Related
upgraded to the 4.00.10, and have been unable to connect since.
Settings are:
Cellular Line (GPRS)
internet2.voicestream.com
Blank on all authentication info.
Recieve a "The answering modem has disconnected. To check your modem settings......." message with the topion to dismiss. I know I must be missing something, the default settings should work. I am in Northwest Florida in an area covered by the GPRS internet, although Powertel is shown as my local GSM provider.
I've had it working before, on the stock Tmobile ROM, then the upgrade off the site, but since the PPC2003 upgrade its been no dice.
Any ideas? TMobile is stumped, along with the other guys at my Circuit City (we retail T-M there, and the rep and I are both on the new test ROM on our PPC's). His however, works.
Try a soft reset first and if that fails, changing your AP to internet3.voicestream.com or wap.voicestream.com and see if that helps.
HTH
I can connect when I tried wap.voicestream.com, however, I am unable to load any pages or connect to anything. Much like a PC which cannot get any DNS resolution.
Well thats a step in the right direction at least, how about emaill and MSN Messenger! Are they working? Also try running welcome.exe thats located in your windows root folder.
HTH
Same Here
If I connect VIA the T-Mobile VPN I get "answering modem has disconnected".
And if I connect Via T-Mobile Internet it connects but I cant go anywhere, either via web or IM.
Incidentally to get in to manage the connections, when you click on settings it doesnt automatically give you the option to change existing settings, you need to go into add new and cancel and then the option to manage existing connections appears.....weird...
Anyway, anyone any suggestions.
Also running SBP's GPRS Monitor V. 2 Build 224
No ability to connect to anything, HTTP, or AIM type service when on WAP. internet2 and internet3 don't answer at all.
If any US T-Mobile customer is running the 4.00.10 software and is able to connect to GPRS, please list all settings used to connect, in the connection settings, GPRS authorization type, etc; just list as many settings as possible.
I had someone in my CC the other day who told me about the 4.00.10 ROM being available here, and he was on GPRS. If I see him again, I will make sure to clone his settings, or backup his ROM.
Sounds like its about time to try a hard reset also whats you radio stack version?
HTHH
Im using the included 6.24.00 update radio stack. Just completed hard reset on device, still no go. I'll try getting in touch with T-Mobile, I'll just have to neglect mentioning the ROM version Im running. Doesn't seem to be too many differences in the setup of the connections, just in getting them to work :evil:
OK, now whats the status on your radio light does it come on at all?
Also what radio version were you running before the upgrade?
If it was the sock T-Mobile version I'd try installing the newer AT&T stack.
Anyhow if you would like to give that a try drop me an email at [email protected] and I'll forward you the needed four files. As a matter of fact I just downgraded back to the AT&T stack myself just to see if there were going to be any problems and the downgrade went without a hitch.
HTH
Hmmm....
Mine has started working now!
I did uninstall the SPB GPRS Monitor, not sure if that has anything to do with it!?! Need to play with re-installing it I guess.
I turned off AUTO PICK for the GPRS connection and forced it to use internet2.voicestream.com
Yay!
Ok, crap, after further playing it is back to how it was previously...i.e. not working again!
Are there any network problems right now?
emailed.
No luck from TMobile, all looks ok.
Applied the AT&T radio stack with the following results:
Still no luck, same error message, all other functions seem to work the same as before woth the test radio stack.
Miss Bunny said:
Hmmm....
Mine has started working now!
I did uninstall the SPB GPRS Monitor, not sure if that has anything to do with it!?! Need to play with re-installing it I guess.
I turned off AUTO PICK for the GPRS connection and forced it to use internet2.voicestream.com
Yay!
Ok, crap, after further playing it is back to how it was previously...i.e. not working again!
Are there any network problems right now?
Click to expand...
Click to collapse
I too am having the same results.... that is intermittent signal under GPRS. I have actually logged into MSMessenger using the internet2.voicestream.com w/o authentication
...but the whole thing sucks. I am in Atlanta... where are others :?:
Perhaps it is engineering at the Mobile Receiving end :?: Is that posible?
Is there a RSU that is working well under 4.00.10?
Still nothing here. All I can hope is that the TMobile Rep gets to Circuit City soon, and perhaps I can get some help from him (he has PPC2003 on his MDA)
internet3.voicestream.com works every time. I never could get internet2 to work even on the 3.4 original ROM here or in the U.S.
Later..............
I had a lot of trouble too. I went to GPRS Authentication Icon and set to PAP authentication. Now I can connect and actually get it to function for short periods of time. I suspect some problem with Tmobile is causing the intermittent connection loss. The device stays connected but connectivity dispappears. I tried ping tests and they start with semi-acceptable rates then fade away. If it doesn't get better, then I am taking the internet service off of the unit.
I cant believe Im about to say this
As much as I have liked Powertel/ VoiceStream / T-mobile..
They are starting to SUCK.
Customer service
Call connectivity
GPRS
I have had problems maintainging a GPRS connection.
I found that turning the radio on and off revived the connection somtimes.
Other times a soft reset was needed.
To anyone that has a problem Id recommend this...
Call T-mobile talk to WDG about your connectivity problem
next
Go to a retail store or aquire another GPRS phone and test connectivity with it.
Neither of the above solve the problem
It IS a T-MOBILE issue
complain complain complain.
Im not sure if they are saturated or what.
But..
I see no escuse for their problems.
I have had GPRS since day one and it has been flaky since day one.
period.
This is consistent EVERYWHERE I travel to in the US.
Note: I also have voice problems.
Im on my 5 XDA replacement. I havent tried 2003 as its not past Beta and I have enough problems with 2002 to not introduce something that is worse.
Does anyone know when 2003 will be released?
Geez
</soapbox>
BeDammit
Since rebooting my O2 XDA Exec into Corporate mode, I seem to have no GPRS nor 3G setup as neither will connect to send MMS messages - any ideas?
Dude, corporate mode does not install any of your gprs and mms settings.
If you installed this mode to get rid of the dreadful o2 interface, you would be better installing basic mode.
This gets rid of the o2 rubbish but installs your gprs and mms settings.
Fatzzz
If your interested i have made a cab file with just the O2 connections settings app in it. None of the other Active stuff is there. I did try to upload it to tekguru but had problems so i have it on one of my websites here.
http://caravan-smart.co.uk/xda-exec.asp
Ahhhhh nice one dude, very helpful - just got to hope my area has 3G coverage now!!
Nice one - so after a hard reset you install corporate mode from the extended rom, then install your cab in personal and all will be set up? Does that include MMS as well as I had real troubles getting Pocket Outlook to see MMS account once in corporate mode and soft reset.
Will try it and see how it goes!
Nice one dude,
Fin
NO MATE, I think you'll find its BASIC mode as the chap says - Personal will shove all the O2 crap on there, whereas BASIC just puts the GPRS and 3G settings on - just done it and it works fine!!
HOWEVER when I try to start a 3G video call, it states "The 3G network is not available....", I don't quite get this 3G, do I have one connection that is either GPRS or 3G depending on signal, or are there two connections here, if so, how do I use each?
Anyone on O2 managed to get O2 Video Calling to work to another Exec?
Thanks mate!
No, I was referring to Dingo's cab, when you hard reset you select corporate mode with the code 0506 then run his cab, then as he says on his site, click Personal this time as his cab just contains the Connection settings. Just done it and all seems to be working well - thanks Dingo!!
Thanks for the CAB file, Dingo. Will try it out at the next hard reset.
Not sure if its me, but Hotmail from Pocket MSN seems to be playing up now - can anyone else report the same thing? It keeps freezing when I click on it and Pocket Outlook doesn't see the account.
Fin
Yep I have tried the O2 Exec to Exec video dialling. It was nice to try, but wasn't that great. And I think its now 50p per minute, so won't be doing it again in a hurry. :shock:
Cheers
Nasdaq
No apparently until March its charged at the same price as Voice Calls, also can be part of inclusive minutes for voice calls - after that time it'll be 50p as you say.
My mistake, was told differently by a friend. Still won't use it though, sound was delayed and not very clear. :roll:
Cheers
Nasdaq
Glad you find it of use.
The way i do it if i hard reset is after setting up the screen and the O2 stuff is about to install when you get the 3 second countdown i soft reset. This will give you a vanilla install of WM5 on your Universal and none of the Ext ROM will be installed.
This way though you do not get any of the pathces and fixes etc so i selectivly install them from the XDA Exec Ext ROM posted on the xda-dev ftp site
I then install the settings cab i made to enter my O2 Connection settings.
For the most part as described by others above you will probably be best to use corp mode for your initial setup. Then just choose pesonel when you run the CAB i made.
As far as i am aware you can still use this without a hard reset as it only installs the connections app. I have tested on mine and it was ok but would be interested if it works for others.
ashleyhall said:
NO MATE, I think you'll find its BASIC mode as the chap says - Personal will shove all the O2 crap on there, whereas BASIC just puts the GPRS and 3G settings on - just done it and it works fine!!
HOWEVER when I try to start a 3G video call, it states "The 3G network is not available....", I don't quite get this 3G, do I have one connection that is either GPRS or 3G depending on signal, or are there two connections here, if so, how do I use each?
Anyone on O2 managed to get O2 Video Calling to work to another Exec?
Thanks mate!
Click to expand...
Click to collapse
3G coverage is still a bit thin with O2. If you look at the icon next to your phone signal strength it should read either G or U. If it is G then you are on their NON 3G network, if it displays U then you are on thei 3G network.
I am in a week 3G area at home and mine swaps between the 2 every few minutes.
Ahhhhh interesting...wonder why they chose 'U' for 3G..doesn't quite compute!
Looking forward to playing with 3G at some stage in the future then!
ashleyhall said:
Ahhhhh interesting...wonder why they chose 'U' for 3G..doesn't quite compute!
Click to expand...
Click to collapse
'U' stands for UTMS, which is the system that we call 3G (or 3rd Generation). The 'G' stands for GSM, which is the 2nd generation networks we've all enjoyed using for the last 15 years.
ashleyhall said:
Looking forward to playing with 3G at some stage in the future then!
Click to expand...
Click to collapse
I thought it might be fun too, but the truth is that I know hardly anybody with a video phone, and considering how unreliable the 3G coverage is around where I live (Sussex) it's unlikely to be much use anyway. The whole 3G premise is based on a gimmick IMHO rather than a genuine consumer need. Sure, the data rates are faster and in time this will be a good driver for the technology, but then they charge us a fcuking fortune to use it, so only a handful of people bother. Madness.
Video calling works across networks. I have found many of my relatives have 3 3G mobile phones and are able to receive video calls from me (as on Vodafone video calls are free for a short period and on O2 the rate is the same as voice calls). O2 and Vodafone UMTS download speeds are good (coverage in London is resonable and in Berkshire).
not working
have tried this - I cant connect at all - after hard reseting in corporate then running this cab and setting to personal - it tries to dial mobile web but says it cant connect for an unknown reason - any ideas
Vanilla
works ok on vanilla install - it seems since this thread was started ON hav changed some thing but this cab has no problems after vanilla installl only after corporate - I am gonna run the bug fixing cabs etc in the ext rom manually !!!
My GPRS still aint configured correctly - it connects fine but I get no internet access, its as if the proxy is configured wrong?
Is there a cab that puts the correct 3G and GPRS settings onto my phone without any user configuration required? (and without mucking up my system).
I need help setting up my unlock HD2 for AT&T use.
I cannot access web and get MMS because all my settings are for T-mobile (default). Where can i get the settings for it or .cab file to cahnge it over to work with AT&T?
Is anyone in the same boat as me?
Previous phone = Iphone 3GS
bought HTC HD2
Unlocked it (Remote code)
inserted official AT&T 3G sim card
phone is working but without data connection/MMS
Here is what you need. Just apply the cab and reboot.
Hope it helps, worked perfectly for me.
Never mind my sig. I need to update it.
Sweet Lowdown said:
Here is what you need. Just apply the cab and reboot.
Hope it helps, worked perfectly for me.
Never mind my sig. I need to update it.
Click to expand...
Click to collapse
THanks.
How do i install it?
Sorry, kinda new with WinMO
Thank you SOOOO much for that Cab file. I love my phone even more now
Ace00 said:
THanks.
How do i install it?
Sorry, kinda new with WinMO
Click to expand...
Click to collapse
if someone could give a bit of help with this that would be incredible. I haven't been able to get it to work either.
thank you
if you plan on switching roms, the newer ones usually have the function built in to configure them according to what carrier you are on. I found that either Kumar's or NRG's roms work pretty well as I'm currently using Kumar's Lite WWE rom
deecalynn said:
if someone could give a bit of help with this that would be incredible. I haven't been able to get it to work either.
thank you
Click to expand...
Click to collapse
Copy the cab file to your phone and then use file explorer to go to it and double click on it and run. I will agree with the post above, 99% of custom roms come with a connection setup that lets you choose ATT and it downloads the settings for you. Plus helps out the OS lol
I got the file installed but still no luck, any other ideas??
Media Net
I have installed the media net but it still doesn't work.
I did the same thing and the people at at&t told me that it want allow you to have data connetion through them. They were wrong. Call 1-866-449-8358, they will hook you up with the settings. You want have to download anything. Once you have a data connection it will show that you are connected to edge. But, it is 3g.
I got this figured out. go to settings/Wireless Control/Data Connection/Advance(tab on the bottom)/Selectnetworks/ and then change the both drop down bars to Media Net.
Don't forget to turn the Data Connection "on" in the wireless controls.
It worked just fine on my HD2
I used the cab file on the first page, installed and restarted. Mobile internet works fine, but I still can't receive MMS. The pics are the right size so I am lost as to where to go next. Any help would be greatly appreciated, thanx.
gdgtfrk said:
I used the cab file on the first page, installed and restarted. Mobile internet works fine, but I still can't receive MMS. The pics are the right size so I am lost as to where to go next. Any help would be greatly appreciated, thanx.
Click to expand...
Click to collapse
Can you make sure these are the settings in your mms server info
Name AT&T MMS
Server Name....AT&T MMS
Ip Address....wireless.cingular.com
Port number...80
Server Address....http://mmsc.cingular.com
Connect Via....Media Net
Message Size limit....600 (this is the max ATT will allow)
Wap Version....Wap 2.0
Thanks guys for all your help. Got it figured out. The problem was that I couldn't find where the heck to get to mms settings in the first place. Taken care of.
fredg4000 said:
I did the same thing and the people at at&t told me that it want allow you to have data connetion through them. They were wrong. Call 1-866-449-8358, they will hook you up with the settings. You want have to download anything. Once you have a data connection it will show that you are connected to edge. But, it is 3g.
Click to expand...
Click to collapse
How can you be sure that HD2 will run on ATT 3g? alot of people are saying it probably won't have 3g, but you get an EDGE network... i really need to know this because i might switch to att from tmobile.
I am in between iPhone's (3GS-iPhone 4), but I have an HTC HD2 T-Mobile USA version as a secondary phone. I returned my 3GS (which I just recently upgraded to after losing my 3G iPhone) so I could be eligible for the upgrade price on the iPhone 4 and I only have the HD2 right now (love the phone by the way). Anyway....
Quick question: I tried applying MEdia Net/MMS Settings both manually and with the cab file, but I cannot seem to get data working on my HD2. My AT&T account is not on Media Net it is on the iPhone data plan, so could that be the reason why I cannot get data to work on my HD2?
I tried figuring out the problem on my own but I'm obviously not getting it done...thx for the help.
p.s. The HD2 is running on stock software. I have not applied any roms or hacks to it.
OS: 5.2.21892
ROM: 2.13.531.1 (90963) WWE
Sense: 2.5.20121412
The same...
j-dub562 said:
I am in between iPhone's (3GS-iPhone 4), but I have an HTC HD2 T-Mobile USA version as a secondary phone. I returned my 3GS (which I just recently upgraded to after losing my 3G iPhone) so I could be eligible for the upgrade price on the iPhone 4 and I only have the HD2 right now (love the phone by the way). Anyway....
Quick question: I tried applying MEdia Net/MMS Settings both manually and with the cab file, but I cannot seem to get data working on my HD2. My AT&T account is not on Media Net it is on the iPhone data plan, so could that be the reason why I cannot get data to work on my HD2?
I tried figuring out the problem on my own but I'm obviously not getting it done...thx for the help.
p.s. The HD2 is running on stock software. I have not applied any roms or hacks to it.
OS: 5.2.21892
ROM: 2.13.531.1 (90963) WWE
Sense: 2.5.20121412
Click to expand...
Click to collapse
Funny, I'm in the same situation! I sold my iPhone yesterday in prep for the iPhone 4 and got the HTC HD2 from T-Mobile to use for a couple of weeks (also got it unlocked by them the next day!).
After installing the .cab file, reboot your phone then go and change your data settings in the HD2. I'm on the iPhone data plan with AT&T as well and everything thing seems to be working fine.
JC_Agga said:
How can you be sure that HD2 will run on ATT 3g? alot of people are saying it probably won't have 3g, but you get an EDGE network... i really need to know this because i might switch to att from tmobile.
Click to expand...
Click to collapse
The T-Mobile HD2 will not work on AT&T's 3G bands, period...only edge. You'll have to get the Australian (Telstra) model to be able to use AT&T 3G.
Choosing baseband
Interesting because in Phone Settings there is the option of choosing your baseband between AT&T's or T-Mobile's or to put it on Auto. I just chose Auto to be safe as I'm using an AT&T sim.
On hold with HTC Support so I'll shortly know definitely.
Thanks
Sweet Lowdown's Avatar
Sweet Lowdown
It worked perfectly.. I will now keep the phone. If I couldn't get it to work I was going to sell the phone. But now I am glad I kept it.. Thanks again..
Hello,
I am a Iolite user, however my brother just bought a Magic.
It runs Android 1.5, everything is as it came and it was sold by VODAFONE from Portugal.
Obviously when we turned the phone on it immediately connect to the internet thus spending 1€ since he has no data plan - everyday it would spend 1€!
I have tried to disable HSDPA and even edit the APN but everything just goes back to default - we have tried a program to disable 3G but it kept using HSDPA.
He called Vodafone and they disabled text messages, phonecalls and MMS which is just an unnaceptable state for a phone.
Should anyone have a suggestion please DO reply he+s getting desperate! (I am only accustomed to windows mobile)
hmm im guessing the app you tried was apndroid?
if not give that app a try
Hello, So I just got my new HD2 unlocked and on ATT and for some reason I can surf the internet, send/recieve sms but can not send/recieve MMS. I have tried the various patches, triple checked all MMS Server Settings (wireless cingular com and http mmsc cingular com ) and am still not getting anywhere.
I just called ATT today to get my IMEI number updated and that still hasnt helped. I am running Touch X-Treme 2 2.0.00.01, Rom Version 2.13.531.1 (90963) WWE, Radio Version 2.10.50.28_2 and I just had Rom Version 2.11.50.29 (i think) earlier today with no change.....
Any Info would be great, I've looked all over the forums with no success, I'm in the Portland Oregon area and picture messages would be nice
-James
I have never had good luck with ANY of the custom roms on either ATT or tmobile getting and sending MMS. I'd suggest flash back to stock ROM and then try it with the correct settings. I ended up doing that and its worked flawlessly. I just had to manually customise my ROM.
I am running a custom rom and have never had an issue with sending or receiving MMS once I am done flashing this rom and testing Ill upload all the settings. I am also running on ATT
here is my settings right from my reg
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\MMSCSetting\SampleMMSC]
"ConnectionVia"="{B2AD7D1D-2C4B-494B-B324-42EEC882B71B}"
"Gateway"="wireless.cingular.com"
"GatewayPort"=dword:00000050
"ISP"="SampleMMSC"
"MmscURI"="http://mmsc.cingular.com"
"Name"="AT&T MMS"
"SendDefault"=dword:0004b000
"WAP1SendDefaultSize"=dword:0004b000
"WAP2SendDefaultSize"=dword:0004b000
"waptype"=dword:00000001
Hey, Thanks you guys for your help, I think I can do a flash within a couple hours, will PIMBackup save MMS messages that I have not 'downloaded'? And should I go back to the TMobile ROM or the HTC?
One other little thing, Should 3G/HSDPA be working with this phone on ATT's network?
THANKS SO MUCH!!
-James
Soooo.... I just recieved a picture with Energy Rom.... soooo.....hmmm.... the only thing i dont like about energy is the menu bar at the bottom....looks like crap....so hopefully Touch X-Treme can use some tweaking to get it working.
Thanks for the help guys! Oh, and so there is no way to get ATT 3G working with this phone?
corollagtssrx said:
Thanks for the help guys! Oh, and so there is no way to get ATT 3G working with this phone?
Click to expand...
Click to collapse
Correct, AT&T uses 3G bands that the Tmo hardware isn't able to handle (and vice-versa). You can still use their EDGE data though.
Yeah, MMS still isnt working with Touch X-Treme....