Related
I use a THB car kit on my 2i, the phone answering works ok for it but the Tom Tom sound only uses the 2i speaker.
Is it possible to route it via the thb amp instead?
Which ROM build are you running? The latest O2 Rom has a patch file to route the audio through the car kit. if you do not have thsi i can mail you the file.
TT5 and Sound but with Parrot CK3300
I have a similar issue and wodered if you could help with this. The TT5 sound works fine when the XDAIIi is not in any powered cradle but as soon as I put it in a powered cradle, necessary for long journeys, the sound is auto muted somehow. The GPS system and car Kit is combined but its not physicaly connected to the XDAIIi. THe powred cradle is just that just power. Interestingly this doesn't happen on my wifes XDAIii which I haven't upgraded the ROM on.
Lazy mans answer is to revert back to the old ROM somehow but hey we like to progress!
Tom Tom sound
I have a similar problem, but i believe it is due to the fact the cradle was designed for the XDA1, but i could be wrong! I have the XDA 1 and the XDA IIi and the TOM TOM car kit works fine with the XDA1, but no sound with the XDA IIi
Can anyone help?
can the patch be used for the holux cr100, i am using pugz rom!
Please follow-up this discussion in following topic:
http://forum.xda-developers.com/viewtopic.php?t=39735
This way we keep it central. Thanks!
festen: That's a Wizzard thread not an Apline one ...
I too have a THB Bury car kit and have had the same problems and the response from THB when I contacted their support was the XDA2i is not supported. I am sure there is a way to do it tho. I was thinking of making a phono jack to plug into the headphones and then plug that into the
NAV input of my stereo
Updating the ROM did the trick, sound through the speakers for TOM TOM and the incoming phone calls.
Then it got stolen........
I guessed it right I am lazy. Reverted to a chance backup copy of the original o2 ROM and TT5 sound fine and self mute during call!
Just got a bluetooth module for my car's hand's free kit and while I can pair with it ok and use it to dial out and pick up calls, once the call connects it doesn't pass through the voice - it still comes out of the phone (XDA Exec). I've been through all the bluetooth settings and double-checked it's set up as a hands-free adapter, but I'm still getting nowhere.
Anyone got any clues before I bin this increasingly poor excuse for a phone and get something that works?
If you decide to "bin" your phone for cheap, let me know.
I have exactly the same problem with my exec and a Parrot bluetooth handsfree system. It worked perfectly well before I upgraded my phone to the latest ROM (1.30.107).
According to Parrot, I need to upgrade the ROM on my handsfree adapter. This is apparently an issue with Windows Mobile 5. You may need to do the same thing.
I haven't upgraded my Parrot system yet so can't comment if the update truely fixes the problem, but I was working perfectly before upgrading the ROM on my phone.
Ah nuts...
The bluetooth module for my hands-free kit has only just been released, so I can't see any ROM updates being available soon. Even then it will almost certainly require an expensive visit to the (probably clueless) dealers.
anyone got this working on the tytn
I use it with a Jabra BT250...
it used to work with my plantronics 320 on the wizard but wont work on the tytn is there any special settings you had to do
I also tried to make it works and it doesn't I assume that is due to the different headset plug.
Waiting for a version for TYTN
the prog will open a connection to the earpiece i can hear the static just wont forward any of the audio to it. works with the phone of course for making calls
I have the same problem with my Tytn (BTaudio seems to work because it stops the radio - I use it with a parrot car kit) but the audio still goes through the phone speaker...
did you find a solution?
gb
BTAudio On does not work, you have to turn it on via button press on the headset. BT Off works fine of course...
Rather annoying, but that's the way it is...
Sorry but I am afraid not to understand... the bt car kit is working properly and is paired to the qtek
could you please be more specific?
thks!
Sorry, you stepped into a rather cryptic response... I assumed you were talking about the file BTAudioOn.exe that worked on the 8125 but not the 8525/TYTN.
Search this forum for mono audio - there's a big thread. Also check the wiki.
attached. This cabs works great. To activate it, start playin music, then push and hold the button on your BT headset for about 1 second, it should beep and then music comes through. Only problem is you can't use MS VC through your headset, but it doesn't break VC.
BTaudio cab works
I have used the Gotland cab file and still had problems, until I began to think like a technician... Once I installed the cab file, I performed a soft reset and then repaired my Jabra JX10... It has been working fine ever since... I can hear music (either streaming or static) and voice... I have not tried tackling the voice commander problem though...
I have just upgraded the firmware on my headset using the software that is not posted on Jabra's site, but through a link in another post, I was able to do it... had to reinstall the Gotland cab again though.... May tackle Voice Commander later in the day... Who knows...
I'm using Bluemusic 2.0 and it worked with music to BT headset. Also using installed the BT VC fix cab in this forum at it worked fine with VC 1.6 - except incoming anouncements. ( Installation Hint: after installed both - you must delete existing device and then re-pairing the BT again).
I just made a thread, here http://forum.xda-developers.com/showthread.php?t=306363
I know this has been covered a bit but I have a quick question. MS is saying you need to have AKU 3.2 to get VC to announce caller's over your BT Headset. Has anyone found a simple way to make this work on an earlier ROM. Lately I've been running mostly Molski's ROM, but I dabbled in Faria's 3.2. I swore I had BT working totally with a 2.26 ROM, but am I on crack?
I liked Faria's 3.2 but I was missing too many calls. Is there any way to upgrade just teh BT in an older ROM to make this work. (I'm sure my inexperience shows in this question. If its impossible to do, just say the word and I'll patiently wait for a new 3.2 or 3.5 ROM or just forget about this)
I have two answers to your question.
The first is use the A2DP hack found in this forum and get a stereo bluetooth headset. The iTech Clip R35 or S35 both come with the two headphones; one with only one earbud, so you aren't covering both your ears. When you have a stereo bluetooth headset, all sound, including the calls from MS Voice Command are redirected to your headset.
The second is use the program found here:
http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
It basically redirects all sound to bluetooth (probably a cheaper and easier fix); I haven't tried it yet, but it seems like it might be the solution you are looking for.
I also liked having the feature of calls announced through bluetooth, but it never did seem to work. I have been meaning to download the program from the site, but just haven't gotten chance. If you try it, let me know if it works.
Thanks.
I wonder how hard it would be to get that little program to run automatically when connected to a head set
yeah theres nothign cooler than wearing a stereo headset while driving. Thanks but no thanks.
I've used BT audio with v1.5, and it wasnt for me. i still use it to listen to podcasts via my headset on occasion though.
The nice thing about 1.6 when it was working (mist have been with Faria's ROM) was that I didn't hear my normal phone ringtone through the headset. It rang like normal through my headset, but it would announce the callers name. Its a cool feature.
edit: I must have been wrong. It does divert the ringtone through your headset as well. This gives me hope that I can work somethign out using BTAudio.
Yeah it is a cool feature. You can go to the notification settings in voice command (Settings -> Personal -> Voice Command) and change it so that notifications are done when bluetooth is available (the second radio button). If the notifications cannot sound through your headset, they will come from the phone speaker so you will still be able to hear who is calling without looking at your phone. Doesn't really help if your phone is in your pocket or if you can't hear it, but I guess its the next best alternative.
I have a cooked T-mobile 2.26 ROM and use MS VC 1.6 over my BT205 no problems. I was previously using the original O2 rom and has it working on that too so both an AKU2.0 and an AKU2.3 work fine. To install try this:
remove VC if installed
remove headset pairing
soft reset
create headset pair and leave it switched on
install vc1.6
soft reset
add path string to HKLM\SOFTWARE\OEM\VoiceCommand\
i.e. \Program Files\Voice Command\VoiceCMD.exe
soft reset
then try the button on the headset a few times
Riptos
I'm not having trouble using BT with VC. I want the Incoming call announcements to come over BT.
I installed Farias 3.2 and it worked, but I decided its not a huge deal. I'll try playing around looking at some of teh links here and see if I can't work somethign out. Thanks everyone.
I would also love for voice command 1.6 to announce incoming calls to my bluetooth headset. Interestingly, low battery announcements come through the bluetooth headset, but not incoming calls. Hmmm. Any suggestions/luck getting this to work?
Best,
MJB
VC Caller ID over Bluetooth
I think you all will enjoy this hack
where did u find this hack from? is it reliable?
jacob-mda said:
where did u find this hack from? is it reliable?
Click to expand...
Click to collapse
What? You don't trust someone who's first post is somethign to put on your phone
hell no considering this a brand new mda tmobile just sent me lol..
jacob-mda said:
hell no considering this a brand new mda tmobile just sent me lol..
Click to expand...
Click to collapse
Just wanted to let everyone know I tried it out today and it works as expected. Phone audio gets redirected to BT headset on incoming calls.
but does the ringer get re-directed also? cuz if so thats DAMN ANNOYING!
Well I dont mean to sound condescending to a "senior member" cuz im just a junior but did it cross your mind to select "none" as your ringer? Oh, Btw everyone, your welcome for my fantastic little file
What exactly does the file do???
I had troubles with VC 1.6 at first, but now it seems to work OK. Maybe I accidentally followed Riptos's instructions. Don't know.
Also BTAudio is working to redirect audio when I want that to happen, since VC now closes the audio after it finishes.
The only remaining minor glitch is that after giving a dial command, the little simulated dialing noise comes over the phone speaker not the headphone. So if the phone isn't right by, I don't always know whether it has dialed or not.
Any suggestions?
I tried the CallerID program. It works just as described. The only thing is that is takes up ~443.48 KB at startup. I just installed it so I don't know if it increases after a while.
I have a question. If I understand everything correctly, with a AKU 3.2 ROM this CallerID program isn't necessary if I want to get Incoming Call Announcements over Bluetooth. Right??
Has anyone gotten VC 1.6 to announce incoming calls over a STEREO Bluetooth headset? Seems like the discussions have only been for a hands free device. Anyone?
I don't have a 3.XX ROM and Voice Command notifications work on my stereo bluetooth headset without the program because I think wtih stereo bluetooth, all sound is redirected to the headset. I didn't do anything or change any settings, it just worked. I obviously have the A2DP hack installed, but that's it.
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Yeh, the Blue Angel is a bit strange with some bluetooth devices.
I have the following issues with WM6 on my BA, which did not exist with 2003SE:
1) When Bluetooth is active, the device turns on by itself every minute or so. I understand that this is a hacked "feature" to prevent the bluetooth from turning itself off. This is probably the most annoying thing about WM5/WM6. Is there any fix I am not aware of?
2) When I start from scratch and pair my carkit (Parrot), everything works OK, except that BA's sound putput, i.e. for Microsoft Voice Command, is coming from the BA instead of the car kit. This is too low a volume, to be clearly understandable in a car. With my Universal (also on WM6) this does not happen.
3) After pairing my Asus GPS, nothing works. If I delete all paired devices and just pair my Asus without being in range of the car kit, it will work. If both devices are turned on (car kit and GPS Receiver), none works properly.
I don't use my BA on a regular basis anymore, because I have my Universal, which works flawless. However, I see no paint in upgrading to WM5/WM6 if one ends up with LESS functionality than the original 2003SE.
The only feature I will be missing is the fact that no RAM memory is used, which means one does not loose everything when the battery drains.
Are there any tips to solve these three problems?
The WLAN "bug" is not really a problem: even with 2003SE I had to occasionaly start and restart the WLAN for it to work properly.
Cheers,
vma
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
problems i still have:
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- how can i find out what BT stack i have?
- i installed that Boradcom stack 1.7 without having any succes in getting my headset to work. with or without patch1 and htcheadset! any ideas?!?
- what excactly is that HTC HEADSET ADDON ?
please answer soon, any help is very much appreciated!!!!
thx in advance,
krz
1. Same here; i think is my hands free set limitation.
2. I get the same using the Broadcomm stack; use the MS stack.
3. Depends; if you use Broadcomm/Widcomm, you have an "about" box; if you use MS, i don't know.
4. i get it working, but with audio in hands free AND speakers; annoying.
5. don't know, try Google.
DANDANA said:
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
Click to expand...
Click to collapse
What Bluetooth Stack you use ?
First, I use the existing MS Stack on Helmi WM6. BT GPS and Handsfree couldn't run at the same time.
Second, I use Broadcomm Stack 1.71. BT GPS and BT Stereo could run at the same time, but Hands-free function didn't run at all.
Give me a light please.
your bluetooth headset
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
shazzy84 said:
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
Click to expand...
Click to collapse
Yeah, Bluetooth in BA really sux... you have to choose your bt handsfree wisely, make sure you try it on BA properly before buying it... currently I am using i clip II mini, and it is giving me the same behaviour as shazzy84's
KRZTF said:
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Click to expand...
Click to collapse
Well I found a way to solve the BTA2DP problem. It supports stereo & is just fantastic. you can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right
Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Admire people who can bring an answer!
I myself only good in learning physical languanges. So need MP3 HeadSet!
Also using SuperMemo CE the most beautiful tool for language learnig!
Is there any other solution then to change the registry and the things?
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
No one to ask for help over here!
My MSN:
[email protected]
Skype:
janicic
MySpace:
www.myspace.cn/taijiyoga