Hi,
yesterday i've installed S2U2 on my XDA Niki... it works quite well, but only if my XDA is connected to my PC... if it is not connected, S2U2 locks the keys and everything else after wake up, and I can still unlock them by sliding over the touchscreen, but there is no animation of the Button... also the clock doesn't update well... only if I wake up my device a second time...
It is also impossible to scroll, enable or disbale the settings of S2U2 when my XDA is not connected to my PC...
I tried to put the Reg-Key "DirectDraw" to 0 or 1, but it didn't changed a thing...
Is there Anybody who has the same problem or somebody who knows a answer???
same problem
Anyone got to the bottom of it?
Related
Help! I downloaded Phonealarm from the net onto my xda mini s. after it installed on my xda it said to do a soft reset. now the screen stays off while the phone is on. i can recieve calls as normal but i cant use my phone in any other way as i cant see!
any help greatly appreciated
dug
I've used Phone alarm for a while and didn't had that problem. Are you sure it is not your backlight? I've fooled myself once or twice by turning the backlight off by accident, the hardware button that is. Press and holding the power button turns off and on your backlight while the display is still working. If otherwise then disregard this silly remark.
So its the screen totally switched off or the backlight? What happens if you sof-reset? if suppose you could see the splash screen, then it maybe like some software is causing the issue. Try connecting to active sync & remove any unwanted program from startup folder or you can even un-instsall from active sync.
On my Mobile Shell Now Screen, it suddenly says "unlock" & i am required to unlock the phone everytime. I didn't set this up, it must have been done on accident. Any ideas how to turn it off so i can just start using the phone by hitting the power button again? I've looked through all the settings I can think of & can't figure this out. Help please!
any light on this? This JUST occured on my 6800. I have S2U and did not fool with settings. Just happened today.
Reinstalled S2U, Removed S2U (deleted folders and reg keys as well).....still happens
******************UPDATE*********************
Found the error. I have Battery Status on my front screen, for some reason it glitched and there is a setting withing the settings of battery status that "locks" upon wakeup with device lock not s2u. Problem solved
Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?
Doesn't pressing the "End call" button for 2-3 seconds also lock the phone?
Regards!
I do understand what you're saying. I figured out something really basic just the other day, that is if your phone is locked or in sleep mode just pull out your stylus and it'll unlock and wake up.
Just 1 movement.
Sorry if this is really common knowledge and you already know this but sometimes we overlook the more basic functions on such a complex device!!
Cheers
DB
Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.
jon- said:
Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.
Click to expand...
Click to collapse
Yep i do this too.
Press the power button mate, and it will lock the phone
I like how the phone unlocks when you take the stylus out but i didnt like how it locks the phone when you put the stylus back in, so i removed that function using the options in gyrator
I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.
is there a registry option for disabling the unlock when the stylus is removed/falls out ????
matou25 said:
I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.
Click to expand...
Click to collapse
why my HD no "Phone Canvas"?
Jezwick said:
is there a registry option for disabling the unlock when the stylus is removed/falls out ????
Click to expand...
Click to collapse
I searched a long time for this, but I didn´t find a solution
Standby locking
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.
surfaczer said:
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.
Click to expand...
Click to collapse
Have you tried HDTweak?
ScarySquirrel said:
Have you tried HDTweak?
Click to expand...
Click to collapse
Please explain
device lock
gt112 said:
Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?
Click to expand...
Click to collapse
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon
JPW said:
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon
Click to expand...
Click to collapse
You're Irish too, I presume?
The other option is you attached a very small cab.
OOOPS forgot cab
have edited post now
Jon
Should the device lock when I put the stylus in? I get the impression from this thread that it should but mine doesn't?
So, I have PocketShield installed and it's set to slide or light unlock and answer. Quite often when I get a call it takes so long to unlock and answer, the person is gone...
There are maybe a few options -
1) I've installed and uninstalled so much stuff, maybe I need to start fresh? I have noticed the HD is a little 'laggy' now. Should I hard reset and install things back on slowely, testing it's responsiveness as I go?
2) Maybe I should switch to S2U2? I used this for a long time on my Kaiser, but have been concerned by everyone saying it drains battery power.
3) Do I need a screen lock program? The device only wakes up on a phone call and now you have a slide to answer/ignore anyway. Do the hardware keys do anything at this point? Am I safe to carry it round in my case without a screen lock?
Does anyone else suffer from this, or just me?
Thanks for any help/advice in advance.
Having the same issue. Sometimes my slide option simply doesn't work first few attempts. My solution is to use the "answer call" key beneath the main screen until this gets resolved.
S2U2 works like a charm on the HD and it doesn't draw additional battery as far as I have seen over the past few days.
When u have a call, u don't need to slide so you unlock the device then accept/reject the call.
Depends on what you have set, you can either have the original accepting/rejecting HTC screen poping up to take/reject your calls,
or you can set it so u have a new slider appearing on the wallpaper of S2U2 to accept/reject the calls
Try it, you won't regret it guys.
Well, yesterday I hard reset my HD and installed just the stuff I wanted. I've gone back to S2U2 and everything seems much much better so far. The only annoying thing is sometimes the phone wakes in landscape mode still, even though it's set to not rotate in Gyrator (and doesn't when it's woken, it stays in whatever it is in.)
Whats the difference between S2U2 and the phones default slide to answer phone ?
In other words, why install S2U2?
Its a very well presented Screen Lock, that's why. The question is just how to go from that to answering a call...
Id I have S2U2 installed, and a call comes in on my HD, what happens? does s2u2 take over from the default "slide to answer" system?
Yes it does. I think the problem I had was it wasn't doing that properly before hand. They were obviously conflicting with each other and I was struggling to answer calls.
gt112 said:
Whats the difference between S2U2 and the phones default slide to answer phone ?
In other words, why install S2U2?
Click to expand...
Click to collapse
Well S2U2 will lock your phone screen and buttons so you do not start by mistake an application or a phone call when the device is in your pocket.
Even if by mistake u click on the power on button, ur device is still locked until u unlock it using a slider like on the i-phone.
It allows u to display a wallpaper of your choice, different then the one on your today screen or in TF3D. It allows u to display clock date, network signal, tasks, missed calls, SMS, etc ...
Try it, it's free and very nicely designed
I tried to use S2U2 and found that just like every other locker it is behaving wrongly after a call - it leaves the device unlocked! So if I listen to music and get a phone call I'll have to pull it out of the pocket to lock again. There is a silly option to lock after each call of course, but this is just stupid - I just want the device to stay locked until I unlock it - how difficult is this?
Funnily, the only locker behaving properly is the stock Windows one, but it has a backlight bug and switches the device to Home screen.
It's just amazing how nobody can do such a basic function right.
vangrieg said:
I tried to use S2U2 and found that just like every other locker it is behaving wrongly after a call - it leaves the device unlocked! So if I listen to music and get a phone call I'll have to pull it out of the pocket to lock again. There is a silly option to lock after each call of course, but this is just stupid - I just want the device to stay locked until I unlock it - how difficult is this?
Funnily, the only locker behaving properly is the stock Windows one, but it has a backlight bug and switches the device to Home screen.
It's just amazing how nobody can do such a basic function right.
Click to expand...
Click to collapse
Just tried it few seconds before posting, called myself from the office phone, answered the call using the slider is S2U2, the screen turned off, I ended the call by pressing on the end call button on my HTC touch HD, and the S2U2 screen lock was there, the device was still locked.
It works perfectly with the touch HD.
Hello,
I've been using Touch HD at least 7 months. When i first bought i never get this issue but lately my phone wakes up when in sleep mode even i dont press power on/off button.
First i thought it's the software problem so restore my stock rom( 1.14 German) but no luck same problem happened. i tried many cooked/original rom again no luck.
So it must be hardware problem, then begin when it happens this wake up issue. Generally after sleep mode actives 2-3 seconds later it wakes up.
and i realized that it wakes up when the stylus is in. When phone is in sleep mode and stylus is in if you press the case where the stylus is, it wakes up,
(not all the time) but when stylus is out nothing happens .
anyone has the same problem, at least have a solution for this.
Can we disable when the stylus is out the phone is wakes up setting?
I'm using s2u2 program to unlock phone, so it doesn't call anybody at my contact list by mistake...
Hey LostXP,
I've got similar problems while using S2U2 - it never happened before. I think this must be a Software-Problem generated by S2U2... anybody out there having the same probs.
My HD wakes up while beeing asleep, trying to create voice-orders or initiating video-calls...
Find the mistake... I used the standard Headset which tried initialise calls because of pressing the call-button without recognizing it!
Broetchen said:
Hey LostXP,
I've got similar problems while using S2U2 - it never happened before. I think this must be a Software-Problem generated by S2U2... anybody out there having the same probs.
My HD wakes up while beeing asleep, trying to create voice-orders or initiating video-calls...
Click to expand...
Click to collapse
Problem not the s2u2, s2u2 solves the problem temporarily
up!!!
anyone???