Hello, I'm french and new user of the X7500.
I was in a hurry this afternoon (dumbass as I am), and I flash to WM6, no pb.
But when I try to flash to a new beautiful rom (black or touch for X7500), I didn't succeed, so I try to "unlock" it.
I looks like something was wrong during the process because now, I can go to the bootloader (where there is some numbers on the screen, after the rainbow), and I have the HTC white screen, and that's all... I blocked here.
I suceeded to Hard reset one time, but the result is the same...
Please, I saw some "bootloader pbs and solutions", but I can't figure it out.
Can you help me, I'm a little stressed right now... 8-(
Thank you in advance.
Ok, the stress is a very bad friend...
I took time and I suceeded to install an official ROM!!
Thanks to you and your old post/answers/...
I'm happy now
So now, because the touch or black ROM are SO beautiful I need to install one... I will be careful but it must be ok, I think...
Happy X7500 user...
Related
Hey guys,
I'm another happy member who bricked his Herald . I didn't unlock the thing before the flash and that is where it went wrong i think... not having an original rom, i'm stuck with a nice colorfull bootloader screen...
Now, for the good news, i have a friend, with an Herald from the exact same provider, bought 1 week later as i did... now my question:
How do i get his rom on my pda?
(if i manage to get the rom, i'll be happy to post it up here (Dutch vodafone WM5 )
Cheers
Daanoz
Daanoz said:
Hey guys,
I'm another happy member who bricked his Herald . I didn't unlock the thing before the flash and that is where it went wrong i think... not having an original rom, i'm stuck with a nice colorfull bootloader screen...
Now, for the good news, i have a friend, with an Herald from the exact same provider, bought 1 week later as i did... now my question:
How do i get his rom on my pda?
(if i manage to get the rom, i'll be happy to post it up here (Dutch vodafone WM5 )
Cheers
Daanoz
Click to expand...
Click to collapse
No chance.
You cannot flash a dump to a bricked device. You need the original RUU.
Because you cannot signe the dump os.nb to a .nbh and therefore the dump is useless.
Sorry. But check the wiki if there is an RUU for you. Normally there should be all you need!!
what about Sprite Clone?
It's an imaging tool that works like Ghost or Acronis True Image, but is designed for mobile phones. It says you can take an image of a device and dump it to another device, just like you would with a desktop PC.
If it works, then it would be the best way I can think of do a complete backup and restore of your phone (or phone to phone) provided it doesn't require an agent on the phone, or some other OS-level operation to work (meaning the phone would have to already be working).
Down side, though, is that they appear to only sell it for a minimum of 20 devices at 300 dollars a pop....
@papamopps : tried them all....
@psyop1 : damn that app sounds nice, couldn't get it form my "sources" though, so requested a trail version... lets see where it gets me
Cloning tool
Daanoz said:
@papamopps : tried them all....
@psyop1 : damn that app sounds nice, couldn't get it form my "sources" though, so requested a trail version... lets see where it gets me
Click to expand...
Click to collapse
Dannoz: I'd be interested in hearing how it works, because it may be the solution to many problems with phone dumps/backups!
hi im sorry if i ask a questian who already asked i guess.
Iv been searching for an answer but did not find any.
I´v tryed to update my rom on my qtek 9100 so i could get WM6 in to my device, but it´s always stops at 99% when im installing. so now when i turn the device om i just have the screen whit 3 diffrent coulors on, so pleace any one can you help me get WM6 in my device or else i have to jump on it and throw it in to the trash. Sorry for my poor english im an swedish idiot...
Best reegarde Andreas...
I presume that your phone is still SIM/CID locked.In order to get your phone upgraded to wm6,its required to have it CID unlocked first.
Which is your device, G3 or G4 ? Post IPL/SPL...?of the phone here,to determine the G3 or G4 version of the phone,cuz for CID unlocking,both have different methods.
Cheers!
Cant start it now... Im realy angry at that little thing now...
its all black in the display. Do you have any good thing to do about that?
got it started for just a 5sec then its blck again... done that about 3 times last houer but it want start...
When it gets like this is there no more to do other then throw it in the trach?
or is there hope , can i do like a hard reset or something?
YES got it startd, wsa the battery who was out of power...
im looking up my IPL/SPL now....
IPL 2.17
SPL2.17
Its a G3 i guess....
Andyswe said:
YES got it startd, wsa the battery who was out of power...
im looking up my IPL/SPL now....
IPL 2.17
SPL2.17
Its a G3 i guess....
Click to expand...
Click to collapse
Yes !
Its a G3,download the official stock rom of your carrier from its website,get the phone into bootloaders (multicolor screen),connect via usb cable,watch small usb appear at the bottom of the bootloader screen and run the RUU,let it complete and your phone will boot up to default status and then download WST tool and run the 'CID Action' button to verify the CID lock.unlock status.
But always get the battery charged before flashing.
Cheers!
Has installed the TNT rom now latest.
Hov do i get the HTC look whit a digital watch??
I assume you mean the HTC Touch clock. It's really a lot more than a digital clock.
Try this: http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html
which rom shall i use if i want a clean WM6 and install the htc Home plugin.?
Hello Everyone,
I'm new to all this, I bought my HTC Touch ELF0100 HTC P3452 and after a week of use it start showing the Beta test release software massage, I been reading over the forums without any success on how to solve this issue, I can't use my new phone now, please any help would be appreciate it, I forget to mention that I bought it on Ebay and it came from china, I been trying to contact the vendor with no response from his part. Again, please help me or point me to the right direction on my search for a solution of this issue.
Thanks
Esojrod
ELF0100
HTC 3452
It might be an unoriginal HTC device.
Take out your battery and check around whether you see a HTC logo, or some other words.
Windows Mobile 6.1 Lock in to Beta Massage
Thanks for replying,
If I take the battery out I can see the HTC logo on the lower right corner of the battery housing.
This maybe relevant or not, but I noticed that when I connect the device to my laptop and try to sync it, a massage pop out saying that the " device is a prototype and remember to change the vendor ID".
Is there any way I can reinstall windows mobile on it. At this time I do not have any information on the device.
Thanks for your help.
Esojrod
ELF0100
HTC 3452
Hello, follow my simple guide.
Sorry for the late reply, was settling some of my chemistry and physics work.
http://forum.xda-developers.com/showthread.php?t=525815
(Read the 7th and 8th post)
Than post everything you see there to here.
Feel free to ask me any questions.
PM if urgent.
Wait, if that dont work, go to the elf upgrading forum and Hard SPL your device.
Hello,
Thanks for all the valuable information and posting you send me, unfortunately I'm not able to sync my elf with activesync and I cant either hard reset or neither of the buttons seems to be working beside the one to control the volume, when I press the power button and this one the phone display a " Enter bootloader / updated from SD Card? " message on the screen.
Something that I can do with this little brick now?
Thanks for your help.
Esojrod
ELF0100
HTC 3452
wait, im lost.
so what did you do to your device?
Hi
Did you by your device new or seond hand as this message may be displayed after flashing the unbricker test rom
so if it is second hand this device maybe was bricked and you will need to CID unlock and flash a new rom or search for an official rom for it
I buy it on ebay and supposedly was new, when I receive it it work fine but I noticed that the date was wrong and corrected it after that all I can see is the Beta test message when it load windows mobile 6.1.
Any help you guys can provide would be greatly appreciated.
Thanks for your help.
Esojrod
ELF0100
HTC 3452
Make sure you leave negative feedback, so others do not get duped! if you cannot hard reset like normal Touch instructions, it is a Clone Elf or Elfin.. FAKE! Let others know!
the beta thing does not really mean its a fake, just could be installed incorrectly the OS, but if you caanot Hard Reset, that is a sign of a fake..... REPORT, NEG HIM!
Thanks guys,
I just found out that this is a fake ELF, I hard reset it following this link , now it it out of the Beta message, but if I try to correct the date again goes back to the same screen with it.
I know that you guys do not support fake ELF, but can I flash the rom on it to a new one, or does anybody know how to get rid of the message and use to current date and time?.
Thanks for your help.
Esojrod
ELF0100
Fake HTC 3452
Usually flashing a genuine HTC rom will brick a unoriginal phone.
You may want to try and there is a thread on it.
http://forum.xda-developers.com/showthread.php?t=529206
See how it goes.
NOT ADVISABLE.
please help im wishing to upgrade my offical rom from 1.43 to 1.48 but says my phone is not suitable??????im totally thick coming from nokia to windows,i did use search but was unable to find the answer.
thanks phil
Hello and welcome on board,
Can you post up the exact error message you are getting please?
Also read this thread...http://forum.xda-developers.com/showthread.php?t=609477 which you will fond useful and come back with any questions.
Incidentally you are not a fool for asking as long as you have searched first.
WB
hi mate thanks for the reply,when i go to the htc offical rom download,i'm asked to enter my serial number,which i do but says my device is not suitable and won't let me proceed any further??
cheers phil
got a major problem now ive tried to update to 1.48 but it crashed now i get a warning traingle on start up,and can go into bootloader screen and it says upgrade rom code error please try again???someone please help.i hope i havent bricked my phone
Is your HD2 branded? (bought it in combination with a contract?)
hi mate its on vodafone contract buts its not branded.
Hi again,
Have you tried to hard reset your phone to see if the old rom boots up again?
If it does not then you might want to reflash your existing rom onto your phone using the SD card method (look at the threads at the top of the Rom Development page to find what you are looking for).
If it works and you are still keen to upgrade the rom you need to read the threads on using either the Goldcard or HardSPL methods to upgrade.
Come back and let us know how you got on.
WB
hi mate i was having the exact same probs as the chap in the hd2 bricked thread,same messages etc and stopping at 9% i took there advice and reflashed the hpsl again which has worked a treat,i'm now a little dubious bout trying to upgrade as i don't fancy bricking it.
ive emailed htc to see why i cant upgrade from 1.43 to 1.48 seems odd it says my phone isnt suitable.
p.s thanks for the help mate much appreciated
OK, wait until you hear back from them. However if you are now up and running and have installed HardSPL, I think you will find that flashing a new radio on its own might help solve your problems.
I think if you look at the thread you were referring to (this one...http://forum.xda-developers.com/showthread.php?t=618084), IIRC, MysticGenius runs through a procedure for doing this that helped him sort out a similar problem.
Good luck with it.
WB
PS: Lesson learned here though is to read exhaustively on the topics on here BEFORE jumping in as fixing problems later can be both time consuming, if you are lucky, and a pain in the rear. As for that horrible sick feeling you get when you think you have bricked £500 worth of phone....wouldn't recommend it to my worst enemy!
WB
Hi guys
Really like the forum
Ok
So i've been asked to unlock a this phone as a favor
So got home after having some drinks(not the best idea) and tried unlocking it
Long story short i installed a wrong spl as i understand and now the phone stays on the splash screen
I did lots of research in the forum, allot of ppl have the same problem, but didnt find a complete answer on how to fix this
as i now understand i should first application unlock it, then hard spl and then flash custom rom
On the Bootloader it says
"cEDA100
SPL-0-39.0000
MicroP-Cedar.W(LED) v58B"
And on the bottom "Serial" witch as i now understand means its not application unlocked?
So when i try to flash it it allways stays on 0%
And as i said it stops on the htc splash screen
Tried hard resetting the first way, but nothing. Cant find the original telus rom and i dont have an htc donor to do the 3rd hard reset way
Any help would be much appreciated right now guys ASAP cause am leaving canada by 2mrw
Thanks for reading
Hope u can help
Moved to general as not rom development
Anyone?
C'mon guys xD
Give me something
^^