Bluetooth headset and phone speaker questions - Touch Dual, MDA Touch Plus General

I just bought a bluetooth headset (SE DS220) which is working great - I listen to music and take/ring calls. However i have two strange issues I wonder if it is possible to fix:
1. While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
2. When I receive an incoming call I have to answer it with the button on the bluetooth unit - if I answer with the phone then the call is switched to the phones speakers. Is it possible to change this behaviour?
Thanks in advance!
/Hass

If your Device switch to the Phone Speaker ... you havent connect the Headset Profil in the Blue Tooth config.

NetrunnerAT said:
If your Device switch to the Phone Speaker ... you havent connect the Headset Profil in the Blue Tooth config.
Click to expand...
Click to collapse
There is a tick in the box for the headset profile and the icon comes up in the status field. It only switches if I answer with the buttons on the phone.

Noone has any ideas? Hasn't anyone else this problem?

I am not sure, but why dont you just answer the call with the headset.

PseudoReal said:
I am not sure, but why dont you just answer the call with the headset.
Click to expand...
Click to collapse
That's what I do - my biggest issue is the first question:
While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.

BT headset problems
I have an xda2 i and I have the problem that even when the headet is connected, at times an incoming call won't broadcast over the headset at all, and equally if i dial out the call doesn't transfer to the headset.
Curiously, I've found the solution is to go into bluetooth manager -->active connections--> and click on STATUS of the head set connected. it should show signal strength and such. I double click on the CONNECTED message (oor maybe somewhere on the screen, basically double tap until it reads NOT CONNECTED ..... as odd as it sounds... this is what i needed... as when I do this, it usually works ok for me.
Maybe it will help?
..........IB a n e

Related

how to transfer phone call from bluetooth headset to Xda II

hello, everyone:
anybody know is there is any possibility to transfer phone call from bluetooth headset to Xda II, if I already use bluetooth headset to pickup phone :?:
Thanks
Have you tried clicking the headphone icon in the top status bar?
when a call comes into the phone, a dialog box pops up, allowing you to transfer the call to the phone. how long this stays there i do not know. the other option is to turn on the speaker phone by holding down the green button.
hope this helps
Smiley
As griffog indicates, click on the headset icon on the XDA II. A balloon window will pop up indicating that the "Bluetooth headset is on". Simply tap "Transfer call to phone", and there you have it!
HTH!
when I pick up phone, I don't have "headphone icon"
I guess that because I install "Pocket Bluetooth Tools" software
so maybe problem is the Pocket Bluetooth Tools
anyway, Thanks~
in my BlueTrek G2 headset, if you puch the "Talk" button for 2 sec during the call, it will be transfered to the device ... I guess this is a common feature in all headsets ... just try it
Biso007 said:
in my BlueTrek G2 headset, if you puch the "Talk" button for 2 sec during the call, it will be transfered to the device ... I guess this is a common feature in all headsets ... just try it
Click to expand...
Click to collapse
Thanks, I try this solution in my SORRYEricsson HBH-65 Headset, it not work, just can turn off my Headset.
Ha Ha~
I agree about the SE HBH 35 poor flexibilitity with my Qtek 2020. But as most of the "Blue tooth blues" regarding the XDA II, it's in part to HTC/M$ blame, since the same headset does an impressive job with my SE T-68 phone: voice dialing, call transfer to/from head set, head set incoming caller voice ID, etc.
So I keep thinking that BT is the worst part of the XDA II.
:evil:
BRosenow said:
As griffog indicates, click on the headset icon on the XDA II. A balloon window will pop up indicating that the "Bluetooth headset is on". Simply tap "Transfer call to phone", and there you have it!
HTH!
Click to expand...
Click to collapse
And to trasfer the call from Phone to Headset? Is it possible?
There is little information about this subject in the user manual - but I have tested this with my i-mate and SE HBH-30 BT heaset.
If I answer an incoming call with the headset and then transfer that call to the phone, I can then press the button on the headset and transfer it back.
If I make a call with the phone or answer a call with the phone, I can find no way to transfer it to the headset. Sorry.
HTH!
BRosenow said:
There is little information about this subject in the user manual - but I have tested this with my i-mate and SE HBH-30 BT heaset.
If I answer an incoming call with the headset and then transfer that call to the phone, I can then press the button on the headset and transfer it back.
If I make a call with the phone or answer a call with the phone, I can find no way to transfer it to the headset. Sorry.
HTH!
Click to expand...
Click to collapse
Ok Thankx

is there a way to better control bluetooth headset?

I know that when u get an incoming call you can answer either from the phone or from the bluetooth headset. But sometimes when I use my phone to dial a number I realize that its connected to the headset after that person answered. Is there a software enabling to switch from headset to phone and vice-versa during a call??!
salahnajm said:
I know that when u get an incoming call you can answer either from the phone or from the bluetooth headset. But sometimes when I use my phone to dial a number I realize that its connected to the headset after that person answered. Is there a software enabling to switch from headset to phone and vice-versa during a call??!
Click to expand...
Click to collapse
Option under the phone menu to Turn Hands Free on/off.

(help) bluetooth headest and x1 not ringing

hi, and thank you for viewing,
when i connect my bluetooth headset my x1 wont ring anymore. it vibrates and rings through the earpiece but not outloud.
i dont wear the earpiece until i get a call as i find it uncomfortable so i get a lot of missed calls.
i have looked through the settings but must be missing somthing can anyone help me?
thank you for your time
never heard about any bluetooth able phone being to direct audio to a headset while still playing it out it's speaker
people seem to use the headset to save other people from ringning apart from the handsfree thing
thanks,
what i mean is i want the X1 TO ring as normal so i know someone is ringing,
at the mo i have a bluetooth earpiece and when someone calls, my X1 is silent and the ringtone is played through the earpiece.
as i dont wear the earpiece until i recieve a call due to comfort i miss many calls when im in the car.
im sure it never done this in R1A but not certain
It should normally ring...my phone and bluetooth both rings at the same time....may be goto bluetooth select the device and only keep a check on handsfree option....
well after updating to R3A the problem is now resolved.
Another one of those "dunno what it was but its working now" things
thank you for your help

Turn on ringtone while having headset inserted ??

Does anyone know if it is possible to enable ringtones and smstones when I have my headset inserted ?
I mean: You should be able to hear the phone ring or your smstone as there is no headset attached..
The reason is that I use my phone as mp3 player at work. But when I take of the headset, there is no chance of hearing if I get a call or a sms. Plugging and unplugging the headset all the times makes me go insane..
I hope there is a tweak or an option to solve my problem!
TIA
i'd like to have such a tweak too.
ive got a desktop cradle with line out but no speaker connected. the phone thinks a headset is attached...so i cant hear any incoming calls while having the td2 in the cradle.

Bluetooth during incoming call ?

Hi,
After a long time i have restarted to use bluetooth headset and i have to travel to work .
Just one question to experts.
During incoming call i hear a ringtone in my bluetooth headset and handset but when i answer the call the conversation works only in the handset. I have to select handsfree mode after i answer the call to talk through the bluetooth headset.
Is there a way to make bluetooth work first, instead of having to transfer the call to the headset ?
Edit :I am using WM6.5 rom and nokia hb 103 bluetooth stereo headset
I thought i found something but i was wrong.
A bump to get some notice

Categories

Resources