no one can help me... my herald dead now - Wing, P4350 General

I try to use HERALD-USPL and Now phone is dead..dead forever
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.e xe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
help me please.....

Unfortunately, if your SPL was below 4.0.0.0 when you HardSPL'ed, your phone is bricked and will have to be serviced by a repair center. There is no way to fix it, I'm sorry to say, other than replacing the memory chips/circuit board altogether. There is a warning about it, but unfortunately, quite a few people tend to miss it and this is the end result. I'm sorry.

thanks for info, i will donate $100 if you help me...
thanks

I've got exactly the same problem.. but
IPL :1.09.0001
SPL :1.09.0001
Hope there is a solution.

well, im proud to contradict you but fixing is possible. Just contact OliPro... he haves your solution

tramuyo said:
well, im proud to contradict you but fixing is possible. Just contact OliPro... he haves your solution
Click to expand...
Click to collapse
I don't mind being contradicted on this. I just haven't seen a fix from him anywhere.

bcoz its a server-based solution only from Olipro... just contact him...

Server based?
I know he was at least working on a possible way, but that's the last I heard of it.

oh please.... come on... where is the solution .... :-(

Related

Invalid Vendor Id and upgrade to wm6

i have the c800 with rom 1.7 , i would like to upgrade to newer version at 1.8 but at 2 % was stoping with note : INVALID VENDOR ID
Can somebody help me to this problem, i would like to upgrade to wm 6 and need the radio version more than 2.71 instead the original asia at 2.69
This lowest version make the signal always keep searching on gsm..with wm 6 os , really sad for this problems..hoping somebody can help this problem
Invalid Vedor ID means that your device is CID-locked, so you can only flash official ROM's to your phone. You can however unlock your phone at imei-check.co.uk.. BUT a person has already bricked his device with this, because it did not work properly! At this tim of speaking there is no alternative for CID-unlocking.
CID unlock...
...i have an Herald to. The OS was in finish(i think)...the only way i found to write an WWE OS...wrote to IM CHECK.CO.UK...in same day send me the application for my IMEI to unlock. I made the unlock under Vista Home Premium...now i have a brand new WWE OS in my HERALD.
Try it...it realy work.
CID unlock...
http://www.imei-check.co.uk/
But the CID unlock for what is? It's for a phone which is blocked to a company?
benmuliono888 said:
HELP PLEASE
Click to expand...
Click to collapse
Why are you posting like you have the solution and instead you are looking for help?
If you do so, only people with same problem like you will read your post!!!!
Christian
schumy said:
But the CID unlock for what is? It's for a phone which is blocked to a company?
Click to expand...
Click to collapse
For the lock that is set by the company indeed
benmuliono888 said:
HELP PLEASE
Click to expand...
Click to collapse
The title of your thread is a little bit too optimistic don't you think? If you have the solution, kudos! But if not, please watch your title.. I almost jumped a hole in the ozon layer, but too bad...
need help ( german to english)
hi
i have a german os herald need to convert it to english...have tried every thing cid unlock and all ..is shows invalid vendor id..please i m dying to use this phone i v bought it with my hard earned money..... somebody please help me ...
kunalg7 said:
hi
i have a german os herald need to convert it to english...have tried every thing cid unlock and all ..is shows invalid vendor id..please i m dying to use this phone i v bought it with my hard earned money..... somebody please help me ...
Click to expand...
Click to collapse
While the phone is on, press the soft reset button with the stylus while holding the camera button. You should then see a tri-colored screen(this is the bootloader mode, to exit simply soft reset again). What version does it say next to IPL? If it is 4.0 or higher, you need to flash HardSPL, found here. Don't do it anyway if your IPL is lower than that, it will turn your phone into an expensive doorstop. If you do have the right IPL, then proceed to flash the HardSPL, then choose your ROM and install it. However keep in mind, you won't be able to install any official ROMs while HardSPL'd. But official ROMs suck anyway.

Herald Unbrick... At least!

Well, finally I get my device running up again! Unfortunately I wont publish it, maybe I will charge for total solution.
If u are interested, contact me by PM. This is a mail-service, so u have to send your device to me (so you pay for package sending)
Device OS recover 100%, Phone part recovered too.
Dont know If unlocks too bcoz my bricked device was unlocked state. Anyone that wants to send me a locked Herald (to test if unlocks too), would be really appreciated.
Thank you everyone for your support+post and if u want to donate, come on! Its time
See ya s00n
ps. for the Technically Experience devs/users, solution is not what u think its more complex and easy than you'll know!
wait....how did your herald get bricked?
i assume it was during a failed HardSPL
yes dude unfortunately
but the main here is to recover OS area... at least
I bricked mine and have just ubricked it. Its easy, connect USB to PC, enter bootloader, run any RUU wizard.
* Enter bootloader - Press and hold the camera key, then press the soft reset button. Hold the camera button until the bootloader menu shows it. You will see 3 different gradient colors.
For details check http://forum.xda-developers.com/showthread.php?t=327046
Good luck
if the above does not work, try flashing using the USPL
tramuyo said:
So I started this. Sounds crazy, but it can be done...
Click to expand...
Click to collapse
Hi,
I think, it's a good idea. Actually I thought about something like your thread but if you don't mind I will say something in your thread.
I've got the same problem as you've got. Moreover, I've seen a lot of users posting on this forum, which have got such a problem with their Heralds. They boot only in tri-color bootloader mode and even RUU dedicated to our models doesn't work, saying Error 300. When we are trying to use MTTY to run getdevinfo command, as a result we can see error message. That's why RUU can't check the right CID in our devices.
All known solution for Heralds don't work with our problem. We should develop or wait for being developed by someone (Olipro,pof,mestrini,...) suitable solution. There are fine solutions for bricked Wizard or Hermes so it should be the way to unlock our Heralds, too.
My idea is to count all users with bricked Heralds to see the size of the problem and to show our great developers on this forum that it is important to find a way to unbrick our Heralds. Or maybe we should establish the prize for the person who will be the first in finding the unbricking method and than donate him? I think it could motivate some of them...
So, all bricked Herald's users, please leave your post in this thread, to show the world that this is a huge problem!
My Herald is Dopod C858 (I think so, because I'm not the first owner and this is what I was told about)
IPL: 1.11.0001
SPL: 1.11.0001
Regards.
a bricked one
here is one bricked, have htc p3450 with
ipl : 1.08.0001
spl : 1.08.0001
only bootloader and RUU with error 300
hope to find solution.
mine is bricked
IPL 1.08.0001
SPL 1.08.0001
trying with every solution: forced RUU, patched RUU and their DLLs, WM5 emulator, SD-Flashing + heradiag
I was thinking in something.. Do u remember PDAVIET first version for Prophet? You cannot flash PDAVIET WM6 directly.. U have to flash a special PDAVIET WM5 to prophet first, then PDAVIET WM6. And... when u got a bricked prophet device, the solution is...? PDAVIET WM5 special rom
So, i'm on it. working hard!!
Forced RUU? I know that the Univesal has an RUU to bypasses any and all checks and just starts flashing the ROM. I wonder if this would help... I assume the IPL is still fine unless it was overwritten in your devices because it's in a different memory address in devices with an SPL lower than 4.0.0.0. We would have to create our own RUU, though.
EDIT: After some research, this will not work. If the radio was damaged but the radio bootloader was not, there might still be hope, if the radio bootloader was damaged, then it's a no go.
Ive tried with Bepe's RUU (Polaris Premium BEPE ROM) but have no luck... maybe i should try to patch IPL/SPL in RUU check
keep goin...!
UPDATE 2:
HEY
how progress on unbricking
hopefully you get it working
first sorry about my language...
at last , what the members do??? (with IPL:1.08.0001 and error 300 )???
is there any solution?????
all the members with IPL 1.08.0001 and error 300 issue are welcome
ps. need RUU Blank Device application, or a customized RUU
anyone would help?
#2 just waiting days to post a NEW, KILLER topic bcoz im just getting bored
it means we should give our ppcs to repairman to change their motherboard??????????????
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
tramuyo said:
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
Click to expand...
Click to collapse
hey men...
you can test http://s131209249.online.de/e-plus/4350main.html
it can be usful
thank you for your suggestion.. its a German ROM, i will analyze it if can be converted to a another thing..
also ive found ExtROM updater (this is new) so Ill analyze that too
thank you bro
new solution
Dear all
Good day !
Please check below link :
http://s131209249.online.de/e-plus/4350main.html
I gess you can solve this Problem to First :
install WM5 ( no mater what language you use ,only to get your PPC back to work as a workable part )
secound :
Use WM6 to start as a usuall PPC ,
Please inform us ( we are Iranian WEB master in Iran for Update & every thing that will be involved) the results & solving some of our Friends Problems in iran too ,
thanks
Your Truly
Sami
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
tighoor said:
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
Click to expand...
Click to collapse
Dear Tighoor
Hope this Email Finds you in good Health & Great Sprit !
No dear ,, this is not Hardware Problem , because You know better than me , this Problem happens while you have Problem with Core ROM ,
I'm really get fascinated to hear the Result from you ,
I'm really Hopeful that this Problem get solve by this Method ,
Please don't lessen to YAS company !
Believe me , they don't have any information about PPC , they just import & warranty
parts !
I'm Purchase manager Of matrix warranty !(www.matrixfzcuae.com)
so I know their ways ,they just import & sell ,nothing More
Please kindly do this Method & I think this Problem will solve !
thanks
Best regards
sami

How to FIX INVALID MODEL ID after bad flashing

I change the rom and Advantage it´s broken!!!!!!!!!!!!!!!!!!!!
The error is ERROR 244 INVALID ID
i have flashed my unlocked athena x7500 with rom 6.1 by irius. the update breaks at 98%.
now i have only pixels on screen, and nothing happens.
in the Bootloadr following:
\
IPL-v1.00
\
SPL-v1.20 Olipro
Help... help... help...
Explain a little more by 'changing ROM'!
I was entering a rom and I was blocking the Athena by making a reset everything returned to normal but I can not enter another rom because I get this error.
As we enter the ATHENA in Bootloader I get:
, @
IPL-V1.00
, @ MFG
SPL-3.50.OliNex
Missing data?
What ROM are you coming from? What ROM did you attempt to install? How are you trying to install it?
I'm still a little confused by 'blocking the Athena by making a reset'
If you are attempting to reflash your device to a different ROM, make sure you follow the instructions posted around the site.
Are you downgrading? Using cmonex downgrader....... I hope I can help but I need a little more information from you on whats going on.
Or maybe someone else can chime in if they get it!!!!
Montecristo said:
I change the rom and Advantage it´s broken!!!!!!!!!!!!!!!!!!!!
The error is ERROR 244 INVALID ID
Help... help... help...
Click to expand...
Click to collapse
cmonex has a automated fix for that, i think its under upgrading fourm
Irus, just to take advantage of this learning opp. What did Montecristo do to the device (or try)? What happen to it?
Kenjari said:
What ROM are you coming from? What ROM did you attempt to install? How are you trying to install it?
I'm still a little confused by 'blocking the Athena by making a reset'
If you are attempting to reflash your device to a different ROM, make sure you follow the instructions posted around the site.
Are you downgrading? Using cmonex downgrader....... I hope I can help but I need a little more information from you on whats going on.
Or maybe someone else can chime in if they get it!!!!
Click to expand...
Click to collapse
I had installed the rom iRUs, then installed the new rom taxist and 98% were blocking ...
Try to re install and continues to bug me.
Please, my English is not very good ... some help ...
I made the downgrade but I continue to get the same error!
You used the wrong SPL Version
Montecristo said:
I made the downgrade but I continue to get the same error!
Click to expand...
Click to collapse
It seems that you did not read taxists instructions that it is for SPL 3.5 only
Why don't you try flashing AP3
Edit:
sorry bit of confusion with what you have done.
Were you on SPL 3.5 originally?
Did you use Cmonexs downgrade file after the failed Taxist flash?
If you did then trying AP3 for SPL 1.XX should work.
lakeman said:
It seems that you did not read taxists instructions that it is for SPL 3.5 only
Why don't you try flashing AP3
Edit:
sorry bit of confusion with what you have done.
Were you on SPL 3.5 originally?
Did you use Cmonexs downgrade file after the failed Taxist flash?
If you did then trying AP3 for SPL 1.XX should work.
Click to expand...
Click to collapse
I had the spl 3.5 when installing this ROM.
Already concerned with all rom and tell me the same problem.
same prob >> http://forum.xda-developers.com/showthread.php?t=405496
but with spl 1.2
maybe this helps http://www.xxacsxx.wg.am/ameorepair.html << but its german
xacsx said:
same prob >> http://forum.xda-developers.com/showthread.php?t=405496
but with spl 1.2
maybe this helps http://www.xxacsxx.wg.am/ameorepair.html << but its german
Click to expand...
Click to collapse
Exactly .. this is ... We saw your resolve?
IT WORKS!!!!
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4 <<< see here
my ameo lives again YEEEEEEEEEEEEEHHHAAAAAAAAAAAAAA
ok, i'll probably make a new thread and sticky that. about modelid (and wifi) restoring
but yeah until then everyone use that link,
http://forum.xda-developers.com/showthread.php?t=387454 here mainly 33rd post.
if you already managed to screw the modelid, the downgrader won't help, because it only reads the current information (of modelid and wifi) and transfers it to the right place when downgrading.
but the above link always helps. you just need a mac address to enter in the program.
cmonex said:
ok, i'll probably make a new thread and sticky that. about modelid (and wifi) restoring
but yeah until then everyone use that link,
http://forum.xda-developers.com/showthread.php?t=387454 here mainly 33rd post.
if you already managed to screw the modelid, the downgrader won't help, because it only reads the current information (of modelid and wifi) and transfers it to the right place when downgrading.
but the above link always helps. you just need a mac address to enter in the program.
Click to expand...
Click to collapse
YES!!!!!!!!!!!! YEAH!!!!!!!!!!! SI!!!!!!!!!!!!! SI !!!!!!!!!!!! MASTER!!!!!!!!!!!! GENIUS!!!!!!!!!!!! MAESTRO!!!!!!!!!!!! GENIO!!!!!!!!!!!!!!!!!!
Thanks!!!!!!!!!!!
Now'm going to donate some money for what they've done !!!!!!!!!! Thank you
Thansk!!!!!!!!!!!!!!! Xascx.
I´m very happy!!!!!!!!!!!
Sticky done, thanks CMONEX!
sergiopi said:
Sticky done, thanks CMONEX!
Click to expand...
Click to collapse
ahh I didn't notice you are a moderator thanks for stickying this.
mac number?????
hello all !
i have the same problem but with the 1.20 spl
please where i can find my athena "mac number"
what i have to do ?
please help me and sorry for my english
meybaland said:
hello all !
i have the same problem but with the 1.20 spl
please where i can find my athena "mac number"
what i have to do ?
please help me and sorry for my english
Click to expand...
Click to collapse
If you use router, the number is there....
Few questions:
How do you mess up the modeID and wifi anyway? Is it flashing to many ROMs? Does this automatically happen with the upgrade to spl 3.5? How does this happen?
Second, I have ran across my the mac address....but I'm having a blank....where can you find that at?

ELF JTAG In Need

Hi to all Masters,
I am in need to flash my elf via JTAG but am not able to find anyways after googling so finally i decides to ask for help hear.
I need JTAG pin outs image , Its s/w & process to work on its spl hope i can get this hear aa waiting for masters to help me out..........
JTAG?
Why do you need to flash in this manner?
Yes Good Question bro.....
Have got one P3450 & some one tryed to change its language & loaded P3452 rom on it & not its stuck in tri colour/ Boot mode any ways i found its DID & CID using snoopy & mtty but this DID:-ELF010050 & CID:- VODAP102 is not avaible so the ways i know to give this cell life is in 2 options
1:- Great Olipor can do this i know very welll as he has did same one for me in past but he charges very high to creat fixer for such sets....................& this time its not so affordable soooooooo
2:- I planed to give some time on this work & try with its JTAG if it can be possible.....
If any one knows ways pleas co-operate...
Thanks to all In advance how keeps affords to build thisup......
You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.
jeremy89632 said:
You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.[/QUOTE]
How ? to unbrick withought its proper rom can u pleas healp out on it ? Have added u on my yahoo if possible pleas let me know. Waiting...........
Click to expand...
Click to collapse
alright, you can reach me by email.
because my laptop is with acer service centre.
Do you have a memory card?
Yes bro i have Memory Card........... & mailing u in few seconds
& i like your sologon
" Knowledge is power, sharing is powerful "
Share as much as you can in your life, as you may not know how many lives you will impact.
Start sharing today, because you wont know how long you can share if you don't start.
Thanks for the compliments
Glad to help.
So what process ill i need to do & yeha i ill like to know your Good Name if u dont mind
Finall no s/w stuff is working to solve this issue i need JTAG can any one help me.........................................................................
Hey, how is it going?
I sent you a few links last time, so did it work out, or .. ?
Have you flashed your phones to other ROMS before?
Or you are using the default ROM.
Thanks bro for those links but its none of my use i tryed alll but no results now am sure i need its JTAG or some one who can flash my spl in boot mode.........
let me offer you a solution.
You told me that you have a memory card right?
Great.
Follow this.
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
Cheers.
I always used to flash onyx rom using this method and its working great.
I think you can use this to flash spl / ipl or anything else. (with nbh files)
Drop me an email if you bump into any problems.
Finally My cell Got Life Back i did it naturally it costed me a lots of time & patients incluading actavitation of QMAT but i did it & am happy that i did it on mine........... Any ways thanks to alll who supported.
Butttttt still i ill like to have ways for JTAG if any one can provide........
So wait, did your phone worked in the end?
Yes its done man & thanks to u tooooooooooo
Great to hear that.
If you have any more issues, hit us back again

problem with htc touch

hi guys,i've a problem with my htc touch. i tried to install a cooked rom,but now the phone doesn't work,when a try to switch on it,the words "smart mobility",but after few seconds the phone shut down,i've tried to send it on bootloader mode but without success,what should can i do =( ?
i'm sorry for my english but i'm italian lol thanks to all
Hi
Did you cid unlock your device before flashing a rom ?
tito12 said:
Hi
Did you cid unlock your device before flashing a rom ?
Click to expand...
Click to collapse
yes,in a first time the phone seemed to work,but on the windows rom screen it crashed,now,it doesn't go further the smar mobility screen =(
Try a hard reset, if not read this http://forum.xda-developers.com/showthread.php?t=406721 , I know it's a lot, but if your device is bricked you might find a solution.
By the way I'm near Verona on a vacation
tito12 said:
Try a hard reset, if not read this , I know it's a lot, but if your device is bricked you might find a solution.
By the way I'm near Verona on a vacation
Click to expand...
Click to collapse
i've tried hard reset too but nothing =( thanks for the link =) really? very beautiful city verona,i'm from como,in the north of italy,near switzerland =D
EDIT
ok i followed CyZeeK's guide (i can't post the link)
i found that my device id it's ELF010050 and the CID ID it's HTC__405 but i have 2 problems:
first,che only rom compatible with these ids it's for an elfin,when my phone it's an elf;
second,ruupdate sad that this elfin's rom it's corrupted (and it doesn't say that it isn't compatible =/ ),and now according to ruupdate all the rom's i downloaded are corrupted =/
what can i do??? thanks to all =)

Categories

Resources