Does anyone know of a tool which can extract the PRL from a phone? I use a non-us provider and when upgrading my ROM it always shows that I am roaming, when I am not, this causes problems with email retreival as it always asks for permission to connect.
Thanks.
Related
I installed the XDA developers ROM, and everything is ok except the internet connection through GPRS. I wrote he APN that my provider gave me, (Orange-Isral) is "internet.orange.net.il". No other settings. I can connect to the internet and send and receive emails, but I can't browse in internet explorer neither in the ftxpbrowser. Before the upgrade it worked fine. Also before the upgrade, every time I click on an internet link the QTEK eould connect to the ne. Now it doesn't. Any idea what am I doing wrong? Someone had experience similar probems? Thanks.
Connection settings didn't worked for me too after I flashed the original developers ROM. Even worse after the second and the third re-flashing - autoconfig just wouldn't work at all.
I "fixed" the problem simply removing "operators" section from the mkrom shell script and configured everithing manually then. Of course you'll need to build the ROM yourself. But it's also a great fun.
One problem with the current version of mkrom, is that it may put the operator rom after 81bc0000 if you have too many files in 'files1' ( and then autoconfig.exe cannot find it anymore ).
the lost connection settings probably have something to do with 'defaultconfig.xml' ( which I currently ignore ). I have to fix our own welcome.exe to process that too.
expect an update with many problems fixed soon.
If I reflash the original qyek version or the 4.17 UK O2, would zi be able to connect again?
I flashed the devolopers rom but cant browse the internet...My email and msn are fine just no web access i am on vodafone and i configure my own settings.
Have just used adaptrom to flash back to 3-17-03 awaiting any updates on devolepers rom, It was very good to say the least just i need mobile ie.
I will have a play at the weekend.
Same here. I flashed the ROM on a US T-Mobile unit, and can't surf with ie. Thunderhawk works, but ie is crippled. That defaultconfig.xml file needs to be executed. Is ther any way to execute it manually :?
Thanks.
Have you execute autoconfig.xml file??
I have the same problem, I have put my autoconfig.xml file on the ROM but don't update nothing....
have any one try it....to set connection, favorites on Internet Explorer etc...
I have found defaultconfig.xml file on my Qtek 2020 on \Windows
directory but If I change file for example to add favorites to Favorites Explorer this don't appends ..
anyone have the solution for this problem???
please...
I had a problem and I suspected it was due to the updated PRL. The latest ROM update contained 60610 and the one on my phone was 60611. I noticed that the rom updates come with a cab that looks like it updates the PRL. I put the rom on a microsd card and ran it from the phone. It installed the PPST program to my phone. I then went to the windows directory and there was a ppst executable there,along with the PRL file,named 60611.prl . (You will also see this name in the xml file in the cab) I ran PPST,and it installed the PRL and prompted me to reboot. After reboot it reprovisioned the data services and the phone now shows 60611.
Be carefull doing this however,I dont know how to get back to 60611. Presumably sprint can make this happen,but I think they think I have the latest PRL. It prompted me to upgrade the last time I called sprint,so I doubt it will do it again.
alternative method...
just dial ##prl# (##775#) and enter your 6 digit msl # which you can get from sprint easily if you don't have it (tell them you did a factory reset and have to reprogram). Then click on prl, edit and you can put in whatever prl you want. I download mine from corolada.com/prl and it works fine.
Alltel Update
Or if you have an Alltel 6800 or 6700 you would dial ##775 then enter all 0s a total of 6 of them then tap on the PRL and select menu and then edit then browse your phone for the prl file, of course you would have to obtain the prl file first which you can search around as mentioned before to get them or if you get lucky you might be able to get an Alltel Tech Rep to send you the file but they aren't supposed to so again you would have to be kind of lucky to get it from them.
cintiajeremiah said:
Or if you have an Alltel 6800 or 6700 you would dial ##775 then enter all 0s a total of 6 of them then tap on the PRL and select menu and then edit then browse your phone for the prl file, of course you would have to obtain the prl file first which you can search around as mentioned before to get them or if you get lucky you might be able to get an Alltel Tech Rep to send you the file but they aren't supposed to so again you would have to be kind of lucky to get it from them.
Click to expand...
Click to collapse
this has all the PRL files you could ever want.
http://www.corolada.com/prl/
I currently own a Mogul and unfortunately dropped it and broke it. I purchased an Alltel PPC 6800 from a friend and the ESN is bad on Alltel because he didnt want to pay the bill. I successfully cloned the ESN of the PPC 6800 to the same ESN as my Mogul and I have read a ton of information and as far as i know it is not illegal because i still have the phone in which the ESN is registered too, but thats not the issue here. I can make and receive texts/calls just fine, but data does not work. When I try to IOTA program the phone it fails with an error 1012. If anyone has any suggestions I would appreciate the help.
Thanks
I have the same issue... I think it has todo with the username and password it logs into the vision network with.
download DCDs rom 3.2.5 and then download nueSPL 2.47 i think and then download DCD's Carrier cab.
now run the NueSPL2.47 that u put on the memorycard.
now run the DCD rom updater using active sync.
then put the carrier cab on your card and run that.. now you can use data...
I didnt try what dc13 had mentioned but I did get it to work. Here is how I did it:
1. Ran HardSPL 2.XX
2. Installed the official Sprint ROM, and let it go through its complete customization.
3. Then installed DCD 3.2.5 and ran the carrier cab.
Everything seems to work perfectly. Let me know if you have any problems.
My Xv6800 data does not work. I've done everything that i found from the forums. Anyone have any advice? I did 2.40 olipro, then did stock rom, then DCD 3.2.6 and radio 3.42.50.
Did you load your carrier cab? I am assuming since you have an XV6800 that you Verizon, if so get the Verizon cab and install it.
Cabs are available here.
http://dcd1182.n715dp.com/index.php?dir=carriers/
BTC
You will have to add the cell modem back in your self. When you flash with the custom rom there is no cellular modem added by default . It's documented some where (I had the same issue the first time I flashed). You have to go to connections click add then select cellular modem. Make sure you have the correct network settings (UN/PW) and your all good to go.
D
IS there any way to made a carrier cab? I do not see the one I need on the list. I have the original phone and I can pull it off from that phone.
depperly said:
You will have to add the cell modem back in your self. When you flash with the custom rom there is no cellular modem added by default . It's documented some where (I had the same issue the first time I flashed). You have to go to connections click add then select cellular modem. Make sure you have the correct network settings (UN/PW) and your all good to go.
D
Click to expand...
Click to collapse
I think you need to refer to the post by BillThyCat because your wrong about that. A cab file is all it takes.
The only reason you would need to load a cell modem driver is if you were going to have it connect to a different ISP that your default carrier data network, as far as I know, as I have never had to load any sort of driver to get my phone back on the data network after flashing.
If your carrier isn't listed, and you have the original phone still handy, I believe there is info you can copy from your EPST screens and put into your new phone that will reenable data. Tho this is something I have not had to do since I have a carrier cab available.
What carrier do you have? Maybe someone else here with the same carrier can help out.
You may need to recreate the dialup connection under network connections as well, with most carriers the dialup # is #777 and then you use a login and password that is unique to your account. It's possible your carrier help desk may be able to walk you thru how to reconfigure this. Depends on the carrier.
This doesn't require software, just some configuration on the phone.
BTC
I went through the flashing okay. And I was even able to unlock and do everything else including getting a code from MS. But when I get to the step that says run connection set up, it tells me that my carrier is not in the database and then tells me to manually set up my APN.
I know I did everything else okay, but I know I can't edit my HD2 registry settings because of this. And my market and xbox features don't work because of this issue.Please, if anyone has had this experience, or knows why I'm getting a "carrier not in database" when I run HTC Connection set-up. I would greatly appreciate it. I hope I'm not the only one having this issue.
Same problem here. Whats your carrier?
I already tried to add the keys manually using a registry editor. However it didn't work and the phone has locked itself again. Now I cannot even unlock it anymore using chevron (it says no connection) so I cannot launch any registry editor or try something else. Probably I have to flush it again. However what I still really need is a solution to this problem with the carrier.
I have solved the problem. My carrier is a small carrier from austria (bob). It seems that the HTC tool simply doesn't have any data for this carrier (the tool in win mobile 6.5 has known bob...). I used another sim from another austrian carrier (a1), whith this i was able to run the tool and add the registry data!
The Connection Setup didn't work for me too. Just ask your provider for the APN (Access Point Name) the Username and the Password and type it in Settings-network- add APN. Thats all.
For A1 /bob its:
APN: A1.net
User: [email protected]
Password: ppp
Yes, but entering the APN has not been the problem. I wanted to use the Connection Setup to add registry keys according to the WP7 guide. However, I already have solved this by using another sim of another carrier.
@oscar2010 did this work for u too?