Sometimes on my wing, the ringer will stop working... I check the volume and it's maxed out and just doesnt ring. Anyone else experience this? And is there any kind of fix for this issue?
are your ringtones stored on the SD card? Maybe you should move them to main memory...
well this happens when I was using the default ringtones too. so i don't think thats the issue. only way i get sound back is if i reset it but it gets annoying...
I have this problem too. Everything works fine after a hard reset for a while but then I can't get it to ring, vibrate yes, but no ring.
Yep same here.
Related
I have a problem: when I put my mda on "loud" the phone doens't make sound when someone calls me. Only the light goes on. In the settings "Ring type" is vibrate and ring, but still no sound. Tried also just ring but nothing happened, only light goes on. Even tried different ringtones, but that's not helping either. I have the WM5SE rom, but don't think that the rom gives me this problem, because I had this on other roms also, like the NBD series. When I first install the rom, everything is working fine, but after a few weeks it starts giving me this problems. I switch a lot between ring and vibrate, could this be the problem? Does anybody please no how to fix this?? Ferreira maybe you have some experience with this? Anyway I hope someone can help me, because I missed a lot of calls because of this problem.
Thanks in advance.
Check your radio version. I think the best is 2.19
And when you said it doesnt ring, does it vibrate (i.e. does the phone knows it has call comming in, and do something to respond to it).. or just a speaker problem?
Try hard reset. If it doesnt work then it may be an issue of headphones slot jam.
hanmin said:
Check your radio version. I think the best is 2.19
And when you said it doesnt ring, does it vibrate (i.e. does the phone knows it has call comming in, and do something to respond to it).. or just a speaker problem?
Click to expand...
Click to collapse
I have radio 2.69.11, ring type is "vibrate and ring". It does vibrate, but it doesn't ring. You know what the problem is?
LucaBrasi85 said:
I have radio 2.69.11, ring type is "vibrate and ring". It does vibrate, but it doesn't ring. You know what the problem is?
Click to expand...
Click to collapse
It is probably (as vlodeck mentioned) headphone jack jammed. If thats the case, you should not be having any sound from the phone at all (i.e. no music, no notification sound, no SMS sound). I had this problem before, and I do not want to make this sound dirty, but you can fix the problem by poking it Poke your headphone in and out in and out
hanmin said:
It is probably (as vlodeck mentioned) headphone jack jammed. If thats the case, you should not be having any sound from the phone at all (i.e. no music, no notification sound, no SMS sound). I had this problem before, and I do not want to make this sound dirty, but you can fix the problem by poking it Poke your headphone in and out in and out
Click to expand...
Click to collapse
headphone works, music works also, even without headphone, so that's not it. I tried flashed radio 2.19.11 T-Mobile NL. No I just have to find someone who can call me to test it. will post the result.
hmm.. that is iiiinnnnnttttteeerreeessstting. from what it seems, chances are probably the ring tone you are using is somewhat, not compatible. Tryign changing it to a default ring tone, WAV, shorter one, that is not in the storage card.
hanmin said:
hmm.. that is iiiinnnnnttttteeerreeessstting. from what it seems, chances are probably the ring tone you are using is somewhat, not compatible. Tryign changing it to a default ring tone, WAV, shorter one, that is not in the storage card.
Click to expand...
Click to collapse
I tried this also, it didn't work. I think I'm going crazy. If I change the ringtone and test it by pressing "play", then it works! But if someone calls me, I can only see that someone is calling, but I hear nothing! And if it's on "vibrate and ring", then it vibrates but doesn't ring! Isn't this crazy??
this may sound crazy, but just to check, is your volumn up? push your volumn slider up? make sure both the volumn controls are up.
hanmin said:
this may sound crazy, but just to check, is your volumn up? push your volumn slider up? make sure both the volumn controls are up.
Click to expand...
Click to collapse
I found the problem! thanks to you of course. I did this before but now I no the volume slider is broken. only the right volume was up and the left was all the way down. So that caused the phone not ringing. Anyway, I just have to do this with my finger/stylus in the future, so thank you for your help!
CASE CLOSED.
Its interesting but in WM5 i had all sorts of problems once where my music would not play at all. I had all the volumes turned up and all that and it still wouldnt play, then I turned the volume on Windows Media Player down to 95% and it started playing again, and i turned it back up to 100% and it was fine. Little minor glitch me thinks
Ever since I purchased my HD2 (Telstra) in February, I have had a problem where the ring volume intermittently switches off and I cannot hear incoming calls. At some stage after with no attempted fix, another call comes through and the phone rings fine at the volume I have set. The problem doesn't seem to be attached to certain callers, it seems to do it at times no matter who calls.
The phone actually rings (albiet silently) when the problem occurs as I see the phone go to the incoming caller screen, but there is no ring volume. When I check the volume of the ring tone on the phone after the call it is still set to a bit under half way.
I have the original Telstra ROM installed. haven't tried the new one yet.
Has anyone else had this issue and found a solution? I don't want to go to all of the effort to reinstall everything just to find out that the problem still occurs.
Thanks.
Same here!
I have the US version but have had this issue with both the stock US rom as well as the offical update they just posted.
A soft reset fixes it, but its totally random and is a major pain in the ass.
Any tips? Please help!
i have the same exact problem with my leo.
does someone have a resolution for this?
Me too!
Glad to know it's not just my HD2 that has this issue. I run the UK stock ROM and have suffered with this since I first got the phone! Most of the time it's fine, just every now and again goes quiet and I miss a call... I have even had the ringtone start loud, and then fade out. Would love to know if there is a fix for this......
Hi boys,
i've a similar issue with my Acer S200 with Manila ROM (OS version 5.2.23123, Manila version 2.5.20153712.0).
In a randomic way, suddenly the ringtone volume goes zero. I have usually ringtone+vibration, and vibration disappear too, together with ringtone....!
So with a new call, i can see the "incoming call" sceen but no sound and no vibration alert me...
With a soft reset i can solve, but i cannot understand what is the condition that triggers this problem....
I have a disimilar issue, the sound of the HTC HD2 phone call keypad is too loud, anyway to silence it?
it is not problem go to sound settings and close quiet ring on pickup
feyisetan said:
I have a disimilar issue, the sound of the HTC HD2 phone call keypad is too loud, anyway to silence it?
Click to expand...
Click to collapse
go to settings , personal , phone, keypad ,and close it
hoss_n2 said:
it is not problem go to sound settings and close quiet ring on pickup
Click to expand...
Click to collapse
not active.
The problem sound like a bug, instead.
andremales said:
not active.
The problem sound like a bug, instead.
Click to expand...
Click to collapse
mine don't have this
Erm.. try this
Settings > Sound & Display > look for "Single Volume" and turn it OFF.
whenever I press the volume key it has the option to switch between System & Ring Volume Level.
Hope it helps!
nothing helped.. performed a hard reset, now the problem is gone
No ring volume
try this: HKLM\Software\HTC\VolumeOverlay --> Set "Default Page" to 0
It works on my T-Mobile hd2
gutchin said:
try this: HKLM\Software\HTC\VolumeOverlay --> Set "Default Page" to 0
It works on my T-Mobile hd2
Click to expand...
Click to collapse
Thanks, will try that. hope it helps
i will, thanks!
.mp3 extention causes the problem.
try .wma format, it should solve the problem
best solition
What is the best solution for this problem?? Change the REG Key or. Change .mp3 to .wma???
When i receive an sms, sometimes, it will vibrate when i'm on vibrate mode. sometimes it will ring when i'm on normal mode. so there are times when it wont vibrate or ring. and also, the LED notification onli works when i switch off standby mode. whats up with that? is there a way to fix these bugs?
Not at the moment. I too am hoping for a fix, but SE have not announced anything else since MR2 so I think thats it unless someone who is a good coder or good with reg editing can figure out how to do it
bob2k4 said:
Not at the moment. I too am hoping for a fix, but SE have not announced anything else since MR2 so I think thats it unless someone who is a good coder or good with reg editing can figure out how to do it
Click to expand...
Click to collapse
The only thing I did was to use short sms ringtone
so everytime I get sms I hear the sound.
i tried that but doesnt always work when in vibrate mode. it will just randomly stop vibrating when a text is recieved. have to soft reset to get it working again.
huh. man. it still has loads of problems. theres also the video playback. anybody getting the issue? it doesnt run smoothly.
Hi @ all.
I have problems with ringtone on off in 5.1.1 roms.
When I use vibration mode or mute for a time I can't switch
Back to ringtone on.
I can't move the fader to regulate the loudness.
It stucks on the left side and nothing happen.
I must reboot my phone to fix it.
Someone has an idea why?
I use ringtones from zedge app. Maybe there is the problem?
Does anybody face this bug" notification sound automatically go into the vibration mode,restart to get everything back to normal"??i tried cear partition cache but didn't help this method..help plz
I also have the same issue. In my case, notification sound or ring comes from earpiece speaker instead of main speaker so it's too low to be heard. Not sure about the root cause. Reboot definitely helps but quick way to fix it is to call any number(like 111) and hang up after putting it on speaker. Is anyone else facing the same issue?
I can confirm that notification/call ringtone goes silent automatically in v323 also. DND is not activated and no power saving module/mod is enabled. This is an annoying bug and frequently causes me to miss important calls and notifications
Same here.
I solved my problem this way..i dont know if it will work for you friends..
Step 1 download the zedge app from playstore
Step 2 download the htc reactive notification tone
Step 3 set it via phone setting but select zedge app
I dont have the call ringtone problem i set "RING 1"
check it guys ..and tell me if it is working or not?
Thanks. sorry for bad english!
Sayan Duary said:
I solved my problem this way..i dont know if it will work for you friends..
Step 1 download the zedge app from playstore
Step 2 download the htc reactive notification tone
Step 3 set it via phone setting but select zedge app
I dont have the call ringtone problem i set "RING 1"
check it guys ..and tell me if it is working or not?
Thanks. sorry for bad english!
Click to expand...
Click to collapse
Didn't work for me. Do you guys have any smartwatch connected via Bluetooth? I do and may be it is the root cause of this issue?
I think this issue definitely has something to do with Samsung gear S3. Whenever I turn off and back on the Bluetooth, issue appears to be gone for few hours.
Guys i think the new 326 update fixed this issue..whats say?
I still have this issue but it's not so frequent now. It comes back in 2-3 days after reboot.
Issue is there. Randomly no notification. 326
Sayan Duary said:
Does anybody face this bug" notification sound automatically go into the vibration mode,restart to get everything back to normal"??i tried cear partition cache but didn't help this method..help plz
Click to expand...
Click to collapse
I experience it too. But in my case, I don't have to restart the phone, only turn it back to ring mode works to fix it although only temporarily.
It happens randomly, if I'm not using my phone for about 15 minutes, not always happen but randomly, occasionally happen.
I don't have any smartwatch apps or alike installed, but I'll check for other apps that might causing it.
I wish whether it's a bug from Asus or mistake from my side, it can be fixed somehow, because it's annoying.
Still looking for the solution.
=========
UPDATE: SOLVED (A long ago actually, sorry I just write this now)
An app caused it. It has to do with timer and notification sound triggering at some preset times a day.
After I uninstall the app, all is OK.
Hey guys, I am too facing the issue. But root cause seems to be this.. When I open any app that gives some audio output, n I immediately try to reduce the volume. Somehow the ringer volume also goes down along with media. N after this whenever I press the volume rocker, it doesn't work on ringer volume but on media volume. Once I restart it works fine but same thing repeats if I do what I mentioned.
Hi guys anyone experience after the update or Android become Android 8.0 my phone do not have signal anymore