Does anyone know if it is possible to enable ringtones and smstones when I have my headset inserted ?
I mean: You should be able to hear the phone ring or your smstone as there is no headset attached..
The reason is that I use my phone as mp3 player at work. But when I take of the headset, there is no chance of hearing if I get a call or a sms. Plugging and unplugging the headset all the times makes me go insane..
I hope there is a tweak or an option to solve my problem!
TIA
i'd like to have such a tweak too.
ive got a desktop cradle with line out but no speaker connected. the phone thinks a headset is attached...so i cant hear any incoming calls while having the td2 in the cradle.
Related
Greetings,
I'm using a Sony Ericsson HBH-DS970 stereo Bluetooth headset with my TyTN and so far I have only one gripe - when the headset is connected, the ring tone somes through the handset only, not the phone itself, which means that I'll miss any incoming calls if I don't have the earbuds inserted.
Also, the ring tone sometimes does not start until about 20 seconds after the display has started to announce the incoming call.
I tend to have the earbuds hanging from my neck if I'm not listening to music, and the ring tone is not loud enough to be heard that way.
I suspect this may be by design, because it's assumed that a stereo Bluetooth headset is always in/on the ears when connected to the phone, but I want to use the 970 as my only headset even when I'm not about to listen to music.
Is there any way to get a ring tone from both headset and phone?
/POL
?
Anyone figure this one out yet? I have the same problem...
same here, anyone find a solution please post, I think I can change it from the registry I will check it.
Can I ask you folks a question relating to the use of the headset Sony Ericsson HBH-DS970 with the HTC Hermes...do you get all the functionality ie caller ID, the ability to accept and reject the call, compatible with mediaplayer etc.
I have a concern that with the headset not being a HTC product, perhaps some of the Sony functionality may not work with the handset.
Thx
From my experience the ringtones will not come to the speaker if you use the headset as wireless stereo. I only use the headset as handsfree, which makes the ringtones go through the phone.
I used the DS970 for two week with my O2 Trion,feature like Caller Display is No any problem,But when using media player sometime it may out of control, like cann't accept call and control volume or stop.
And the sound quality is acceptable,but it will stop few second after 1 or minutes, I have change the regedit.
May I know is there any way to fix it?
Still no solution?
Anyone come up with a solution to this problem? It really bugs me not to get a ringtone from the unit itself, just thru headset... Works just fine with my old mono handsfree, would be great to have it in the stereo heaseat to...
i have the same problem
hello i have the same problem
the ring sound is only on my headset i have tested with 1.13.097fr and now 1.13.234fr if anybody have the ring on the phone with a headset stereo a2dp cang give us is configuration rom and other soft for the bluetooth.
thank and sorry for my english
juste a little frenchy
There seams as if there's no solution in sight, I got the exact same problem, also with HBH-DS970 and with Jetware Mobile's "Hands-free extension" installed.
I'm still running WM5, anyone who have tried WM6?
/Fluff
Same "design feature" here with my HBH-DS970 and HTC S710 WM6 Smartphone, so it's not ROM, device or OS version specific. I would suggest this is by design.
I'm pretty sure this is by design since thats how it works on my BT8010. Its stereo so it seems to make sense all sounds go through headset although it would be nice if it was an option. The BT8010 has a button on the headset to take it out of music mode so then they will go through the phone but I guess that doesn't help any of you out much.
Another option would be to just uncheck wireless stereo in the pairing and just check it back when you want to do wirelss stereo.
Hi folks,
can anybody confirm this behavior ?
When I plug in my headset, my ameo still plays the ringtone from ist speakers on an incoming call (yes, the ringtone is also on the headset).
Is there an option i missed ?
Thanks for your help, best regards.
I find this extremly handy, when im driving I dont have the earphone in my ear all the time. It also does it with a bluetooth headset. im sorry I don't have the answer.
first off, i love al bundy
ok now that thats over.... what headset do you have, is it bluetooth or wired headset
I just bought a bluetooth headset (SE DS220) which is working great - I listen to music and take/ring calls. However i have two strange issues I wonder if it is possible to fix:
1. While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
2. When I receive an incoming call I have to answer it with the button on the bluetooth unit - if I answer with the phone then the call is switched to the phones speakers. Is it possible to change this behaviour?
Thanks in advance!
/Hass
If your Device switch to the Phone Speaker ... you havent connect the Headset Profil in the Blue Tooth config.
NetrunnerAT said:
If your Device switch to the Phone Speaker ... you havent connect the Headset Profil in the Blue Tooth config.
Click to expand...
Click to collapse
There is a tick in the box for the headset profile and the icon comes up in the status field. It only switches if I answer with the buttons on the phone.
Noone has any ideas? Hasn't anyone else this problem?
I am not sure, but why dont you just answer the call with the headset.
PseudoReal said:
I am not sure, but why dont you just answer the call with the headset.
Click to expand...
Click to collapse
That's what I do - my biggest issue is the first question:
While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
BT headset problems
I have an xda2 i and I have the problem that even when the headet is connected, at times an incoming call won't broadcast over the headset at all, and equally if i dial out the call doesn't transfer to the headset.
Curiously, I've found the solution is to go into bluetooth manager -->active connections--> and click on STATUS of the head set connected. it should show signal strength and such. I double click on the CONNECTED message (oor maybe somewhere on the screen, basically double tap until it reads NOT CONNECTED ..... as odd as it sounds... this is what i needed... as when I do this, it usually works ok for me.
Maybe it will help?
..........IB a n e
hi, and thank you for viewing,
when i connect my bluetooth headset my x1 wont ring anymore. it vibrates and rings through the earpiece but not outloud.
i dont wear the earpiece until i get a call as i find it uncomfortable so i get a lot of missed calls.
i have looked through the settings but must be missing somthing can anyone help me?
thank you for your time
never heard about any bluetooth able phone being to direct audio to a headset while still playing it out it's speaker
people seem to use the headset to save other people from ringning apart from the handsfree thing
thanks,
what i mean is i want the X1 TO ring as normal so i know someone is ringing,
at the mo i have a bluetooth earpiece and when someone calls, my X1 is silent and the ringtone is played through the earpiece.
as i dont wear the earpiece until i recieve a call due to comfort i miss many calls when im in the car.
im sure it never done this in R1A but not certain
It should normally ring...my phone and bluetooth both rings at the same time....may be goto bluetooth select the device and only keep a check on handsfree option....
well after updating to R3A the problem is now resolved.
Another one of those "dunno what it was but its working now" things
thank you for your help
Hi guys,
I have a question about BT headset.
I have a JABRA BT 8040 connected to my HD2. When my phone is ringing I still hear the same sound in BT headset( like ..turut-turut..) doesn't matter how the phone is ringing/what ringtone I using. I also using this headset with my workphone Nokia 3110c and on that I hear the same tone in BT like its coming from phone speaker.
Any idea where is the problem? Why can't hear the HD ring sound in my BT headset?
I think the sound you hear is the Microsoft Voice Command ring sound. I use the MSVC ALOT so I don't want to turn mine off, but try and turn off yours and see if that changes the ring sound in your earpiece.
starstreak said:
I think the sound you hear is the Microsoft Voice Command ring sound. I use the MSVC ALOT so I don't want to turn mine off, but try and turn off yours and see if that changes the ring sound in your earpiece.
Click to expand...
Click to collapse
How can I switch off the MSVC ??? couldn't find any option for that.
I have a Energy ROM and I just can't see that