Database Users

Problems after Start HimaClearJumpCode.exe

Hello,
i do something wrong,
i start the HimaClearJumpCode.exe on my XDAII, and now
the XDA always in the USB/Serial V1.01 mode and any
reset or remove battery don't restart.
could someone have a idea how to reset it?
Regards
Markus

Why do you start this file ????
AFAIK this file is used during the update-process by the
HimalayUpgrade and should never be used manually.
And AFAIK it definitly thrashes your as it jumps into the bootloader.
Try to describe what you want to do !!!
Alex

you can restore your device by running the HimeUpgradeUt.exe with the xda2 cradled. it will take a minute orso before it starts.
by running the HimaClearJumpCode.exe you have erased the first 256k of your rom.
normally this is done by the upgrade tool, which first makes a backup of this part of the rom ( 80040000-80080000 ) to the top 256k ( 81fc0000-82000000 )
then runs HimaClearJumpCode.exe, then resets the device, to enter the bootloader.
and after it is done flashing other parts, it copies back the saved rom part.

itsme said:
you can restore your device by running the HimeUpgradeUt.exe with the xda2 cradled. it will take a minute orso before it starts.
by running the HimaClearJumpCode.exe you have erased the first 256k of your rom.
normally this is done by the upgrade tool, which first makes a backup of this part of the rom ( 80040000-80080000 ) to the top 256k ( 81fc0000-82000000 )
then runs HimaClearJumpCode.exe, then resets the device, to enter the bootloader.
and after it is done flashing other parts, it copies back the saved rom part.
Click to expand...
Click to collapse
hi, I am one of those stupids who did this **** again. In the restoring method, u mentioned that one has to run the HimeUpgradeUt.exe with xda2 cradled. U didn't mention if i need to have the Extended ROM in the same folder where HimeUpgradeUt.exe resides. Do I need to do place the Extended ROM image(.nbf) to that folder. If so, please suggest me a appropriate English Extended ROM name. I have searched at the ftp but unfortunately I could hardly understand by the naming of the ROM on the ftp. I want my XDAII back. please help.

upol said:
hi, I am one of those stupids who did this **** again. In the restoring method, u mentioned that one has to run the HimeUpgradeUt.exe with xda2 cradled. U didn't mention if i need to have the Extended ROM in the same folder where HimeUpgradeUt.exe resides. Do I need to do place the Extended ROM image(.nbf) to that folder. If so, please suggest me a appropriate English Extended ROM name. I have searched at the ftp but unfortunately I could hardly understand by the naming of the ROM on the ftp. I want my XDAII back. please help.
Click to expand...
Click to collapse
extROM is different part. You can update without extROM

Xbackup for jasjar

Hello,
i want to ask guys if its possible to install xbackup on jasjar,
cuz i backed up my i-mate jam on SD card, and sold it. now i want to restore the data on the jasajr, but there's no xbackup to read the "CompactFlashBackUpPim" file
can u help me in this?

Sorry cant help you on xbackup, but try Sunnysoft Backup Manager. Earlier versions were a bit iffy but this one seams to work OK.
http://www.sunnysoft.cz/en_clanek.php?clanekid=51

thanks for ur reply..
but my problem that i need to restore not to backup :?

and yeah
all i need to know how to open this file "CompactFlashBackUpPim"

Req: O2 media skin

HI Guys, had a problem when I hard-rebooted my Atom. Lost my O2media skin.Gets error message ... corrupted. Hard booting is supposed to restore all settings to default.Any body has the same problem. I would appreciate if somebody would upload the skin. Thanks.
Cheers

burn the ROM again

Hi Kropotov, thanks again for helping me out.You mean upload the new ROM again? I'm not so sure if I want to go that way-- is this the only way to get back the skin?
Cheers,

no. try this:

Like clockwork, Kropotov makes my day . Where do I put these files?
Thanks and Double cheers

put this files in:
/hidden partition/MediaCenterSkin/

Thanks Kropotov. Tried Activesync and Card Export to transfer the files to hidden storage/ mediacenterskin but keeps getting error message " Error moving file. Disk is write-protected.Remove write protection or use another disk." I'm stumped-- don't know what to do next.
Cheers

try to change file atributes (uncheck box "Lock file"), that you can copy, or copy rar archive to hidden partitionand extract files directly there.

try to change file atributes (uncheck box "Lock file"), that you can copy, or copy rar archive to hidden partitionand extract files directly there.

Thanks. I'll try it and post result.
Cheers,

Sorry but it did not worked. I was able to copy the files to hidden storage/mediacenter skin but during the file transfer, i keep getting error message ".... memory not enough.." After I soft-resetted, I checked the hidden storage/Mediacenter skin folder but no files were there. Also there was no more space in the HMemory whereas before, I used to have 8.5 Mb free.

ok. make backup using SPB backup. burn ROM again. restore.

ok. make backup using SPB backup. burn ROM again. restore.

Thanks Kropotov. Think that's the only way. BTW, is SPB Backup better than Sprite Backup?
Cheers

frankly speacing, i don't know. I use as patriot SPB :wink:

Hi Kropotov, I went to the seeo2 site to download the rom. Having gone through the upgrading steps, i came across an instruction to " Steps:
5. Verify you have the CE Image version 4260611 and Radio Image version R060428N_MN1ARC_RS00049 described as follows.
I already have the new rom version 20060426B1WWE installed on my Atom. Is it still safe to re-load the ROM? Have you done this before with no problem? Thanks for you usual advise.
cheers, :?

wizard327
yes, I did. Rom version doesn't play the role. You can burn same version or oreviouse.

Thanks for your usual quick response. I need help in upgrade since this will be the first time i will be doing this and I don't want to spoil my Atom. Shall I follow the instructions given at the seeO2 site or do you have any special instructions.I read that the safe way is to enable the bootloader mode first and this icontradicts the seeo2 instruction.Shall apprciate if you could show me the way via bootloader mode.Thanks for your patience.
cheers

forgot about bootloader mode. just download ROM from O2 site, connect to PC, run installer & follow the instruction. (of course, you must have Active Sync installed on your PC)
P.S. Charge Atom before burning.

Thanks. One more question. Shall I retain partnership with activesync or establish partnership as guest?
cheers

WM6 (Crossbow) for Typhoon + Flashing Guide! [Ready for download]

All you need:
http://www.geocities.com/gggbitonti

SORRY! fixing the link.. the site will be on line back WORKING! in 10 minutes!
thank you for segnalation
regards!

i followed the guide.
but when i turned the phone on for first time to load.
its loads slow and stays freezed...then i get an error
"Unknown SIM status.(Error 262144)
i think my radio rom maybe wrong.
if u know where to get a bin file..which i can upload via mtty1.42.exe
because i think my radio rom is old and i update to wm6 with old radio rom.
also it was a locked branded orange phone.
however before i proceeded with your tutorial i done the neseccary procedure such as regedit,,,super cid change and unlock sim
using spv services tools etc
so if you could help please i would much appreciate it..
because atm the phone is in operable and i would like to at least flash back to another rom or whateva....but it looks like i will have to do it through UI and mytt142.exe as these are the only things i can access via phone and pc.
thanks

...works fine with my sda music...only this horrible joysticbug

sandman: the .bin file for mTTY is on the last download link in the archive with WM6, here you can find mtty 1.42 to load the rom.. but to load the rom you need my SPL i share.. i don't know why it say you this sim problem rom.. the only tip i could give you is try to restart the procedure! my starting test was on a Typhoon WM5 updated.. but with the initial procedure you erase any old SPL... so, retry procedure step by step it work, i tested it 3 times before share and there are people who had success good luck!

...is there a way to solve this joystick-bug?

giuseppebitonti said:
All you need:
http://www.geocities.com/gggbitonti
Click to expand...
Click to collapse
could my make this work for htc monet

It work good at 565 but has some problems at 575 585,because the joystick and drivers are different.

weikey said:
It work good at 565 but has some problems at 575 585,because the joystick and drivers are different.
Click to expand...
Click to collapse
yessss t-mobile SDA (imate sp3i) rom update bad error joystic
keyboard dll problems wm6 rom not using

giuseppebitonti said:
All you need:
http://www.geocities.com/gggbitonti
Click to expand...
Click to collapse
Thank you so much I followed your instructions ang got a wm 6.0 typhoon ..its so cool dude...thxxx
but could be better I think if someone who know how to improve this wm 6.0 stuff...thxx

is there a way to application unlock in wm6
other than that it seems to work fine

works on imate sp3 now..

double blah

giuseppebitonti said:
All you need:
http://www.geocities.com/gggbitonti
Click to expand...
Click to collapse
Hi, thanks for the guide.
I am following the below steps in order to upgrade my untouched SPV C500.
Go to the folder where you extracted files from TyphoonNBFTools_0.3_SPL1010064_SPVServices.zip and run TyphoonNBFTools.exe
In menu select File > Open NBF... and load SPL1010064.nbf.
Right click on SPL1010064.nbf and select 'Emergency Flash' in popup menu.
Click to expand...
Click to collapse
Now, after loading SPL1010064.nbf, I am unable to proceed further. The reason is there is no SPL1010064.nbf visible there, so that I can right-click it... Could you please advise?

Never mind about previous post, I now got it to work. Looks fantastic so far, thanks a lot!
My mistake was I hadn't application unlocked the phone before.
This phone had been in a drawer for 2 years, and I believe it will again be in my hands, at least on week-ends.

Mega GREAT WORK !!!
It runs smooth on my dutch SPV C500
Who would have thought that WM6 on C500..
grtz!

didnt work for me. failed at first step with reliability test failed. Perhaps its cause i'm using vista.

I Have Application And Sim Unlocked My Phone But I Do Not Know If I Have To Do Something With The Cid Tool

FLORINOX, you have to SuperCID your phone

Hi to all...
I have flashed wm6 to my SPV C500 but my miniSD card is not working now...
???
EDIT:
I try other one and everything is ok....

Anyone in this community able to answer this question? - EDIT! - problem solved!

After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for days and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what's happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed, taken out the sd card, but nu use the darn thing still runs and kills my battery! WIFI doesn't work either!!!
What should I do?
Please help!!!
G

hard reset
The only solution that always works

funny but not helpful!
thimiost said:
The only solution that always works
Click to expand...
Click to collapse
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G

wmfreak said:
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G
Click to expand...
Click to collapse
you must read carefully it is hard reset

he just told you m8 perform a hard reset on the device

I guess nobody read my post!
evo6 said:
he just told you m8 perform a hard reset on the device
Click to expand...
Click to collapse
If look carefully it does say that I've hard reseted, reflashed with different rom including cooked rom but same problem!!!
any help?
regards,
G

Format Your sdcard. the file must be on there if youve reflashed

Done that too!
fards said:
Format Your sdcard. the file must be on there if youve reflashed
Click to expand...
Click to collapse
I even swapped SD cards, formatted them you name it I've done it!
Please share your wisdom if you have an answer!!!
PS debug tool 3.4 is what's causing the problem!

Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).

In makes sense but!
doctorcete said:
Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).
Click to expand...
Click to collapse
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G

wmfreak said:
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G
Click to expand...
Click to collapse
I know hard reset should have helped, but try letting the phone empty and then remove the battery for a couple of hours-day, then try it agian.
Mabey I don't get the question but.. how come it's still working with the debugging tool while the phone is flashed? The debugging tool is prob. placed on a special sector of the main memory normaly not accessed by a rom, the program it self doesn't run from normal memory sectors, so you might have a try with a SPL update/overwright. If all fails send it back, why would htc give you this program? they allways say send it back and you'll get a new one?...

please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given

how are you doing a hard reset?, are you using the clean memory tool software on your device, or are u pressing vol up and down simultaneously while powering on the device...... I just dont get how the program stays in memory after hard reset, even after flashing.

lucid said:
please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given
Click to expand...
Click to collapse
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur

Here is the tool! (BTW i fixed the problem)
okokur said:
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur
Click to expand...
Click to collapse
I've attached the toll. I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401. Give it a go if you know what you're doing and you can read log files.
regards,
G

You got rid of it. I edit out the post

Solution:
First backup your SD, after format with FAT32 .... reinstall your ROM and after insert your SD.

got dmmnit, glad u got rid of it, maybe we can learn how it.doez stick to the rom like that n use it in other apps like smartprotect. congrats!:

hi, do u mind sharing how u got rid of it?

I run this tool too, but after have no way to stop first try to read forum. Solution to stop program already is given from wmfreak. It is not need to make hard reset or to reformat SD card. Only things to do is to run program one more time and:
wmfreak said:
I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401.
Click to expand...
Click to collapse
Thank you wmfreak