Related
Well, finally I get my device running up again! Unfortunately I wont publish it, maybe I will charge for total solution.
If u are interested, contact me by PM. This is a mail-service, so u have to send your device to me (so you pay for package sending)
Device OS recover 100%, Phone part recovered too.
Dont know If unlocks too bcoz my bricked device was unlocked state. Anyone that wants to send me a locked Herald (to test if unlocks too), would be really appreciated.
Thank you everyone for your support+post and if u want to donate, come on! Its time
See ya s00n
ps. for the Technically Experience devs/users, solution is not what u think its more complex and easy than you'll know!
wait....how did your herald get bricked?
i assume it was during a failed HardSPL
yes dude unfortunately
but the main here is to recover OS area... at least
I bricked mine and have just ubricked it. Its easy, connect USB to PC, enter bootloader, run any RUU wizard.
* Enter bootloader - Press and hold the camera key, then press the soft reset button. Hold the camera button until the bootloader menu shows it. You will see 3 different gradient colors.
For details check http://forum.xda-developers.com/showthread.php?t=327046
Good luck
if the above does not work, try flashing using the USPL
tramuyo said:
So I started this. Sounds crazy, but it can be done...
Click to expand...
Click to collapse
Hi,
I think, it's a good idea. Actually I thought about something like your thread but if you don't mind I will say something in your thread.
I've got the same problem as you've got. Moreover, I've seen a lot of users posting on this forum, which have got such a problem with their Heralds. They boot only in tri-color bootloader mode and even RUU dedicated to our models doesn't work, saying Error 300. When we are trying to use MTTY to run getdevinfo command, as a result we can see error message. That's why RUU can't check the right CID in our devices.
All known solution for Heralds don't work with our problem. We should develop or wait for being developed by someone (Olipro,pof,mestrini,...) suitable solution. There are fine solutions for bricked Wizard or Hermes so it should be the way to unlock our Heralds, too.
My idea is to count all users with bricked Heralds to see the size of the problem and to show our great developers on this forum that it is important to find a way to unbrick our Heralds. Or maybe we should establish the prize for the person who will be the first in finding the unbricking method and than donate him? I think it could motivate some of them...
So, all bricked Herald's users, please leave your post in this thread, to show the world that this is a huge problem!
My Herald is Dopod C858 (I think so, because I'm not the first owner and this is what I was told about)
IPL: 1.11.0001
SPL: 1.11.0001
Regards.
a bricked one
here is one bricked, have htc p3450 with
ipl : 1.08.0001
spl : 1.08.0001
only bootloader and RUU with error 300
hope to find solution.
mine is bricked
IPL 1.08.0001
SPL 1.08.0001
trying with every solution: forced RUU, patched RUU and their DLLs, WM5 emulator, SD-Flashing + heradiag
I was thinking in something.. Do u remember PDAVIET first version for Prophet? You cannot flash PDAVIET WM6 directly.. U have to flash a special PDAVIET WM5 to prophet first, then PDAVIET WM6. And... when u got a bricked prophet device, the solution is...? PDAVIET WM5 special rom
So, i'm on it. working hard!!
Forced RUU? I know that the Univesal has an RUU to bypasses any and all checks and just starts flashing the ROM. I wonder if this would help... I assume the IPL is still fine unless it was overwritten in your devices because it's in a different memory address in devices with an SPL lower than 4.0.0.0. We would have to create our own RUU, though.
EDIT: After some research, this will not work. If the radio was damaged but the radio bootloader was not, there might still be hope, if the radio bootloader was damaged, then it's a no go.
Ive tried with Bepe's RUU (Polaris Premium BEPE ROM) but have no luck... maybe i should try to patch IPL/SPL in RUU check
keep goin...!
UPDATE 2:
HEY
how progress on unbricking
hopefully you get it working
first sorry about my language...
at last , what the members do??? (with IPL:1.08.0001 and error 300 )???
is there any solution?????
all the members with IPL 1.08.0001 and error 300 issue are welcome
ps. need RUU Blank Device application, or a customized RUU
anyone would help?
#2 just waiting days to post a NEW, KILLER topic bcoz im just getting bored
it means we should give our ppcs to repairman to change their motherboard??????????????
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
tramuyo said:
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
Click to expand...
Click to collapse
hey men...
you can test http://s131209249.online.de/e-plus/4350main.html
it can be usful
thank you for your suggestion.. its a German ROM, i will analyze it if can be converted to a another thing..
also ive found ExtROM updater (this is new) so Ill analyze that too
thank you bro
new solution
Dear all
Good day !
Please check below link :
http://s131209249.online.de/e-plus/4350main.html
I gess you can solve this Problem to First :
install WM5 ( no mater what language you use ,only to get your PPC back to work as a workable part )
secound :
Use WM6 to start as a usuall PPC ,
Please inform us ( we are Iranian WEB master in Iran for Update & every thing that will be involved) the results & solving some of our Friends Problems in iran too ,
thanks
Your Truly
Sami
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
tighoor said:
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
Click to expand...
Click to collapse
Dear Tighoor
Hope this Email Finds you in good Health & Great Sprit !
No dear ,, this is not Hardware Problem , because You know better than me , this Problem happens while you have Problem with Core ROM ,
I'm really get fascinated to hear the Result from you ,
I'm really Hopeful that this Problem get solve by this Method ,
Please don't lessen to YAS company !
Believe me , they don't have any information about PPC , they just import & warranty
parts !
I'm Purchase manager Of matrix warranty !(www.matrixfzcuae.com)
so I know their ways ,they just import & sell ,nothing More
Please kindly do this Method & I think this Problem will solve !
thanks
Best regards
sami
I try to use HERALD-USPL and Now phone is dead..dead forever
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.e xe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
help me please.....
Unfortunately, if your SPL was below 4.0.0.0 when you HardSPL'ed, your phone is bricked and will have to be serviced by a repair center. There is no way to fix it, I'm sorry to say, other than replacing the memory chips/circuit board altogether. There is a warning about it, but unfortunately, quite a few people tend to miss it and this is the end result. I'm sorry.
thanks for info, i will donate $100 if you help me...
thanks
I've got exactly the same problem.. but
IPL :1.09.0001
SPL :1.09.0001
Hope there is a solution.
well, im proud to contradict you but fixing is possible. Just contact OliPro... he haves your solution
tramuyo said:
well, im proud to contradict you but fixing is possible. Just contact OliPro... he haves your solution
Click to expand...
Click to collapse
I don't mind being contradicted on this. I just haven't seen a fix from him anywhere.
bcoz its a server-based solution only from Olipro... just contact him...
Server based?
I know he was at least working on a possible way, but that's the last I heard of it.
oh please.... come on... where is the solution .... :-(
Hi to all Masters,
I am in need to flash my elf via JTAG but am not able to find anyways after googling so finally i decides to ask for help hear.
I need JTAG pin outs image , Its s/w & process to work on its spl hope i can get this hear aa waiting for masters to help me out..........
JTAG?
Why do you need to flash in this manner?
Yes Good Question bro.....
Have got one P3450 & some one tryed to change its language & loaded P3452 rom on it & not its stuck in tri colour/ Boot mode any ways i found its DID & CID using snoopy & mtty but this DID:-ELF010050 & CID:- VODAP102 is not avaible so the ways i know to give this cell life is in 2 options
1:- Great Olipor can do this i know very welll as he has did same one for me in past but he charges very high to creat fixer for such sets....................& this time its not so affordable soooooooo
2:- I planed to give some time on this work & try with its JTAG if it can be possible.....
If any one knows ways pleas co-operate...
Thanks to all In advance how keeps affords to build thisup......
You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.
jeremy89632 said:
You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.[/QUOTE]
How ? to unbrick withought its proper rom can u pleas healp out on it ? Have added u on my yahoo if possible pleas let me know. Waiting...........
Click to expand...
Click to collapse
alright, you can reach me by email.
because my laptop is with acer service centre.
Do you have a memory card?
Yes bro i have Memory Card........... & mailing u in few seconds
& i like your sologon
" Knowledge is power, sharing is powerful "
Share as much as you can in your life, as you may not know how many lives you will impact.
Start sharing today, because you wont know how long you can share if you don't start.
Thanks for the compliments
Glad to help.
So what process ill i need to do & yeha i ill like to know your Good Name if u dont mind
Finall no s/w stuff is working to solve this issue i need JTAG can any one help me.........................................................................
Hey, how is it going?
I sent you a few links last time, so did it work out, or .. ?
Have you flashed your phones to other ROMS before?
Or you are using the default ROM.
Thanks bro for those links but its none of my use i tryed alll but no results now am sure i need its JTAG or some one who can flash my spl in boot mode.........
let me offer you a solution.
You told me that you have a memory card right?
Great.
Follow this.
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
Cheers.
I always used to flash onyx rom using this method and its working great.
I think you can use this to flash spl / ipl or anything else. (with nbh files)
Drop me an email if you bump into any problems.
Finally My cell Got Life Back i did it naturally it costed me a lots of time & patients incluading actavitation of QMAT but i did it & am happy that i did it on mine........... Any ways thanks to alll who supported.
Butttttt still i ill like to have ways for JTAG if any one can provide........
So wait, did your phone worked in the end?
Yes its done man & thanks to u tooooooooooo
Great to hear that.
If you have any more issues, hit us back again
Well unfortunately, my 6.5 update made it to only 87% and then bricked the phone. Looks like hardspl did not take as it is not saying hard in the bootloader. Is there anyway to get a verizon 6.1 rom? Does anyone have one?
I would be very grateful for one,
-Chris
I'm in same boat. I'm attempting to use this(http://www.wmexperts.com/verizon-ozone-unofficially-gets-official-wm65) to fix it.
Please let me know if you get a fix, I'll do the same.
Nothing in the Sticky for unbricking your device helped?
http://forum.xda-developers.com/showthread.php?t=551959
Not really... espec if there is no fac roms in the wild. That's why I'm excited about an 'official' rom out there, it could help a lot of bricked ozones.
So far no luck with mine, I'm letting bat recharge.
Success!
We can now use our phones. WOOT!
http://forum.xda-developers.com/showthread.php?t=609628
Hi All,
i installed HSPL2 2.8.0000 i think and i installed Kumar ROM. after a week i installed non tmobile ROM and my phone is dead. it does not show the phone is charging and it does not turn on at all. i try Volume + Power and nothing happens. if i get a replacement phone from tmobile, do you guys think they can find out what went with this phone ? can they hold me any legal terms ? what worst can happen if they find out ?
thanks
I work for tmo customer care and the worst case scenario is that you'll be charged a $100 out of warranty fee as the issue was caused by human error not the manufacturer. As far as I am aware there are no legal ramifications. Just call and say your phone won't turn on and you don't know why. They will run you through all the troubleshooting, just make them understand the issue is NOT with your battery or charger as they may want to replace those first if they believe its a power issue.
quite a lot of people have returned tmous in that condition, after flashing a .51. radio, and no one has said anything about any comebacks. The only people that have been charged are those who sent it back where you CAN get into bootloader, and they left hspl visible.
In your case they wont be able to get into bootloader, so you should be fine.
thank you all.
you guys are the best...
Bricked my tmous HD2
samsamuel said:
quite a lot of people have returned tmous in that condition, after flashing a .51. radio, and no one has said anything about any comebacks. The only people that have been charged are those who sent it back where you CAN get into bootloader, and they left hspl visible.
In your case they wont be able to get into bootloader, so you should be fine.
Click to expand...
Click to collapse
Hi there all,
Just want to confirm one thing as I have read over 100 posts and did not find a clear answer.
So I bricked my TMOUS HTC HD2 and I Have tried all ways to get into bootloader, but no luck (v. down + power) like a million times and every time I hook the phone to the PC i get the Qualcomm Diagnostics interface 3197 com port.
These where the steps I did before it got bricked:
1- Flashed using HSPL3 to 2.08.HSPL from SPL 2.08.0000
2- To change language I Installed the following ROM (_HTC HD2_RUU_Leo_HTC_ARA_1.66.415.4_Radio_Signed_15.30. 50.07U_2.06.51.07_Ship)
3- Got a message that phone was successfully flashed with the new ROM.
4- Phone got shutdown and bricked/dead
These are my phone details before I did any of the above as I saved them before I did anything in case of any damage and forgot to investigate radio issues hehehehehe:
Rom Version: 2.10.531.1 (82076) WWE
Rom Date:02/22/10
Manila Version:2.5.20121412.1
OS Version:5.2.21889 (21889.5.0.87)
Radio Version:2.08.50.08_2
After all the posts I read, I understand that my mistake was that I flashed My tmous HD2 with a .51 radio and that's the cause for the phone to brick.
My question is:
is it possible in any way for me or a tmous service center to enter into bootloader mood using any means. if no than I'm verrrrry happy cuz they will never be able to see the HSPL I flashed.
I would appreciate your confirmation. I know you mentioned it above that they can't, but just wanted to confirm before i send it to them.
Thanks to all the help we get from everyone here. Keep up the good work
***we live and learn***
Yes. Your situation is exactly the same as the OPs. Youre ok. Send it in. Get a new one.
help!!!!!
so i think i just bricked mt hd2, i was flashing the radio rom and now the phone wont do anything......
i was trying to find a radio that worked with android.
the Fing part is that this is the replace phone i just got in and now if i call back to tmobile will they be able to see what i did to the phone, cause they will press charges for misleading info
so plz help with any info
email- [email protected]
thanks
send it in and get another one!
yeah i bricked my hd2 tmobile usa as well. I went to install HSPL again after i took it off and it went trough fine then it crashed. I'm waiting for a new 1 to arrive soon then i will send mine back and hope they cant get into anything. Nothing comes on the screen no lights at all, so i hope i can by pass
Hi
Happen the some with me. I bricked my hd2 tmobile. The big problem is that im from portugal, and tmobile dont have any assistence here. If anyone have some ideas to put my phone back to normal, i appreciate a lot. Thanks
-------------------------------------
Sent via the XDA Tapatalk App
MLowed said:
Hi
Happen the some with me. I bricked my hd2 tmobile. The big problem is that im from portugal, and tmobile dont have any assistence here. If anyone have some ideas to put my phone back to normal, i appreciate a lot. Thanks
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
there is no such thing as a unbrick unless u send your phone to a expert who can do it them selves which you can search for in the forums
ok i have HTC HD2 512 don't know how many versions out there!(just know mine was somthings to do with asian one!) i flashed radio with Radio_Leo_2.15.50.14 and it went till 99% and stucked!i can get to bootloader screen but not be able to unbrick it! funny thing is after puling out my battry for about an houre magldr loads!
i followed forum.xda-developers.com/showthread.php?t=668347 but no nothin!
i want to bye jtag! any tutorial on how to use jtag to fix bricked hd2? or any idea on how to unbrick it without jtag?
thanks