Hello,
This soft like the touch cube : http://www.touch-commander.com/
I will post you this afternon the .cab and now no probleme to invoque the cube with your finger.
(You don't need to start application with a button and no icon in programs : just invoke the cube with your finger !!!)
First : Just install The cab.
Second : Make a soft reset and enjoy.
Thanks to Efrost.
Private69.
@++++++
unfortunatly it is not working on my p3600.
I get an error message: "Unexpected error in TouchCommander.exe..."
There is also no icon in the program folder installed.
Any ideas?
20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Device Compatibility
MIO........A700.......WM5.........Work QuickDial.exe Dead
Asus.......535.........WM6.........Work QuickDial.exe Dead
Dopod.....P800W.....WM5.........Work QuickDial.exe Dead
MIO........A501.......WM5......... Work QuickDial.exe Dead
CHT........9100.......WM6..........Work
AT&T......8525.......WM6..........Work
HTC......TYTNII......WM6..........Work
Dell......Axim X51V..WM6..........Work
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616
Can you please post device compatibility list or is this for a specific device only?
Regards,
Carty..
Thanks man I will try it
let me try it. thx
Mirror please!
here is the mirror.
hope it is useful. maybe u can put it in the 1st post to make it easier?
thanks.
http://w14.easy-share.com/11341771.html
I know it's probably covered somewhere, but with so many posts on the Cube and FTouchFlo, I can't find it.... How do I get the gesture system to work on HTCAlbum after installing FTouchFlo? It's in the list of exclusions properly, but the gestures no longer work; even if I disable FTouchFlo and soft-reset my Kaiser.
Sorry guys. Is the attached file corrupted or not complete?
leo2016 said:
20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616
Click to expand...
Click to collapse
Will this work on square screens (240x240)
Works really well, thank you!
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?
I may have to try this once the results are in....
mauce said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?
Click to expand...
Click to collapse
i think the same thing happen to me.
T3D0nG said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Click to expand...
Click to collapse
Readme
# Please Remove Any VER FtouchFlo、FTouchFloConfig
# Please Install HTC HOME
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
WM5
Does this work with wm5 standard oem rom devices?
Is it the original Cube?
Is the media player interactive?
Will have efrosts touchflo installed affect it?
Thanks
It works! I followed all of the instructions in the readme file: Removed the touchflo that I already had on the device (For removing previous touchflo versions: I had my old touchflo in the start up menu in windows, and was having trouble getting rid of it since it was already running. So I cut and pasted touchflo to a different folder, soft reset, and was able to delete it so it wasn't running at start up anymore), already had HTC Home on there, installed the cab installer, went into the touchflo config file and enabled touchflo, did a soft reset, and it works perfectly.
...only thing is the "New E-Mail" and "SMS/MMS" tab seems dead, but it still works from HTC Home.
The "contact" side takes a couple of seconds to come up but thats expected. Everything else works like a charm. Easily the best one-stop .cab installer of the Touch Cube that I've tried so far.
Thanks for the post.
...sorry....I forgot:
It works fine on my AT&T 8525, WM6 offical AT&T Rom. Thanks again!
If you had FtouchFlo installed previously, make sure you delete the exe file from /Windows/Startup and leave the one from the cab installation. My cube worked after that.
ADD Device Compatibility
Works great here. I'm using a Blue Angel running xplode's latest WM6 ROM.
Thanks for the great work!
Is anyone using this on your TC? How does it work?
http://forum.xda-developers.com/showthread.php?t=336234
TIA!
Hi,
It works... but you have to install also FTTouchFlo...
BYE, Bobo
I see no reason using a clone when you got the real thing
u can use this. i have it also and now i have two cubes like when i slide down-up i get the htc orignal cube and when i slide up-down i get the SCLPC theme htc cube. to use that u need flashlite 2.1 and ftouch flo1.4 and ftouch flo configuration.
1. install all of them
2. go to ftouch flo configuration and then change the slide option like sliding up-down to open the tube and also uncheck the other settings only change the setting for up-down and thats all !!!i have included the flashlite 2.1 and also the ftouchflo 1.4 install them and then install the theme and then change the configuration the file for configuration is in /program files/ftouchflo
its .text file so easy to open with pda change and save !!
Thank you!!! One more question.
I have Touch Settings v2.25 installed. I will not need this now, right?
Well, I am back and I am glad to have some time to support the community again, updated the first post and i will flash the rom today and will be able to support this thread as well.
Windows Mobile 6.5.3 Beta English Rom 28008
V1.0
Download via Rapidshare.com
IMPORTANT! If a program can not be closed with the X, please use the OK hard key!
Included Programs:
- HTC USB to PC
- HTC Comm Manager (Replaced with an older Version)
- Device Information
- Microphon AGC
- Button lock Setting
- New Keyboard Layout
- X-Button (Programs close by clicking X, for minimizing tap and hold X, tap and hold the Start key for Taskmgr)
- Reconizer integrated!
- HTC Power
- HTC Advanced Netzwerk (For GPRS Settings)
- WMP replaced (By a better player! Plays everything!!)
- xdaShutdown (Down in the Taskbar!) IMPORTANT!!! Shutdown function has a Problem with the Touchscreen!! does not work for landscape mode
- FlightMode
- .NetCFcfg
- Keyboardbacklight
- WLAN Settings
- New Bluetooth Settings!
- New Telefon Settings!
- 16MB RamDisk
- WM Widgets compatibility (IE8 must be installed!)
FIX:
- SMS Alarm
- changed Start Menu
- XIP improved
- Alarm Sounds
- CHome changed
- Input Options
- GPS Option FIX New
- Provider FIX New
- Lan Option FIX New
Misc:
- Made with a new Kitchen (much better)
- SQM Dummy (not important)
- FWUPDATE Dummy (sends data to MS)
- I deleted some files for more space
- System Tweaks New
The ExtROM can be used for the new version!
Extrom 23081:
Download via Rapidshare.com
- Office (UPX)
- Pocket IE8 (UPX,FIX Zoom)
- MyPhone
- WM MarketPlace
- NetCF 3.5
More Windows Mobile Apps by request.
The Extrom is installed by putting the folder to the sd card. The installation starts automatically after a soft- or hard reset. The cfg.txt can be editted to personal use.
In correspondance with cosmicgate, i decided to post our guide on how to upgrade here, to avoid question further questions about that:
THESE INSTRUCTIONS ARE SUITABLE FOR WINDOWS XP COMPUTERS ONLY!!!
For people running WM5/6x but with 43MB of storage:
You have to downgrade to WM2003 and here's how to do that:
1. Download this Windows Mobile 2003 SE rom:
Download from Rapidshare
Download from Uploaded.to
and extract it to a folder of your choice.
2. Remove both the the SIM card and the sd card
3. Put the device into Bootloader Mode, pressing power+record and reset
4. your device display shows Serial v2.0x
5. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
6. Now let's start the actual Upgrade:
7. Navigate to the Upgrade folder
8. Start Maupgradeut_noid
9. If in the 2nd window the rom version is not shown, something went wrong, start over!
10. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
11. After it finishes perform a "WM2003 hard reset" by pressing power and reset
12. wait for the extrom to finish
13. now you can re-insert your sim and sd card (if you are planning to go on from here, you can also leave them out).
14. proceed with "For devices running wm2003"
For devices running wm2003:
1. Copy repart_doc.exe and the unlocker cab to the device and install the unlocker. In the start menu you will find a folder named "Extrom Tool".
2. Click "unhide" (if you are getting an error message, proceed with 2.a, else with 3.)
2.a the unlocker installs into the standard folder for program files, which depends on the rom language can be "\programme" or "\programmes" etc.
2.b the link in the start menu always points to "\program files"
2.c the easiest way, to solve that, is to rename your program files folder to "\program files"
2.d that destroys parts of the system, but doesn't matter because it is just needed for unlocking
2.e since now the link location should be correct, proceed with step 3.
3. Click "unlock", maybe a soft reset is needed.
4. Start repart_doc.exe
5. Set the future size, if not pre-entered, to 128kb (smallest possible partition size on this file system)
6. Click "Format now!"
7. Soft reset
8. Go back to the Extrom Tools
9. "Lock"
10. "Hide"
11. Now proceed with "Upgrading a WM5/6 device"
Upgrading a WM5/6 device
1. Remove both the the SIM card and the sd card
2. Put the device into Bootloader Mode, pressing power+record and reset
3. your device display shows Serial v2.0x
4. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
5. Now let's start the actual Upgrade:
5.a copy the downloaded nk.nbf to any given folder, let's call it Upgrade 28008
5.b copy the contents of this package to the same folder: MAupgradeUt_noID
5.c Start MAupgradeut_noID
6. If in the 2nd window the rom version is not shown, something went wrong, start over!
7. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
8. After finishing, take the device out of the cradle take out the battery and insert the SIM card
9. copy the EXTROM folder to the sd card and insert the sd card
10. Hard reset the device, pressing reset+power and record+camera and in the menu, that appears set:
Enable_Kitl: NO
Clean Registry Hive: YES
Format Storage: YES
using the camera and record buttons.
11. press the mail button to confirm your selection.
12. your device starts for the first time, you align the screen and let the extrom install, it soft resets and your device is ready to use
Special thanx to d tow and chef tony
I will try it.
Synchronization does not work Microsoft ActiveSync Thank you Chef_Tony
what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?
Chef_Tony said:
what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?
Click to expand...
Click to collapse
Je bent echt geweldig werken nu
You are really great now working
Bedankt
Thank you Chef_Tony
I'm am also DLing now and will certainly give it a try. Great work and thank you both, D-two and Chef Tony.
Good work ;
It seems beautiful Rom
Many Thnx , Maybe I'll try it later
Best Regards.
great work..
how about input settings?
yes, i know that they are missing, i wrote d-two about that, i am missing them too.
hi good work
but there is missing in the contrast setting too.
hi d-two! i can't open wmp and set sounds & notification? why?
hi d-two! missing backlight slider
@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!
Chef_Tony said:
@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!
Click to expand...
Click to collapse
ok Chef_ ,i waiting for final version
what about microphone icon in the system settings is it there
how to turn on backlight?
====
edit:
problem solved
aaraj said:
what about microphone icon in the system settings is it there
Click to expand...
Click to collapse
No, there is no Microphone AGC in the settings.
changed 1st post
when using Lanscape mode, and at the restart, the screen will return to Potrait with a touch screen that does not irregular like the R71's Xplode. but it was not my experience on the d-two ROM version 1 (WM6.5.1 build 23052). try to use the method Lanscape then restart, then you will experience it.
one again
about gprs icon
gotz said:
great work..
how about input settings?
Click to expand...
Click to collapse
This solved the input settings problem:
Remove the "Redirect" value under the following keys:
[HKEY_LOCAL_MACHINE\ControlPanel\Input]
Until now, it seems to be a very fast and stable ROM!! My congratulations on this D-two!! and my thanks to Chef_Tony.
hi guys, i want to change my phone i-mate K-JAM's keyboard layout from QWERTY to QWERTZ
i tried Schaps Advanced Tool Config but it didnt help
am using Frazzs cooked ROM btw if it has anything to do with that..
Hey Evil Eye,
Have you tried PocketCM Keyboard? You can customize the layout editing a single file, if there isn't the one you're looking for already.
Check the Customize section, and have fun, lol!
Cheers
eklisiarh said:
1. Install the registry editor like Total commander ( http://ghisler.fileburst.com/ce/tcmdpocketarm.exe ) or Resco Explorer ( http://www.resco.net/pocketpc/explorer/downloads.asp ) to your Pocket PC
2. Open the program on your device and go to [HKEY_CURRENT_USER\ControlPanel\Keybd].
3. Create New String Value (if you already dont have one with the name Locale)
4. Type in Value name: Locale
5. Type in Value Data: 0407 (as i have an german device. NOTE: You've to look in the "LCIDHex" column on this site: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx for fourther area codes)
6. Close the window by clicking on Ok
7. Exit the program
8. hold your powerbutton for a few seconds until you'll be asked if you really want to switch your device off, click on YES
IMPORTANT: DO NOT RESET DEVICE WITH STILUS BY PRESSING RESET BUTTON
9. Turn on your device and it should work.
Click to expand...
Click to collapse
this thing worked, found it here http://forum.xda-developers.com/showthread.php?t=263533
thanks so much eklisiarh
@nandobang thanks for your help too