On my Mobile Shell Now Screen, it suddenly says "unlock" & i am required to unlock the phone everytime. I didn't set this up, it must have been done on accident. Any ideas how to turn it off so i can just start using the phone by hitting the power button again? I've looked through all the settings I can think of & can't figure this out. Help please!
any light on this? This JUST occured on my 6800. I have S2U and did not fool with settings. Just happened today.
Reinstalled S2U, Removed S2U (deleted folders and reg keys as well).....still happens
******************UPDATE*********************
Found the error. I have Battery Status on my front screen, for some reason it glitched and there is a setting withing the settings of battery status that "locks" upon wakeup with device lock not s2u. Problem solved
Related
I no longer have my password screen on my MDA Vario. It used to be there but now it's gone and nothing happens when you click on password in the settings menu. I'm not sure when it went but I've got loaded spbackup, tomtom5 and smartkey/Omap overclock. It's also unlocked (just the Sim lock).
I recently had problems with the alarm. I couldn't stop it going off after setting the daily alarm and the flashing yellow light wouldn't cancel. Eventually I cleared it by disabling smartkey and at the same time I clocked it back to 180mhz. Then I managed to cancel it by pressing the bottom left softkey. I then ran the Check Notification software to clear all the notifications that had mounted up. Since then the flashing light problem has cleared and I'm not using the alarm again!
Anyone got any bright ideas how I can get my password protection back?
Many thanks
John
I have a weird problem with one of my two Cingular/AT&T 8525 phones. It appeared before I upgraded to WM6, went away after upgrading, and came back again a few days ago.
It seems that all the buttons are live and touching any button wakes the phone (turns it on). The phone turns on even when I connect it to the charger. Is it due to some Registry corruption or random changing of a setting? The other phone never displayed this behavior.
Any help will be appreciated.
maybe its some software u installed.. try unistalling one by one everything and see which one it is... if not then idk.. lol
good luck man! =]
In the system tab of settings, check out your Keylock.. Should be at " lock all buttons except power button".
SH4YD33 said:
In the system tab of settings, check out your Keylock.. Should be at " lock all buttons except power button".
Click to expand...
Click to collapse
Thanks a lot SH4YD33! I have no idea how the setting changed to "Do not lock buttons". Perhaps my wife placed the phone in the pocket of her handbag without switching it off and the buttons created this change. Seems that the phone strives to be alive...
ARGH! Any way to disable the Start Menu's "Lock" button or make it not appear?
I had an interesting problem that basically results in all data loss if it happens. On a particular Blue Angel I was working on, the touch screen somehow lost its calibration. In attempting to get to the calibration menu, the wonky screen somehow hit "Lock" on the bottom left corner of the Start Menu, and the device locked. Since the touchscreen became uncalibrated there was NO WAY for me to touch the tiny area and slide it properly. Thus I could not unlock the device even though LOCK is something that I NEVER EVER USE. I had to hard reset and lost all data. In WM2003, this would never have been a problem! I imagine if someone does use device lock, a screen decalibration incident would result in all data loss too which is unacceptable!
I tried the classic style lock screen which requires less precision but it still involves the need to touch a specific screen area in order to unlock it.
Is there any way to get rid of the Lock option in the Start Menu competely? A registry key perhaps? I want NOTHING to do with the device lock feature, it just seems to cause more problems and data loss than anything else. Any suggestions?
I believe that I have seen a post or two regarding the soft keys for the Start Menu. I'll see if I can find them.
On a side note, please refrain from opening new threads with questions. There is a Q&A thread at the top of this section for this kind of inquiries. I will transfer your question over there. Thanks.
anybody figure this out? i really would like to know
Lock sucks. If you have the phone locked, and get an incoming call - it doesn't unlock automatically, and there is no way to unlock it on the 'answer phone' screen.
So - you cannot get an incoming call if you use lock.
i dont even use it. i use pocketshield but i dont want the lock button to turn on PS, i want it either gone or to have it set up as a "back" button.
Has anybody managed to get rid of that damn button ? I have been looking around the forum for ages and still can't find a way to get rid of it.
very strange, i have just noticed that my phone lock screen is now gone.
when i hit the hang up/power off button instead of locking the screen it goes black but when i hit another button it comes right back to the main today screen but no lock screen. bit of a problem when it does in the pocket.
any help??
hi
start - settings - menu -all settings - lock -(untick prompt if phone unused for) ----follow instructions -- reboot
regards
op
hold down your power button and lock the screen using that, then when you put the phone back into sleep it will wake up locked.
You may have to do this everytime after a reboot. Eventually mine sorted itself out and I no longer have to do it
This happened to me after I installed the HTC SMS patch. It also makes it so you can only preview your emails and not go into it by selecting. Installed and hard reset twice thinking it was a fluke. Nope.
i got the lock screen back by going to Settings / Change background of lock screen, then softreset. don't know why it went missing and why i got it back doing this... but it worked.
Hi All, I needs some help!
I have a Vodafone HTC Magic, all working fine until this morning when it has decided that it does not want to lock the screen.
I have it all set to require a pattern to unlock but this morning I have come to use it and noticed it didn't ask for the pattern.
I checked the settings and they were not set to require a pattern, no idea what changed it? Anyway I set them again but despite this everytime I lock the phone now (basically just by pressing the end call button) any button will bring it back to life and it is not asking for the pattern so everytime it's in my pocket and a button gets pressed the phone comes on!
I haven't installed any new apps and have tried turning it off and taking out the battery but the screen locking just wont work.
EDIT: Also noticed that the home button doesn't do anything now either!
Any ideas?
Thanks
Replying to myself but thought I'd let anyone who was interested know that I sorted it. Not altogether happy though because it required a full factory reset!
Is my phone running Android or Windows??????