Check Here
http://www.freewarepocketpc.net/ppc-download-isecretary-v1-1.html
Hi,
here is the new Version 2.3
wfg
Starbase64
Won't work on a lot of devices. Can't record directly from the radio.
what devices does this work with? does the answerphone work silently by intercepting the audio stream of the call. I though this couldn't be done.
If it can be done. How!! Could have lots of fun with this feature
Has anybody testet this on a TyTn II ?
this software ask me for the netCF.. where can i get NetCF?
Tried the newest version 3 on Trinity and it does not work. It cannot play the outgoing message. I hope they can get this working on Trinity.
Not workin'
It's not workin' on my Universal WM5, i unzipped the folder, double-clicked on .exe file, nothin' happens.
After some testing I can say its working fine on my Hermes.
Recording quality is pretty good and it's customizable.
The call being receveid and recorded can be heard trough inner or outer speaker of the pda.
The pda microphone is switched off excepting for the first seconds while your message is played back to the caller.
I'm using iSecretary 3.0... you can find it here.
N1kko said:
After some testing I can say its working fine on my Hermes.
Recording quality is pretty good and it's customizable.
The call being receveid and recorded can be heard trough inner or outer speaker of the pda.
The pda microphone is switched off excepting for the first seconds while your message is played back to the caller.
I'm using iSecretary 3.0... you can find it here.
Click to expand...
Click to collapse
You mean that you can still record with good quality even when not in speakerphone mode, i.e. the software doesn't depend on the microphone picking up the call from the loudspeaker? If that's the case then the developer deserves the Nobel Price! Up until now everyone(?) have thought that this was impossible due to hardware limitations in the Hermes and almost all other PPC phones from HTC.
N1kko said:
After some testing I can say its working fine on my Hermes.
Recording quality is pretty good and it's customizable.
The call being receveid and recorded can be heard trough inner or outer speaker of the pda.
The pda microphone is switched off excepting for the first seconds while your message is played back to the caller.
I'm using iSecretary 3.0... you can find it here.
Click to expand...
Click to collapse
I downloaded the version 3 as well, installed the cab. I don't know why the f**k, it ain't workin' on my Universal WM5, even though it mentions clearly in this website, that it's compatible with WM5.
Any suggestions ?
P.S what is Compact FrameWork v2 mentioned on that website ? Is that .NET Framework, anyone with the link ?
Agreed..
abubasim said:
You mean that you can still record with good quality even when not in speakerphone mode, i.e. the software doesn't depend on the microphone picking up the call from the loudspeaker? If that's the case then the developer deserves the Nobel Price! Up until now everyone(?) have thought that this was impossible due to hardware limitations in the Hermes and almost all other PPC phones from HTC.
Click to expand...
Click to collapse
I truly agree on that, that is why i really wanna try this application. B'cuz, as far as we know, the hardware of WM phones ain't compatible to record sounds from microphone. Same is the case with Call Recorder.
got it running on the herald without issues.....nice app although I still wish I could get the Answering Machine from the stealth....but like someone said before I thought this could not be done with HTC devices so I'm happy anyway
Does it do as I suspect and just put the call audio to the speakerphone and then record that via the microphone?
CRCinAU said:
Does it do as I suspect and just put the call audio to the speakerphone and then record that via the microphone?
Click to expand...
Click to collapse
yeah, absolutely pal. It's like the answerin' machine in symbian phones. The only difference is that, speakerphone is a compulsion(or a limitation) here, b'cuz of hardware incompatibility.
Adieu..
Hrrrm - thought so.... DO NOT WANT.
WOW is work on my HTC Touch!!! I'm using iSecretary 3.0 is wayyy better then the old vers.........
if they make play message easy i will buy right away!!
I couldnt get iSecretary to work on my Kaiser (Tytn II) i mean it would run but when people would call in they could not hear the voice message.
4.4 wont work on my jasjar
Why I Secretary can’t mute the microphone of my xperia x1 and why the caller can’t hear my answer message
How can I fix this using registry or any tweak tool for windows mobile 6.1
thanks
Related
Anyone figure this out yet?
I have tried all of the suggestions on here and none work??
shawnthecableguy said:
Anyone figure this out yet?
I have tried all of the suggestions on here and none work??
Click to expand...
Click to collapse
Hi there,
I'm not sure if i'm right, but i've read that the Himalaya (XDA2) can't record voice from phone calls.
Actually there is a way to record them, but you need to activate the speakerphone. The built-in mike will be able to pickup the sounds coming from the speakers, hence the two-way recording of voice calls. :wink:
Regards,
AcidSlide
Yes that's how it works for the Magician too.
But you don't have to put the speakerphone on.
You may also want to read http://www.pocketpcmag.com/blogs/index.php?blog=3&p=513&more=1 on this subject - it gives a nice overview of what you can expect from PPC PE devices and what applications there're to (even automatically) record phone calls.
I have a working piece of soft:
[edit] Funny, their sire reads:
http://1800message.com/
CONFIDENTIAL, NOT FOR PUBLIC DISPLAY. DEMO SITE ONLY.
[/edit]
http://1800message.com/SPWM5CallRec.cab
http://king-bg.info/Temp/c500/soft/SPWM5CallRec.cab
It works, I have this to say:
1. I placed a shortcut to it in my STARTUP so it starts upon bootup, do you have any idea how I can make it start MINIMIZED?
2. As with all similar programs, the other party sound is with lower volume, but still can hear it
3. Records are in some internal format and can be played only with this program
Other the that I like it and it can be useful to you
Also note that in your country it may be illegal to record the conversations.
I use it mainly when someone call me with directions to some place ot phone numbers and so..
Something seems kinda fishy here, I highly doubt a company would post anything "highly confidential" and "not for public display" on PUBLIC INTERNET. Anyone else try this program? Seems like it could contain some malware/virus etc..
MilanoRex said:
Something seems kinda fishy here, I highly doubt a company would post anything "highly confidential" and "not for public display" on PUBLIC INTERNET. Anyone else try this program? Seems like it could contain some malware/virus etc..
Click to expand...
Click to collapse
I don't know what it is but it works on my PPC
do a google and it will pop-up on several other forums.
Well sounds fishy for me too...
Anyone else tried it?
this program only works if you have your speaker loud enough for your microphone to pick up the sound from it. I talked to their tech support last month and it went something like this.
> i've been playing around with pmvault and pm recorder on an htc wizard
> phone. Vault works flawlessly and is so convenient. Recorder doesn't
> record incoming audio though. My voice can be heard fine, but not the
> person I'm talking to. I know that the wizard devices are pocket pcs and
> not smartphones, but WM5 for ppc is supposed to run programs for both. Any
> thoughts on it?
>
The Wizard does not support the dual audio path. the HTC Tornado and Cingular 2125 both support it, but the PPC Wizard does not. Sorry about that. It is a hardware limitation on the device.
as already has been said,
the wizard will only record the audio picked up by the microphone,
if the speaker is loud enough the sound is picked up.
You may also want to read http://www.pocketpcmag.com/blogs/index.php?blog=3&p=513&more=1 on this subject - it gives a nice overview of what you can expect from PPC PE devices and what applications there're to (even automatically) record phone calls.
from my understanding it must be possible to access the incoming GSM audio stream - somehow it must be handed over to the CE-side, as the bluetooth driver also gets that stream - or did I get it wrong??? *confused*
Mamaich says that the GSM audio is wired directly into the bluetooth hardware.
V
vijay555 said:
Mamaich says that the GSM audio is wired directly into the bluetooth hardware.
V
Click to expand...
Click to collapse
so does that mean it is also not possible to record a phone call if you are using a BT headset?
Or a little bluetooth device that does the recording? ...
Dear wizard owners - could you please check how this call recording software works on your device.
http://1800message.com/default.aspx
in the end of that page there is a link for PMRecorder - there is cab file for it.
1) is it working in general?
2) does it record two parties well if used without headset?
3) does it record two parties if bluetooth headset is used?
4) what is quality of recording.
I am thinking to moving from jam to wizard or prophet only becouse of that software.
gluhov: if you're prepared to move phones for this feature, consider the gigabyte phones.
V
please give a link for that phone
gluhov said:
Dear wizard owners - could you please check how this call recording software works on your device.
http://1800message.com/default.aspx
in the end of that page there is a link for PMRecorder - there is cab file for it.
1) is it working in general?
2) does it record two parties well if used without headset?
3) does it record two parties if bluetooth headset is used?
4) what is quality of recording.
I am thinking to moving from jam to wizard or prophet only becouse of that software.
Click to expand...
Click to collapse
PMRecorder does work well however you have to have all your conversations in speakerphone mode to pickup the person talking on the other end. The website says this is a limitation by the manufacturer (although not sure if the mean the HTC's, MS or the OEMs)
Cheers
Excellent review of the GigaByte:
http://www.pocketpcthoughts.com/articles.php?action=expand,46925
Not sure if it's available yet, but I wants it!
V
WOW!!
I wants it too - I'm beginning to think the Wiz is a bit of a dead loss anyway
You can't beat an old 6310i as a phone
The Gigabyte phone has got all the functions that the Wiz is missing - and look at that camera !!!
Offtopic:
And the TV I think I'll wait for one as well. I need to upgrade in the next few months. I'm thinking either Atom or Gigabyte. But the Giga looks very very nice software wise. Don't like the styling much.. but the features Would be nice to get a rom dump of that. Oh, I think I've got one somewhere...
V
gluhov: If you are considering the gigabyte for the call recording, on reading the review it looks like it may have the same functionality as PMRecorder. As it says "you can record your own telephone conversations", I would clarification of what is meant by "your own conversations" To me this sounds like one sided recording, although i presume the speaker method would work here as well.
However it is a nicely feature packed device, i wouldnt mind getting my hands on one myself although i think i have gotten used to the Wizards keyboard and (slowish) speed now. I just want my A2DP!!!
Cheers
The recorder in the 'notes' application will happily record both sides as well - the other side will be a bit noisier/fainter, but unless you're recording for criminal evidence, that shouldn't be a problem. ( And keep in mind that many countries have laws prohibiting conversation recording unless you make this explicitly clear to the other side )
As for the Gigabyte - looks nice, specs-wise. However - no Edge? So definitely no UMTS/HSDPA. Not a huge loss, perhaps, but if you're aiming for the future anyway, it might be worth waiting for whatever they'll come out with next?
Guys - lets stop talking about these gygobyte.
PLEASE TEST THAT APLICATION AND ANSWER MY QUESTION - that will really help.
vijay555 said:
Offtopic:
And the TV I think I'll wait for one as well. I need to upgrade in the next few months. I'm thinking either Atom or Gigabyte. But the Giga looks very very nice software wise. Don't like the styling much.. but the features Would be nice to get a rom dump of that. Oh, I think I've got one somewhere...
V
Click to expand...
Click to collapse
Gigabyte (Around US$700)and Atom (US$750) already for sales in Hong Kong for a while.
The REAL device of gigabyte is suck I'm sorry to tell you that.
The TV function ONLY support NTSC and which doesn't support PAL as they have mention. And the screen is too small. And there is serveral problem awaiting to fix.
1. Bluetooth A2DP issue. Auto disconnect once the device screen is off.
2. If incoming call pop up, if your didn't recived the call. The "incoming call" screen still there, even the other side already drop the line.
3. When open the function inside the phone. the device Vol will auto turn to silent. even no vibrate.
4.The camera is RED. Outdoor/ Indoor. All photo seems auto in RED tune.
New rom been release in Early Feb. But same problem still found.
And Atom is keep fixing their probelm. They are like haven't more than
one updat per month. And the device now is very smooth today. But I think there must be more update coming very soon.
gluhov said:
Dear wizard owners - could you please check how this call recording software works on your device.
http://1800message.com/default.aspx
in the end of that page there is a link for PMRecorder - there is cab file for it.
1) is it working in general?
2) does it record two parties well if used without headset?
3) does it record two parties if bluetooth headset is used?
4) what is quality of recording.
Click to expand...
Click to collapse
Please read http://www.pocketpcmag.com/blogs/index.php?blog=3&p=513&more=1 for a complete discussion of the subject.
of course i read it.
i just need an answer from real user
it doesn't record incoming audio. you'd have to get a htc typhoon(i think) smartphone device to do this.
Are you tru wizrd owner?
Doesn't work on my Wizard (Vario)
gluhov said:
Are you tru wizrd owner?
Click to expand...
Click to collapse
Yes I am. I actually e-mailed the company about this awhile back and heres what they told me.
"Techsupport to me 12/27/05
The Wizard does not support the dual audio path. the HTC Tornado and Cingular 2125 both support it, but the PPC Wizard does not. Sorry about that. It is a hardware limitation on the device.
> i've been playing around with pmvault and pm recorder on an htc wizard
> phone. Vault works flawlessly and is so convenient. Recorder doesn't
> record incoming audio though. My voice can be heard fine, but not the
> person I'm talking to. I know that the wizard devices are pocket pcs and
> not smartphones, but WM5 for ppc is supposed to run programs for both. Any
> thoughts on it?"
hmm.
if you use speacker phohe - will it help to record second part or not?
Becouse on magician if you use it everything is recorded very well.
Nope, it just records my voice. The other's voice is very faint audible when set to speaker mode, but certainly not loud en clear enough to understand.
I have a Wizard and use PMRecorder. Although the other party is faint on a recording it is possible to hear and understand them.
i've been looking for the answer ( i think it should have been something that more people are suffering from but i was wrong )
i have a new headset. the sony hbh-ds970 nifty little thing. however when i'm receiving a call i only see the phone number on the screen. is there a way to display the name that the call is from when it is in my phonebook?
p.s. i'm using that upgrade to enable a2dp
Yes I know, it's really hard to find something here. Indeed there are more people than only you, who would like this feature to be supported! But bad news! Please read my little review of the headset in combination with the Magician in the A2DP thread: http://forum.xda-developers.com/viewtopic.php?p=337217#337217! So far only the point that MortPlayer does not support AVRCP is outdated.
The short conclusion, that matches also this thread is: "To sum up, the HBH-DS970 is a high quality product and the "Walkman" logo on it is justified. Only the Magician is not an equal counterpart to it."
well i'm willing to start on such an application. but i was looking yesterday, and since havn't found any sdk for the ppc2003se bluetooth stack. No api, actually finding info on a2dp or avrcd was pretty hard to come by.
Can anyone point me in the right direction (sdk for the ppc2003se bluetoothstack?)
i have some good ideas on how to implement the stuff.
That would be really nice! But I don't know if there is an SDK for the stack, maybe ask in a seperate thread!?
hmm why does the caller id sometimes work and sometimes not? i just got a call from a friend, and his name was in the screen, after the call i tried to phone and i got the right name in screen... pretty weird :S
Guys,
try this app (JETware Hands-free Extension for Windows Mobile phones) @ http://www.jetwaremobile.com/index.htm
It works!
The best option until M$ decides to implement it by their own in BT stack...
Conchas said:
Guys,
try this app (JETware Hands-free Extension for Windows Mobile phones) @ http://www.jetwaremobile.com/index.htm
It works!
The best option until M$ decides to implement it by their own in BT stack...
Click to expand...
Click to collapse
I mentioned this already and it does NOT work for me!
Unauthorized said:
I mentioned this already and it does NOT work for me!
Click to expand...
Click to collapse
Luckily, It work with my magician, Name of incoming call display correctly in Sony DS970 bluetooth
I just got the Microsoft Voice Command 1.6 (refer to as VC from here on) this morning and so far it has been quite disappointing.
I am using it on a Cingular 8525 with a Sony Ericsson HBH-GV435 headset (both are BT 2.0).
Right after the installation I noticed that the talk button on the headset did not trigger the VC so I did a power cycling.
After the power cycling the button will now trigger the VC as if I pushed the VC button on the phone but the problem is that it is not picking up my voice command via the headset but it is still listening from the phone's mic.
Any thoughts on this?
hjkl;' why no delete?
skygear said:
did you try to go under your d\settingd to chsnge the buttons? i think you have to reg edit the files for ear pice mic
Click to expand...
Click to collapse
I didn't know that.....I'm going to try and search for it. Can you maybe post a linky for the info on how to do that?
thx!
Version 1.6 at present time DOES NOT WORK properly with the TyTN. You should go back to V1.5 and wait for a patch...
goestoeleven said:
Version 1.6 at present time DOES NOT WORK properly with the TyTN. You should go back to V1.5 and wait for a patch...
Click to expand...
Click to collapse
I see. Thanks for the info. Hope the patch will be available soon!
What is the probelm with the ver 1.6 and the TyTn? Is it just the TyTN rom or does it not function with the JasJam or the 8525 either?
Dp you guys know this by experience or is it posted somewhere?
PocketPCThoughts list the 8525 as a "compatible device".
The problem will affect all Hermes devices, and it will probably require a patch / a new dll and/or a registry hack to make things work properly. It should work, but it doesn't, and this goes to show you what a poor job of testing was done before product release.
If the single biggest additional feature/function (ie, bluetooth support) doesn't work properly, why was it shipped?
goestoeleven said:
The problem will affect all Hermes devices, and it will probably require a patch / a new dll and/or a registry hack to make things work properly. It should work, but it doesn't, and this goes to show you what a poor job of testing was done before product release.
If the single biggest additional feature/function (ie, bluetooth support) doesn't work properly, why was it shipped?
Click to expand...
Click to collapse
Come on folks... This is MS we are talking about...
If it had been a software package with a little penguin or a devil on it we would be just fine
mrderby said:
Come on folks... This is MS we are talking about...
If it had been a software package with a little penguin or a devil on it we would be just fine
Click to expand...
Click to collapse
Or maybe we should start to look at HTC... Their implementation of the whole bluetooth "feature" is crap too... AD2P anybody? well let's hack the crap out of the register, and than try to be happy with songs that hickup every 30 secs or so... neah great!
First: Hermes generally does not work with BT2.0, I guess, especially my MDAvario2 does not...
I'm using a BT Headset HBH608, which was perfectly working with every phone I've ever tried...
Second: VC1.6 could not be installed on Vario2' and Hermes Devices at all, getting an error message...
VC1.5 (engl.) works, not perfect, but it usually works...
MickKnatterton said:
First: Hermes generally does not work with BT2.0, I guess, especially my MDAvario2 does not...
I'm using a BT Headset HBH608, which was perfectly working with every phone I've ever tried...
Second: VC1.6 could not be installed on Vario2' and Hermes Devices at all, getting an error message...
VC1.5 (engl.) works, not perfect, but it usually works...
Click to expand...
Click to collapse
What do you mean it cant be installed. I have it installed on a TyTn and it works perfectly. I am not using a BT headset, so cant comment on that.
I've got v1.6 on an 8525 and it seems to working fine.
what exactly are the problems others are having with Hermes devices?
@DigitalFX: Hermes does support Bluetooth 2.0, but not Enhanced Data Rate.
@JCrompton: MSVC 1.6 does not route sounds/commands properly through a Bluetooth headset on the Hermes. You may be able to initiate a call with your headset button, but you'll be using the mic/speaker on the Hermes to complete it. Also, sounds/announcements are not working as advertised. HTC and M$ are working on a patch.
VC 1.6 works fine on my MDA with Motorola BT headset.
Mark (NL) said:
Or maybe we should start to look at HTC... Their implementation of the whole bluetooth "feature" is crap too... AD2P anybody? well let's hack the crap out of the register, and than try to be happy with songs that hickup every 30 secs or so... neah great!
Click to expand...
Click to collapse
Seriously, why dind't any OEM use the Widcomm stack instead of the crappy MS one ?!
If only there was a way to hack the Widcomm stack and replace the MS one like they did with the Dell axims..
Adi
goestoeleven said:
@DigitalFX: Hermes does support Bluetooth 2.0, but not Enhanced Data Rate.
@JCrompton: MSVC 1.6 does not route sounds/commands properly through a Bluetooth headset on the Hermes. You may be able to initiate a call with your headset button, but you'll be using the mic/speaker on the Hermes to complete it. Also, sounds/announcements are not working as advertised. HTC and M$ are working on a patch.
Click to expand...
Click to collapse
Has anyone tried this... (look for the cab)
http://forum.xda-developers.com/showthread.php?t=283412&page=5
My 8525 works fine with 1.6 and my SE662 BT headset. Calls can be activated over BT using headset button, and audio routes to my headset throughout my call.
URPREY said:
My 8525 works fine with 1.6 and my SE662 BT headset. Calls can be activated over BT using headset button, and audio routes to my headset throughout my call.
Click to expand...
Click to collapse
Wow! Have you done any registry hacks? I'd love to see what your Voice Command keys look like....
TIA,
Richard
I have an 8525 also, and 1.6 works as MS says it does.
The headset button activates voice command, the Beep occurs on the 8525, and the mike on the 8525 listens for input. If I say, Dial ... or Call... then the call works fine on the BT headset like expected.
I know a patch is in the works to fix this issue, and when they do, 1.6 is superior to 1.5 for voice interpretation.
However, for now, I have 1.5 working perfectly fine. All features work, and all I had to do was enter/change 2 registry keys (only 1 was necessary)
xcsdm said:
I have an 8525 also, and 1.6 works as MS says it does.
The headset button activates voice command, the Beep occurs on the 8525, and the mike on the 8525 listens for input. If I say, Dial ... or Call... then the call works fine on the BT headset like expected.
Click to expand...
Click to collapse
So how loud do you have to shout for the mike on the 8525 to hear you if the phone is in the next room, or in your purse or you're driving? It might be the way MS intended it to work, but I doubt it.
[RANT]
I can't believe that MS wouldn't have caught this problem during beta testing. Speaks volumes (pun intended) for the current state of software development and testing at MS. Anyone know if MS Reader works with WM5 yet? How about full multi-user support for ActiveSync? Win XP has been around for years now with this funtionality. And while I am on my rant, how about SP3 for Win XP? Currently we would have to download and install over 70 (!) critical patches to SP2 just to get our computers to the dynamic state they are at today. Come on MS, enough is enough. Get your s#!* together!!
[/RANT]
John