Database Users

Wi-Fi without GPRS, possible?

Hi guy,
Now, I'am using XDA Neo with the latest dopod rom, and enjoy it very much.
I always connect the internet via WLAN at my home and sometime at hotspot in public.
I found a problem, when the signal of access point is low or none my neo try to connect GPRS automatically!!!
I don't want it to be connected and don't want to delete the GPRS setting cause sometime I wanna use it in somewhere that doesn't have a hotspot.
Is it possible to do it: when I surf the internet via WLAN no matter the signal low or none, the GPRS would not be connected?
Thanks guy

Hey, I don't know if this works for you but whenever I connect to the Internet via Wifi I turn off the phone function. I'm not sure if this is a solution for you because as you might be aware you can't receive calls anymore. :wink:
If there is a more eloquent solution to this I'd be very much interested too.

Jayxz said:
Hey, I don't know if this works for you but whenever I connect to the Internet via Wifi I turn off the phone function. I'm not sure if this is a solution for you because as you might be aware you can't receive calls anymore. :wink:
If there is a more eloquent solution to this I'd be very much interested too.
Click to expand...
Click to collapse
Go Start>Settings Then connections tab
Click Connections Icon then the 'Advanced' button
Click 'Select Networks' then in the Top drop down selection boc " programs that automatically connect to the internet should connect using'
change this to either 'My Isp' or 'My Work Network'
'My Isp' is what i use, as this has no connection set under it
then if you have no wifi access gprs can not connect
when you wish to use gprs do the above, except select whatever you connection was originally and gprs will work again

Connection preference settings

Hi,
I have had a search to see if this has been covered before but maybe I am using the wrong query.
I have an O2 Exec with the latest O2 Rom, and now when I do an email send and receive, the GPRS connection stays up. Whereas I could have sworn in the earlier ROM it disconnected after the send/receive.
I spoke to O2 and they assured me that it is supposed to do that, and since I only get charged for actaul data transfer, I can sit connected to GPRS all day for free (is this correct).
Now, my main question is. Say GPRS is up and connected, and I turn on WIFI or plug into my PC using the charger/sync cable and then do a send and receive. Will the Exec use these free connections or still route data over the GPRS?
I did a test and it looked as though when I did this, the GPRS connection was shut down, as after a send/receive and then disable WIFI, the connection setting showed a large U and not the connected icon.
I am now sitting with a GPRS connection active, email is set to manual and I have Pocket Weather set to 'Auto update on connection' and 'Auto update on Active Sync', but 'Use connection manager' is disabled as is 'Force a connect when not available'.
Should this mean that no data is used at all and that I can sit connected at no cost.
Sorry for the long rambling post, but I am a complete newbie to all this GPRS pda thing.
regards,
/Mad

related question - how to stop gprs connecting automatically
My wifi router at home is dodgy and sometimes the signal drops - this means my exec switches over automatically to GPRS (I'm not in a 3G area) and starts whacking up a big data bill before I realise. Is there anyway of getting it to ask me if I want to connect to GPRS - rather than it just telling me thats what its doing? Can't turn the phone off cos I still need to receive calls.
I did think of just scarmbling my connection settings, but now I've upgraded to the latest O2 rom the connections settings page does not show any existing connections! (I also can't get TomTom to run at all now but I guess I'll work through that one :-( )
Thanks,
John

I believe this is what you are looking for. Y
ou can set which connections programs use for thier internet access in Settings -> Connections -> Connections -> Advanced, Select Networks.
Choosing My Work Network or My ISP should stop programs sucking up your money.

Thanks PReDiToR I've tried that but it then gives me a 'cannot connect' popup instead of using the wifi - it seems as if there has to be an accessible gprs connection for it to ignore before it will try wifi :-o
What does everyone else do? Maybe you're all rich or the company pays for your data?
Thanks

Any luck yet with the GPRS / WiFi issue?? I have got the sam
webbyfoot said:
Thanks PReDiToR I've tried that but it then gives me a 'cannot connect' popup instead of using the wifi - it seems as if there has to be an accessible gprs connection for it to ignore before it will try wifi :-o
What does everyone else do? Maybe you're all rich or the company pays for your data?
Thanks
Click to expand...
Click to collapse
Any luck yet with the GPRS / WiFi issue?? I have got the same problem

Derrr...
EDIT: Hey I've just read what I've written below and its exavctly what Preditor suggested - funny didn't work when I tried ........ I guess it was because I was trying 'My ISP' without gprs settings - which complained - whereas 'My Work Network' without gprs settings allows the wifi to connect ... :?
I've now got a workaround for this - means going through the menus every time I DO want GPRS data - but thats rare till I get a better contract which will have to wait till my 12 months with O2 is up in November.. web'n'walk sounds good - unlimited gprs :-o - (could T-Mobile really tell when I was using my XDa as a modem for my laptop - which is forbidden in the terms of this contarct - and when I was just usng data for its own programs - which is allowed ??)
Anyway what I do is settings>connections>advanced>Select Networks> choose My Work Network for programs connecting to the internet. I have no gprs settings in My Work Network but it connects to wifi no problem.
So when I forget and I'm out of wifi range I get an error that it can't connect, so change the setting back to 'MY ISP' and GPRS kicks in.
A Today Screen shortcut to the Network Management screen would help - but I'm almost always using wifi so I haven't bothered.
John

GPRS keeps auto connecting, chowing battery

I have SPB pocket plus on my prophet (latest dopod rom)...
Is it possible to make it that I have to manually connect GPRS (other than going via control panel), other than letting it connect whenever it damnwell pleases? It eats the battery alive with GPRS simply staying on and idle like that!
Regarding SPB, is it possible to put an icon to connect to a SPECIFIC GPRS connection in there? With SPB gprs monitor, there is an icon, yes, but it only connects to the DEFAULT gprs connection. Also, once you click disconnect, it simply reconnects again in 20sec for some reason.
Thx

howzit, my china
i don't know of anything allowing a quick shortcut to connect/dc your GPRS, but what i've done is set my preferred networks to My ISP (which is one of the default profiles, IIRC) and My Work Network. this way, the GPRS _never_ connects, unless i specifically, and deliberately, manually connect. i very rarely require GPRS (i always use wireless networks - they're abundant here in germany), so by taking the GPRS profile out of my preferred networks, i don't have to worry about it connecting without my knowledge, clocking up crazy costs. crazy!
my question to you, though, is what is trying to connect so frequently? have you set your email accounts to check for new mail every few minutes? i'd have a look at your settings and make sure.
other than that, i can't think of much else...
later, my broe broe
(sorry, can't resisit being stereotypically south african, given the chance...)

lol, "ja swaer"
i've also made a dummy connection that doesnt work, so GPRS doesnt auto connect now unless i manually connect, but it's a schlepp to do it everytime...

If u do search guys maybe u can find everything u want,
However;
try this
http://www.gb-soft.cz/XDAII/product_gprs_tweak_en.htm :wink:

Switching off GPRS

Hi is there anyway of switching GPRS Off wuithout turning the phone off?
I want to be ablt to use wireless at home however it constantly switches to GPRS - driving me mad. I have a 1gb allowance on my GPRS but i use that for my pushmail for office mails.
I would like to be able to surf at home usig WIFI, when doing this is there a setting (not connection manager) that can turn GPRS off when i am using WIFI?

If you set your WiFi connection as connected to the Internet instead of Work, and in the network adapters setting (settings, connections, network cards, network adapters tab) set that your network card connects to the internet, once you establish an internet connection with WiFi, it should kick your GPRS connection off. On my phone GPRS still tries to connect once in a while for some reason, but never does, since the WiFi internet connection just keeps kicking it off.

abc123MDA said:
Hi is there anyway of switching GPRS Off wuithout turning the phone off?
I want to be ablt to use wireless at home however it constantly switches to GPRS - driving me mad. I have a 1gb allowance on my GPRS but i use that for my pushmail for office mails.
I would like to be able to surf at home usig WIFI, when doing this is there a setting (not connection manager) that can turn GPRS off when i am using WIFI?
Click to expand...
Click to collapse
rassah's method is more professional than mine and better perhaps. I'm lazy so I just go to connections button below on/off button and then tap off the GPRS via button that looks like a PDA with two arrows. If GPRS tries to reconnect there should be a popup if you have wifi on that allows you to cancel it's reconnection. This does not disable the phone.
Mike

thanks - i will try this - do you know if this will affect the dirct push mail?

Just thought this may help, found it on Modaco.. Works a treat, just toggles gprs data on and off... Very easy and works
Not sure how OK it is to post links to other forums but as it is free software I guess I should be OK...
http://www.modaco.com/New-FREE-Utility-t246171.html
Phil

superb application - especially usefull when roaming

Just what I needed, going overseas next month, I don't want to use any data while there.

Wifi instead of Data connection

I have been trying for a long time trying to figure out a way to use Samsung Omnia Pro b7610 wifi connection for all applications which require internet connection like windows update, widgets, browsing internet. No matter what i do, it doesnt work, although I managed to somehow use wifi for browsing internet by using IE but no other service. When I go to "Manage my connection", it shows me no option for making a wifi connection, it only shows make/edit modem connection, VPN, proxy settings and if i go to advance settings it shows my GPRS connections only for editing, if I want to make a new connection, it asks me for dialing properties only related to modem.
Please help me out, what should I do. Another thing on the top bar where all the icons are displayed for network, battery, there is an "E" in a box, as far as I think it is my GPRS connection/data connection, but when I click on this icon it takes me to network settings where there is no option for disabling it, like it does in case of wifi icon.
Regards
Inder

when you create/edit your gprs setting, you need to make sure in the "select a modem", you are using GPRS. Then you will need to setup your access point. I.E., Tmobile would be either internet2.voicestream.com or wap.voicestream.com.

i have all the GPRS settings, which my service provider sent me and I saved them. It shows all the info like access point, user name, password but my problem is not this, I do not want to use GPRS at all, instead I want my wifi to be my default connection for all internet related tasks, I want to disable GPRS.
The icon for GPRS at top task bar which is "E" in a box, does not disappear no matter what I do, I want to pay for GPRS charges for accessing internet instead I want to use wifi for this purpose, please help me out to disable this E icon, when I click on it, it takes to network settings, where all the settings are like Select band, select network -manual/automatic, wifi, 3g- which I have turned off, no GPRS enable or disable function.
My problem is simple, i want to use wifi as a default connection like we do on our PC/laptop, so that all the applications which need internet access can use wifi instead of GPRS or data connection.
Regards

i have managed the same problem with a freeware named NoData
there you can enable & disable GPRS/WAP connections
google for 'modaco nodata'