The Wizard unlocker is not workinf for Qtek S200, anyone know why? and how we can do it?
what error?
did you try to run the enablerapi.cab first on your device (file is in the other post)
why Lokiwizb can not unlock my Qtek S200,
IPL:2.09
SPL:2.09
OS:2.9.7.24
ERROR: ITWriteDisk - An internal error occurred.
the same error on the XDA Neo !!! (german rom, IPL/SPL 2.09)
**** !!!
seems cannot unlock the device with SPL 2.XX.....!!!
and also the ROMUpdateUtility_Wizard_NoID.exe also not working on it!!!!!
Same here (I pretty mad about this!) :twisted:
OS: 2.9.7.24 WWE
Why couldn't HTC leave it open? Just stuck with extrom2 options... although I can´t seem to write/replace anything in there!
G.
i have same problem
I`ve trying to unlock CID,but have same problem like you,somebody help?
Same problems for me to. Anybody nows about a fix for this problem??
Just having registered in this forum, what are the chances that new ROMs can be loaded onto this device? I'm trying to decide between the s200 and the Jamin. Given the track record af as other devices are concerned, it would seem that it may be likely. But, just thought I'd throw out the question....
floepie said:
Just having registered in this forum, what are the chances that new ROMs can be loaded onto this device? I'm trying to decide between the s200 and the Jamin. Given the track record af as other devices are concerned, it would seem that it may be likely. But, just thought I'd throw out the question....
Click to expand...
Click to collapse
Hey Floepie... welcome to xda-dev
Until now... I am not convinced the qtek s200 was as "open" as I had hoped for.
I personally get the "invalid vendor id" for ALL tried ROMs, and I still can't remove the CID. Starting to get pi.... off :!:
Someone ... PLEASE help!!!
G.
Nobody?
Why,HTC do this?For fun? :evil:
Nobody can help :?:
LAST TIME I GO WITH HTC
Still nothing!
I have lost faith. HTC and qtek must be complete morons, if this is the case! I bought my phoen thru expansys.com, and seem to be unable to get any proper support, and I fell pretty sure HTC and qtek are to blame for this mess.
I for one, will never buy HTC again, unless someone can prove me wrong. Sorry to say.
My considerations,
G.
It's not HTC, but Qtek!
I have buy a new Imate JAMin again, and have unlock it wit wizard unlocker and it works great!
I flash a Danish rom for Qtek S200, and thats works fine, but when I try to unlock the phone again, I've get the write error!
So Qtek have made the write protection, not HTC.
Are there anybody ho could fix this issue??
Re: It's not HTC, but Qtek!
dubbi said:
I have buy a new Imate JAMin again, and have unlock it wit wizard unlocker and it works great!
I flash a Danish rom for Qtek S200, and thats works fine, but when I try to unlock the phone again, I've get the write error!
So Qtek have made the write protection, not HTC.
Are there anybody ho could fix this issue??
Click to expand...
Click to collapse
Does this mean that if we have a Dopod 818 Pro/JAMin and flashed it to ANY Qtek roms, we will forever be stuck to Qtek roms???!!! :shock:
Re: It's not HTC, but Qtek!
linux2001 said:
dubbi said:
I have buy a new Imate JAMin again, and have unlock it wit wizard unlocker and it works great!
I flash a Danish rom for Qtek S200, and thats works fine, but when I try to unlock the phone again, I've get the write error!
So Qtek have made the write protection, not HTC.
Are there anybody ho could fix this issue??
Click to expand...
Click to collapse
Does this mean that if we have a Dopod 818 Pro/JAMin and flashed it to ANY Qtek roms, we will forever be stuck to Qtek roms???!!! :shock:
Click to expand...
Click to collapse
Until somebody have fix this issue I must use the Qtek rom in Danish (but that's no problem, Danish is almost like norwegian languge!
Hi Guys,
I have a Dopod 818 Pro with the original released ROM.
Then, I flashed it with JAMin_WWE_2130923_21309112_020720,
then, Qtek_WWE_2090724_20907106_020720
then, with the lastest JAMin ROM
JAMin_WWE_2130923_2139123_022021.
So, my Dopod 181 Pro has been flashed with Qtek ROM and then with JAMin ROM without any problem.
Not sure if it is my device or something I messed with my device
Anox.
anox said:
Hi Guys,
I have a Dopod 818 Pro with the original released ROM.
Then, I flashed it with JAMin_WWE_2130923_21309112_020720,
then, Qtek_WWE_2090724_20907106_020720
then, with the lastest JAMin ROM
JAMin_WWE_2130923_2139123_022021.
So, my Dopod 181 Pro has been flashed with Qtek ROM and then with JAMin ROM without any problem.
Not sure if it is my device or something I messed with my device
Anox.
Click to expand...
Click to collapse
I flash with RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship.exe
when you upgrade to qtek IPL and SPL is up from 1.xx to 2.xx and you can unlock 2.xx. You must use JAFWM to flash.
good rom for Dopod 818/830DAMobiz Prophet WM6 V1.00
I find it very good so far!
A problem to resolve is to delete Thai keyboard!
darling2790 said:
good rom for Dopod 818/830DAMobiz Prophet WM6 V1.00
I find it very good so far!
A problem to resolve is to delete Thai keyboard!
Click to expand...
Click to collapse
After all, most use it in English or Chinese, not Thai
darling2790 said:
After all, most use it in English or Chinese, not Thai
Click to expand...
Click to collapse
PDAMobiz Prophet WM6 V1.00 is easy to turn dead?
In the first half day of using it, it is excellent! But after that, it is easy to be "dead" while running some program,say while searching for contacts! And even after soft reset, it can't be opened smoothly!
后来我发觉，开机很容易死机 [/quote]
我也发现存在这个问题！是不是与自己安装的一些软件冲突啊！我正在查找联系人时死机了！半天起 不来！:ma d:
Dear Darling,
Mine is Dopod 818 Pro,
Can you share with me how to upgrade to WM6, Please?
Please?
Thank's
Khim
datakhim_79 said:
Dear Darling,
Mine is Dopod 818 Pro,
Can you share with me how to upgrade to WM6, Please?
Please?
Thank's
Khim
Click to expand...
Click to collapse
My Pleasure，you can reach me by [email protected]
Best,
Can you also help me to upgrade to WM6 ?
If mail you using your mail.
Thanks in advance
dopod pro 818
HI,
Would really appreciate if you can help me with the upgrade to WM6.
If you have the steps, that would be great. My email [email protected] .
Thanks in advance
Dopod Pro 818
IPL - 1.0
SPL - 2.0
ROM - 2.15.13.27 WWE
ROM DATE - 03/09/06
RADIO - 02.19.21
PROTOCOL - 4.1.13.09
OS - 5.1.195(BUILD 1487.2.0.0)
Thanks
Manage to upgrade mine after going thru' threads...
it was really time consuming especially if you are a newbie like me.. anyway.. have manage to upgrade mine to WM6.
Thanks
i need the IPL, thank you
Please send me link to upgrade dopod 818pro to wm6 .
[email protected]
YOur kindly,
Hi all,
I have beeen using the prophet for arond 3 month or so..
but there are few doubts which will help me understand my prophet better..
1.on boot up it shows IPL/SPL information i know it is to identify the G3 or G4 models like mine is the one ending with 2.15.0001 it makes it a G4 right ...
but I wanna know what is G3 and G4 stand for why is it that all models forget models even all different prophet are either G3 or G4 and not standard as g4.is having a G4 better????
2.The GSM info is shown as GSM 02.19.21 what is this code???
If i change my service provider will this no also change???
3.The OS is shown as OS 2.15.13.27 WWE mine is a DOPOD os since i m in INDIA and phone is O2 Neo..I understand that this is the version and WWE is World Wide English..
Is there any update in this OS or this is the latest OS..
(some places i have seen as ext rom upgrade what will this help for)
Also in Device info it shows as
ROM Ver same as above..
Radio Ver.as 02.19.21
Protocol Ver. as 4.1.13.09
Ext ROM as Ver.2.15.13.121
What are these info....
4.On boot it shows as DOPOD what if i wanna change the screen to O2 or HTC ..can i do this ...What should i do/check before doing this...(available on ftp)
5.Finally the memory in setting shows as
Storage :
Total 42.55MB
and Program as
Total 44.01MB
What decides this ..
I have been installing all the program on to card so why is my memory of 18MB being occupied..
Any tweaks here to change ...
Sorry for being so so so so long but pls answer these questions help me understand PROPHET BETTER...
Thanks so much!!!
Well you can answer lots of your questions by reading the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
I have a MDA Vario, i tried to upgrade to WM6, everything was going fine until 99%, when the upgrade stopped on me.
when i tried to recover the phone, it came up with a error msg saying it cant recover my phone.
Now any time i turn on the MDA Vario, all i get is RGB and
RUU
IPL 3.08.0001
SPL 3.08.0001
Can this problem be fixed, or is the phone competely finished?
help pls
As long as it gets into Bootloaders (RGB) its not dead,download the official carrier's rom and flash it in Bootloaders,it'll recover back to its default status.After as its G4 device,it can only be upgraded to Wm6 through SoftSPL or HardSPL,you can read about it in the G4 forum.
i have the same problem too.
where do i download the rom? how to flash? what is g4?
kurome14344 said:
i have the same problem too.
where do i download the rom? how to flash? what is g4?
Click to expand...
Click to collapse
ROM problems you can download it at -> http://www.shipped-roms.com/index.php?category=windows mobile&model = Wizard