Related
I have install the K-JAM_WWE_1010903_106_10110_ship.exe on my Wizard. The keyboard-layout change to english. Is it possible to change the keyboard layout back to a german layout?
Thanks
This is a good question. Does anyone know this?
Re: Full answer
eklisiarh said:
1. Install the registry editor like Total commander ( http://ghisler.fileburst.com/ce/tcmdpocketarm.exe ) or Resco Explorer ( http://www.resco.net/pocketpc/explorer/downloads.asp ) to your Pocket PC
2. Open the program on your device and go to [HKEY_CURRENT_USER\ControlPanel\Keybd].
3. Create New String Value (if you already dont have one with the name Locale)
4. Type in Value name: Locale
5. Type in Value Data: 0407 (as i have an german device. NOTE: You've to look in the "LCIDHex" column on this site: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx for fourther area codes)
6. Close the window by clicking on Ok
7. Exit the program
8. hold your powerbutton for a few seconds until you'll be asked if you really want to switch your device off, click on YES
IMPORTANT: DO NOT RESET DEVICE WITH STILUS BY PRESSING RESET BUTTON
9. Turn on your device and it should work.
Click to expand...
Click to collapse
This method does not work on my AKU2.3 ROM (the "Mr Clean" ROM). My local Qtek distributor has a CAB available that changes the keyboard layout to Swedish - that fix worked on the older ROM versions but all it does now is to inactivate all the buttons on the Wizard (!).
So I really need to find a way of setting the keyboard to Swedish on my WWE ROM.
Any ideas?
/politby
Fixing German QWERTZ keyboard layout for O2 miniS with English ROM installed is very simple.
Many nomally use AEKmap, but this is not allways fine for somebody.
Now we need a small registry hack.
1. Use a registry editor like total commander.
2. Go to \HKCU(HK Current User)\ControlPanel\Keybd\Locale.
3. Change the value of the key "Locale" from "0809" to "0407". "0407" is the locale ID for Standard German. You can find other Locale ID suitable for you at: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx.
4. Do a soft reset and enjoy. All the keys and symbols have fixed right.
Hope this help someone.[/list]
wooooooow!!
That's good.
I will try that NOW
Well I don't see any Locale folder under Keybd...
What next?
cizake said:
Well I don't see any Locale folder under Keybd...
What next?
Click to expand...
Click to collapse
Dear cizake,
"Locale" is not a folder. This is a key, locating under the folder "Keybd". We have to change the value of this key. Check the path again, pls.
Hope this help.
I cannot change the vaule, I use PHM Registry editor, after soft reset, the vaule back to 0804,not 0407.....why??
sim1 said:
I cannot change the vaule, I use PHM Registry editor, after soft reset, the vaule back to 0804,not 0407.....why??
Click to expand...
Click to collapse
I have no idea. I am using total commander. This is free at here http://www.ghisler.com/pocketpc.htm.
1. Check your programs that running each time you start windows at \windows\startup\. If they change keyboard settings.
2. After changing the registry key value. Do the soft reset by this way: Hold down the power button for ~5 seconds. When being asked to turn off the device, tap Yes. This will completly turn off the device and save the changes in registry. This method may different from taping the stylus to the reset hole.
I dont see Locale either .... would really appreciate any help on changing :
a) software keyboard layout and
b) hardware keyboard layout
pencilcase said:
I dont see Locale either .... would really appreciate any help on changing :
a) software keyboard layout and
b) hardware keyboard layout
Click to expand...
Click to collapse
Check the path again:
The folder: \\\Registry\\HKCU\ControlPanel\Keybd\
The key: Locale.
If you do not see the folder. Create a new folder "Keybd", then create a new key with name "Locale".
I thing this may help.
This is a fix for hardware (real) keyboard only.
Cool. For AZERTY keyboards the value is 040C. My ROM version didn't have Locale value in the HKC\ControlPanel\Keybd, I had to create one myself. It has to be String value, not DWORD. Thank you for great hack.
GUYS! YOUR ARE GREAT!!!
Works perfect with Eng for Russian Keyboard (Russian code is 0419). Now I can switch between Russian and English
yes can confirm 0809 works a treat for english keyboard, thanks!!
Sweet!
Yup! works a treat. Have now changed WM 5 from french to English (which gave me the english keyboard problem) and thanks to you changed the keyboard layout to French. Brilliant. By the way, where could i get the new qtek 9100 ROM 1.6 WWE?
Sorry, but this nice solution is not working after upgrading to 1.6.7.1
This entry in the Registry does not exit anymore. I can only find things whichhave the value "e0010409" for english keyboard and i want to get back my german one. Has anybody that number?
Check again kbaasch
Check the path again:
The folder: \\\Registry\\HKCU\ControlPanel\Keybd\
The key: Locale.
If you do not see the folder. Create a new folder "Keybd", then create a new key with name "Locale".
I thing this may help.
This is a fix for hardware (real) keyboard only.
my keyboard is now ok
oainot
Its works fine, thanks.
I have T-Mobile MDA Vario from German, I have flashed it with ROM: 1.6.7.1 WWE
And, with reg file my keyboard is now ok.
Code:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"Locale"="0407"
MrBuz
Great, stunning solution! Thank you! This is absolutely BRILLIANT !
I have 1.6.7.1 WWE and Russian layout works perfectly...
But the English now lacks a "comma", as the combination "dot+comma" is assigned by the system to switch between layouts.
Is there any solution to re-assign the layout sequence, or to assign "Shift+comma" to print comma (currently Shift does not have any influence on that button on my system...)
Awesome solution.Works like a charm. Can not imaging a better solution. A++++
Fixed permanently?
Cool!
Will this work after hard reset? If not, anyone dare to create a new ROM so that we can flash it and fix it permanently?
Rocks!
hello
I have qwertz keyboard and italian rom
which value i must insert?
tnks a lot
i can try to insert locale key, but when i do soft reset locale it became a directory...
why? i don't understand
the page where i sow the references is because the other doesn't work
http://www.microsoft.com/globaldev/reference/win2k/setup/lcid.mspx
Well, after I installed it, it doesnt default to Xt9 any more when I go to new messages
Sweet!
can't find this, can you send the link?
this is fantastic!
what ROM are you using ? will this work with any ROM (and ROM language) ?
i would appreciate the link also!
here is the cab file, it's actually just a registry setting fix.
HTC-DUAL-TOUCH-XT9-TO-ABC-FIX
The registry concerned is:
Code:
[HKLM\SOFTWARE\Tegic\eT9\IME]
CarrierDefaultTextMode=dword:0
(0 for ABC / 1 for XT9)
A friend gave me this link as I am also having a problem with the HTC site.
Enjoy!
oh my god it works !!!!
i cant believe how simple that was !!! thank you so much for the registry entry, i can use my phone to text again !!!
it's great!
this was the most anoying thing on my new dual.
tx a lot,
pirlone
Doesn't work for me
in fact it screws my device up!.. it shows the ABC being as the default input, but I can only type the first letter in each key, multiple presses just repeats the same letter
I guess I will have to reflash the OS.. otherwise I now cant use the text input on the keypad anymore!
works on mine. thanks, dtm for letting me know about this.
Maybe doesnt work on mine becos Im running the WM6.1 Nikki project OS ??
Anyone else that has installed this using this Version?
Can you help me? I am begiiner having Dual 2 days. XT9 is really anoying esp for NON english users.But I cannot fix it as it is described. Can you show me step by step what to do? Thanks
It does not work for me!
muzikfreakah said:
Well, after I installed it, it doesnt default to Xt9 any more when I go to new messages
Sweet!
Click to expand...
Click to collapse
Please help me. I am a new user having Dual 2nd day. I was trying to install it but it does not work. Can you describe step by step for the beginner what to do? XT9 is realy anoying esp for NON english users.
Hi, just copy the cab to the phone and install it. Maybe you need to softreset your Niki. (open the battery case, the reset button is left to the USB connector).
Cheers
Michael
I love this and it is working well for me. My only issue is when using the touch keypad software, when you type it highlights the letters and take a few micro seconds to move to the next so if I am typing a sentence, and press space,it deletes that entire word or atleast the last few letters that I typed :-( So the only way to solve this is not text that fast or use the hardware keypad.
Wow I noticed so many people reposting this when this was posted a long time ago.
Anyway, just wanted to confirm this is working on my wifes elf also
Finally there's something to kill XT9
Change Mode from ABC to XT9 or XT9 to ABC.
Hey everyone!
First, I wanted to start out thanking muzikfreakah for the link to the .cab file and the posting the Registry path that needs to be modified. I used these as a base reference for the work I completed on my phone. Instead of wanting to go from XT9 to ABC, I wanted to change my phone from ABC to XT9.
Initially I used PHM Registry Editor to make the necessary change to the Registry value you noted. Shortly thereafter, I updated my ROM to WM 6.1 so I had to reapply the settings manually. This got me thinking. Why not just create a quick .cab file for myself, saving me time in the future. This is exactly what I did!
Attached are two .cab's I created a while back (just never got around to uploading them). The first .cab (SP_Default_ABC_To_XT9.cab) modifies the appropriate Registry Key, setting it to 1 (defaulting to XT9). The second .cab (SP_Default_XT9_To_ABC.cab) does just the opposite, changing the value to 0 (defaulting to ABC).
Final notes before I part -
File Sizes: The file size of each of my .cab's is 1.07 KB, as it only contains the necessary Registry Key change. The link muzikfreakah provided brings you to "HTC+Touch+Dual-default-ABC.cab". This file size is 20.76 KB, as it appears to use a more complex method of making the necessary Registry changes.Company and Application Name: After my .cab is installed, it will display in the Installed Programs list as "Seth_Polley Default_XT9_To_ABC" (or vice versa depending on .cab used). After installing the other .cab (HTC+Touch+Dual-default-ABC.cab), the following is displayed in the Programs list: "Customization Customize_Tool".
In summary, either file will work for changing from XT9 to ABC. While 20.76 KB is nothing by today's standards, you can go smaller yet by using my .cab's (about 1/20th of the file size). Additionally, my .cab's provide a more descriptive name in the Programs list. Pick your poison! To 'install' the Registry modification, simply move the .cab to your phone, execute it, and follow the prompts.
Feel free to PM me if you have difficulties accessing/downloading the files. If you are concerned about using my files, feel free to open the .cab (can use an application like WinRAR) and review the contained "_setup.xml" file to verify this .cab will only make the changes I noted above.
Best Regards,
Seth
[Verizon HTC Touch (xv6900), currently running WM 6.1]
-=-=-
muzikfreakah said:
here is the cab file, it's actually just a registry setting fix.
HTC-DUAL-TOUCH-XT9-TO-ABC-FIX
The registry concerned is:
Code:
[HKLM\SOFTWARE\Tegic\eT9\IME]
CarrierDefaultTextMode=dword:0
(0 for ABC / 1 for XT9)
A friend gave me this link as I am also having a problem with the HTC site.
Enjoy!
Click to expand...
Click to collapse
Thanks ))
Thanx Man, I´ve searched this simple thing so long time...
Cheers Mate!!
I can now send SMS's again after unlocking!!
Simon
Question:
ok, so we only have about 30 shortcuts on our programs tab right? well i added more, so now i have up to 51 shortcuts on my programs tab. i click on the extra ones added and everything goes well until after selecting a primary program to add, it doesnt add.
this is what i did.. maybe i missed a step!
Open Regedit and i went to the following root
*HKLM\Software\HTC\Manila\ProgramLauncher.
i created new folders 31-51 and inside each folder i created the following strings and dword:
String Values Name: Command
String:
String Values Name: DispName
String:
String Values Name: IconPath
String:
String Values Name: Path
String:
DWORD Value Name: IsReadOnly
Data : 0
Then i went to the following root:
*HKLM\Software\HTC\Manila\ProgramLauncher\totalIte mCount.
and i changed the DWORD Data to 51.
i Restarted my phone and i stopped there.
Please advice cause this would be pretty badass if we can keep adding to our programs tab
If you search there is a cab that will set this up correctly, not sure where you've gone wrong, but the cab might fix it!
Gordon
i searched for said cab and couldnt find it... id love to be able to add more programs, esp ones that arent in the default program group.
As I've started to recover from the distress of the touch screen on my TP2 breaking and am in a slightly better mood! I thought I'd find the link http://forum.xda-developers.com/showthread.php?t=534596 is what you're looking for.
Gordon
I tried this cab and it doesn't fully work...
I see the 20 new spots in the program tab, but I can't add any programs on those new spots either. I select a program but it is not added
vakbrain said:
I tried this cab and it doesn't fully work...
I see the 20 new spots in the program tab, but I can't add any programs on those new spots either. I select a program but it is not added
Click to expand...
Click to collapse
thats the same problem that i have. everytime i select a program to the selected shortcut it goes back to the begining and it wont add it.
hey thanks for the support i appreciate it..
GordonTGopher said:
As I've started to recover from the distress of the touch screen on my TP2 breaking and am in a slightly better mood! I thought I'd find the link http://forum.xda-developers.com/showthread.php?t=534596 is what you're looking for.
Gordon
Click to expand...
Click to collapse
thanks for your time. ok so i took a look at the link and i havent tried the cab due to the fact that i spend a while manually adding the files in my registry but i did read there post and they did say you have to manually add the program through the registry.. so im going to try it and i will get back to you guys!
Example from the link:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLaun cher\30]
"DispName"="Total commander"
"IconPath"=""
"IsReadOnly"=dword:00000000
"Path"="\program files\tcmd\totalcommander.LNK"
so what im going to do that way you guys can try it if you want is the items in green are the items we will need to add manually.
kano69 said:
thanks for your time. ok so i took a look at the link and i havent tried the cab due to the fact that i spend a while manually adding the files in my registry but i did read there post and they did say you have to manually add the program through the registry.. so im going to try it and i will get back to you guys!
Example from the link:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLaun cher\30]
"DispName"="Total commander"
"IconPath"=""
"IsReadOnly"=dword:00000000
"Path"="\program files\tcmd\totalcommander.LNK"
so what im going to do that way you guys can try it if you want is the items in green are the items we will need to add manually.
Click to expand...
Click to collapse
Ok i Just tried it and it was successfull.. after you manually add the program on to the shortcut "Add" on your registry then due a quick restart and programs will show.
It sucks that you need to spend time on it doh..
I found the way to make the cab fully working... It missed a key to be modified.
Here's what I did :
1- Install the cab (http://forum.xda-developers.com/attachment.php?attachmentid=202860)
2- Modify this key using a registry editor (ex.: task manager) :
[HKEY_LOCAL_MACHINE/Software/HTC/Manilla/ProgramLauncher]
"totalItemCount" (hex value) = "50" (it was 20)
3- soft reset ... that's it
With this simple modification, the + button are now fully working !
vakbrain said:
I found the way to make the cab fully working... It missed a key to be modified.
Here's what I did :
1- Install the cab (http://forum.xda-developers.com/attachment.php?attachmentid=202860)
2- Modify this key using a registry editor (ex.: task manager) :
[HKEY_LOCAL_MACHINE/Software/HTC/Manilla/ProgramLauncher]
"totalItemCount" (hex value) = "50" (it was 20)
3- soft reset ... that's it
With this simple modification, the + button are now fully working !
Click to expand...
Click to collapse
i dont think is works for the t-mobile version. cause its doing the same thing to me. i havent tried it until now, everytime i click the + button and select a program for it. it takes me back to the top of the page and does not add.
not working for me too,i have 50 shcts on display but a cant add programs even after soft reset,sorry,can you maket work .thanks
Hi,
My LEO has english ROM and Its obvious that all of the apps and stuff is in english - and thats fine for me - i want it that way.
But when typing a message I would like my LEO to use polish language dictionary (useful to Spell Correction, to Word Completion
[XT9] and so on).
I know that it is possible to set different language for text input, but when I open the list of languages to choose from, I see: german, french, etc. but NO polish;/
Does anyone know how to deal with this? How to get polish lang on the list?
install a registry editor and go to
HKEY_LOCAL_MACHINE/Software/Tegic/eT9
click AvailableLanguages and add 0115 to the end of the value like:
0109,010C,0107,0110,010A,0115
then go to
HKEY_LOCAL_MACHINE/Software/Tegic/eT9/LdbFiles
and add a new String value named 0115 with a value of PLlsUN_xt9.ldb
then go to
HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\LanguageKeyBoardIDMapping
and add a new String value named 0115 with a value of 0915
reboot your device...
It will be there CZ or SK too ?? ? ? Thanks CLEVER MAN ! !!
I think Slovak is 011B, SKlsUN_xt9.ldb, LanguageKeyBoardIDMapping 091B
but I haven't tried so I'm not sure..
Also not sure CZ is in there.. there's no .ldb file with CZ or something.. any ideas what it might be called? I think the code should be 0105.
if the ldb file is there it should be located in the windows folder
bel_z_bub said:
I think Slovak is 011B, SKlsUN_xt9.ldb, LanguageKeyBoardIDMapping 091B
but I haven't tried so I'm not sure..
Also not sure CZ is in there.. there's no .ldb file with CZ or something.. any ideas what it might be called? I think the code should be 0105.
if the ldb file is there it should be located in the windows folder
Click to expand...
Click to collapse
Here is a list of Windows Mobile region codes. Hope it helps.
bel_z_bub said:
install a registry editor and go to
HKEY_LOCAL_MACHINE/Software/Tegic/eT9
click AvailableLanguages and add 0115 to the end of the value like:
0109,010C,0107,0110,010A,0115
then go to
HKEY_LOCAL_MACHINE/Software/Tegic/eT9/LdbFiles
and add a new String value named 0115 with a value of PLlsUN_xt9.ldb
then go to
HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\LanguageKeyBoardIDMapping
and add a new String value named 0115 with a value of 0915
reboot your device...
Click to expand...
Click to collapse
Thanks for help.
I followed Your guide but I still seem to have a problem.
I opend text editor right after rebooting my device. I set language to Polish, turned word prediction on and started typing. I entered 1 word and clicked space button to start typing second word. And from this moment my device is not responding (I had to perform restart). I tried it for about 5 times - always thesame reaction.
So I performed hard reset, set device language to Polish (previously i had English). When my Leo was ready I changed the registry according to Your instruction and restarted the device. From that moment my Leo is restarting all the time long. I had to remove the battery and do the hard reset to make it work again.
Do You know what could cause the problem?
slefn said:
Thanks for help.
I followed Your guide but I still seem to have a problem.
I opend text editor right after rebooting my device. I set language to Polish, turned word prediction on and started typing. I entered 1 word and clicked space button to start typing second word. And from this moment my device is not responding (I had to perform restart). I tried it for about 5 times - always thesame reaction.
So I performed hard reset, set device language to Polish (previously i had English). When my Leo was ready I changed the registry according to Your instruction and restarted the device. From that moment my Leo is restarting all the time long. I had to remove the battery and do the hard reset to make it work again.
Do You know what could cause the problem?
Click to expand...
Click to collapse
I just checked to add Polish but it works perfectly for me.. maybe check your spelling with the .ldb file and check if the file is present in the windows folder.. is it an original ROM?
When you set your device to polish (multi language device??), did you check if the dictionary was maybe already there before you changed the registry? A polish device should have a polish dictionary standard you should say..
Well it works (wejdz w jakies pole textowe->klawiatura->trojkat przy klawiaturze->ust wprow texty->wlacz sprawdzanie pisowni) type kocham then press it to keep it save on word list then type koham and you should be able to choices between both words. Correct one will be at center in order to press space to accept(space soft key).
Unluckly you have to type words by your own to have it in xt9
It loock like not all language could be activatet.
I try to do that for Ukraine but no result.