Not sure what happened, woke up this morning and my screen just decided to stop working. If I press REALLY hard, sometimes it will work, but I'm pressing to the point that I fear I'm going to stick the stylus right through the screen.
Any idea what could be causing this? There doesn't seem to be any noticeable damage or anything, the phone hasn't gotten wet.
Thanks in advance.
Can you get to the screen that will let you realign it?
Heh if he cant touch it how is he supposed to align it. Perhaps a hard reset, Mabey a program on the phone is doing something. Like touch-flo or sumthing if u installed it. U can do a reset by holding the 2 softkeys and pressing the reset hole with your stylus on the bottom of the phone near the memory card.
Related
I recently got hold of a disabled XDA and since then i have been reading your board intensively.
The unit boots. And i get a T-mobile -test- display. In the lower right hand corner there is a number like 4.21xxxx. After a few seconds in the same corner i get some more data. From there the unit does nothing.
As far as i know the walliby works fine. i can read/write to SD and i can also get the testing mode. All works fime except for the touching display.
If i use the stylus it does not respond, if i use my finger the "+" moves to the corners of the display.
What to do next? :
should i flash my rom to the original O2 settings
should i dive into the T-mobile reset as descibed in this board.
If a hard reset will solve it then fine ... or you will have to flash the ROM since the boot loader is still functioning
Thanks
Thank you, but how do i do a hard reset.
I know how to do the soft reset. putting the stylus in the hole with the on key pressed down.
Rien
in the buttom of the xda1 there is a small hole where you put in the stylus to do a softreset
on the other side of the connector there is another hole and some picture of a batt or something
that hole is used for hardreset
if you want to know more
stuff like this is all over hte manual
http://www.my-xda.com/onlineguide.html
I droped my MDA and now the top right button is stuck. When my phone reboots, it only shows a screen with all the colors on it. I can get around this by holding the left button and telling the phone not to hard reset. However, I really need the use of the button back. Does anyone know of an easy way to unstick a button.
Thanks
hi,
some of the hardware keys stopped working on my htc diamond...the only keys that work are. the power button, voluime buttons, up pad down pad and the center/ok button....everything else does not work, even the touch pad doesnt work...can any one please help me, OH and the buttons somtimes work for example when i somtimes press any button on the left side it will go to the home screen, for example when i press call button it will go to the home screen, same with the right side if i press the back button it will press the call end buton wierd eh? So basicly the buttons do respon (the litghts turn on when i press any hard ware button but they do not do anythin 99% of the time and if they do it is the wron function HELP GUYS!
Have you tried restarting the phone? Press and hold the powerbutten (if it works), and answer Yes to the question about shutting down. Take out your battery for 10 seconds, put it back in and fire up your phone... It might help
longice said:
Have you tried restarting the phone? Press and hold the powerbutten (if it works), and answer Yes to the question about shutting down. Take out your battery for 10 seconds, put it back in and fire up your phone... It might help
Click to expand...
Click to collapse
I have the same problem but it is only the home and answer buttons that stop working. If i do the restart it wirks but why should i keep having to do this
jsmith_00 said:
I have the same problem but it is only the home and answer buttons that stop working. If i do the restart it wirks but why should i keep having to do this
Click to expand...
Click to collapse
Hehe, can't answer that. I've had the problem only like twice in three months, so for me it's not a problem... I guess it's a software problem. Remember, it's not a Nokia The inside so much more complicated, so I guess we just have to live with some bugs...
Are you guys sure that this is a hardware related problem? I have the same prob and i was quite sure that i f**ked up the capacitative panel by playing kevtris manickly for quite a long time.
The capacitative screen is comprised by two parts folded.
I have opened the diamond and i found out that there is a lietle piece of metal that binds them together. This was bent(from kevtris probably) so istraightened it out with my bear hands. But it did not fix the problem. Do not try it anyway. Too messy if you have two left hands like me.
Have you ever seen a calibrator for the capacitative screen?
had the same problem only the power button would work , hard reset fixed it.
Have u installed S2U2..try uninstalling it...or install latest version 1.68 of S2U2
okay so my screen has broken, it is not cracked and i do not know what is wrong with it. When i do turn the phone on the backlight turns on but remains black and the actual screen does not when i do manage to unlock the phone even thou i can not see what i am doing i can still touch the touch screen to press buttons as i can feel the vibrating of pressing buttons.
What i really want to know is does anyone know what is wrong with the phone and why its doing this?
Thanks
My phone just developed this exact problem. At first the screen was offsetting the graphics half way up the screen, and hard resetting fixed the problem briefly. Now the screen stays black, but responds to touch and the backlight works.
Did you ever find out the cause, or a solution?
I have a tmous hd2, running a stock winmo and darkstone's new superRAM build.
I just found that a hard reset (hold vol. up + vol down and hit the reset button) fixes my problem.
Thanks xda wiki!
Well, today my screen failed again, in the same manner. Now a hard reset does not fix the problem. I am beginning to think it is a hardware issue. If I fix the problem or find another thread that addresses the issue I will post it here.
Good evening...
so I picked up a shiny new Note 3 today, and spent all night rooting it, installing SS, Beans 6, and setting up all my apps and whatnot. Not sure how I didn't notice it before, but suddenly I've just realized the power button sticks if pressed just so. Appears to happen when you press the power button with your finger on the lower third of the button. It's always a touch "sticky" for lack of a better word, but most concerning is that sometimes it will literally stick. Get stuck. In the depressed position. Only to pop up when you gently touch the top part of the button.
If I press in the middle or top half of the power button it works fine.
Anyone else have this issue? Any ideas on the cause? Can it be fixed or do I need a replacement phone? I'd really rather not have to go through all this again tomorrow with a new device, but not sure I can take the sticky button for the next two years and worried it might actually get worse if its a mechanical defect.
Thanks
EDIT: Taking the phone back in the morning. I am way too OCD to just "live with it". In the process of flashing the MJE file and unrooting. =(