Align screen stuck - Wing, P4350 General

I just ran the RUU on my wing and after the soft reset, it turned back on, but now i can't go further than the align screen page. It seems stuck, can anybody please help with this especially since i can't get calls now?

Just incase somebody else gets a problem like this, i figured it out...i deleted the welcome file from the start up page...this should be from the activesync...

Align Screen Stuck
tandypink said:
Just incase somebody else gets a problem like this, i figured it out...i deleted the welcome file from the start up page...this should be from the activesync...
Click to expand...
Click to collapse
Im sorry perhaps I am dense but I cannot find a file named "welcome" anywhere on my HTC
T-Mobile wing
Please please please guide me. Thanks so much

you ran the RUU for which ROM???????????????
did you press firm enough?
hmm...........

Related

cant get out from align screen!!!!!!!!

need help from you guys.
my customer came to me with BOOTLOADER Screen 5.17 GSM OK, so i upgrade using SD (Patch ) and upgrade rom 3.17..., and radio 4.21,
After all complete, setup screen is come out, but i cant get out from Alignn Screen.
Can this problem solve using Software Sulition?? or it have Bad Screen ???
When i test using TEST Menu, touch test said PASS.... ???
how can it be ???
please Help
Mine is doing the same do a reset and then leave it for about 5 Min's at the loaded screen
The tap screen and then try to do align if it freezes again reset and try again sometimes it takes me 2 or 3 times to get it done
Once done it works fine until next hard reset
Only started doing this recently don't know what is causing this
Good luck
Jules
still havent suceess here.... need help
still havent suceess here.... need help
i can manage the problem by resoldering Caps around its connector.
Thx u
Please be more clear
Hello mrgsm
Please tell more clearly what you did, where exectly did you resolder?
I have the same problem.
Did the problem go away when you resoldered?
brgds
Svend_e

Help needed please

Can anyone help me out i was trying to downloading a new software upgrade for my mda pro and the computer froze on me no the phone is stuck with the screen saying with no light on serial at the top of it and at the bottom it say v2.01 but when i put the usb cable in or charge it it says usb on the screen instead of serial.The programme crash and now i cant ger out of that screen ive just told u about.I can do i hard restet and the light goes on saying press 0 to restore factory default and press x to exit.
When i press 0 it just goes back to the 1st screen i jst told u abt.With no light on and cant get light on or do anything with it.HELP i think when the update crashed on me it crashed the phone to and just kept on that screen with the serial on it.ACTIVE Sink will not work anymore when i put cable into the comptuer with my phone so updaing my phone agine will not work.Can anyone please point me in the right place to fix this promblem.Many thanx mono33
PS sorry it was so long winded but i needed to give you all the info possible i could give you.If there anything asle u need to know ust ask me and ill tell u what i can.Many thanx mono33
http://wiki.xda-developers.com/inde...ose stuck on Boot Screen (UNI_exitbootloader)
or
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
Hi there a big thanx to you for doing this for me this works great im so happy now.The 1st link is the 1 that work better for me.Its still loading up all the softwere onto my mda pro if ive got anoth problem ill get back to you.What a great site.You have just made my day.Thanx mono33
PS Im so sorry if i posted this in more that 1 place on this fourm but i did not know where to post it.

Smt5600 Rom

HELP!!!!
My phone it stuck on the Windows Mobile Screen. I can't even hard reset.. I get to the press '0' screen, I press '0' and then I get the Audiovox screen, then onto the Windows Mobile Screen. I got the phone off eBay, no waranty and I don't even know who the provider is. I was told I need a ROM but everywhere I've checked the links are broken.
Can anyone PLLLEEEEZZZEEEE let me know where I can get a ROM and which method is the best way to install it. I can only hook up by USB in the Typhoon three-color screen (can't do Activesync).
Please HELP!!!!!!
Thank you!
help? pleeeeeeeeeeeze..
aristweed said:
help? pleeeeeeeeeeeze..
Click to expand...
Click to collapse
try http://www.spv-developers.com/
i don't think anyone here is going to help you on this because this is mostly for ppc not that much smartphone stuff. hope this helps
if you do find something post link so that at least something useful gets posted here

phone wont boot into boot screen :(

hey this my first post so plz be nice!!
i got the t mobile ameo and i tried unlocking it i followed the instructions to the letter.
but something went wrong and if possiable how can i reset it back to origional settings (t mobile) or even unlock it to what i wanted so my 3 simcard can go in there. or orange.
plz help
gareth
garethmob said:
hey this my first post so plz be nice!!
i got the t mobile ameo and i tried unlocking it i followed the instructions to the letter.
but something went wrong and if possiable how can i reset it back to origional settings (t mobile) or even unlock it to what i wanted so my 3 simcard can go in there. or orange.
plz help
gareth
Click to expand...
Click to collapse
Hi, and welcome to the forum. (See! I was nice!)
Telling us that 'something went wrong' isn't really enough for us to go on.
You need to describe exactly what happens to your Ameo when you power it up, so we can give the correct advice. What do you see on the screen?
sorry lol
when i do the hard reset it does the usb boot screen but goes to a gray screen that asks me to format microdrive and then flash it. i think the op system been wipped but i cant get it to the rainbow usb boot screen for active sync to fix it
You can get it into bootloader mode by holding down the comm manager and camera buttons, then soft resetting.
From there you can re-install WM6. If you didn't succeed in unlocking the unit, you'll need to use the T-Mo compatible version of WM6 which you can find here - http://uploaded.to/?id=wbbw2u

Help! phone won't start

hey, im a newbie, and I need help...
I was trying to install TouchIT so I downloaded the applications needed from a zip file I found here on the website...
I installed ASerg Policies, Cert_spcs, and Enablerapi and did a soft reset...cause I thought I needed all that....
...than I tried to run "1__UPGRADE_ROM" and in the middle of that process, i dropped my phone, and caught it b the cable, so it got disconnected, and it gave me an error message...the screen then froze so I tried a soft reset, and it got stuck on the T-Mobile screen....I waited a long time, than did a Hard Reset, and it is still stuck on the T-Mobile screen....I can't even wake up tomorrow cause I use my phone as my alarm clock...but I have no clue what to do...can anyone help?
"run the official RUU FROM HTC" I don't really know what this means, ..but I think I need to be connected to the computer to do that, and my phone is not even doing that...
thanks for ur help....
LnrdToxic said:
hey, im a newbie, and I need help...
I was trying to install TouchIT so I downloaded the applications needed from a zip file I found here on the website...
I installed ASerg Policies, Cert_spcs, and Enablerapi and did a soft reset...cause I thought I needed all that....
...than I tried to run "1__UPGRADE_ROM" and in the middle of that process, i dropped my phone, and caught it b the cable, so it got disconnected, and it gave me an error message...the screen then froze so I tried a soft reset, and it got stuck on the T-Mobile screen....I waited a long time, than did a Hard Reset, and it is still stuck on the T-Mobile screen....I can't even wake up tomorrow cause I use my phone as my alarm clock...but I have no clue what to do...can anyone help?
"run the official RUU FROM HTC" I don't really know what this means, ..but I think I need to be connected to the computer to do that, and my phone is not even doing that...
thanks for ur help....
Click to expand...
Click to collapse
Hold down the CAMERA button while you press the reset key hole. You will enter the boot loader. Make sure you are plugged into your PC and you see the word USB at the bottom of your phone's screen. Then download and run the Tmobile RUU. There's a walkthrough written by me called the "official how to unbrick" blah blah, just search for it.
Thank you very much, im trying it right now...
Sorry for cross posting, I was desperate!

Categories

Resources