motorolla headphone splicing? - Tilt, TyTN II, MDA Vario III Accessories

My stock HTC headphones are messed up they dont have sound on the left side but the button and mic still works. I tried plugging in motorolla usb headphones in there and they didnt work at all. I realized HTC uses their proprietary Extusb ! Is it possible i just cut off the usb end of the HTC headset and splice the wires into the motorolla ones. My motorolla ones have the button and mic on it just like the htc so i was wondering if the wiring is different and prevent those things from working. Has anyone tried this????? I'd rather not buy brand new headphones and i dont really like the bulk of the 3.5mm adapters it adds to the phone.

Related

8125 Audio Output Jack Problems?

I recently have gone through two different Body Glove Sport Stereo headphones with some issues. I can't decide if I have another faulty headset or if the phone audio connector is the issue. The body glove headset is similar to the headset that comes with the 8125, but it looked more comfortable.
The problem I am having is this, the headphones only play in the right side. Messing with the plug on the headset results in some quick burst of audio on the left side and pulling it out a tad gives me some faint left audio and the right side audio goes out completely. It seems the plug and jack don't quite jive... anyone else experience this? It comes with an adapter for the "bigger jack" and upon trying one of my girls iPods, they work fine with the adapter in the mix.
My application is this... I listen to MP3's while riding my motorcycle and the earphones that came with the phone hurt my ears after a while. Plus they don't have the greatest audio quality. Looking for a comfy replacement, but the above issue has me scratcing my head.
Here is a link to the headphones: here
i think...
i think you have the wrong adapter. i tried using the slvrs adapter with my 8125 and it did not work same prob as you. i went to radioshack and got one from there and it did. im most absolutely sure is the inner wiring. what happens is that there's also a connection for a microphone on the 8125 so some adapters dont work.
http://www.pocketpctechs.com/main~unit~Cingular_8125-559~area~accessories~item~PPCPADPT21.htm
ps my friend got a mono one at radio shack and it worked for him both sides. hes not a audiophile but you get the idea, it has to be the connection of your plug.
The headphones in addition to be being stereo, have the microphone too, I think the paragraph in the page you linked clears up a few questions for me:
Most manufacturers create their devices allowing audio compatibility with only their specific brand headset or headphones. We have designed and engineered several different types of audio adapters to accommodate a variety of devices. Our unique audio adapters give you the freedom to use any standard 2.5/3.5 mm. 3 conductor headset and/or your favorite set of headphones.
Click to expand...
Click to collapse
It would seem although the Body Glove headset uses the 2.5mm jack, the internals of the 8125 are off enough that a select few aftermarket stereo headsets with mics will work with the phone. Interesting.
Upon further examination of the jack, it is different than the one that came with the phone. In spite of the BodyGlove being a stereo headet with a mic... just like the one that comes with the phone, the connector is different enough to not with aftermarket stuff I guess. Those dirty rascals!!!
The connector on the left is the one that comes with the 8125, the one on the right is the BodyGlove.
Searched and found this old thread. I went to connect my 8125 Wizard to my cars 3.5 jack using a standard adapter and it only came left channel.
Is there a more cost effective proprietary four-conductor jack to a 3.5 mm converter than posted above at PPC Techs? I was hoping to spend a few dollars.
I'm actually using my old Ngages audio cable to get Stereo sound out of my car stereo. It works but sometimes I can't use the mic on the cell phone to talk.
When it works it's really cool, but otherwise I gotta unplug the cable and use it like a regular phone during phone calls.

problem with the mic

i have the following problem: when i plug my wizard to my car stereo via 2.5mm stereojack cable the build-in mic stops working so i can't talk using the cars stereo...is there any reg-edit or program that can allow the built-in mic to work while the cable (or any handsfree) is inserted? i read somewhere that there were people that have their cables plug but still the mic is running...can you tell me if your jack has 3 poles or 4 poles? thanks in advance!
help please [;
i'd rather say it's a hardware problem. in most headset jack sockets i've encountered it's done by a jack plug simply unpluggin' built in speaker/mic due to the design of the socket. of course i may be wrong, nut i'd say registry has nothing to it...
i think as you do, but someone mentioned on another post that he puts the cable and the built in mic continues to work.

Headphone adapter disables internal mic.

When I plug my heaphones in, it seems that the internal microphone on my Tilt gets disabled. That is with my headphones plugged in, no one can hear me on the phone.
Is it possible to talk on the phone without having to uplug the headphones?
Nope.... plugging in headphones assumes you have headphones with a built in hands free mic, like what are supplied with the phone - its possible to get an inline mic so that you can use your own phones though.
Thanks
Thanks, my phone did not come with such headphones. So I am using a headphone adapter and a pair of earbuds. Has anyone seen any headphone adapters with a mic built in?
I want to be able to plug it to my car's stereo's aux in, hear people through the speakers and talk at the same time Short of splicing the cable and soldering on a mic, can such adapters be purchased anywhere? Anyone seen one?
Wow Just saw one!
Just saw one on the top banner Exactly what I am looking for. Unfortunatley they are out of stock. Would also be cool if it had an extension for the charger....
http://store.xda-developers.com/xproduct.php?xProd=1854&jssCart=765305601f8657736001990a45961674
denull said:
Just saw one on the top banner Exactly what I am looking for. Unfortunatley they are out of stock. Would also be cool if it had an extension for the charger....
http://store.xda-developers.com/xproduct.php?xProd=1854&jssCart=765305601f8657736001990a45961674
Click to expand...
Click to collapse
Go directly to the manufacturer.
BTW, googled it!

Connecting to car stereo

Hi
Just after some input on connecting to a car stereo. My thoughts
1) I have read the guide on creating your own mini usb to 3.5mm jack plug cable and have also seen similar things for sale
2) I have seen on a car forum for the car i own a guide for making a cable connecting 3.5mm jack plug to the AUX on the car stereo (used for the cd changer).
3) I can charger my kaiser through a usb cable in the car.
4) There is obviously a power source on the stereo.
Given the above, would it be possible in theory to have a direct connection between the phone usb and the stereo that would allow the phone to play through the stereo and also charge it at the same time?
I dont want to go through the process of doing it if there is some fundamental reason why it cant be done.
this might be wht your looking for hxxp://cgi.ebay.co.uk/3in1-usb-Adapter-for-HTC-KAISER-P4550-TYTN-II-VARIO-III_W0QQitemZ190232228190QQcmdZViewItem?hash=item190232228190&_trkparms=72%3A12%7C39%3A1%7C65%3A12&_trksid=p3286.c0.m14
Of course you could. But keep in mind that your microphone won't work for most usb+3.5mm adapter. It's very troublesome to pick up the phone. I would recommend you to opt for BT route. e.g. Stereo bt headset w/ 3.5 mm adapter like Sony Ds-220 or BT head unit like JVC BT-1
Something you might have to research is alternator whine.
I made a lead myself as you described. But as long as the device was charging There would be a buzzing coming from the speakers. This went away when running on battery power and when the device was fully charged.
I also tried a bluetooth device, and again if I tried to use it while it was charging I would get the dreaded buzzing.
I still have not found a solution. FM transmitters have never worked either for me. There is not enough space between channels here.
5manarmy said:
Something you might have to research is alternator whine.
Click to expand...
Click to collapse
You can solve this by installing ground looping isolator if the power source from yr car is not clean
Hi.
I had the same problem, see my solution with the help of others:
http://forum.xda-developers.com/showthread.php?p=2353474
Good luck.
Well I think based on what I have read and the replies on here I am going to give it a go.
I will update on here once completed
I have a bluetooth stereo in my cab and my phone connects to the stereo using the bluetooth, I am also able to use Btmusic and play anything on my phone thru my car stereo its great for the odd file just wish it would do video as well thru bluetooth.
Os
jackleung said:
Of course you could. But keep in mind that your microphone won't work for most usb+3.5mm adapter. It's very troublesome to pick up the phone. I would recommend you to opt for BT route. e.g. Stereo bt headset w/ 3.5 mm adapter like Sony Ds-220 or BT head unit like JVC BT-1
Click to expand...
Click to collapse
The original mic supplied works okay for me with the headphones chopped, but its very echoey even mounted as far from my speakers as possible so would agree with the above.
Ive the same setup in my car. The phone stuff was easy, it was getting the right VAG adapter to fit my cars HU that gave me the most trouble.
I also hardwired in my charging cable to keep it tidier and my cig lighter free, might be worth thinking about.
I have made a start on this. I have wired in the cable from the Car stereo and at the moment this ends with a 3.5mm Jack Plug. I have also bought the YC A200 cable from HTC which allows connection of the 3.5mm jack plug, a wired headset and also mini usb charging. In fact two of the HTC cables were delivered to me (one ordered but 2 delivered and invoiced) so I might use one as a development cable.
So far - music plays through stereo ok, not over impressed with the quality so far but am going to fiddle with the settings. SatNav also plays through the stereo - much easier to hear. I have had an issue this morning when having music playing and satnav running that the GPS signal was being lost. Not sure if this is a problem with running the two things at once or an interference issue from somewhere. I have never had problems with the GPS before. Am going to do a soft reset and try again on the way home tonight.
I was looking at hardwiring the charging cable to tidy things up and free up the lighter socket. I was going to use the 12v feed from the stereo. Is there anything I need to do or be aware of on this?
How does the mic etc work? I know you can use the headset but I would prefer to use the car speakers if possible. We also have a number of old nokia car kits at work which I was thinking of using for the mic. Would the speaker side work if I connected the relevant cables from the headset port on the HTC adaptor to the 3.5mm jack plug connections?
Im just using the mic from the supplied headset, chopped off the cable past the mic/volume slider and mounted it in the car. Call audio comes through the car speakers.
To hardwire the charger in you need step the voltage down from 12v to the needed 5v. I took a live and earth from the back of the stereo, took apart a usb cig charger and soldered the cables into it, put it back together and hid it behind the dash. Then just took a mini usb cable from that up to the 3in1 plugged into the phone.
SRSWOWHD cleaned my sound up considerably using Pocketplayer.
Well, my experiences so far,
Got the HTC YC A200 cable
1) Playing music through car stereo works great
2) GPS works fine most of the time, still not sure what the problem is, mainly voice directions not working properly all the time
3) Charging via the cigarette lighter socket, still got to hard wire the charging
Latest development
Got a Nokia car kit mic, just had to trim the locking lugs off the 2.5mm (or is it 2mm) jack plug. The mic works fine and the caller can hear me ok. The sound comes through the stereo but is not as loud as the music but i can change this slightly by fiddling with the plug, gets louder or quieter but still not the same volume as the music.
Any ideas? Would it be that the HTC adaptor is expecting the htc wired headset?
removing alternator whine / hum
Finally solved the alternator whine / hum over at my place too. Key is to take the power for the charger directly from the power feeding the car stereo. That way both the stereo and charger reference the same ground which eliminated the ground loop and thus the alternator noise.
http://www.jenrathbun.com/phpBB3/viewtopic.php?f=17&t=26&p=76#p76

Microphone only adaptor

Heya,
Currently I have a 3 way splitter HTCusb -> Power (miniusb) | Audio (3.5mm) | HTC Headset Connection (HTCusb)
What I need is a microphone only 'headset' to go in the headset socket, as the audio is allready being passed to my car's speakers via the 3.5 jack.
Does anyone know if/where somthing like this exists? or should i buy a cheap headset and splice the earphones off?
Also anyone else find the fuze is unable to gain positive charge whilst on and connected to a 12v ciggaret adaptor, it still drains but at a slower rate, but I do not have an offical charger, which may be the problem.
+1
I also have my audio sent to my car speakers. But since the phone thinks I have a headset attached, the phone microphone is disabled. So when it rings, I have to undock it from the cradle and stick it to my ear. I'd love to have just a microphone mounted near the visor. Anyone know where I can find one?
Wouldn't this do as a workaround?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=169481
Plug into the HTC headset connection on your adapter, then you have a micropohone. Then plug the 3.5 jack into the end (instead of the headphones)
The large block adapter that came in the box works for me and allows me to use my car speakers w/ aux input and there is no problems with the microphone.
I had this problem with my tilt with the Y splitter adapter, however the multi adapter that comes in the fuze box works for me perfectly.
http://cgi.ebay.de/Audio-Adapter-3-...14&_trkparms=72:1229|66:2|65:12|39:1|240:1318
There will be the same offers on ebay in your country. Searchwords: HTC 3,5mm

Categories

Resources