Hi there,
I'm looking for some information about what i would need to do to get a USB device recognised on my x7501. I'm looking to connect a USB-to-UART bridge chip (FT232RL or something) to the device so I can essentially have a serial/COM port on my phone, which i can use for data logging.
I was wondering if anyone's had experience with anything like this so i could find out:
A) what devices are already supported in WM6, as the bridge chips can mimic a virtual com port via built in windows drivers but im not sure if this driver is in windows mobile
B) what i would need to do to setup for dev for writing WM software and the driver if necessary (i have visual studio, i think there is a WM emulator but im not sure totally?)
C) any other questions you think are relevant to my goal
thanks in advance,
sebastian
Related
Hi
Has anyone heard something about PXE booting from Shift PC, or how to com in the Bios. We want build the Shift PC automatic with OS Deployment Tool.
Thanks for all the info.
Röndi
PXE boot is not possible - remember, the Ethernet port is not embedded, but just an USB attached device. Of course, you could create an bootable USB stick that provides a kind of USB support, assuming the necessary drivers for the ethernet port in the USB Hub are available (but in fact, i really doubt so).
OK Thanks i will try it
Hi,
I have a bespoke usb device that "in theory" should report as a HID keyboard.
The device works correctly on vista/mac. But I cannot get it to work on the ameo with the R6.1 MiChy ROM (or earlier versions).
Looking in the registry editor (on the devices tab) the usbhid.dll and kbdhid.dll is loaded, but I am unable to type anything on the keyboard.
I have asked in the windows mobile forums on msdn for ways of debugging, they recommended using the wince platform builder. It's a great recomendation, but also v.expensive.
I'm pretty certain it's my dodgy firmware that I have written, but it's proving v.difficult to debug.
-thanks for the help
Hi all im a bit of a win mobile newb and just bought a uk HTC HD2 so have a few queries.
Normally i would apply google but given how new win mob 6.5 anf the HD2 are and the discrepancies between it and older versions i am finding i a bit tough finding info.
Any advice or links would be appreciated for the following questions.
1) can i install full flash on a web browser and is so how
2) is there an ssh client i can install
3) there is a .net 3.5 framework out but it wouldn't let me install from the phone or give me the option to isnt all while connected to windows mobile device centre, is it already setup or a way it install it.
4) divx support, where can i get it?
5) Host usb, i believe there are some drivers and a special cable needed, anyone tried this, any hints where to get the cable and if the drivers work?
6) any places that have good engineering apps and .net apps i can play with.
your assistance is appreciated, im more of a *nix bod so am beginning to think i would be happier on the n900 if it wasnt so thick and was ever released but its only been 2 days.
If anyone is thinking of getting and HD2 wants me to check any software out just ask.
epz123 said:
Hi all im a bit of a win mobile newb and just bought a uk HTC HD2 so have a few queries.
Normally i would apply google but given how new win mob 6.5 anf the HD2 are and the discrepancies between it and older versions i am finding i a bit tough finding info.
Any advice or links would be appreciated for the following questions.
1) can i install full flash on a web browser and is so how
2) is there an ssh client i can install
3) there is a .net 3.5 framework out but it wouldn't let me install from the phone or give me the option to isnt all while connected to windows mobile device centre, is it already setup or a way it install it.
4) divx support, where can i get it?
5) Host usb, i believe there are some drivers and a special cable needed, anyone tried this, any hints where to get the cable and if the drivers work?
6) any places that have good engineering apps and .net apps i can play with.
your assistance is appreciated, im more of a *nix bod so am beginning to think i would be happier on the n900 if it wasnt so thick and was ever released but its only been 2 days.
If anyone is thinking of getting and HD2 wants me to check any software out just ask.
Click to expand...
Click to collapse
No: 3 I had to download a file named "NETCFSetupv35.msi" when connected to activesync then run the msi file on your pc.
No: 4 Coreplayer is the program you want
http://forum.xda-developers.com/showthread.php?t=587100&highlight=coreplayer
hi everyone
i have a problem witch i want to share
well i have drivers of a USB to COM Port witch install correctly in all Win 9.x and win 7 and vista
here is that drivers
Code:
rapidshare.com/files/361640744/Driver.rar.html
I want to install these drivers in windows mobile 6.1 to have Com port in my mobile OS.
in that case, i can use a couple of API that we have to develop a robotic project.
if you have any solution in mind, please share with me
many thanks in advance
Mohsen
you are funny. it's not possible to install such drivers on windows mobile. of course you need special drivers for WM. besides that, most WM phones don't have the hardware requiements to allow you to connect any usb periphery on them.
Don't know what you want to do...
Check wm5torage and Zeno USB Host Drivers... Maybe the devs could provide some info...
Hi,
I have a Samsung Omnia Pro B7320 handset, that wrongly upgraded to At&t Windows Mobile 6.5 that was developed for Samsung Jack by me and started malfunctioning... ! LED flashing, no battery charging, some keys not working &....
This story is for about 4 years ago. On that time I searched for a solution to get it back to its original ROM but my attempts were unsuccessful. So I dropped it in drawer.
Now I decide to use it as an ARM board like raspberry with Linux or Android. Is any one can help me?
I searched in the net but found nothing. There were some solutions for some other Windows Mobile devices, but not for B7320.
Here I want to clear that I don't want to use it as a mobile phone, so it is not important that some drivers will not be working...
All I want from this device is an ARM processor board with USB that make me able to access its OS via any type of connection.
Thanks
the following devices
http://pdadb.net/index.php?m=pdamaster&posted=1&cpu=a7225
share the same chipset with your phone. you can find a ROM matching your chipset and try to port it to your phone.
type some of the phone models to xdaforum or on google and try to port.
some basics on how to port you can find typing "android porting" etc on google
because your phone has win mobile you need haret to boot your android ROM
hope i helped