lost my usb connection - Networking

hello i lost my usb connection from my tilt 8925 it was working fine then it stoped cant sync my phone to my pc try reloading active sync and still is dead my sync dont read the phone or my pc.please help me fix this i have tried researching and my next step was asking all of yous for help.if all and all i have to call htc or at&t ut with having all the up grades to my phone woundering if they could help me.so please reply back with some help on how to fix this thanks..

Does the pc attempt to connect? Do you receive any error messages? Please give more information.

looking for help
no there is no connection at all. i hook up my phone using the usb cable and i reinstalled my sync software and nothing happens i get a message that usb device is not working please check and try again im woundering if when i extracted a file i might have extracted a program that i needed to make this work im not sure what i could have done....please reply back if you could help would really be nice.....thank you hope you have a answer for me............

Related

XDA exec Connecting but with synchronization error :(

Hi Guys
Lately i'm having this new trouble...upon connecting my device to work laptop it's connecting and while looking for changes it's popping up with following information:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists , see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
After this error popup only 'Explore' button is enabled on my laptop's ActivieSync......
Please help me what I should do now .... I strongly believe that i'll get solution in this forum rather than O2 Customer support.
Awaiting all your expert guidances/suggestions...
Thanks in advance
I also latley get this same problem, I just sync again and its OK, but it never used to do this
Anyone to help me please .................

anyone help?lost my windows cd

my pc crashed so upon re-installing everything,i came to put active sync back on and when i attach my mda compact it dont find it,and asks for my windows ce or whatever its called cd.
i have spent two hours looking and its nowere to be found.
please help anyone know were i may get it downloaded,i have the windows code from it to prove im legit etc.
man im having a bad day.
hope someone may help as i cant back up my mda or add progs to it.
thanks very much,ta for reading
Try the uploads\app_suite folder on the ftp & download asi.exe (little surprise from TMO). Have you reinstalled the new Act.sync from M$?
Cheers, M
new err no mate
your a great help much appreciated thank you
sorry for being dumb guys but all thi stuff is new to me
how do i
uploads\app_suite folder on the ftp & download asi.exe (little surprise from TMO).
ive tired but must be gettin something wrong
thanks
Does this help ftp://xda:[email protected]/upload/App_suite/ASI.exe
page not displyed thats whay i keep getting?
Then start @ ftp://xda:[email protected]
found thanks for you time mate,sorry to be a pain thanks again
No prob. man but did it solve your prob?
my pc wont find the mda,it searches all port but fails to see its connceted,
ive tried unintsall and reinstall avt sync .
damn pc's ggrgrr lol
Correct cable, not by accident a look-a-like from a dig.camera?
nah deffo the one,i dont know wot else to try ggrr lol
Your USB port is functioning & Act.sync is allowed to use usb?
Have you tried to connect your magician to another PC via usb?
M
ill try that on another pc nice idea,
act syn runs but dont pick up the usb is used,ive swoped usb ports but to no effect,ill try another pc cheers mate
Have u got the windows cd for xperia X1
If u got it me post me to please me too lost it
tamimanieie said:
If u got it me post me to please me too lost it
Click to expand...
Click to collapse
you're wrong section !! This forum magician
You can search for Here what you need
---
download link please

Universal not able to connect to the PC for SYNC--urgent PLZ

I got the new SPV 5000 as upgrade on orange and the first thing i did was unlock it using the bootloader by BUZZ from this site. Once i unlocked the phone, it works fine, everything is great. But when i try to connect it to the PC, it gives me an error, saying download Active sync 4.1 for it, I downloaded the latest 4.2 and tried to connect my universal to it, but it isnt able to connect, i dont know why..
sometimes it just gives me an error and says, check/report error and does all the status reports and stuff, but still not luck. I connected once and then when i clicked the explore button everything was blank, cant see my device or folders and nothing at all.
Please help me if someone knows the solution to it.. Cheers
Do you have another PC with which to try it out? Maybe the activesync installation or the USB drivers got corrupt.
Also, try syncing thru Bluetooth if your PC has BT. This might isolate the problem.
hello Jorgee, thanks for the reply, Yes it did work on the other PC, so does it mean that my current Pc's USB drivers are corrupt, coz the other day my USB TV stopped working on this one too. hehehe.. any solution to this PC problem
cheers mate
I find that if I'm connected to work using the Cisco VPN Client then ActiveSync won't connect, not really a big deal I guess but annoying all the same!

Help me connect with pc

Hello, my friends!!
I've a problem and i'm hopping you can help me resolve it!!
Today i installed in my pc the new activesync 4.5, but i0m unable to make a connection between my S200 and the pc!! It just isn't recognized by the pc and it does'n syncronize!!!
Can anybody please help me??
Thanks in adcvance!!!
Ensure your network to the phone is not firewalled. In ZoneAlarm you have to change the phone network to "Trusted" zone.
V
Install this and try RDNIS or Serial
Hello and thanks a lot for the solutions you posted, but i have another problem!!!
When i try to install this software you gave me, my ppc simply refuses it because it says tha there is no digital signature on the program!!
Can anyone help me install this software??
Is there any way to overrunn this error message??
Thank you!!
@vijjay
I even tryed to connect it with the firewall disabeled, but i still can´t connect the ppc to activesync!!
Any other ideas??
Its weird, but usually any PPC can accept that software, tried it before with my Himalaya, Wizard and now my Prophet and all i did was install it and begin to use..
However, that error message usually happens when you have an Application Unlocked device, you can try to de-cert it first...it is really weird as i know, it only does happen with Smartphones..
Hello
This may appear crazy, but it worked for me unintentionally of course. I had given up on being able to sync via Activesync and was looking for a solution to backup my contacts before hard resetting my phone.
I had a permanent 'Synchronization Error', I just tried a piece of software posted here
http://forum.xda-developers.com/viewtopic.php?t=63479
This software is designed to backup contacts, but when I ran it FIXED my 'Synchronization Error', I don't know how or why, but my phone is now working with Activesync, maybe it will fix your problem too.
It won’t do any harm to try it, as all it does is create a backup of contacts.

xdaneo doesn't want to sync in any way :(. tried everything. need a master help pls

hi to all !
i recently got a German O2 XDA Neo and it's now 2 days i cannot get it synced with any pc... pls someone help, cause i'm desperate because of German OS (sry, i don't speak it well) and a whole bunch of contacts on my pc...
for the first time i tried to sync it with Windows Mobile Device Center on my desktop pc with Vista. but no luck, even then I opened all needed ports in windows firewall. no luck with getting it synchronized after soft or hard reset, restated my pc for a 1000 time and still no connection. when i tryed it on my brothers Win XP laptop with active sync 4.1 german (what was with the pda in a box) and with 4.5 active sync, again all needed TCP UTP ports open and restarted everything and tried every USB port around. still nothing ...
when changed USB cord and still no luck.
what can it be? can Neo's Mini USB slot just stop working?? or is it software issue? perhaps there is a way to flash it with other firmware from SD card?
please help, i'm all out of ideas ...
my friend try read this post it solve my similar problem there are a program call USBKILLER that helps you http://forum.xda-developers.com/showthread.php?p=1554592#post1554592
thanks , i've already managed to get my pda hotsynked on one very old pc . but i'll try tomorrow your solution on my desktop .
thanks!
still no luck .
does anyone had issues with connecting their XDA to Vista? please share your experience !

Categories

Resources