Downgrading WM6 to WM5 - 8125, K-JAM, P4300, MDA Vario General

I had my HTC wiza200 unlocked (SIM & CID)..it was Tmobile.and did upgrade to WM6 from instructions from this site..but it was not fast enough....even though it was OK reception wise and thrz no heavy battery drain...now i want to downgrade back to WM5...any help will be appreciated,Thanks in advance.
Current ROM:
IPL:3.08
SPL:3.08
Radio:02.47.11
OS:11.0.1.0

Simply install your oem carrier rom. Your tmobile so that should be 2.26. just download it and install it. Thats it.
Jeff

can u direct me to link to get it?
"oem carrier rom. tmobile"
Current ROM:
IPL:3.08
SPL:3.08
Radio:02.47.11
OS:11.0.1.0
Location:INDIA (Calicut)

Near the middle (G3.7) of the 1st post in this thread you will find the Tmobile 2.26 rom.
Jeff
http://forum.xda-developers.com/showthread.php?t=298613

Huh...Thanks a lot for ur prompt reply !! will try...THANKS again !!

am downloading it right now..
do i need to format (is this hard reset?)..i want a clean install with no left overs from previous installations !!
\sorry for new bee questions !!

Whenever you flash a carrier rom you have a fresh install. Carrier roms are the equivalent to formatting your hd and reinstalling a fresh copy of the os.

even the IPL/SPL and radio will go to carrier ? or just the OS ?
Current ROM:
IPL:3.08
SPL:3.08
Radio:02.47.11
OS:11.0.1.0
Location:INDIA (Calicut)

Related

ROM upgrade what happen with SIM (un) lock

Just downloaded instructions & files from O2.UK for newer version of the Rom (3.17.03) and Radio (4.21). Instructions seem quite standard and straight forward (alsways backup & charge battery) - however the most important question is :
At this moment my XDA is unlocked - what will happen when I update ROM and Radio - will it be locked again?
if you can please let me have the answer.....
thanks in advance
No.

Wizard/MDA Upgrade Procedure...

Some info about my phone
IPL 1.08
SPL 1.08
GSM 01.09.10
OS 1.8.10.2
I would like to upgrade to the latest i-mate rom ( i think ) i don't know any differences with any other roms etc... ive been looking on the other threads maybe if my question has been answered with someone else... i can get pointed to a proper thread, i just want to know what steps i should take to upgrade my rom, i dont wanna lose any data, not that i have much id like to backup my contacts basically thats the most important, also.. since i dont have money for a 128 card right now would it be possible to load someone elses backed up tmobile mda rom ? if they zipped it up and sent it so i can restore it when i get a msd card.. any help is greatly appreciated , thanks in advance.
Copy your contacts by ActiveSyncing them to a PC, or copy your pim.vol (in the root of your Device) to your SD card and upgrade it.
Good luck.
Ahhh
Ah okay now... which rom should I try out first ? and... don't i need to CID unlock it? i'm trying to find a good thread on the upgrade procedures and the best rom to try first.
Best rom...best rom..... the Rom you choose is a personal choice (and yes, you need to CID unlock first IF you want to upgrade to a Rom of another manufacturer, if you have lets say T-Mobile and you want to upgrade to another T-Mobile Rom, you don't have to CID unlock your Wizard).
I like the Qtek Roms myself, but then again, I only use Dutch Roms, not WWE (WorldWideEnglish) Roms, so I have to make a choice between T-Mobile or Qtek and then the choice is simple in my opinion
If you don't know anything about upgrading, my opinion is, try soms official Roms first, then you know what the deal is and then you can make a choice if you maybe want to use a customized Rom like the Mr. Clean Roms for example.
Regards,
Molski
p.s. There are A LOT of threads about upgrading.
Ah thanks for the info... i tried a beta 2.24 rom i think... its pretty nice, i personally cant tell much of a difference,, connmgr is different has more options etc... im thinking of trying mr clean 2.3 is the latest right ? and if i get this does it include all the office apps and such ?
a second question... i dont like the wifi apps included and i noticed an AXIM dell PPC with WM5 had a nice wifi config app/wifi AP finder, and noticed it was made by Hi Tech Computer (HTC) any way to copy this or use it on my phone ?
check my other thread about my CID unlock problem and let me know if i should try to CID unlock it again... and backup... thanks!!

Backup of ROM?

Hello.
I want to change/upgrade my ROM to WM6. But I want to make a Backup of my existing from first (maybe I'm to stupid to do the Update) and to have the chance to get my MDA Vario back to life I want to make a backup of the ROM is installed at this time.
Could somebody maybe tell me how i can backup my ROM? And... How can I reinstall the ROM? I think it will be moved to the SD Card?
Thanks a lot.
You might want to try this then first:
http://forum.xda-developers.com/showthread.php?t=305294
Thanks for this.
May problem is that I have a "very" new ROM installed (T-Mobile MDA Vario 2.21.2.8 GER). and I'm unable to complete the the CID unlock process (the Netlock is removed allready with the lokiwiz 3a.).
If I'm entering the Bootloader and open mtty I'm .not able to open the USB port.
Does it mean I need to downgrade?
Thanks Maik
There is a newer public T-Mobile ROM on the T-Mobile website: Version 2.26.2
You need to downgrade your ROM to custom 1.05 (check the WIKI page) in order to run lokwiz CID unlocker!
I tried the version 3 of lokwiz but the only one which worked properly on my MDA was the version .2b
How ever,
the CID lock should not effect the MTTY utility. This is an official HTC procedure and should work on any WIZ.
UPDATE:
I just saw that you're talking about a german ROM? The latest public german ROM is 3.3.8 (check the german T-Mobile site for that!). If you want to keep the older 2.21 you can find it at the Austrian T-Mobile site again after downgrading and unlocking your CID
I am running the german rom AKU3.3 myself - it is much nicier than previous versions and has already some WM6 features integrated.
Ok. So I need to downgrade my Device. to do the CID unlock.
Maybe the system firewall and some other settings are affecting the MTTY issue.
I checked the T-Mobile website for the newer German ROM version.
If I check https://after-sales-service.t-mobile.de/eg_online/t-mobile/t_mda_vario.htm (what my Device is) I only see the 2.21 version and NO newer version?
1.
Go to www.t-mobile.de
2.
Click on top on the menu "HILFE & FAQ"
3.
Select on that site "Broschüren & Software"
4.
Now click on the left site menu on "T-Mobile Software"
5.
It takes you to a new page and asks you for your MDA. Don't worry if your PDA is not in the list! Just choose any PDA. It will take you to a new page and show you the selected PDA. Right underneath you will see a link: "Model aendern" - click on that link and then chose as Manufacturer T-Mobile and you will find the MDA VARIO!
Sorry for being so complicate but the T-Mobile site is set up with Flash, so, you can't just copy the link! You always have to go the loooong way! Be aware that you have to temporarely allow popup's ... !
How ever,
I will try to paste the link here to the direct download and I hope it works:
http://www.t-mobile.de/downloads/t-mobile/ruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship.zip
Hey the link works....
Thanks. I find out that my Device is a G4 device and I also see that I can't unCID this device... Right?
I'm a little bit in fear that something is going wrong during the Update to WM6 and I have no working Backup on my SD card.
Ok. So this steps I will do. Maybe you can currect me if I'm wrong.
1. I will perform a downgrade to the custom rom 1.05 and then I make a backup after running CID unlock.
2. I make a Backup with the MTTY
3. I will install the WM6
4. If not working I can backup from SD card and maybe install the newest ROM
You only should downgrade for CID unlocking your device! This is required for installing other ROMs than from your cell phone provider!
If you want to upgrade to the new german AKU3.3 from T-Mobile - that should work without CID unlock! You also should be able to downgrade to your existing ROM version in case you just dislike the new AKU3.3
BTW:
If you're planning to upgrade to a selfmade WM6 which you can find all over the web: I tried almost all of them! None was as stabile and good as the german T-Mobile AKU3.3! Sure, they look cute with their VISTA-style look but the functionality is far away from being perfect! Also: Lots of the ROMs are very user-personalized and contain no configuration for your network (such as GPRS and MMS) - my advice: stick to your provider ROMs, either AKU2 (which you're currently running) or the newer AKU3.3 from the link above - at least until you learnt flashing and registry hacking on your device!
WOW I allready can hack the Registry but having sometimes some issues with instructions here . Like I say before... I'm a little bit in fear...
Well, it is understandable! Noone wants to end up with a brick!
There is always a risk in flashing devices! I do it since years now and was unlucky only once by flashing a SIM locked ROM to a Motorola phone. Haven't had any problems since then. The best thing is READING and if you can't find answers just post your question. Next to it is always helpful to check also other Forums or try to find guides in your own mother tongue!
Hacking the registry is not really riskfully - at leat the only one thing what can happen is that your device won't start up and you might lose your files and data. Other than that you should be able in any case to get it running with a hard reset again by holding CON button and Voice Dial button at the same time and press Reset.
Flashing can destroy the device because of it actually erases everything in the device; even the ROM before it writes the new one. But even here you will be able to enter in BOOTLOADER mode in most cases.
Yeah thats right Junner. Reading and asking... Since I flashed my SDA wrong I'm happy to have a Backup on the SD card to get the Image back. If this is the case I'm happy.
I installed AKU 3.3 and it's looking good and working fine.
Maybe I will downgrade to the custom 1.05 and do a backup. I only want to look how the WM6 is looking.
Are you German? Or german speeking?
The ROM backup to SD card via MTTY should work without CID unlocking your device! There is no need to downgrade for that purpose. I had hard times by doing it too. It took me several trials until it worked finally!
The downgrade is only necessary if you're planning to install ROMs from other providers or ROMs in other languages. I asume you're german, so, if you don't believe anything I say - this you can believe: the german AKU3.3 is the best out there you can find for the WIZ
Like I mentioned earlier: all the WM6 ROMs you will find all over the web are user created! They are either taken off from other devices and changed around until they worked on the WIZ or just visual pepped up AKU3.3 ROMs (the one you installed now). Allthough, I did not find any WM6 out ther which did not have issues in one way or another ...
I speak a little bit german , yeah!
We have WURSTFEST here once a year with lots of Sauerkraut and beer ...
Mates, if I read my rom am i going to be able to copy it to pc and Dump it with a ROM Kitchen?

Upgrading the Wm6 to Wm6.1

i had HTC p3300 (atremis).
kindly help me to upgrade my mobile to WM6.0 to Wm6.1 (with latest ROM)
Current Specification
ROM version : 3.7.707.1 WWE
ROM Date : 21/06/2007
Radio Version : 02.69.90
Protocol verison : 4.1.13.30
EXtROM verison : 3.6.707.101
What dou you need?
Have you searched something?
Have you open the first posts on Artemis upgrading seccion?
I would suggest that before u upgrade ur phone read this thread properly to understand the procedures and risks involved in flashing a ROM http://wiki.xda-developers.com/index...me=HTC_Artemis
1. In order to flash a ROM on ur HTC P3300 u 1st need to CID Unlock your device, that way u'll be able to flash a ROM on to ur phone REMEMBER to CID Unlock your device before doing anything otherwise u'll brick your phone. You can get the CID Unlocking software frm here http://forum.xda-developers.com/showthread.php?t=311403.
2. After you are done wid the 1st step u've now CID Unlocked your device and it is ready for a ROM upgrade. Select and download a ROM of you choice frm here http://wiki.xda-developers.com/index...mis_DumpedRoms (I personally prefer the Black and Blue ROM http://forum.xda-developers.com/showthread.php?t=364883) flash the ROM on to your device and after the reboot u'll have WM6.1 .
3. Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities. You can find the latest Radio ROMs here http://wiki.xda-developers.com/index..._RadioUpgrades.
But please do read the thread i mentioned in the beginning.
Thank u for the reply...
i saw the first posts on Artemis upgrading section...
Its tells about the USPL and related to the upgradtion...
i have one more clarification regarding this..
did the Artemis_USPL pakage contains the ROM or not ?
No. The USPL does not contain the Rom for P3300
peppercon said:
I would suggest that before u upgrade ur phone read this thread properly to understand the procedures and risks involved in flashing a ROM http://wiki.xda-developers.com/index...me=HTC_Artemis
1. In order to flash a ROM on ur HTC P3300 u 1st need to CID Unlock your device, that way u'll be able to flash a ROM on to ur phone REMEMBER to CID Unlock your device before doing anything otherwise u'll brick your phone. You can get the CID Unlocking software frm here http://forum.xda-developers.com/showthread.php?t=311403.
2. After you are done wid the 1st step u've now CID Unlocked your device and it is ready for a ROM upgrade. Select and download a ROM of you choice frm here http://wiki.xda-developers.com/index...mis_DumpedRoms (I personally prefer the Black and Blue ROM http://forum.xda-developers.com/showthread.php?t=364883) flash the ROM on to your device and after the reboot u'll have WM6.1 .
3. Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities. You can find the latest Radio ROMs here http://wiki.xda-developers.com/index..._RadioUpgrades.
But please do read the thread i mentioned in the beginning.
Click to expand...
Click to collapse
thank u for the guidelines
i ran the USPl and I followed the guidelines.
after CID ublocking , it went for ROM Update utility.
i clicked next and processed.
finally i Device get rebooted. but ROM was not get Updated.
still it is in WM6.0
pertaining to point no 2 the rom which is specified by you is it compatible for HTC artemis
I also searched in Artemis _dumped roms.
ididn't understand the Operator . kindly help me about the selection of ROM for my Device.
thanks in advance
When your device boots, what number appears after "SPL" ?
Zecanilis said:
When your device boots, what number appears after "SPL" ?
Click to expand...
Click to collapse
spl-1.11.0000
ok tht shows, tht u have CID Unlocked your phone...and as i mentioned tht u need to select a ROM of ur choice frm the thread i gave u...just click on the thread link in tht page and tht will lead u to the ROM's page, der u'll c screenshots of the ROM and the OS version which wud be either WM6.0 or WM6.1.
Just download the ROM i suggested (Black and Blue v5.0) and download the cube version after downloading it unpack the file and u'll c ROM Uploader/Updater (something like tht) just double-click it and follow the wizard..thts it
yes tht ROM (Black&Blue v5.0) shall be compatible wid ur Atemis
peppercon said:
yes tht ROM (Black&Blue v5.0) shall be compatible wid ur Atemis
Click to expand...
Click to collapse
I installed it too. Ya it is compatible with our Artemis
Fianlly its done..
thank u very much for great support
looking forward the same in future also...
You're welcome!
Hey thx for the posts..
I had a question though - I thought we were talking about Artemis - IOn the screenshots of black & Blue, I saw the processor speed @ 400 MHz - & mine is 200 MHZ ... How much difference will that make ?
win5 to 6.1/6.5?
sir referring to my title..can i upgrade to those higher platform? i have my artemis for almost last year and just know i learn about this..and how can i know is my device is CID locked or SIM locked?
peppercon said:
I would suggest that before u upgrade ur phone read this thread properly to understand the procedures and risks involved in flashing a ROM http://wiki.xda-developers.com/index...me=HTC_Artemis
1. In order to flash a ROM on ur HTC P3300 u 1st need to CID Unlock your device, that way u'll be able to flash a ROM on to ur phone REMEMBER to CID Unlock your device before doing anything otherwise u'll brick your phone. You can get the CID Unlocking software frm here http://forum.xda-developers.com/showthread.php?t=311403.
2. After you are done wid the 1st step u've now CID Unlocked your device and it is ready for a ROM upgrade. Select and download a ROM of you choice frm here http://wiki.xda-developers.com/index...mis_DumpedRoms (I personally prefer the Black and Blue ROM http://forum.xda-developers.com/showthread.php?t=364883) flash the ROM on to your device and after the reboot u'll have WM6.1 .
3. Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities. You can find the latest Radio ROMs here http://wiki.xda-developers.com/index..._RadioUpgrades.
But please do read the thread i mentioned in the beginning.
Click to expand...
Click to collapse
hello,
I CID unlocked my artemis 1 year ago,do i need to do it again ? if i want to upgrade a different ROM? or is ones enough
@leventero
No you dont need to CID unlock your device again if u have done it earlier...just proceed with the ROM flashing
@Neo Collin.
I believe the Black and Blue ROM is compatible with Artemis, since I flashed the ROM once myself and worked perfectly well. Unless you are looking at Black and Blue ROM for another device carrying a higher processor or maybe the screenshots are from some device other than Artemis and posted there for just a reference!! ...please never try flashing a ROM for devices other than Artemis!!...I hope that helps
@lunakrib
Yes you can upgrade you Artemis from WM5.0 to WM6.x, however there are a few things you need to know before flashing. (Prior to flashing your device I strongly suggest that you go through with this thread to understand the complications and other issues that you might face during an upgrade http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis)
1. Before upgrading your device check whether the device is SIM or CID locked or both in some cases. The best way to check whether your phone is SIM locked or not is to insert a different SIM Card (from another operator), if that SIM card works properly means your device is not SIM locked and if the phone doesn't accepts the new SIM Card then probably the phone is SIM locked. Here is how you can SIM unlock your phone http://forum.xda-developers.com/showthread.php?t=397718.
2. Coming to the second issue which is checking if the device is CID locked or not. Well the best way is to take a trip down to your memory lane and see if u have ever flashed a cooked ROM onto your Artemis (since you said that you are using WM5.0 on it, I reckon that your device is probably CID locked) if however you did flash a different ROM then you must have CID unlocked your device. But there is also a way that you can check whether the device is CID unlocked is when you turn on your phone, but it has been a while since I CID unlocked my device so i don't remember that, however here is the link where you can find the CID unlocking software and its procedure. http://forum.xda-developers.com/showthread.php?t=311403.
3. Lastly just follow the steps I listed in my earlier posts in the forum about how to flash a ROM on Artemis. Here is a really nice ROM that you can flash on your Artemis http://forum.xda-developers.com/showthread.php?t=542428...it's a WM6.5
I hope this shall be helpful!! and my apologies for the late reply to all.
peppercon said:
Yes you can upgrade you Artemis from WM5.0 to WM6.x, however there are a few things you need to know before flashing. (Prior to flashing your device I strongly suggest that you go through with this thread to understand the complications and other issues that you might face during an upgrade http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis)
1. Before upgrading your device check whether the device is SIM or CID locked or both in some cases. The best way to check whether your phone is SIM locked or not is to insert a different SIM Card (from another operator), if that SIM card works properly means your device is not SIM locked and if the phone doesn't accepts the new SIM Card then probably the phone is SIM locked. Here is how you can SIM unlock your phone http://forum.xda-developers.com/showthread.php?t=397718.
2. Coming to the second issue which is checking if the device is CID locked or not. Well the best way is to take a trip down to your memory lane and see if u have ever flashed a cooked ROM onto your Artemis (since you said that you are using WM5.0 on it, I reckon that your device is probably CID locked) if however you did flash a different ROM then you must have CID unlocked your device. But there is also a way that you can check whether the device is CID unlocked is when you turn on your phone, but it has been a while since I CID unlocked my device so i don't remember that, however here is the link where you can find the CID unlocking software and its procedure. http://forum.xda-developers.com/showthread.php?t=311403.
3. Lastly just follow the steps I listed in my earlier posts in the forum about how to flash a ROM on Artemis. Here is a really nice ROM that you can flash on your Artemis http://forum.xda-developers.com/showthread.php?t=542428...it's a WM6.5
I hope this shall be helpful!! and my apologies for the late reply to all.
Click to expand...
Click to collapse
hello thanks for notifying us..
my phone is sim unlock im sure of that i have used it with many SIM but security unlock im not sure,,on #2 that USPL by pof, do we need to run tru uspl everytime we're going to flash a new cooked rom? or once u flashed the update SPL no need to flash it again
thank you

Rom upgrade for HD2 from o2 (UK) - won't let me!!!

Hi guys, anyone know the way to overcome this?
How to upgrade to a higher ROM?
Even HTC's website won't let me downloading the ROM saying that the upgrade aren't for this device!!!
Please!
p.s. sorry I'm new to winmo...
regards!
use a gold card in sd slot or just install HSPL first
wtf is a gold card? i keep seeing people refer to it but never what it is, i imagine its a sim card with a toffee penny wrapper stuck to it lol
http://forum.xda-developers.com/showthread.php?t=591314
Basicly its a sd card with its unique serial number run though some software but as its no longer free just use hspl if you dont have a goldcard.
Forget about the goldcard, you don't need one so long as you have a copy of the original rom available, which you do. Hunt it out in the official roms forum. First post, first link, 1.43 section, its listed there. Thats your backup, then instal hspl and you can flash what you like.
Your HD2 is locked to o2 (UK) ROMs only so you cant put any of the official HTC ROMs or any of the custom ROMs from the "HD2 ROM Delvelopment" forum
http://forum.xda-developers.com/forumdisplay.php?f=534
because of this your always be running out of date software as the phone operators are always so slow at releasing updates if they do at all.
BUT if you download HSPL from the above forum thread "[HSPL] HowTo flash everything"
http://forum.xda-developers.com/showthread.php?t=611433
and install it to your phone your then be able to put on any ROM you like. Don't worry its near impossible to muck anything up and you can always put the phone back to its original rom, just do a little reading if your still not sure.
Great Guys! HSPL helped!!! I've upgraded...shame I can't manage to download Rom 1.66 as it always crashes and the download in general is sooo slow (not the internet issue)...but maybe with a bit of patience I'll get it at the end!
Cheers once again!!!
essensial said:
Hi guys, anyone know the way to overcome this?
How to upgrade to a higher ROM?
Even HTC's website won't let me downloading the ROM saying that the upgrade aren't for this device!!!
Please!
p.s. sorry I'm new to winmo...
regards!
Click to expand...
Click to collapse
HTC have now listed a new ROM upgrade (1.72.206.3 released 27/04/10) for the HD2 on their UK support website (htc.com/uk)
Let me know how you get on with it as when I enter my o2 serial number I still get the error message you mentioned. I have sent a message to HTC support...just waiting for a reply.
shutty2k3 said:
HTC have now listed a new ROM upgrade (1.72.206.3 released 27/04/10) for the HD2 on their UK support website (htc.com/uk)
Let me know how you get on with it as when I enter my o2 serial number I still get the error message you mentioned. I have sent a message to HTC support...just waiting for a reply.
Click to expand...
Click to collapse
all you o2 guys that cant down load have been able to get 1.66 from htc's site for months now this rom is purley for the forgoton few (like me) who got the phone as o2 launched and locked down (no wifi router etc) I ran this rom for a day and it nice and snappy fast but its still not wm 6.5.3 so i am back on touch-x again now the 2.07 radio in the o2 rom was quite ok in my area when I used it a few months ago but the 2.10 in my opionion is a match for recption with better battery life just my 2 cents hope it may help some of you
What about Virgin Mobile? Will they get a Rom Upgrqade???? they seems to have been left out of the loop even though they were the first (technically second) carrier of the phone.

Categories

Resources