Dont think anyone has noticed with the TyTN but HTC have re-enabled the feature to quickly access the call list and speed dial list. In the phone app click either Up or Right to access the call list; Down or Left for speed dials.
haha - good one ;-) ... first thing I noticed when I switched on the device; maybe because I came straight from the hw6515 where that's exactly how it works.
Martin
With smartskey (search for it)
in phone application by default
UP :Speed Dial
DOWN: Call History
LEFT : Messaging
RIGHT : Contacts
And if I remember right; also you can change the behaviour of the buttons
Hope this is what u r asking for :lol:
The reason i posted it was because when WM5 was first released this was one feature that was missing that was present on WM2003SE previously.
Dont use smartskey as i came from a BA not a wizard.
efjay said:
Dont think anyone has noticed with the TyTN but HTC have re-enabled the feature to quickly access the call list and speed dial list. In the phone app click either Up or Right to access the call list; Down or Left for speed dials.
Click to expand...
Click to collapse
OOOPS
I did not notice the re-enabling thing :?
works with the wheel also.
This means one hand dialing really is possible.
Great find
cpchanel said:
works with the wheel also.
This means one hand dialing really is possible.
Great find
Click to expand...
Click to collapse
what actually is accessed by wheel? recent calls or speed dial?
Does this function have an on/off setting somewhere. I know I had it before but now for some reason the d-pad won't access call list...? Not sure what happened.
I did realise since I also came directly from a blue angel. I didn't know that it works with the wheel too.
That's great!
The only thing which I find a pity is when I'm in Call Status mode just after finishing a call, then it does not work. Anybody know a way to make it work in call status mode, too?
I did not install the Extended Rom on my o² Trion and this function is not working. I really miss it though.
Does anybody now, what CAB do I have to install? Or did anybody try Smartskey on a TyTN?
Cheers
H.
howi303 said:
Or did anybody try Smartskey on a TyTN?
Click to expand...
Click to collapse
i did, works, however i'm only using SmartSKey on my Hermes for quick real-closing apps with right softkey. i don't know how accessing call history and other phone-stuff works.
Related
...long time lurker; first time poster...
did a search on this once and if it's here, sorry i missed it:
what is the reg-locale for ensuring the Bluetooth System-Tray Icon is enabled to launch when bt is active. since performing the following reg-edits, it no longer appears.
Increasing font cache and screen performance:
"HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE"
Change "limit" from "8192" (default) to "16384"
Increase general performance:
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\"
Change "CacheSize" value from "0" to "4096".
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=0x1000(4096)"
Change "EnableCache" value to "1"
"HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\"
Change "ReplStoreCacheSize" value to "4096"
Enable Cleartype in landscape mode:
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
Change "OffOnRotation" to “0”
also... i did this one and then reversed it since i learned (after the fact) that cingular 8125 is already b/g:
Enable 802.11g:
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS
Assign a value of 1 to dot11SupportedRateMask
Assign a value of 8 to dot11SupportedRateMaskG
thanks to anyone making time to reply!
can someone confirm that their actually is a bt icon that resides in the system tray (top bar) when bt is enabled???
maybe it was a fluke that i actually saw it there for a brief period today?
maybe i'm seeing things?
I have not seen that icon in WM5. But I would like to have it there.
Oh its there alright. In fact, in the online help somewhere on my 8125 it actually lists the icons and their descriptions. One of them is the BT icon.
Its beyond my why there isn't an application that can indicate with a headset icon to notify you if your phone is paired to a BT earpiece. Someone had posted once PhoneAlarm did it, but alas. It does no such thing.
If anyone else knows of a program that will tell you if you're currently connected to a BT device, please speak now!
Ok, found out where the icon is listed. Go to the main WM5 online help on the device and go to Personalizing your device>Over of the Today screen>What do these status icons indicate?
Towards the bottom you'll see the icon... IT EXISTS IT EXISTS!... sigh
it does because today... it appeared for a moment. it played peek-a-boo while device was bugging-out. glad to know i wasn't seeing things. i wonder if having the clock reside in the sys-tray has anything to do with it???
i have found this application http://www.pocketpcfreewares.com/en/index.php?soft=1319 to at least show when the BT is on. It also tries to connect to a headset when there is an incoming/outgoing call. Not having a headset myself, I have not been able to test this function, but bt does turn on on a ring and turn off when I end the call.
i got this cab from somewhere here in the forum which shows the bt icon on the system tray, to allow you switch on/off bluetooth, i beleive it was designed for the universal but it works fine with my kjam (wizard).
majdi said:
i got this cab from somewhere here in the forum which shows the bt icon on the system tray, to allow you switch on/off bluetooth, i beleive it was designed for the universal but it works fine with my kjam (wizard).
Click to expand...
Click to collapse
Thanks! This .cab works great.
Now I only need the same type of icon for wifi. Anyone got such .cab file???
Works Great on KJAM JASJAR and EVEN A T O M !
Thanks.
I tried it on my k-jam but unfortunatelly... nada
I downloaded the cab file to my pc through the link, then copied the file to my devise and run the installation therein...
Am i missing something?
Weird
I installed this, and nothing happened, so I deleted the program, using "remove program" from Settings/System, and it started working. Go figure.
yeah,it works good on MDA Vario(czech TMO firmware)
pls have u got same cab for wi-fi ?
Styxer said:
yeah,it works good on MDA Vario(czech TMO firmware)
pls have u got same cab for wi-fi ?
Click to expand...
Click to collapse
Also still searching for the wi-fi one!
It Does not work on my QTEK 9100. It actually warned me that it's not compatible while trying to install..
Hello,
I have installed the speed dial "testtodayplugin.cab" like the speed dial on the treo 700. It shows picture thumbnails which are speed dials.
Within the setting when you go to the today plugin, then hit options it says
"PRESS OPTION + SCROLL TO MOVE A BUTTON"
I have a imate kjam / Wizard... I dont know where my option button is or the scroll to re-arrange pictures...
Can anyone guide me to where the option and scrolls buttons are on the unit...
Thanks in Advance,
Scott
Edit/Delete Message
There's an issue with the full functionality of the program since it's actual residence IS the 700w. I think, from experience and from these forums, that this is just one of the issues. May I suggest just deleting the buttons and creating them as you want them to appear on the screen?
I know I can do that, but it tends to get a bit annoying.
Do you know forsure that this is a flaw?
Thanks,
Scott
blackstangv6 said:
Hello,
I have installed the speed dial "testtodayplugin.cab" like the speed dial on the treo 700. It shows picture thumbnails which are speed dials.
Click to expand...
Click to collapse
Hey, where is this CAB file please?
Cheers
Don't know if you still need the testtodayplugin.cab file but...
http://forum.xda-developers.com/download.php?id=10714
well im using this plugin just now, and i was curious to see if there is anyway to enlarge the speed dial pictures....
Okay, I've been reluctant to post this, but I've search the forums and I've search Google, etc, etc. and can't find the answer... What I want to do is add two icons on my Today screen that go to my Call History and my Speed Dial. I'm using iLaunch and can pretty much create an icon to anything, but for the life of me I can't figure out the link/path to Call History or Speed Dial. I'm pretty sure it possible bacuse it's right there as a button on my dialpad. Can anyone tell me the link or how to create a link to those two applets?
Thanks!
Oh, I have a 8525 running Black 2.0
egypt123 said:
Okay, I've been reluctant to post this, but I've search the forums and I've search Google, etc, etc. and can't find the answer... What I want to do is add two icons on my Today screen that go to my Call History and my Speed Dial. I'm using iLaunch and can pretty much create an icon to anything, but for the life of me I can't figure out the link/path to Call History or Speed Dial. I'm pretty sure it possible bacuse it's right there as a button on my dialpad. Can anyone tell me the link or how to create a link to those two applets?
Thanks!
Oh, I have a 8525 running Black 2.0
Click to expand...
Click to collapse
Download the attached file, unZIP it, copy CallHistory.exe to your phone, and you will have CallHistory. I dont know the solution for Speed Dial. sorry.
Thanks! Worked like a charm. Now if I could only find the Speed Dial app....
egypt123 said:
Thanks! Worked like a charm. Now if I could only find the Speed Dial app....
Click to expand...
Click to collapse
can you guys please post a Screen Image?
I just want to see if it's what I'm looking for
I currently don't have a screen-print app on my device to get you the actual image of my Today screen, but this image is similar to the look of mine with the larger icons pointing to various applications/shortcuts. The Call History and Speed Dial screens are the same as you get to by going to the Dailpad and clicking on the History and Speed Dial buttons.
I find myself using the Call History and Speed Dial more than my Contacts or manual dialing so I wanted access to those two options with one click rather than going through the dial pad or fumbling around with the bottom jog pad.
Try
http://www.vijay555.com/?Releases:VJPhoneShortcuts; try it
or I made myself a small cab that I can send u with one the apps above (speedialer) to install to left soft key straight.
dan1967 said:
Try
http://www.vijay555.com/?Releases:VJPhoneShortcuts; try it
or I made myself a small cab that I can send u with one the apps above (speedialer) to install to left soft key straight.
Click to expand...
Click to collapse
hello dan1967 could i have a copy of this cab please ??
Thankx
John..
Why should you have a piece of software running for his.
Press the "green" button and directional pad "right" and you will have the calle history
Press the "green" button and directional pad "left" and you will have the speed dial list
speed dial
thanks for that Davuzal and it very useful ,but i can not get to both buttons when its in car holder what i needed to do was a press of the top side button or voice comand iv done both with help from here
http://www.vijay555.com/
thankx to all
John..
towinguk said:
hello dan1967 could i have a copy of this cab please ??
Thankx
John..
Click to expand...
Click to collapse
here it is; let me know if it works for you.
hello
yas that works fine thanks
John
Hey guys.
I cannot get this application to run on my dual! It just loads a black screen. It works though because I can slide to unlock it without being able to see the screen which isn't all that useful!
So is this just me?
Sam
Same problem on my Kaiser
Hi there!
I am having the exact same problem on my Kaiser phone.. :-(
Who can help?
Henk.
It's known bug with certain devices but here's a workaround disable Direct Draw:
Edit your registry, navigate to \HKEY_CURRENT_USER\Software\A_C\S2U2
Find the key DirectDraw and change the value from 1 to 0.
Funny enough on my dual I didn't have to do this tweak!
'slide' to unlock?
I assumed 'slide' to unlock was sliding the phone open..
after a couple of resets I found out that you had to 'slide' on the screen
I there really no way this to may it work with sliding the phone open,
thought this would be really nice..
Besides from this misunderstanding of mine it works fine, caller Id is very nice!
gfreek said:
It's known bug with certain devices but here's a workaround disable Direct Draw:
Edit your registry, navigate to \HKEY_CURRENT_USER\Software\A_C\S2U2
Find the key DirectDraw and change the value from 1 to 0.
Funny enough on my dual I didn't have to do this tweak!
Click to expand...
Click to collapse
Wow.
You are actually amazing for making that work!
You know, that may be one of the best answers I have ever recieved. Thank you so much
My Wing was doing this also. I changed the name from wallpaper.gif to Wallpaper.gif and it works fine now.
Worked!
Worked fine for me; thx!
works after the registry key change, but....
It works lousy if you activate the callerID. When you get a call , the internal phone app. takes over the S2U2, and after you finish the call the screen just remained in the position of the incoming call picture of the S2U2 and you cannot do anything except soft-reset. :-(
Does anyone has an idea or suggestion?
TIA/Zohar
sorry for my stupid q:
may i know why you choose s2u2 instead of the WM6 built-in key-lock feature? just due to big wallpaper instead of the Today screen, or some other great features attracted you?
Hey good question.
I prefer it because its a sleeker interface to go with a sleek device and also mainly because it annoys iPhone users that I know.
mini_man said:
Hey good question.
I prefer it because its a sleeker interface to go with a sleek device and also mainly because it annoys iPhone users that I know.
Click to expand...
Click to collapse
haha.. lol
i personally like the big caller photo most. yet i still can't make up my mind on using it for long term, because now sliding out the keypad can only wake up the device but no longer unlock it. and personally i still prefer using the green/red keys to answer/reject calls, which means the built-in key-lock feature can also do.
..and one more
It seems that all the keys and everything is locked except the iCube.
This can be activated even thouth the S2 is in keylock state.
zoharbl said:
It seems that all the keys and everything is locked except the iCube.
This can be activated even thouth the S2 is in keylock state.
Click to expand...
Click to collapse
(for Sprint Touch (Vogue) and Touch Dual (Nike))
you can lock the cube as well by adding this reg key:
[HKLM\Software\HTC\Biotouch\Disable4SpecificApp\S2U 2]
"ClassName" = "S2U2"
is the ' ' space at the end of the key name correct? 'S2U 2' or should it be 'S2U2'?
gmlogan said:
is the ' ' space at the end of the key name correct? 'S2U 2' or should it be 'S2U2'?
Click to expand...
Click to collapse
no space. just S2U2.
how to disable the auto dailing when touching the contact in the dail pad? Is it possible to display the contact details like I-phone does? When using the prevous Diamond's netvigation pad, it is possible to open the contact details. But how can it works for HD with no direction pad? Please help, very inconvenient when choosing the contact with multiple phone number. HELP!!!
THAT is something that also really annoys me.
i would love an option to turn that off!
I am using Pocket CM and it doesn't has that problem.
1 click on the contact to show detail and another click to choose which number you want to dial.
does it replace the standard phonepad app?
what we mean is when you press the dial button - then the dialpad and the call history appears.
clicking on a contact in the list leads to dialing the number.
in the normal wm contact app the klick leads to the contact like we know and want it.
matyu88 said:
how to disable the auto dailing when touching the contact in the dail pad? Is it possible to display the contact details like I-phone does? When using the prevous Diamond's netvigation pad, it is possible to open the contact details. But how can it works for HD with no direction pad? Please help, very inconvenient when choosing the contact with multiple phone number. HELP!!!
Click to expand...
Click to collapse
I completly agree, I have been seaching for a solution..
didnt find a registry key that could solve that
this would be a nice feature to find
actually you have to slide the contact name to choose the phone number you dial, or the action you launch.
i agree this is the most annoying thinh in hd
I think you are talking about the Phone interface (Refer to User Manual P.50 Using Phone Features), when you short-list the contact you would like to select, on Point 4 of the Manual, it instructs you to
To call a different phone number
associated with the contact, select
the contact, then tap Menu >
Open Contact.
Instead, you can just simple "tap" on the right hand of the contact, it will pop up the contact detail, then you can select (tab on the associated number) to dail
Hope this can help.
matyu88 said:
how to disable the auto dailing when touching the contact in the dail pad? Is it possible to display the contact details like I-phone does? When using the prevous Diamond's netvigation pad, it is possible to open the contact details. But how can it works for HD with no direction pad? Please help, very inconvenient when choosing the contact with multiple phone number. HELP!!!
Click to expand...
Click to collapse
To call a different phone number
associated with the contact, select
the contact, then tap Menu >
Open Contact.
Click to expand...
Click to collapse
...select... How it to make, without calling number? Explain...
One way that I have tried is to change the phone dial skin to standard windows mobile. If you install the htc tweak written about in this forum you can easily change phone skins. The standard phone skin does not dial the phone when you tap the contact but gives you a list of phones for that contact. It does mean however that you will have another look for your phone dial.
yongkang said:
I am using Pocket CM and it doesn't has that problem.
1 click on the contact to show detail and another click to choose which number you want to dial.
Click to expand...
Click to collapse
Are you using a skin other than the default one for PCM? if so, wanna give a link?
gien29 said:
actually you have to slide the contact name to choose the phone number you dial, or the action you launch.
i agree this is the most annoying thinh in hd
Click to expand...
Click to collapse
I'm fine w/ just sliding, thanks a lot! Dunno why I didn't think of it lol...
This is also something that bugs me but not only that.
I drive to work by bycicle. When I do, I have my HD in my pocket, playing radio.
The HTC headset has 2 buttons embedded of which 1 auto dials the last number when pressed. Unfortunatly when your wearing a headset, have a laptop bag around your shoulder and during these Winter times are wearing sturdy coat, the button gets pushed accidentaly all the time.
Disabling that function would be brilliant too.
jim256 said:
Are you using a skin other than the default one for PCM? if so, wanna give a link?
All I know is that I found it as an option in the HD Tweak under the heading 1.8 Phone Pad Style. There are two options HD (Default) and Windows Mobile Standard.
Click to expand...
Click to collapse
apap said:
jim256 said:
Are you using a skin other than the default one for PCM? if so, wanna give a link?
All I know is that I found it as an option in the HD Tweak under the heading 1.8 Phone Pad Style. There are two options HD (Default) and Windows Mobile Standard.
Click to expand...
Click to collapse
Right thanks. I was merely referring to your use of PocketCM. Obviously some things are tiny using the standard included theme.
So my question was, aside from any dialing issues, I just wanted to ask real quick where you got a WVGA theme if you did (anyone know of one?)
Thanks.
Click to expand...
Click to collapse
i finally switched to the classic windows mobile phonepad. since i dont videocall anybody that is ok for me.
unfortunately the list doesnt support sliding with the finger for browsing the entries. and the entries are a bit small
andykha said:
...select... How it to make, without calling number? Explain...
Click to expand...
Click to collapse
if you just slide your finger across a certain contact, it will not call directly that contact, but change the phone number selected, if more numbers available, or switch to send text message etc.
I also discovederd that by accident, but its working and enough to solve this most annoying problem.
it seems there is no solution to solve it. Anybody have further suggestion. Please help for the frequent user of the smart dailing. Or if we could change the registry of the phone. Help!
promexx said:
i finally switched to the classic windows mobile phonepad. since i dont videocall anybody that is ok for me.
unfortunately the list doesnt support sliding with the finger for browsing the entries. and the entries are a bit small
Click to expand...
Click to collapse
...and the bluetooth status icon disappeared from the title bar, if you haven't noticed yet :-(
yes, and also the incomming call is not as it was before. didnt notice that until i got a call.
i now switched back to htc dialpad and have to live with that press and call thing