I know that when u get an incoming call you can answer either from the phone or from the bluetooth headset. But sometimes when I use my phone to dial a number I realize that its connected to the headset after that person answered. Is there a software enabling to switch from headset to phone and vice-versa during a call??!
salahnajm said:
I know that when u get an incoming call you can answer either from the phone or from the bluetooth headset. But sometimes when I use my phone to dial a number I realize that its connected to the headset after that person answered. Is there a software enabling to switch from headset to phone and vice-versa during a call??!
Click to expand...
Click to collapse
Option under the phone menu to Turn Hands Free on/off.
Related
I am using a Plantronics 510 BT headset, but i can't figure out how to get the voice activation working.
I beginning to think that it is not supported, read the manual and afaik it doesn't mention the subject at all.
Has anyone got it working yet?
Tiemen said:
I am using a Plantronics 510 BT headset, but i can't figure out how to get the voice activation working.
I beginning to think that it is not supported, read the manual and afaik it doesn't mention the subject at all.
Has anyone got it working yet?
Click to expand...
Click to collapse
I am not sure I understand your question but I use a SonyEricsson stereo BT headset and when I press the "answer" button on the headset (when phone is not ringing) the "Voice Speed Dial" program comes up.
It does the same with all my jabra
Yes the voice dial function to dial numbers and startup programs is what I meant.
I got it working now
Apparently I have to hold down the button for a second or two to make it work.
Next time I should try a little harder to figure it
anonimo said:
I am not sure I understand your question but I use a SonyEricsson stereo BT headset and when I press the "answer" button on the headset (when phone is not ringing) the "Voice Speed Dial" program comes up.
Click to expand...
Click to collapse
Hi,
I've got a SE BT HBH-660 and when I push the asnwer button, I4ve got the "beep beep" in the speaker telling me that the Headset try to connect to the phone, but for some reason the Phone does not wake-up each time.
To make the voice dial working I need to ON/OFF the BT stack on the phone side.
When my SE BT headset is on and I make a phone call, not all the time the phone connect to the headset.
Did someone figure out the same behaviour ?
If yes how does it solve this ?
Hi All: I have paired the headset fine with my phone and made calls before but I can not switch a call from the handset to the headset while a call is already in progress. Once I end the call, I can pair the headset fine to make a NEW call but I'm having problems switching the call when it is already in progress. I can go to the phone and manually switch it to hands free but I thought that if I powered on the headset while a call was already in progress, that would route the conversation from the handset to the headset. Is that correct or can it not do this without some tweaking? Thanks.
I have the same setup and I can answer the call on the phone, then "open" the H700 and the phone re-directs the call thru the headset within about 2 seconds from opening the headset.
If I'm on the headset, I can press and hold the call button on the H700 and the call goes on hold. I can "close" the headset and then un-hold the phone using the touch screen and resume the call on the 8525.
Now I believe that the standard bluetooth stack is crap, and I have had many instances where the phone just stops linking the Bluetooth. I can usually restore the link just by using the comm manager to turn off the bluetooth radio, then turning it back On. I have even done this during a call and it worked.
I have always had solid, loud audio with the H700, BUT, several callers have mentioned that my voice was often clipping a word every few seconds. I don't know what that's all about.
Do you know whether you need to select any special settings or do anything special in the pairing setup with the phone or headset? I do not know how to have the conversation directed to the headset after turning it on when I am already on the call. It works fine to start a new call or to answer a call directly through the headset but can't join a call in progress. Would appreciate anyone's help. Thanks.
HI all,
I got a t-mobile Vario II and have a plantronics 655 handsfree. I have searched the forum but found nothing that answers my problem.
I want to be able to answer a call from the phone and when the handsfree is paired the sound to come through the handsfree. I have tried a few handsfree kits but none seem to work and all the calls come through the phone until i pull the handsfree out of my ear hit answer n put it back in. Am i missing something? I want to be able to answer a call from the phone and talk through my handsfree. When i make a phone call however from the phone it works fine and the sound comes through the handsfree like it should.
I read something about a handsfree profile...where is that? i don't have a handsfree profile option on my phone. Is it an add-on. I tried the handsfree with my ericsson phone and when u answer from the phone it asks if i want the audio through the handset or the handsfree..
hellpppppp...its driving me madd lol
I Take it no one knows the answer to this or has created a patch? Does everyone answer there phone from the answer button on the bluetooth handsfree then? ??
What you are trying to do, is contrary to the feature designed into your dialer. When you answer the phone call from the phone instead of the connected headset, you obviously wanted to talk via the phone not the headset so that is where it routes the call. You can get it back to the headset after you answered on your phone by selecting the menu option and selecting "Turn Handsfree On".
similar issue
I have an ATT branded 8525, and a Motorola H550.
I'm using the built in voice dialer, as I really don't feel like shelling out any more money for voice commander, when I'm paying for the spb products I have (pocketplus, mobile shell, and phone suite).
With other phones, I could use the phone (by hand) to dial a number, while wearing the BT headset, and it would automatically put the conversation on the phone.
This doesn't.
Also, when I receive a call, I don't get the ringtones I have selected for specific callers, just a generic beep.
Morgan
That issue is actually unrelated. The issue that arnie_ahu has is trying to do something differently than the phone design. However, your issue is a real issue. Dialing on the phone and pressing call should send the call to the headset if it is connected properly. The ony conclusion I can think of is that it is not connected properly as a headset.
In my experience, this is Bluetooth device specific. When I use my Jawbone, I can answer on the phone and the conversation will be on the Jawbone. However, if I use a Plantronics 320 and answer on the phone, the conversation will be on the phone.
The reason why I answer using the phone instead of using the Bluetooth headset is out of courtesy to the caller. For some reason, when I answer with a Bluetooth device, the caller hears a very loud sound that is reminiscent of a fog horn. I have experienced this with multiple phones and headsets. I am guessing this is related to the Bluetooth handshake.
edited: spelling correction.
It may be (for me) because I am using mp3 ringtones on a mono earpiece.
From what I have found on line, that won't work with WM5, which sucks, because it worked on my old piece of crap nokia 6230.
Why oh why must this be so hard?
Now I have to try and convert the mp3 ringtones I made from full songs to something the phone will use.
I just bought a bluetooth headset (SE DS220) which is working great - I listen to music and take/ring calls. However i have two strange issues I wonder if it is possible to fix:
1. While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
2. When I receive an incoming call I have to answer it with the button on the bluetooth unit - if I answer with the phone then the call is switched to the phones speakers. Is it possible to change this behaviour?
Thanks in advance!
/Hass
If your Device switch to the Phone Speaker ... you havent connect the Headset Profil in the Blue Tooth config.
NetrunnerAT said:
If your Device switch to the Phone Speaker ... you havent connect the Headset Profil in the Blue Tooth config.
Click to expand...
Click to collapse
There is a tick in the box for the headset profile and the icon comes up in the status field. It only switches if I answer with the buttons on the phone.
Noone has any ideas? Hasn't anyone else this problem?
I am not sure, but why dont you just answer the call with the headset.
PseudoReal said:
I am not sure, but why dont you just answer the call with the headset.
Click to expand...
Click to collapse
That's what I do - my biggest issue is the first question:
While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
BT headset problems
I have an xda2 i and I have the problem that even when the headet is connected, at times an incoming call won't broadcast over the headset at all, and equally if i dial out the call doesn't transfer to the headset.
Curiously, I've found the solution is to go into bluetooth manager -->active connections--> and click on STATUS of the head set connected. it should show signal strength and such. I double click on the CONNECTED message (oor maybe somewhere on the screen, basically double tap until it reads NOT CONNECTED ..... as odd as it sounds... this is what i needed... as when I do this, it usually works ok for me.
Maybe it will help?
..........IB a n e
Hi,
After a long time i have restarted to use bluetooth headset and i have to travel to work .
Just one question to experts.
During incoming call i hear a ringtone in my bluetooth headset and handset but when i answer the call the conversation works only in the handset. I have to select handsfree mode after i answer the call to talk through the bluetooth headset.
Is there a way to make bluetooth work first, instead of having to transfer the call to the headset ?
Edit :I am using WM6.5 rom and nokia hb 103 bluetooth stereo headset
I thought i found something but i was wrong.
A bump to get some notice