I have notice that when my bluetooth headset connected to my Dual, you only notice the headset logo only on dialing mode and not shown on the task bar... why is that?? How to show it there on the task bar??
Second, after installing Tom's Rom, on the message which I had receive, I unable to forward it to other. The forward wordsing was not hightlighted. How to fix this problem as well.
Thank you for the assistant.
___________________________________________________________________
Since Dual is to have the cube menu.... why is it only 3 sided instead of 4?? How to make it 4?? or how to customize it into 4 side (which really is cube).
Thanks in advance again.
No one has this problem??
medowance said:
I have notice that when my bluetooth headset connected to my Dual, you only notice the headset logo only on dialing mode and not shown on the task bar... why is that?? How to show it there on the task bar??
Second, after installing Tom's Rom, on the message which I had receive, I unable to forward it to other. The forward wordsing was not hightlighted. How to fix this problem as well.
Thank you for the assistant.
___________________________________________________________________
Since Dual is to have the cube menu.... why is it only 3 sided instead of 4?? How to make it 4?? or how to customize it into 4 side (which really is cube).
Thanks in advance again.
Click to expand...
Click to collapse
Not searching the forums is just going to get you ignored!
Modify cube
My vario11 did the same with the headset when on both wm5 and wm6.
Related
...long time lurker; first time poster...
did a search on this once and if it's here, sorry i missed it:
what is the reg-locale for ensuring the Bluetooth System-Tray Icon is enabled to launch when bt is active. since performing the following reg-edits, it no longer appears.
Increasing font cache and screen performance:
"HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE"
Change "limit" from "8192" (default) to "16384"
Increase general performance:
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\"
Change "CacheSize" value from "0" to "4096".
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=0x1000(4096)"
Change "EnableCache" value to "1"
"HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\"
Change "ReplStoreCacheSize" value to "4096"
Enable Cleartype in landscape mode:
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
Change "OffOnRotation" to “0”
also... i did this one and then reversed it since i learned (after the fact) that cingular 8125 is already b/g:
Enable 802.11g:
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS
Assign a value of 1 to dot11SupportedRateMask
Assign a value of 8 to dot11SupportedRateMaskG
thanks to anyone making time to reply!
can someone confirm that their actually is a bt icon that resides in the system tray (top bar) when bt is enabled???
maybe it was a fluke that i actually saw it there for a brief period today?
maybe i'm seeing things?
I have not seen that icon in WM5. But I would like to have it there.
Oh its there alright. In fact, in the online help somewhere on my 8125 it actually lists the icons and their descriptions. One of them is the BT icon.
Its beyond my why there isn't an application that can indicate with a headset icon to notify you if your phone is paired to a BT earpiece. Someone had posted once PhoneAlarm did it, but alas. It does no such thing.
If anyone else knows of a program that will tell you if you're currently connected to a BT device, please speak now!
Ok, found out where the icon is listed. Go to the main WM5 online help on the device and go to Personalizing your device>Over of the Today screen>What do these status icons indicate?
Towards the bottom you'll see the icon... IT EXISTS IT EXISTS!... sigh
it does because today... it appeared for a moment. it played peek-a-boo while device was bugging-out. glad to know i wasn't seeing things. i wonder if having the clock reside in the sys-tray has anything to do with it???
i have found this application http://www.pocketpcfreewares.com/en/index.php?soft=1319 to at least show when the BT is on. It also tries to connect to a headset when there is an incoming/outgoing call. Not having a headset myself, I have not been able to test this function, but bt does turn on on a ring and turn off when I end the call.
i got this cab from somewhere here in the forum which shows the bt icon on the system tray, to allow you switch on/off bluetooth, i beleive it was designed for the universal but it works fine with my kjam (wizard).
majdi said:
i got this cab from somewhere here in the forum which shows the bt icon on the system tray, to allow you switch on/off bluetooth, i beleive it was designed for the universal but it works fine with my kjam (wizard).
Click to expand...
Click to collapse
Thanks! This .cab works great.
Now I only need the same type of icon for wifi. Anyone got such .cab file???
Works Great on KJAM JASJAR and EVEN A T O M !
Thanks.
I tried it on my k-jam but unfortunatelly... nada
I downloaded the cab file to my pc through the link, then copied the file to my devise and run the installation therein...
Am i missing something?
Weird
I installed this, and nothing happened, so I deleted the program, using "remove program" from Settings/System, and it started working. Go figure.
yeah,it works good on MDA Vario(czech TMO firmware)
pls have u got same cab for wi-fi ?
Styxer said:
yeah,it works good on MDA Vario(czech TMO firmware)
pls have u got same cab for wi-fi ?
Click to expand...
Click to collapse
Also still searching for the wi-fi one!
It Does not work on my QTEK 9100. It actually warned me that it's not compatible while trying to install..
Dont think anyone has noticed with the TyTN but HTC have re-enabled the feature to quickly access the call list and speed dial list. In the phone app click either Up or Right to access the call list; Down or Left for speed dials.
haha - good one ;-) ... first thing I noticed when I switched on the device; maybe because I came straight from the hw6515 where that's exactly how it works.
Martin
With smartskey (search for it)
in phone application by default
UP :Speed Dial
DOWN: Call History
LEFT : Messaging
RIGHT : Contacts
And if I remember right; also you can change the behaviour of the buttons
Hope this is what u r asking for :lol:
The reason i posted it was because when WM5 was first released this was one feature that was missing that was present on WM2003SE previously.
Dont use smartskey as i came from a BA not a wizard.
efjay said:
Dont think anyone has noticed with the TyTN but HTC have re-enabled the feature to quickly access the call list and speed dial list. In the phone app click either Up or Right to access the call list; Down or Left for speed dials.
Click to expand...
Click to collapse
OOOPS
I did not notice the re-enabling thing :?
works with the wheel also.
This means one hand dialing really is possible.
Great find
cpchanel said:
works with the wheel also.
This means one hand dialing really is possible.
Great find
Click to expand...
Click to collapse
what actually is accessed by wheel? recent calls or speed dial?
Does this function have an on/off setting somewhere. I know I had it before but now for some reason the d-pad won't access call list...? Not sure what happened.
I did realise since I also came directly from a blue angel. I didn't know that it works with the wheel too.
That's great!
The only thing which I find a pity is when I'm in Call Status mode just after finishing a call, then it does not work. Anybody know a way to make it work in call status mode, too?
I did not install the Extended Rom on my o² Trion and this function is not working. I really miss it though.
Does anybody now, what CAB do I have to install? Or did anybody try Smartskey on a TyTN?
Cheers
H.
howi303 said:
Or did anybody try Smartskey on a TyTN?
Click to expand...
Click to collapse
i did, works, however i'm only using SmartSKey on my Hermes for quick real-closing apps with right softkey. i don't know how accessing call history and other phone-stuff works.
Is there any application that makes putting bluetooth toggle as today plugin possible in WM5 ????
Please Help !!!
Maybe Like This One -->
Thanks in advance
download and install batterystatus. Very easy to find as it is all over this forum. Go to the options and select the Tray Launch Tab. You will be able to add bluetooth,wi-fi,phone, as well as many other options to the tray at the bottom of your screen.
this should work
found this somewhere, i have it installed and it works good.doesnt take up much space either.
As an alternative, Vijay codes up a bunch of really handle utilities, and one (VJvolubilis http://www.vijay555.com/?Releases:VJVolubilis) can toggle BT. Then all you need is a today screen shortcut to his prog with the right suffix. cLaunch should do it if you want it on the today screen instead of the tray, or even create a drop-down menu controlled by a hard key with something like WM5NewMenu. All these are free, but I'm sure the developers would love a donation!
Theres a registry hack on ppcgeeks that enables that and wifi on your today screen if I find it i'll post it
BT on today-you find it???
Nitefall said:
Theres a registry hack on ppcgeeks that enables that and wifi on your today screen if I find it i'll post it
Click to expand...
Click to collapse
I have been searching for this for a while now. I have started using phone weaver and turned everything else off but BT. See cab and thumbnail. In thumbnail look in bottom right corner of today screen for activated BT! I would like this to happen without running Phone weaver, seems to take up a little more memory than I would like for this type of app, but it works great and I am happy with it. Just what I wanted, if I could actually get rid of the few little icons to the left of the BT I would be VERY happy thats my main gripe here...
Cheers!
Efcomm.cab is what you need
here you go:
Not Quite
davehutch said:
here you go:
Click to expand...
Click to collapse
Not quite what I am looking for, I just want a Bluetooth ICON that is a today plugin no WIFI, NO Phone, just an icon so I can turn it on and off using my finger.....
thanks though!!!
phillyg8r said:
Not quite what I am looking for, I just want a Bluetooth ICON that is a today plugin no WIFI, NO Phone, just an icon so I can turn it on and off using my finger.....
thanks though!!!
Click to expand...
Click to collapse
ciclebt.cab.... and assigne to hardware button. or use as app via applauncher programs.
You can use btIO-mini (see attached file). In this zip there are 2 files.
I made this for 2 reasons. The first is to have a quick toggle via HTC Home integration, and the second ist to be able to turn on/off BT via voice command.
1. bluetooth.lnk -> put this in your \windows\startmenu\program files\ folder
2. btIO-mini.exe put this in \program files\btIO\
3. Make a shortcut from your favorite launcher today-plugin to btIO-mini.exe
Make a softreset, after that you can use voice command to turn on/off bluetooth.
There is no visible indication, like pop-up or message box that tells you which state BT is. The program just looks in which state BT is and if it's off it turns BT on in connectable (invisible) mode, and if it's on it simly turns BT off and exits.
So this is not exactly what you asked since it is not a today plugin but maybe it will help you.
Cheers
EDIT: Be warned! The program icon is ****ing ugly. Will have to find a better one...
Thank you guys for your response ....
But I'm asking about the plugin in the attached picture ...
thank u again ..
azzambm said:
Thank you guys for your response ....
But I'm asking about the plugin in the attached picture ...
thank u again ..
Click to expand...
Click to collapse
That is "wireless" plugin for today. only shopwing operator anem, wifi and bluetooth status..
BUT you cannot toggle with it.
regards
Hi there,
i didn't have this issue before but i have new sim card since a week and on vodaphone FR ( sfr) ...the thing is that when somebody calls me , at the first ring , the phone autoanswer to the call and i have no choice to speak !!!! if the phone is in my pocket, the time i take it , the phone has answered since a long time ...i don't know why it is like that .....
i have checked in the phone settings if i had had set the auto answer but no.
in HD tweak or Schaps3 , i did nothing like this .....
please help, it is more than annoying ......
another question: how to disabled the answering machine logo and notification displayed on screen when you have a new voice message ( i also have everytime "voicemail" displaying on the screen asking me to set the number)
thanks for help
i found the answer by enbaled the sleep function in hd tweak .....
so all is fine now ....but i still have the voicemail thing when a new voice message is waiting ...... if somebody knows .....
My phone always answers when I try to retrieve it from my pocket.
Very frustrating, any tips?
Maybe remap the keys? i didnt have a problem with this so far!
or use s2u2 to lock all buttons and use slide to answer feature.
this will sort out your problem besides its always a good thing to place your phone so the buttons face the bottom so when you pick it up you wont accidently press them.. make sence right?
cheers
Which version of s2u2 do you use I notice there are two on their web page - VGA or QVGA?
vga. it has inbuilt wvga support.
probably you have installed gyrator, which by default when you move your phone, it uses the g sensor to detect movement and answers your phone, go to the events of gyrator and disable the event
I had this too - thanks for pointing out that it was a behaviour of Gyrator.
How annoying! Turned it off now.
Is it possible to make a small tool that shows a small indication at the taskbar if the Bluetooth is on or of?
I use the windows dialler pad because the ring delay is lower than the HTC dialler.
But than you will have no Bluetooth indication.
It would perfect if the indication is very small. I don’t need a icon because this will waste the small place of the task bar.
Just a blue dot like the white dot that appears when Gsen is active.
Have a nice day
Thomas
Sorry for my English. I tried my best
I'm very much in favour of it. Have the same problem!
Me too please.... I have requested this before, but no luck yet.... I now use a programme called "bluepower" which turns on the bluetooth whenever my diamond is being charged. So when I am in my car and my phone is in the cradle, I know bluetooth is on. I don't need an indicator in the taskbar as I KNOW it is active. Therefore I can stick to the windows dialer for the same reasons as you.
I found this after a very quick google. Tested and working fine on my Diamond.
http://www.careace.net/2009/04/17/bluetooth-icon-patch-for-samsung-windows-mobile-ppcs/
I've also added the information to my WM dialer skin thread. )
Juhu, it`s works!!!