Database Users

Pocketplus theme change?

I have installed Pocketplus 3 on my Wizard and it work great after disabling the saft boot "feature".
I tried to change to some of the theme preinstalled with pocketplus 3 to change the indicator icon without any effect.
Anyone has any luck using anything other then the default theme?

spectra128 said:
I have installed Pocketplus 3 on my Wizard and it work great after disabling the saft boot "feature".
I tried to change to some of the theme preinstalled with pocketplus 3 to change the indicator icon without any effect.
Anyone has any luck using anything other then the default theme?
Click to expand...
Click to collapse
I have the same problem.. only workes if u send the .tsk file to eg my documents and installs it from there.. so far.....

On my Vario, the themes show up in the Today options, but selecting them does not load them. The theme is still Windows default, or one of the other ones that came with the phone. Too bad, wold have liked to use the same theme I was used ot on my magician. How des installing them from another folder ( like my documents) work? just copy them there? But how to select them then?

I have finally find a work around solution from another forum.
http://www.aximsite.com/boards/showthread.php?t=106316
Here is the extract:
those who are having problems installing themes. sbsh had a workaround. goto settings/today and highlight the theme you wish to use. locate the tsk file and copy to root. rename tsk to cab. install the file. goto settings/today/items exit. it seems to work without problems.
I just tried this method and works. Hope this help with anyone that is using PocketPlus.

[Updated 24/10/07] New Ver TouchCube + Flash Lite worked with Hermes

WOW, this new development using Flash Lite 2.1 and TouchCube version`(Alpha - DEMO ) is very impressive- smooth, fast and working with DPAD, and most important REAL Touch on Hermes. Can't wait for the Final version. Enjoy it
Here's the link for the alpha v2 http://forum.ppcgeeks.com/showthread.php?t=6938&page=9
and for flash Lite 2.1
http://adobe-flash-lite.en.softonic.com/pocket
and for the Cube config file http://forum.ppcgeeks.com/showthread.php?t=6938&page=8
Edit:I will remove the attached files if the Original Authors do not want me to post them here. Original post only linked to the PPCgeeks site forum.
13/09/07 - Add new zip file for SMS V2_W_SMS.zip - MUST install the original files first, then unzip, overwrite contents with SMS files. Note: when tap on the SMS button- use the left side of button ( tap on center button will exit to clock screen ).
04/10/2007 - Update new Cube Launcher v2_real.zip - 12 contacts, remove demo, improved features. etc... as per Byka post http://forum.xda-developers.com/showthread.php?p=1557000#post1557000 Post #104. Enjoy it
In this attachtment the cube :
-rotating realtime (when you pull your finger)
-invoke the cube: drag the finger bottom to up (on the mainscreen, is you not keeping that)
-remove the cube: drag your finger up to bottom.
-This version comprise the 12 contacts , real and refresh datas look the signal and battery icons (colored yet, this relevant me beetwen test).
-this version not comprise the sms imput panel, but I removed the "sample message" text.
-lack now vibrate icon.
-removed the Demo texts.
Next release: Button on the mainscreen for you fauvorite ScreenLock program.
The SMS write panel finished, but I testing yet, I liking preference the t9 looked panel here big buttons. (abc2...def3...)
10/10/2007 - Add new version cube_real_edited.zip as per Byka Post #117. Unzip, copy over existing installation and Enjoy .
24/10/2007 - Add new version from Byka post #143
Cube v_2.1 + selectable MainScreen_w_Digital clock +Config12_background + efrost MINIMIZE.exe + notyfi.mscr for Mortscript.
WARNING! The all files default folder on your PPC in the Main Memory:
../Program Files/Szabi/CubeLauncher
In the new Page1.txt config file add some variables:
&Timeformat=24& //digital clock hourformat
&Vibra=off& //not avaible
&MainScreen=off& //If you like keep to the MainScreen ==>
&Minimize=on& //apply the MINIMIZE command only, not will be exit the cube, when that invisible
&Name1=Contacts &Command1=".. //etc... etc...
If you like apply the MainScreen the missedCalls and the missed SMS indicators (or FGA's super mainscreen) you need prev. installed (and one running) MortScript.
If you like apply EFROST's super FTouchFLO applycation starting the my cubefrom default TODAY screen, you need the FTouchFlo folders write any settings in the settings file:
...
DownUpApp:/Program Files/Adobe/FlashLite/saplaywm.exe
DownUpAppCmdLine:"/Program Files/Szabi/CubeLauncher/Cube2.swf"
...
Speed and easy. I hope this help for you.
BR!
ByKa

Looks very good!

well its alll we got nice 1
gonna try looks ok,
jdac21

just installed it...and it works great!!!!

does it works with wm6?

dahool said:
does it works with wm6?
Click to expand...
Click to collapse
Yep, I've installed in my Hermes with WM6 and it's working with all features- including Sliding with your finger (REAL TOUCH).

pl55 said:
Yep, I've installed in my Hermes with WM6 and it's working with all features- including Sliding with your finger (REAL TOUCH).
Click to expand...
Click to collapse
i confirm works great ,
jdac21

Could some one send-me flash Lite 2.1 please.. in that link it says: "Site Area Temporarily Unavailable"
[email protected]
PlZ!! ^^

dahool said:
Could some one send-me flash Lite 2.1 please.. in that link it says: "Site Area Temporarily Unavailable"
[email protected]
PlZ!! ^^
Click to expand...
Click to collapse
check your email
and enjoy the file attached

Thank you a lot!!! lets test it xD

dahool said:
Thank you a lot!!! lets test it xD
Click to expand...
Click to collapse
"DE NADA"
EDWARD

too nice!!!
I'll wait for the full version!!
anyone knows when it comes out?

how do i install this
i cant figure wich ones i need to install

mr_nonshalant said:
i cant figure wich ones i need to install
Click to expand...
Click to collapse
OK , Here's what I did:
1. Install Flas Lite 2.1 for PPC WM5 Cab into Main memory.
2. Install Szabi cab launcher cab to main memory
3. Copy Cube config directory to same directory as cube launcher
4. run cube config exe to config cub screen - Hint: save change after fill each screen ( there's a bug in the config that did not save properly)
5. Launch the cube and enjoy.

thanks for posting! This is a very cool high tech addition to the Hermes!

My screen is blank. Just the clock and beautiful girl. But no icons. I didn't really get into configuring it yet but I thought it would just open and run. anyone know where I am tripping up?

afguard17 said:
My screen is blank. Just the clock and beautiful girl. But no icons. I didn't really get into configuring it yet but I thought it would just open and run. anyone know where I am tripping up?
Click to expand...
Click to collapse
I have since uninstalled this, but I believe you first touch near the top of the screen, near the clock. The clock will disappear. Once the clock disappears, swipe from the very bottom of the screen to the top. That should bring up the cube.

pl55 said:
OK , Here's what I did:
1. Install Flas Lite 2.1 for PPC WM5 Cab into Main memory.
2. Install Szabi cab launcher cab to main memory
3. Copy Cube config directory to Storage card ( to save memory)
4. run cube config exe to config cub screen - Hint: save change after fill each screen ( there's a bug in the config that did not save properly)
5. Launch the cube and enjoy.
Click to expand...
Click to collapse
thanks for the instructions on using the new additions!

Here're some of the icons you can use, and a new background jpeg file ( if you don't like existing one ). Have fun

Anyone have a link to the config file? I got the other two main files from here...
http://forum.xda-developers.com/showthread.php?t=328010
However, they don't seem to have the config file, and I don't have a pocketpc geeks account to download the config.

HTC Touch Cube-- Easy One-Touch Install Version

20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Device Compatibility
MIO........A700.......WM5.........Work QuickDial.exe Dead
Asus.......535.........WM6.........Work QuickDial.exe Dead
Dopod.....P800W.....WM5.........Work QuickDial.exe Dead
MIO........A501.......WM5......... Work QuickDial.exe Dead
CHT........9100.......WM6..........Work
AT&T......8525.......WM6..........Work
HTC......TYTNII......WM6..........Work
Dell......Axim X51V..WM6..........Work
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616

Can you please post device compatibility list or is this for a specific device only?
Regards,
Carty..

Thanks man I will try it

let me try it. thx

Mirror please!

here is the mirror.
hope it is useful. maybe u can put it in the 1st post to make it easier?
thanks.
http://w14.easy-share.com/11341771.html

I know it's probably covered somewhere, but with so many posts on the Cube and FTouchFlo, I can't find it.... How do I get the gesture system to work on HTCAlbum after installing FTouchFlo? It's in the list of exclusions properly, but the gestures no longer work; even if I disable FTouchFlo and soft-reset my Kaiser.

Sorry guys. Is the attached file corrupted or not complete?

leo2016 said:
20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616
Click to expand...
Click to collapse
Will this work on square screens (240x240)

Works really well, thank you!

I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?

I may have to try this once the results are in....

mauce said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?
Click to expand...
Click to collapse
i think the same thing happen to me.

T3D0nG said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Click to expand...
Click to collapse
Readme
# Please Remove Any VER FtouchFlo、FTouchFloConfig
# Please Install HTC HOME
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC

WM5
Does this work with wm5 standard oem rom devices?
Is it the original Cube?
Is the media player interactive?
Will have efrosts touchflo installed affect it?
Thanks

It works! I followed all of the instructions in the readme file: Removed the touchflo that I already had on the device (For removing previous touchflo versions: I had my old touchflo in the start up menu in windows, and was having trouble getting rid of it since it was already running. So I cut and pasted touchflo to a different folder, soft reset, and was able to delete it so it wasn't running at start up anymore), already had HTC Home on there, installed the cab installer, went into the touchflo config file and enabled touchflo, did a soft reset, and it works perfectly.
...only thing is the "New E-Mail" and "SMS/MMS" tab seems dead, but it still works from HTC Home.
The "contact" side takes a couple of seconds to come up but thats expected. Everything else works like a charm. Easily the best one-stop .cab installer of the Touch Cube that I've tried so far.
Thanks for the post.

...sorry....I forgot:
It works fine on my AT&T 8525, WM6 offical AT&T Rom. Thanks again!

If you had FtouchFlo installed previously, make sure you delete the exe file from /Windows/Startup and leave the one from the cab installation. My cube worked after that.

ADD Device Compatibility

Works great here. I'm using a Blue Angel running xplode's latest WM6 ROM.
Thanks for the great work!

Having some Q and ned help !!!

1-what is ROM ?
2-if it put tf3d rom or another it will delete all files in the system ( like hard reset ) ?
3-is tf3d is like a panel ( spb mobile shell ) or will delete windows mobile system?
4-what is GeoTagging in camera ?
thanks

From what ive gathered by using roms my self... i have found the following:
1. What is a rom?
it is basically the thing that make the user interface look the way it looks. The default windows today panel is the default rom which the phone comes with. TF3D rom will replace that and make it look like a HTC Touch HD. you can install it as a panel by following this link-
http://forum.xda-developers.com/showthread.php?t=441439&highlight=tf3d+panel
Download TouchFlo3D on Xperia X1 cab and TouchFlo3D as Panel Installer Installer.
Install TF3d first, softreset, then go to settings, today, items and untick every thing. then soft reset.
Now install TF3d panel installer. soft reset. then just choose the panelas younormally would.
2. A rom will edit certain windows files to make it look and behave in a different way, but it would still be the windows interface. if you install another rom, it will erase all files on phone. and replace certain windows files.
3. see q 1
4. Dont know what geo tagging is??

thanks alot
but when i install the tochflo 3d beta 3 and made everything then when i press on the panel it writes to me loading in a white screen and notheing occure ??

The new ROM TouchFLO Today softkeys different from previous version

Hi all,
When I purchased my Touch 3G from Singapore (Starhub) last week with the factory ROM the Today Screen with TouchFLO was showing "Programs" as the right softkey and the programs had the audio manager.
Once I upgraded the ROM to latest provided by HTC website for Asia WWE released date 2009-04-17. The right softkey is replaced by "Camera" and the Audio Manager Icon is not present in the programs.
Is this a bug or feature?
I really liked the old setup and was wondering if anyone knows how to replace the "Camera" softkey back to "Programs" and include the Audio manager icon into the programs.
Or if someone out there has the old version of the ROM.
Appreciate all the help.
Regards

Hi Buddy,
You have to add or edit the Registry Key
You need Registry Editor
1. Go to HKLM\Software\HTC\manila2D\Home\
2. Edit or add SK2 = "Your Own Text"
3. Edit or add SK2Cmd = "\windows\AudioManager.exe"
4. SOFTRESET
It work for me.

Correct me if I'm wrong but I think you cannot go back to the older ROM once you upgrade to the new one. I remember reading it on the download site.

i update my jade too ... it still work with the new rom just add or edit the Registry Key.

I posted the issue to the HTC tech Support, it seems they are calling this the new feature, the new upgraded ROM will have the Camera as default.
The softkeys should be configurable as default.
Had installed M2DC to configure the keys to any application, works like a charm.
But there is no way to get the Manila 2D Program folder to be configured. Anyone out there knows please post the solution.