How do I get the keyboard mebrane off the housing? Also, do I need to glue the keyboard back on? I'm trying to change the housing on the wing.
So i bought a used HD2 so i could get rid of my Aria and do a dual boot
The digitizer was bad so i bought that as well as a new screen, replacing it the main flex ribbon that connects to volume port broke which is unrepairable and the pcb where the flex connects to the socket lid broke half way when removing the tape so dang fragile.
But the ribbon still goes in and it still closes, so the main issue is the flex ribbon with the broken volume button.
So my tech is an idiot. But i really want to use the HD2. Is there somebody that has those parts and can fix it?
I already spent $65 on the digi and screen so i feel
Yes go onto ebay and look for hd2 side volume key pcb.
It's a lengthy repair but nothing too difficult if you like electronics.
http://www.ebay.com/itm/New-OEM-HTC...ultDomain_0&hash=item1c21fcc331#ht_1766wt_964
found it, should have some fun now