I have a big problem, i when i started my SPV M650 (Orange phone) 2 days ago it didn't want to start (blocked on orange splash screen)so i reset my spv but still the same.
ipl 1.84.0001
SPL 1.84.0000
GSM 02.67.90
OS 1.28.0.0
PLZ HELP
THX
go to bootloader mode, download and flash official ROM for your device.
It is not dead, dont worry!
but before that please write your upgrade procedure, did you CID unlock device, which ROM U used....
Hello to all. My name is Kushal.
I own a Cingular 8125.
ROM Version :: 1.8.11.1 WWE
ROM Date :: 11/24/2005
Radio Version :: 01.16.11
Protocol Version :: 4.0.13.21
IPL 1.xx
SPL 1.xx
I want to upgrade my ROM ... I even tried to flash it but it was giving me an error with error number 266, something like that ... I even tried lokiwiz.bat and EnableRapi.cab and then again tried to flash the ROM but again failed ...
Anyone please tell me step by step what should be done in order to successfully flash the ROM and upgrade it to WM6.
I was using Kaiser ROM for upgradation ...
M waiting for your reply !!!
Thankyou.
Can anyone suggest me to use which ROM for upgrading ...
also when i am trying to upgrade the ROM with KAISER ROM
on my PDA it is showing
-----------------------
IPL 3.08 RUU
SPL 3.08
USB
------------------------
and on my PC -->> an error [266] occured...
thats it ...
ok,First,is your phone in working condition,does it load up OS or its stuck on Bootloaders (Multi Color Screen) ? Did you perform CID unlock before upgrading to wm6 ? coz without CID unlock,it won't upgrade at all.
If its working,then download WST_4.2.2 tool and verify the CID Lock/unlock status of the phone,if its still CID unlock,then get it unlocked either through 'lokiwiz 02b' or WST_4.2.2,only then flash any wm6 rom.
Secondly,if its not working and gets into Bootloaders,then download the official cingular rom and flash it in Bootloaders to recover back to its default working status and then proceed further as described above.
Read and follow this guide carefully to fully understand the CID unlocking and upgrading method :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Buddy, my PDA is very well in working condition, and it loads the OS and doesnt stop at bootloaders ... i am able to make calls and do what ever ...
Next, my CID is unlocked ...
And now i cant figure out how to flash a ROM ...
may be i am confused or i am not able to understand the steps involved in doing so ... And can you please suggest me a gud ROM image to upgrade ...
Thank you.
any One help me i write spl on Gene after run spl now my Gene show only boot mode
ONBL 1.07.0000
SPL 1.10.0lip
Plss Help mee.....urgent
Dopod d600 bricked during the upgrade.
Need help for a bricked Dopod d600 Gene 100
Only light blink at the bottom, not movement ahead.
Bootloader through cam button and power button.
ONBL 1.07.0000
SPL 1.07.0000
on Bootloader.
Tried everything, nothing works.
cant use the Orefkov Unlocker as the usb drivers for vista doesnt work nor recognises the device.
Help !!!
Bro Download Hard Spl V 1 It works for u
i juss bricked my Mobile and now i have downloaded Hard SPL used it
and IT WORKED hit me PM i will help you two people
Sorry for double Post Connection Problem :|
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Flash your Official ROM
rockerboom said:
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Click to expand...
Click to collapse
First try to flash your official ROM and then try to flash ipl/spl again follow step by step. After that try to flash customize ROM again. Hope you will success.
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
rockerboom said:
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
Click to expand...
Click to collapse
After flash back to official ROM , enter bootloader and check ipl/spl first.
Normally, if you flash ipl/spl (not hard spl) when you flash back to the official ROM the ipl/spl will back to original. S/R - wait for boot to WM if OK then do H/R again. And flash ipl/spl again - enter bootloader and check ipl/spl again (changed or not) if OK after that I recommended you flash Onyx ROM. I used it for long time and no trouble.
Hope, it's can help you.
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
rockerboom said:
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
Click to expand...
Click to collapse
How you flashed ROM ? By RUU (PC) or used microSD card. I recommened you to use RUU (PC) follow step by step. Sometime when I used microSD card to flashed ROM , it's successful but cannot boot, after that I flashed Official ROM by RUU and unlocked the phone again it's back to normal. And your official ROM, you must check with your operator or distributor because in different zone it's use diferent ROM.
Dear ELF341,
I only can flash via PC RUU, I don't succeed in SD card way:
- When I copy the *.nbh file into SD card, then enter bootloader, I just can see the checking SD card content string displayed very fast, then the tri color screen.
- When I create a goldcard and copy *nbh file into it, enter bootloader, the brick ask for 'upgrading SD image', I press power button for it to start download but it hang at 'downloading from SD' with a blank download status bar.
Actually I bought this ELF from a man on my local site, so I don't know where is the distributor...I used the mtty and usb monitor to check for my device infor, then search internet for my original ROM, I only can find in a China forum that match my deviceID/CID....
For my case, I really don't know why I can not change its IPL/SPL version? Please help me!!!
Thanks for your time!
well u hav to rename the nbh file to ELF0IMG for SD card flashing to work.
Hello;
I have a vodafone HTC elf phone
I flashed it with this ROM onyx_6_release14_2
it worked for a while than it broke down
when I try to open it it shows up starting screen Vodafone and directly shut down and does not boot up
i changed its IPL to to 1.17.002 and its SP to 2.28.0000
but now it does not even show up the starting screen Vodfone
any Help please???
Htcself010050—
please help me.i have this htc end i want to find original ruu becase is blocated in bootloader. ipl 1.17.002end spl 1.17.0000.