External GPS - Tilt, TyTN II, MDA Vario III Accessories

Hello,
I consider to buy an external GPS BT antenna.
I already own an Bluetooth Wireless Car Hands Free Kit.
Can I have booth devices connected thru BT at same time ?
Cheers.

Yes, as long they use diff. comm ports.
Some devices will be able to send a signal to your Tytn II asking for a pairing, others you need to set up individually.
Choose com 4 as standard for your GPS radio and recco to use com 8 for your carkit (or vice versa) as such, they are far enough from each other to let identify the TytnII the good com. port.

Thanks for you answer !

While we are on this topic - External GPS
Is there a way to assure that you do not turn the battery sucking internal GPS on while using a mapping program and an external GPS?
I'm asking for a friend and I can't try it out so please be really specific and detailed.
I have a 8525 running the stock HTC ROM. Is the control of the external GPS the same as on the 8925?
I managed to pair a Holux GPSlim236 with my 8525 without using the External GPS utility. Do I really need this utility if I'm only routing the data from one receiver to one program?
Regards,
GPSGary

gepp said:
Is there a way to assure that you do not turn the battery sucking internal GPS on while using a mapping program and an external GPS?
I'm asking for a friend and I can't try it out so please be really specific and detailed.
I have a 8525 running the stock HTC ROM. Is the control of the external GPS the same as on the 8925?
I managed to pair a Holux GPSlim236 with my 8525 without using the External GPS utility. Do I really need this utility if I'm only routing the data from one receiver to one program?
Regards,
GPSGary
Click to expand...
Click to collapse
Your software will be able to map a com port. if the device has an internal GPS, just let your GPS soft identify which one and not it down.
When you turn on your external receiver, your divice will identify 2 "GPS receiver found" linked with 2 Com Ports. just set the one linked with your External GPS on manual status. Do not forget to apply an "outgoing port" in your Bluetooth settings.
As for the External GPS utility, I advice not using it, or setting on "automatic" or something called like that.

Related

XDA2 / TOMTOM bluetooth GPS

Totally new at this game! Just bought XDA2 and been given tomtom bluetooth GPS (no instructions) how do I bond it with the xda, it asks for device pin, but you can not input anything in to the GPS (and I dont know the pin if it does need one)
Thanks in advance.
to my knowledge pin of tomtom gps receiver is 0000 which you have to enter on your xdaII, not on the receiver.
i don't know which ROM you have but if it is less than 1.72 you probably have to install bluetooth tools to be able to assign serial port. not for the bonding, but for being able to communicate.
http://bluetooth.i-networx.de/index_e.html
but try it first without
If you are using the TomTom software it will configure all the ports for you automatically. Yes the GPS reciever is 0000. It asks for this Number when you bond "New" device.
Good luck
Chris
Thanks guys. I did need the down load.
It now connects happily.
On my ppc you have to uncheck the accept incoming beams IR option in the connections tab in control panel. On mine these frees up the com port and then tomtom allows you to select the correct one.
Might be the same on yours
Cingular 8125 & TomTom GO 910
Is there anyway to pair these two for use of the GPS features? They find each other as far as the TomTom acting as a Bluetooth headset (albeit a bad speakerphone), but it would be nice to have the GPS functions on the phone as well.

QTEK S110 and Holux GPSlim236 - PLEASE HELP

Hi All,
I have just received a Holux GPSlim236 to go with my Qtek S110, but I am having really hard time getting it to work. The software I am using at the moment is the GPS View, which comes with the reciever.
I have been able to pair them, but that is as far as I get. GPS View cannot see it, neither can some software called GPS Speed Sentry (which has worked with a previous GPS reciever).I have also been on www.pocketgps.co.uk, but I still have not been able to get it working. They keep on mentioning about changing the GPS Com Port, but I cannot find how to do this in Windows Mobile 2003SE. Has anyone been able to sort this out before?
Also do different companies version of Windows Mobile 2003SE differ. For Example could QTEKs Windows Mobile have different bluetooth options compared to Imate, O2 or TMobile? Could this be a reason why I cannot change the COM Port?
If anyone has been able to sort it out, can they let me know, as it is causing BIG headaches!!!
Hopefully I have left enough info...
Thanks
Nick
You do not say what, if any, navigation software you use
I found the Holux GPS viewer v1.05 unreliable and replaced it.
I Searched the internet and downloaded TomTom's GPS driver v2.08. I suspect that TomTom BlueTooth GPS is a rebadged Holux product.
Using the v2.08 driver select GPS and on the top of display drop down menu select TomTom Wireless GPS.
Next select from second drop down list Bluetooth Serial port and COM6.
Select Status and please make certain when using the Satellite receiver that your pocket PC BlueTooth Manager is turned ON.
Good luck
You do not say what, if any, navigation software you use
I found the Holux GPS viewer v1.05 unreliable and replaced it.
I Searched the internet and downloaded TomTom's GPS driver v2.08. I suspect that TomTom BlueTooth GPS is a rebadged Holux product.
Using the v2.08 driver select GPS and on the top of display drop down menu select TomTom Wireless GPS.
Next select from second drop down list Bluetooth Serial port and COM6.
Select Status and please make certain when using the Satellite receiver that your pocket PC BlueTooth Manager is turned ON.
Good luck
COM ports for GPS receiver
Just do the following:
go to
START - SETTINGS - Bluetooth Settings
Check that you have a Bluetooth Serial Port Setup
Inbound COM port: COM4
after that pair the gps receiver with your device.
When your software tries to connect to the gps receiver tell it that it's connect to COM4
That's the way I got mine working with route 66.
Bregards

Compatible Bluetooth GPS Devices for Atom

I have TomTom software installed on my Atom, I've tried using a Polstar Bluetooth GPS unit to see if that would work but it fails to read the correct Comm port on the atom.
Does anyone know if this is compatible with the Atom, or of any other GPS devices (bluetooth or cabled) that would work?
Hi there
i am working with GPSlim236 from HOLUX and it very good and easy to install.
cool, thanks.
What's the battery use like if in use? The problem is that the lighter socket in my car is 'dodgy' to say the least, so the longer the life before i have to charge the better
(hmm...I predict being guided somewhere, losing battery life on GPS, and getting lost....SatNav at its finest.......)
The BT-77 (Nemerix chipset) from e-bay also works really well, especially considering the price. I have used this in Australia, UK and the US and have had no problems pairing it with the Atom.
Battery life is also good, as I've used it for a whole day with no sign of running out.
sometimes to connect GPS device, you need to create new OUTGOING port, and pareing the device
Thanks jeremy_elman, I will investigate.
Kropotov, I can get it to pair ok, and I have tried setting outgoing ports. The problem is that it won't allow me to set the outgoing port to the correct COM port that I need for the GPS. It comes up with an error.
I checked up on this from Polstar and they said to adjust registry settings. But even this doesn't work and they couldn't give me any information with regards to compatability. But I know the Polstar one I had works as it was working on an iPAQ 6340, installing it as a cable GPS device and setting the baud rate. The outgoing com ports on bluetooth could be set to the relevant ones for the device, and pairing was straight-forward.
Problem with GPS Reciver on Atom XDA with Tomtom
Hello, i've installed Tomtom 5.21 and the maps and everything is Ok. but i can't make the link between my gps reciver (Royaltek Star III) and the atom XDA. I've installed the partnership in the settings but it doesn't connect with the antenna. I've seen in my other pda (ipaq hx4700 and ipaq hx2790) that there is a bluetooth manager in the connection setting but there is non in the atom XDA. Do you know what's the solution ?
I've the same problem than you for the outgoing ports, i can't choose the one i want and i can't find the good port in tomtom gps settings.
Thanks
kropotov said:
sometimes to connect GPS device, you need to create new OUTGOING port, and pareing the device
Click to expand...
Click to collapse
same with u, kropotov. i use garmin gps10 with ATOM EXEC. work well and smooth.
dlawson5
it's very strange... i have all com ports free, and can choose all, include 8, that tomtom need. Do you have other bluetooth devices, pared with Atom?
I'm using a Garmin GPS10. To get around similar com port issues i install Franson's GPSGATE. A downloadable trial is available to try before you buy. The two advantages of this software solution is that you can nominate virtual com ports meaning you determoine the com port for the TomTom software and secondly you can use more than one GPS software package simultaneously. I run both Garmin Que (navigation) and OziExlorer (topographic and mapping) at the same time. You can't do this without GPSGate. Many bluetooth GPS devices drop their connections regularly. I find that GPSGate holds the connection better and reconnects quickly if it does drop. I highly recommend you try this before chasing around for different GPS devices.
John
Atom with BT GPS
I am using the Atom with the Holux GPSlim236 and it works like a charm.
Rated GPS battery life is 10Hrs and it uses the nokia 6xxx handphone battery so easy to charge and/or replace when battery gets old.
I had some problems using it initially 'cos built right into the Atom is a GPS management software that manages GPS connections apparently so that you can run more than one GPS application in the Atom and all the applications can share the GPS data. However I find that turning this on tends to lockup the GPS application (MapKing) and sometimes causes lost connections. TURN THIS OFF. Besides, I don't see myself using more than one GPS application (but that may change ! looking for a good track logging software - anyone knows one ?).
The other thing I noticed which makes the connection more reliable is to turn off the secure serial communication.
With those two settings off, works like a charm and no more problems !
O2 Atom with Holux GPSlim236 Bluetooth GPSr
Hi,
Not sure if this helps but I am able to get my Atom to work with my Holux BT GPSr using Garmin Que.
Here's the link to how I set it up : http://www.malsingmaps.com/forum/modules.php?name=Forums&file=viewtopic&p=41060#41060
So far, it rocks!
O2 Atom with Holux GPSlim236 Bluetooth GPSr
Hi,
Not sure if this helps but I am able to get my Atom to work with my Holux BT GPSr using Garmin Que.
Here's the link to how I set it up : http://www.malsingmaps.com/forum/modules.php?name=Forums&file=viewtopic&p=41060#41060
So far, it rocks!

Sharing built-in GPS between two phones.

Rookie question here: Is it possible to share my Trinity's GPS unit with my Wizard over a Bluetooth connection? Now I don't know if Bluetooth is required to be enabled when using GPS because the Trinity communicates to the GPS unit over BT or if it's just something to get the damn thing working but if it does actually send the GPS data over BT, how would one set the other phone to use this signal?
Thanks.
forcedalias said:
Rookie question here: Is it possible to share my Trinity's GPS unit with my Wizard over a Bluetooth connection? Now I don't know if Bluetooth is required to be enabled when using GPS because the Trinity communicates to the GPS unit over BT or if it's just something to get the damn thing working but if it does actually send the GPS data over BT, how would one set the other phone to use this signal?
Thanks.
Click to expand...
Click to collapse
Try GPSgate http://www.franson.com/gpsgate/
I have shared Trinity's GPS with my laptop before, I don't see any reason why not between two phone.
GPS data is a one way data stream, so you can record it or redirect it to any virtual COM port on any device designed for it.
But I think GPSgate is the only app I can recall that does it nicely.
Also checkout the PocketPC Experts' reviews of GPS software for other possibilities.
V
You may try also GPS2Blue (http://users.skynet.be/hofinger/GPS2Blue.html) - benefits: it's freeware.
Thanks fellas for your wonderful suggestions. I'm looking into them now.

WM6 Bluetooth GPS NIGHTMARE!!!

HELLLP upgraded to WM6 on my BA and now my i-Blue GPS reciever wont sync up and TOMTOM cant even see it im gonna scream and cry has anyone got any ideas??? PLEASE PLEASE help
My BA works fine with my GPS receiver (make sure you added it, and assign COM port to the incoming port). Then I use TT6 with COM6 and it works just fine.
Some people uses the GPS application in Settings, but I did not.
now that used to be the case however i no longler have the ability on the menu to choose the BT ports on TT6 i have in this order..
BT UART
SERIAL CABLE ON COM 1
COM 9
IR ON COM 3
and thats it theres some missin:S any ideas??
also its just not syncin up like it used to with Wm2003 Grr
Try to assign to your receiver COM 1 or COM 9
Sometimes it is the GPS application that doesn't know how to use the external GPS management program.
Go to Settings -> Connections -> External GPS, set the two ports to "none" and uncheck the option to manage the ports automatically. Reset the device and try to choose the same port you have chosen at pairing.
I have just finished GPS tutorial for you to know
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardSettings_GPS
Let us know if it helps
kerio said:
I have just finished GPS tutorial for you to know
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardSettings_GPS
Let us know if it helps
Click to expand...
Click to collapse
Wow! it works great man!! thanks kerio (and gang)!!
This is kind of bit off-topic, but since you're talking about bluetooth GPS on a Blue Angel I wanted to ask: how well does it work? As I have do not have any sense of direction at all, I've been thinking about buying a Bluetooth GPS receiver, but can a $35 GPS really be accurate and work well? Will any BT GPS receiver work? What kind of software do you use on the PDA? Thank you!
hi, set the gps hardware port (com6) in the external gps settings. set the new outgoing port in the blutooth settings (com6) and in the TT6 set the com6 in other nmea gps. it works.
Echo9 said:
This is kind of bit off-topic, but since you're talking about bluetooth GPS on a Blue Angel I wanted to ask: how well does it work? As I have do not have any sense of direction at all, I've been thinking about buying a Bluetooth GPS receiver, but can a $35 GPS really be accurate and work well? Will any BT GPS receiver work? What kind of software do you use on the PDA? Thank you!
Click to expand...
Click to collapse
i have a rikalin bluetooth gps and it's working great.
Tomtom 6 and route 66 both working without any problem.
regards stef

Categories

Resources