I'm using vista home and have flashed many a rom on my hermes with wmdc after following the steps here:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
My problem is i can flash my hermes but not my wizard.
I get MFC application has stopped working.
Anyone point me to why this is happening as when i've searched the results point to doing the above?
Bump
Just a quick bump see if i get lucky?
Im using Windows Server 2008 64bit so vista modem drivers n stuff are no go.I know how manually select the drivers, but windows just says they are incompatible (INCOMPATIBLE, not up-to-date or anything else - windows just says they perhaps arent good for x64 etc even for the 64bit ones).
So here is what i done and what WILL WORK ON ANY SYSTEM - from win 2000 to win server 2008 64bit or windows 7 beta or whatever your using.
Install vmware (i used VMware Workstation 6.0.4 Build 93057)
Install WinXP-SP2/3 on it
make sure the usb device is selected on the top of the vmplayer.
install activesync, sync the phone.
install .NET FRAMEWORK 2.0 OR NEWER
start the ruu wrapper
flash & enjoy.
no need for crappy drivers, just install vmware, flash, uninstall vmware.thats all.
Hi there,
I'm looking for some information about what i would need to do to get a USB device recognised on my x7501. I'm looking to connect a USB-to-UART bridge chip (FT232RL or something) to the device so I can essentially have a serial/COM port on my phone, which i can use for data logging.
I was wondering if anyone's had experience with anything like this so i could find out:
A) what devices are already supported in WM6, as the bridge chips can mimic a virtual com port via built in windows drivers but im not sure if this driver is in windows mobile
B) what i would need to do to setup for dev for writing WM software and the driver if necessary (i have visual studio, i think there is a WM emulator but im not sure totally?)
C) any other questions you think are relevant to my goal
thanks in advance,
sebastian
i know that is old drivers, but my rom need superruu to flash it.
now, superruu only can support this version of drives.
and i have Microsoft USB Sync Ver.4.0.4232.0 for x86, drives date is 2004/10/6, i can flash my rom on 32bit windows...
but i want to use the 64bit system....
so, i need Microsoft USB Sync 4.0.4232.0 for x64...can anyone share it?
up up up.....
up up up.....
i have a lenovo windows 7 laptop and im trying to do a nand installation
the problem is that i have installed all the necessary drivers plus htc sync plus windows mobile sync plus android usb drivers from googlesource 175 and its just not working for me the bootloader!!!!!
is there anyway that i can do a fix or something???
Supracer said:
i have a lenovo windows 7 laptop and im trying to do a nand installation
the problem is that i have installed all the necessary drivers plus htc sync plus windows mobile sync plus android usb drivers from googlesource 175 and its just not working for me the bootloader!!!!!
is there anyway that i can do a fix or something???
Click to expand...
Click to collapse
Looks like your list of drivers for the phone
- Drivers (necessary/required) dont know what you meant, but I count that there is something
- HTC drivers
- Windows drivers
- Android drivers
First, uninstall all drivers for the phone, of course reboot is needed after that and then install these two: Windows Mobile Device Center and android drivers
Windows Update
After run HARET_PHOTON7227 and have fastboot screen, plug phone on usb and configure windows 7 to find drivers on Windows Update and install.
Hi, is it possible connect WIN CE with WIN 10(1909)?
I use Riftek PDA(Railway Wheel Profile Gauge IKP,IMR, IDK) with WIN CE 6.x...but problem is with connection via WMDC. PC just ignoring connection. I try WIN 7 in VB, but no lucky too. Please, can somebody help me with this? I need connection with PC for download and back up data from measuring.
https://riftek.com/eng/products/~show/instruments/railway-devices/railway-wheel-profile-gauge-ikp
erik.aragorn said:
Hi, is it possible connect WIN CE with WIN 10(1909)?
I use Riftek PDA(Railway Wheel Profile Gauge IKP,IMR, IDK) with WIN CE 6.x...but problem is with connection via WMDC. PC just ignoring connection. I try WIN 7 in VB, but no lucky too. Please, can somebody help me with this? I need connection with PC for download and back up data from measuring.
https://riftek.com/eng/products/~show/instruments/railway-devices/railway-wheel-profile-gauge-ikp
Click to expand...
Click to collapse
Don't use a usb 3.0 port, try a 2.0.
Did you try to run WinMo device manager in compatibility mode for Win7?
Mik-el said:
Don't use a usb 3.0 port, try a 2.0.
Did you try to run WinMo device manager in compatibility mode for Win7?
Click to expand...
Click to collapse
Problem is still continue. I try USB 2.0.
In windows 10 it was once connect with HTC Touch 2, what I try. But Riftek PDA still nothing. And HTC have too problem, after PC restart.
Win 7 in VirtualBox have problem too, with WIndows Mobile and CE connect. It wrote me error with USB sync driver, code 10. But driver install was from MS Update.
erik.aragorn said:
Problem is still continue. I try USB 2.0.
In windows 10 it was once connect with HTC Touch 2, what I try. But Riftek PDA still nothing. And HTC have too problem, after PC restart.
Win 7 in VirtualBox have problem too, with WIndows Mobile and CE connect. It wrote me error with USB sync driver, code 10. But driver install was from MS Update.
Click to expand...
Click to collapse
I've never had problems connecting my WinMo device to my computers.
Before WinMo device manager there was Active Sync, if I'm not wrong it works on Win XP only.
I don't use virtual machine very often, if I insert a usb pendrive to my pc I can't see it on my virtual machine obliviously, you need to change settings for the virtual machine and so on. In the worst case I suggest you to install a lite version of Win7 alongside the main Windows installation on your computer
Mik-el said:
I've never had problems connecting my WinMo device to my computers.
Before WinMo device manager there was Active Sync, if I'm not wrong it works on Win XP only.
I don't use virtual machine very often, if I insert a usb pendrive to my pc I can't see it on my virtual machine obliviously, you need to change settings for the virtual machine and so on. In the worst case I suggest you to install a lite version of Win7 alongside the main Windows installation on your computer
Click to expand...
Click to collapse
Yes I have not problem too, but last 2 update make big problems with WMDC under Windows 10. Only solution what I see is, found old NB and run Windows 7/8 on it.
Or is it possible run Win CE 6.x app from this PDA on WIndows Mobile device with WIndows 6..1/6.5? I try it, but i got error. But I think it with little editing it is possible run it. But how?
https://riftek.com/eng/support ->Railway Wheel Profile Gauge -> IKP-5 Software for PDA (from 2016) (2MB)