Database Users

ActiveStync won;t work

Please help:
AS - simply reports a sync error - thats it nothing else, I have reboot ed mt desktop and latpo several times.
Any ideas??

hi...
don't u think that ur problem needs a little bit more explanation than u offered,like what's ur device(obviously it's a himalaya,but what brand),what's ur OS,what version of AS are u using,what type of synchronization are u trying to establish(bt or USB),what happened,or it's the first time u try synchronizing,etc....!!!!!
plz explain more,then i'll be glad to help...if I can :wink:
RAGO :lol:

NP:
It's an iMate - it was working yesterday (Connected via USB) - today when connecting it tries to connect then just says 'Syncrhonisation Error' on Activesync main screen. That's it.
Tried a different cradle, and rebooting both DPC and PPC. still the same thing.
It has thre original ROM with WM2003.

Hi icarusbop...
try downloading AS 4.0 from the ftp or buzzdev.net,or even from M$ website,then make sure that "allow USB connection" is selected in "connection settings,it should work smoothly unless u have some hardware issue...
Note that to install AS 4.0 or 4.1,u need a windows XP OS with SP2 on ur desktop/laptop...
Good luck...
RAGO :lol:

xdaneo doesn't want to sync in any way :(. tried everything. need a master help pls

hi to all !
i recently got a German O2 XDA Neo and it's now 2 days i cannot get it synced with any pc... pls someone help, cause i'm desperate because of German OS (sry, i don't speak it well) and a whole bunch of contacts on my pc...
for the first time i tried to sync it with Windows Mobile Device Center on my desktop pc with Vista. but no luck, even then I opened all needed ports in windows firewall. no luck with getting it synchronized after soft or hard reset, restated my pc for a 1000 time and still no connection. when i tryed it on my brothers Win XP laptop with active sync 4.1 german (what was with the pda in a box) and with 4.5 active sync, again all needed TCP UTP ports open and restarted everything and tried every USB port around. still nothing ...
when changed USB cord and still no luck.
what can it be? can Neo's Mini USB slot just stop working?? or is it software issue? perhaps there is a way to flash it with other firmware from SD card?
please help, i'm all out of ideas ...

my friend try read this post it solve my similar problem there are a program call USBKILLER that helps you http://forum.xda-developers.com/showthread.php?p=1554592#post1554592

thanks , i've already managed to get my pda hotsynked on one very old pc . but i'll try tomorrow your solution on my desktop .
thanks!

still no luck .
does anyone had issues with connecting their XDA to Vista? please share your experience !

cannot sync my qtek9000 anymore

Hello there from Italy.
I posted this because of a problem that is driving me mad since some weeks. first my data.
pc:
win xp sp3
outlook 2003
active sync 4.5
qtek 9000:
win 5
sbsh phoneweaver
sbsh iLauncher
memmaid
sprite backup
The problem is that when I connect my qtek to the pc via the usb cable the pc tells me that it had a problem installing the new hardware. After that no active sync is coming out and thus no syncronization.
It is definitely a pc bug since I can syncronize my qtek in other pc.
Following some italian forum I uninstalled all usb controllers and things but had no success.
I'm desperate. Can you please help me?
My bests
Michael

Guys...................no one really can help me out?
C'mon, this is a giant leap for me but a small step for you...............
Michael

Did you uninstall/re-install ActiveSync? If not, try that.
If you have and that didn't fix it, try going to Start > Settings > Connections > USB to PC and untick "Enable advanced network functionality" then try again.

Thanks Nanoruler for your quick response.
Yes, I did try to reinstall AS 4.5 plus I have no icon for USB to PC connection in my qtek 9000.................what's going on here?
Thanks............
Michael

Try running the attached CAB

Nanoruler,
thanks a 1000 for your help. Not being a nasa computer expert, can you tell me what is the cab attached and how to use it?
Thanks in advance
Michael

Nanoruler, are you there, my friend?
I'm relying on your help for this..............
hope to read from you soon.............
Michael

Thanks a lot for this file usbswitch!!! after installing it HTC HD syncs again!

Hi Batvanio,
can you please tell me how to install it? I'm a bit beginner here............
bests
Michael

batvanio said:
Thanks a lot for this file usbswitch!!! after installing it HTC HD syncs again!
Click to expand...
Click to collapse
It's working with vista?

please..........i'm on my knees: can someone tell me how to install it? Sorry for being such a beginner but it shouldn't be such a big deal to tell me how to use this thing.
all the bests
Michael

michaelmellner said:
please..........i'm on my knees: can someone tell me how to install it? Sorry for being such a beginner but it shouldn't be such a big deal to tell me how to use this thing.
all the bests
Michael
Click to expand...
Click to collapse
Depend if you´re using Vista or XP
Vista: Windows Mobile device Center
XP: Active Sync 4.5
Just google it, download and install
Good luck,

ok. I gave it a try, but nothing new happened. I want to think it is not the usb switch fault but my lack of knowledge. Since I don't know how to install it, I clicked on the xml file. An IE page opened wanrning me of the threat running activex commands. I accepted it and clocked on run. After that I tried to hook my qtek but, as mentioned, nothing happened.
Did I install it the proper way?
please let me know about it.
all the bests
Michael

Michael, just copy usbswitch.cab to an SD card, and then find it on your Uni using File Explorer and click on it. It will then install.

Hi Jon and a milion thanks: finally someone who guided me through. Gosh, after all it didn't take that much, uh? All it took was your words.
really really thank you
Michael

iiiiiiiiiiiiiiiiihaaaaaaaaaaaaaah!!!!!
it works: after a zilion months and tests I finally got my universal to hook with my laptop again.
Thanks a lot for that USB switch: it sure helped me out on this while hundreds in various forums across the world couldn't..............
Incredible........
Michael

xda-developers - the best place for gathered information!

definitely!
michael

cant connect
Hey guys... i just bought a qtek 9000 and i can't sync it with my laptop. Running
WinXP SP3
ActiveSync 4.5
and
WM 6.1 RAN ROM
I tried the usbswich cab and nothing happened. Can you help me?
The PC installed the device but activesync is not even trying to sync the device.

Congrats on your Universal!!
Try to uncheck the advanced functionality under usb to pc
Also have a deep read here:
http://forum.xda-developers.com/showthread.php?t=549207
Hope it helps,

Big pb synchronization

Hi all
i'm using rhodium and i try to synchronize it with my outlook 2007 on windows seven ultimate.
drvupdate-amd64.exe for windows device center
but impossible to connect it i have : Microsoft Windows Mobile Remote Adapter driver with pb...
i try to uninstall reinstall many times...i never have this pb before..
first i used the original rom from htc the newest with 6.5 but impossible to connect with WMDC..
try to reinstall with nrgz28 rom...but same...
i will try to reinstall old rom from htc...but i'm not sure it will work...
do you have any idea?
(if i uncheck "Enable advanced network functionality" on usb to pc, seem to connect but nothing more happen or very very very very very slow...)
thanks
ps 1 : install first rom of htc original one...always same pb...please help need to connect it !

up..please need help

Microsoft Windows Mobile Remote Adapter always wrong....

up up up up up

kwanice said:
Hi all
i'm using rhodium and i try to synchronize it with my outlook 2007 on windows seven ultimate.
drvupdate-amd64.exe for windows device center
but impossible to connect it i have : Microsoft Windows Mobile Remote Adapter driver with pb...
i try to uninstall reinstall many times...i never have this pb before..
first i used the original rom from htc the newest with 6.5 but impossible to connect with WMDC..
try to reinstall with nrgz28 rom...but same...
i will try to reinstall old rom from htc...but i'm not sure it will work...
do you have any idea?
(if i uncheck "Enable advanced network functionality" on usb to pc, seem to connect but nothing more happen or very very very very very slow...)
thanks
ps 1 : install first rom of htc original one...always same pb...please help need to connect it !
Click to expand...
Click to collapse
Ok, here goes. I thought I had the same problem but all in all wm device center installed and I could sync, but not before searching and searching.
First and foremost, make sure wm device center is installed and updated with windows update.
2. Plug in device and wait for it to say that device software is installing.
3. Click on start button, and right click on computer. Select manage.
4. Up comes computer management.
5. Select device manager
6. Open network adapters and look for Microsoft Windows Mobile remote adapter and right click on it. Select uninstall.
7. Once it is uninstalled unplug your device and plug it back in. Should be noticed and installed and able to sync again.
I am also using windows 7 64 bit with a new TP2. If that does not work, go to this website and it has other possibilities....
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-troubleshooting.mspx
Good luck and let us know if you get it working.

thanks for your answer but..doesn't work :s
I've tried with my old phone my kaiser and it's work !...:s it's amazing...
i've plug after my tp2 and it's not working!... i've tried it on seven 32bits on another pc and it's work!... :s
i dont understand...:s

Ok, do this. Open task manager and go to Processes tab. Scroll to the bottom and look for wmplayer.exe. It shouldn't be there. Now plug in your device and watch for it to come up. If it pops up and then goes away then let me know and we'll go from there.

i never used wmplayer...
and it's not in my process...
sorry

kwanice said:
i never used wmplayer...
and it's not in my process...
sorry
Click to expand...
Click to collapse
It's not a matter of you using it or not. When you plug in and your computer recognizes it, you'll see wmplayer.exe come up and should stay up while being connected. Try one of your good phones and you'll see it pop up and stay. Just make sure you have task manager up and on Processes.
If it pops up and then goes away, there is a work around but is a big pain in the butt.
You could also have a bad phone. I know one of my HTC Advantages went bad and I had to send it in for a new one because it could not be recognized at all. I even went as far as doing a fresh install on the computer hoping maybe that would work. Turns out nothing did.
Let me know if you see the wmplayer come up or not.
I have also read that it could be a .dll issue, but if it won't work on any other computers that are working fine, then I'm going to run with a bad device.

i try with my kaiser : no wmplayer.exe or else opened juste programm for synchronisation..
and when i plug my tp2 nothing hapened..:s
crazy thing...
will i put it in my trash ? or buy an iphone lol....:s
ps : thanks for your help

kwanice said:
i try with my kaiser : no wmplayer.exe or else opened juste programm for synchronisation..
and when i plug my tp2 nothing hapened..:s
crazy thing...
will i put it in my trash ? or buy an iphone lol....:s
ps : thanks for your help
Click to expand...
Click to collapse
I had to edit because I realized I was wrong with windows seven. I believe you might have a bad phone. Have tried using mtty yet?

mtty for?
to see if i can communicate with the phone? for what use?...
thanks

mtty checks the usb connection on the device. You disable usb in activesync/windows mobile device center and then plug in your phone. Run mtty and select usb from the drop down. Then there are several codes you can enter to check for usb connectivity. What the codes are I don't know off the top of my head, but you can do a search and it will give you them on the forums. It is actually a pretty small but usefull piece of software.

thanks a lot for your advice !
i will try tomorrow too tired tonight
i think it will be the last chance after i think i will go where i bought my phone to change it, maybe there is a probleme with my phone...
thanks again

so i try this morning...
impossible to see in mtty the USB port....:s only com1 and com2
i only see usb port when i plug my phone on bootloader and i saw USB on the bottom of screen but i cant do anything....nothing work
when i plug my phone on windows seven, i can choose activesync or disk or internet share : and only the first doesnt work...:s i can use my phone like usb driver or share my internet connexion ...
i think i will phone to the shop because i'm become to be crazy !

hi so i try to test several thing :
on my P4 on windows seven 32b
- kaiser : OK
- Rhodium : OK
on my i5 750 asus p55d seven 32Bits
- Kaiser : OK
- Rhodium : NO
on my i5 750 asus p55d seven 64Bits
- Kaiser : OK
- Rhodium : NO
i dont understand...seem to have a problem with my rhodium with my computer !
i dont know why...:s very space!
have an idea?

kwanice said:
hi so i try to test several thing :
on my P4 on windows seven 32b
- kaiser : OK
- Rhodium : OK
on my i5 750 asus p55d seven 32Bits
- Kaiser : OK
- Rhodium : NO
on my i5 750 asus p55d seven 64Bits
- Kaiser : OK
- Rhodium : NO
i dont understand...seem to have a problem with my rhodium with my computer !
i dont know why...:s very space!
have an idea?
Click to expand...
Click to collapse
I know this sounds like a stupid question, but have you ran a registry cleaner or defrag program on your windows seven machine? If no then again I'm at a loss and will research this some more since I have time tonight. If so, then that more than likely is the culprit because I have ran different registry defrag/cleaner programs and once done, then windows mobile device does not function properly and I have to restore the registry from the back up that I would make prior to deletion. We'll get it figured out.....I hope.

it's really amazing... i try all the settings and all os...
for th e last try ..i try to update my bios....
and..
IT WORK'S !!
i dont know why..:s i dont know if the bios is really the problem...
when i flash the bios, Microsoft Windows Mobile Remote Adapter is ok ! without problem !
i need to delete one time the partner ship
and now all is ok !
i want to say : Just about right you are great ! you are the only one in this forum who try to help me, and it's so good! thansk again a lot my friend ! if i can help you pm me
bye !

kwanice said:
it's really amazing... i try all the settings and all os...
for th e last try ..i try to update my bios....
and..
IT WORK'S !!
i dont know why..:s i dont know if the bios is really the problem...
when i flash the bios, Microsoft Windows Mobile Remote Adapter is ok ! without problem !
i need to delete one time the partner ship
and now all is ok !
i want to say : Just about right you are great ! you are the only one in this forum who try to help me, and it's so good! thansk again a lot my friend ! if i can help you pm me
bye !
Click to expand...
Click to collapse
I'm glad you figured it out and it is strange that the BIOS fixed it, but hay if it worked, great. I know this is a constant issue for wmdc and windows mobile devices, so that is why I tryed to help out. I gave you what I learned from my experiences and searching this forum like crazy. Thank and I might take you up on the PM one day.

kwanice said:
Hi all
i'm using rhodium and i try to synchronize it with my outlook 2007 on windows seven ultimate.
drvupdate-amd64.exe for windows device center
but impossible to connect it i have : Microsoft Windows Mobile Remote Adapter driver with pb...
i try to uninstall reinstall many times...i never have this pb before..
first i used the original rom from htc the newest with 6.5 but impossible to connect with WMDC..
try to reinstall with nrgz28 rom...but same...
i will try to reinstall old rom from htc...but i'm not sure it will work...
do you have any idea?
(if i uncheck "Enable advanced network functionality" on usb to pc, seem to connect but nothing more happen or very very very very very slow...)
thanks
ps 1 : install first rom of htc original one...always same pb...please help need to connect it !
Click to expand...
Click to collapse
For future reference:
I had the same prob with energy photon/WMDC/Windows 7
Untick "ask me 1st about usb conection type" in USB to PC, then soft reset
Prroblem solved!

needed real help for upgrading 6.5

when i try to upgrade my xda!! with the usb data cable it sometimes sync with system & sometimes not. after sync when i try to upgrade it shows error 101 is there any real heroes who solve this problom !?!?
datacable is ok !

i've v1.3 xda!! it shows usb when connected with pc but not upgrading !!!!!!!
really funny for htc makers ...
it is essential to put power cradle with datacable when upgrading rom !?

where are the rom developers !?!?
hay bro give me some software or tricks which made activesync connection unbrakable coz xda!! ends partnership with pc.

it shows USB when connected with pc but can't runs the upgrade process.
bootloader screen shows USB
v1.03 without lightning screen but not upgrading !!!!

error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy

hay bro i try all that stuffs & guides but cannot get any ideas is there any tricks to make xda2 connected with system without brake it ???

can anyone gives me their sd card headers !?!?!?!?!?
it's possible afterwards putting it on sd card and then create .nbf files.

hay brothers plz help fast yaar before put it to garbage or throwing the device ha ha ha lol :*:*

hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it

maxoutputuk said:
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
Click to expand...
Click to collapse
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.

flyboyovyick said:
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
Click to expand...
Click to collapse
hay bro,
what's up ???
actually i need sd card headers from himalaya, if u've that then send it to me.

Help with upgrading from windows mobile 2003 to 6.5
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.

kaashp: Doesn't your himalaya read sd cards then?
mikeymcmk: iam willing to give you a guide, have you got msn?
i will guide you through it as your doing it.

It reads SD cards but i didnt manage to do it that way either.
I got an error message saying copy to SD card failed.
my MSN is [email protected]
if you email me at [email protected] and let me know when your online and what i need to download, il log onto MSN.
cheers mate, very appreciated.
(i receive my emails on the above email address near enough instantly)

KAASHP said:
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
Click to expand...
Click to collapse
Okay, from begining
Answer in points like I ask you questions
1. Can you enter bootloader? (serial text on screen without backlight)
2. Which Bootloader version do you have? It is written on screen when in bootloader mode at bottom (like 1.03v)
3. If you put your device into crandle (of course crandle is connected to usb in your pc/laptop) do USB text appear in place where Serial text was already?
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
5. Do you have nk.nbf and Upgrade.exe or HimaUpdate(...).exe in THE SAME folder?
6. What happens if you run update application and click Next?
7. Did you tried to run in administrate mode?
8. Do you have x64 system?
9. Do you have himalaya? put out your battery and check if it is written PH10B or PH10A.
10. Did you tried another PC or another crandle?
11. Which rom you want to flash?
Answer here.

HI,
1. yes
2. v1.01
3. yes USB is displayed
4. windows 7. ( i have XP aswel which i tried and failed also)
5. Yes. Both files in same folder on my desktop.
6. it says checking information on your PDA then says connection failed.
I tried it when not in bootloader mode aswell and it said it was erasing everything off my PDA but then said connection failed straight away.
7. Yes tried it in admin mode but same error messages.
8. no not using x64 system.
9. under the battery it says PH10B
10. Yes, tried my laptop and also my desktop.same errors on both of them.
11. Ive tried a few ROMs. any ROM will do realy. just want to get rid of windows mobile 2003.
Thanks for your quick replies.
ive updated alot of phones from windows 2003 to windows 6.5 but this 1 is just stubbon lol.
could it be the handset is faulty?
im waiting for another handset to come which is identical but originaly on T-Mobile not O2 like this 1.

sorry for not getting back to you im only a noob 2 things may be wrong sounds like faulty socket on phone or faulty cable/cradle try wobbling the cable gently when connected all sounds obvious but we are talking grandad of mobiles you cannot as far as i know go strait from 2003 to 6.5 i just got to 6.5 if you get a stable connection you have to go 2003se then 5 from there went to swampys blue silk now aeroflylubys hybred 6.5 all running perfect also athers memory program came in handy i used microsoft activsync 4.5 for xp win7 is a brill os but xp did it for me

aeroflyluby said:
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
Click to expand...
Click to collapse
ROFL! amiga!!! AMIGA FOREVER!!!!

Ive just had another O2 XDA II and a TMobile MDA II throught the post.
ive just ordered a new cradle today aswell, as the 1 I was using was slightly cracked on the bit that connects to the phone.
So that might of been the problem.
im unable to test until the new cradle comes (hopefully in the morning)
il keep you posted.
cheers

Hey! Mikey! Join our irc channel:
Server: irc.afterx.net
Channel: #himalaya
Or anyone can join who has anything to discuss about the htc himalaya.