Prophet (m600) No bootloader / Switch on - JAMin, XDA Neo, S200 General

Hi,
Anyone got any ideas on this one?
My prophet will not switch on, go in to bootloader or get recognised on a PC with USB connection.
The only life in the phone is when connected to a charger, the red light at the top comes on.
Have tried Hard resets/ new battery etc but still no luck.
Couldn't find anything on forum to help. Very stuck.

if you leave the charger on long enough, does the red light turn to green i.e. fully charged? i'm sure you've tried to switch it on while charged?

Hi,
Yeah light turns green after a few hours but still no turn on or bootloader.
The other thing is the red light stays on when the battery has been removed. Is this normal? Never noticed it before.

Sussed it....
Ended up opening the case. with the case off, the light went orange and screen light up. Case back on, red light and no screen.
Turns out the mainboard was shorting out on the back of the lcd screen. Bit of parcel tape sorted the problem.

Related

Notification LED red.....MDA dead

Help....seems that my Magician is dead....making a long phone call (1 h) after call end, display switch off and Notification led become fix Blue (bluethoot was off) and then i try to hard reset. Led switch off and no results. I try then to put the power supply cable and the led become RED.... !!! (neve seen red.....) pda is not switching on anymore...any details on the reason of this RED light ???....please.....
thanks in advance
Red LED means the battery isn't connected or the device can't charge.
Try taking the battery out for a few hours and try to switch the device on again.
My brother in-law had the red LED issue too, we solved it by 'kick starting' the battery with two wires and a 9v battery. (At your own risk of course).
Good luck!
helterskelter said:
Red LED means the battery isn't connected or the device can't charge.
Try taking the battery out for a few hours and try to switch the device on again.
My brother in-law had the red LED issue too, we solved it by 'kick starting' the battery with two wires and a 9v battery. (At your own risk of course).
Good luck!
Click to expand...
Click to collapse
Red Led doesn't mean that the battery is not connect with the device. It simply means the cover is not properly intact. Try taking out the battery off the device, put it back in the slot. Place the cover carefully and completely. And then connect the device to AC power supply. It would definitely come *alive*
still dead....grrrr
so cover is ok...it seems to be properly fixed, even the smal swithch that create some unwanted crash few months ago is now working properly...
i made a 1 h long phone call with battery and charger (usb from pc) and after line felt down, bluetooth led blue on (was off) and screen with phone but no changement by touching it. so switch off by power off and ...dead...now without battery but with charger (or usb from PC) RED led on. With batttery AND charger RED on, and with battery all dead. i cannot reset anyhow with or without battery /charger....need it...sh*t.....(ops...sorry)
thanks a lot anyway....
omino_ribelle said:
so cover is ok...it seems to be properly fixed, even the smal swithch that create some unwanted crash few months ago is now working properly...
i made a 1 h long phone call with battery and charger (usb from pc) and after line felt down, bluetooth led blue on (was off) and screen with phone but no changement by touching it. so switch off by power off and ...dead...now without battery but with charger (or usb from PC) RED led on. With batttery AND charger RED on, and with battery all dead. i cannot reset anyhow with or without battery /charger....need it...sh*t.....(ops...sorry)
thanks a lot anyway....
Click to expand...
Click to collapse
what I will suggest is, you should get a new battery instead!!
Got the same problem now!
Both my wife and me got a Magician. Hers is dead now - same symptoms.
First guess was dead battery as well. But I exchanged it with mine fully loaded. No difference!
Usually when you plug the powercord into the device orange flashes up and device boots. Here nothing happens.
I'll have some electrician have a look at both. Maybe he can find the fault by comparison. But I don't expect a lucky outcome.
on back side of ur device when u remove the battery cover, u see a small black switch on the right side just next to the battery.
put the device on charge..with cover off---it will show red light contunuously on.
now manually press gently that black switch and see if ur device starts to charge.
if u see a yellow light any point of time doing this u may have to get this little switch repaired or do a temporary work urself by kepping it at place manually bu something.
try and tell
Now it works!
I think we all knew about that little switch. But thanks for your thoughts.
Anyway, hers is running again!
Two days ago I took it fully apart. No obvious fault noticeable. I left it the way it was now to prepare it for shipping. Today my wife asked me I should try it just once again. So I held the battery on the connector and plugged the USB cable and then: it booted!
But the internal battery doesn't seem to recover. It stays at 0% (1h "charging" since then).
I have to correct myself: Even the internal battery is charging (but it takes its time).
my magician is also dead and just the red LED is burning when i put it in the USB! Can anybody help me?
Still ned solution!
Can some one who was having the same problem help?
your device battery detector switch(little switch) is broken or logged-out of Main Board.
when it broken,the red LED is on at all.
it is the greatest weakness of magician...
z_qz54 said:
your device battery detector switch(little switch) is broken or logged-out of Main Board.
when it broken,the red LED is on at all.
it is the greatest weakness of magician...
Click to expand...
Click to collapse
i am opening my jam case,bring the switch out and conecting sides of switch by a piece of wire.now a day there no problem with openning the battery case or.. but my WM cant recognize the battery level.it's alway 0%.and even the charger is connected no orange led i can see.but the charger charge the battery and battery works for more than one day!!!!!!!!
any one with the same problem!????
or any one having solution!
REGARDS
I'm gettingn red led light too when charging from wall outlet. Charging from usb is fine. a weird thing is when my battery came down to 50%, imate jam will shut down and won't successfully reboot. some people from this form mentioned it's an indicator that the battery is dying.

Not starting up + flashing red led while charging.

Connected the u8800 to the pc overnight for charging, today the phone will not turn on.
Charging it just results in the red led flashing, tried removing the battery but that did not help.
Anyone else had this?
mangoman said:
Connected the u8800 to the pc overnight for charging, today the phone will not turn on.
Charging it just results in the red led flashing, tried removing the battery but that did not help.
Anyone else had this?
Click to expand...
Click to collapse
Sounds like broken battery... can you boot at pink screen? plug the phone to the PC without battery and try volume up + volume down + power.
ok, it starts without a battery.
Lucky for me i have 3 huawei 3g routers, two of them not even opened. They use the same battery as the phone, hb4f1.
The battery was completely dead, so going to ask for a new one.
Hi, i have the same problem i connect my phone into power and the red led blinks,except that that mine had get into see water...I try to get into pink screen but it is not responding.Also i have disassembly the phone and clean it from the water inside.Is there any fix?Will it be some component broken from the water?Any help will be appreciate.Thank you

Not the standard Red LED of Death.

So my phone is doing quite a weird thing. Let me go from the start.
I was waiting to finish a TV Show to check my voicemail, but every minute or so my phone would buzz, but wouldn't show any notifications. So when the show finished, I went to check the voicemail, but the phone was out of batteries. No problem, it was at 4 percent last time I looked, it must have just gone through that last bit of battery quick, maybe it had to do with the weird vibrating. So I plugged it in and went to the bathroom.
When I came back, it was charging with the red LED on iirc. I pressed the power button and the big battery icon came up and showed it was charging, so I held down the power button to turn it on and went to the kitchen while it booted up. When I came back though, it wasn't booted up, and the red LED was flashing.
This is the weird part though. All those red LED of death threads say the LED was flashing on and off, red to black. Mine is flashing red to red. Like a bright red to a slightly dimmer red. If I hold down the power button for a while, it starts flashing on and off red, but faster than I've seen it before, like when the battery gets completely discharged.
Does anyone know what is going on?
TL;DR: My phone is flashing a bright red to dim red LED while it's plugged in, instead of the normal on-off red led. It won't turn on. Help!!
How long have you had it charging? And is it charging though a wall charger or usb?
If it's been over two hours, have you tried turning the phone on when unplugged?
kpjimmy said:
How long have you had it charging? And is it charging though a wall charger or usb?
If it's been over two hours, have you tried turning the phone on when unplugged?
Click to expand...
Click to collapse
Yeah, eventually after a whole bunch of different combinations I was able to turn the phone on and get it charged up ok. Thanks!

LED under top grill won't turn off even when powered off

I had my phone in my pocket the whole day at work and when I went to check my phone I had noticed that the LED was turned on even though I had no notifications. Even when powered off it's still on. I had opened up the back case to disconnect and reconnect the battery hoping that maybe that would help but to no avail. I currently have my phone opened up with the screen unattached and the board connected to the battery and I can see that the LED is right on the board. Should I just break it or chip it off? Has anyone had this problem before and solved it? Thanks in advanced

Won't switch on, or off...

Hi all. my Samsung S7 Edge was working fine albeit a bit sluggish at times but it was okay. I was down to 14% charge and so connected it to its Samsung charger with a non stock cable which is its usual charging process. It was otherwise okay and the screen went off so it was completely black, the red charging LED came on and I left it like that for a little while. It is still in that precise state and no sequence of button pressing for any amount of time gets any response at all. Nothing, no vibrate, no charging indicator, no flicker - absolutely nothing changing. Red LED and blank screen, no response. I would like to discharge the battery asap and have clamped the Vol- and on/off button pressed for 20 minutes and it is not connected to anything. It is not rooted and there is no response if I connect it to a computer. Is it bricked? How can a phone 'brick' while working as it should?
So I removed the back, disconnected the battery for a minute or so and reconnected it. The red light had gone off and now nothing, no light at all and it is connected to the charger with the Samsung cable. I have tried a different charger - my laptop. I happen to have an unused battery I was going to replace this one with so I have now also tried another battery. The phone is just dead and no response at all so I guess there is only one option - bin it!
Well I happened to have a smashed S7 Edge so a working motherboard which I replaced and obviously cured it. Restoring as much as I can remember but can anyone still suggest anything I can do that may kick start this motherboard?
The same happened with my S7 Edge, yesterday. Just a blinking blue led and I couldn't turn it on. So I waited till the battery was empty and tried to recharge it. No red led no button combos are working, nothing. The phone is dead.
Was there an update?

Categories

Resources