I have installed the Sandisk WIFI on my XDAII for internet and network (Resco Explorer). All is connected to my Wi-fi ADSL Modem/Router with a network cable to my PC. It all works fine.
I do have two questions, just to make myself sure:
Settings > Connections.
1. I set the connection as "Internet". What is the meaning of "Work"?
2. Why should I set up a VPN? And what is it? I set up a VPN with info from my ADSL provider.
Bart
It aint very well explained in the manual and is not intuative at all. An 'internet' connection is one through wish you can obtain internet access, A 'work' connection is one through which you can access your internal servers, but not obtain internet access. In a 'work' profile, you can make a change in the proxy server settings such that you can, through a 'work' profile obtain internet access.
VPN is 'virtual private network' this is a secure connection to your work/home network that is routed over the internet. Via a VPN, you can for instance browse network shares on your work network, or connect to the company intranet. To use a VPN connection, you need to have a VPN server to connect. A VPN server may be provided by your company or your router may support it. NB: A VPN Passthrough on a router is not a VPN server - it simply means that you can VPN out from a natted machine on your LAN, or, in some cases, place a VPN server within your lan.
My device is setup as follows in connections --> Network Management
Under the first drop down for internet I have a profile 'My ISP' with a single GPRS connection to APN: mobile.o2.co.uk defined
Under the second drop down for work, I have a profile 'VPN Settings' which simply has 2 VPN settings defined 'Work VPN' and 'Home VPN' (all other settings, eg 'modem' are left blank).
When I connect via GPRS to mobile.o2.co.uk, I get 2 VPN options appear the connected GPRS connection (in the 'connectivity' speech bubble that appears when you click the connections icon in the bar @ the top). These are 'Work VPN' and 'Home VPN' with a 'connect vpn' option next to them. I just manually connect these as required.
For WiFi, I make sure that my wifi adapter and wifi network I am connected to is labeled as 'internet' rather than 'work'. I then get the VPN options mentioned above appearing below my wifi connection in the 'connectivity' speech bubble. Unfortunately they refuse to connect!! I dont know why. Looking through the forums, it seems that no one is able to get the VPN to connect over an existing wifi connection.
Hope this helps
Nigel
I have an 8125 and access the internet in 3 different ways:
1: work uses a proxy for their secure wi-fi network
2: Cingular uses proxy for gprs
3: Home wi-fi network doesn't have a proxy
Can someone tell me how I can easily switch between these networks without having to change the connections settings? Is there a program that can be downloaded to help with the changes?
Thanks!
I also have a 8125. I have the proxy network settings under the "Work Network" settings, and the non-proxy under the "My ISP" settings. When I want to use WiFi or non-proxy, the 8125 will just automatically connect OK. When I need to use the proxy, I start IE and go to wsp://device.home and that forces it to connect to the Work Network.
Okay, this has been bugging me for a long time, so I decided to solve this by myself once and for all.
Situation:
1. GPRS requires a proxy connection
2. WiFi and ActiveSync (A.S. on PC when connecting to an Exchange Server) "inherit" the same GPRS proxy settings, and are unable to connect to that proxy server, which make them both unusable.
So, naturally, I configured "The Internet" connection to use the GPRS access point and the GPRS proxy,
And "My Work Network" to be an internet connection WITHOUT a proxy.
But for some reason, that doesn't work.
The connections tab doesn't let "My Work Network" to be a "proxyless" internet connection.
I tried many configurations, trying to fool the wifi connection, until I got to a final solution that works.
The wifi knows to pick the connection without the proxy, so does the activesync, and so does the default GPRS connection, when no other connection is present, automatically!
So, the solution is this:
1. Go to the Start->Settings->Connections->Advanced tab->Select networks
Under "Programs that… Internet should connect using"
Click New to create a new connection:
Name for settings: Direct Internet
Modem: Leave Blank
Proxy Settings:
This network connects to the internet [Check]
This network uses a proxy [Uncheck, or Check and fill in your home proxy settings]
Click OK.
2. Under "Programs that… private network should connect using"
Click New to create a new connection:
Name for settings: GPRS Internet
Modem: Click New, and follow the wizard to add your GPRS access point.
Proxy Settings:
This network connects to the internet [Check]
This network uses a proxy [Uncheck, or Check and fill in your GPRS proxy settings]
Click OK until all windows are closed.
3. Now we need to get WiFi and AS to use the "Direct Internet" we created.
Go to the Start->Settings->Network Cards (Or Wi-Fi for some OSs)->Network Adapters tab
My Network card connects to:
set "The Internet"
(This will make your Wifi choose the "Direct Internet" connection, with the proxy you specified, or without a proxy)
4. On your PC, Open the Microsoft ActiveSync Window (Make Sure you have ActiveSync 4.5 or higher)
Click File->Connection Settings
This computer is connected to:
set "The Internet"
(This will make your ActiveSync inherit the "Direct Internet" connection, with the proxy you specified, or without a proxy)
That’s it, you're done!
The beauty is that Windows mobile knows it needs to use the "GPRS Internet", only when other connections are not present.
Now you don't have to mess with selecting a proxyless connection when connecting to a WiFi source, or using activesync
thank you very much for this, has helped very much.
i think this is a brilliant work around...... thank u soooooooo very much... i have been banging my head endlessly to try and find some solution to the problem i had.... and nothing could have been better than this....
:cheers:
Shlomki is there any way i can force MS Exchange to use AS when cradled? coz somehow it connects using GPRS even when cradled and connected to AS...
i'm happy to hear it helped you both!
phreaker18 said:
Shlomki is there any way i can force MS Exchange to use AS when cradled? coz somehow it connects using GPRS even when cradled and connected to AS...
Click to expand...
Click to collapse
if you followed the steps exactly as i described, exchange SHOULD use AS (your PC's internet connection). that's how its working for me right now.
when cradled and connected to AS, did you try browsing to a website to see which connection it tries to use? try to use PIE and see if it tries to connect to the GPRS or the PC's internet connection.
if it uses GPRS also, there might be a problem with your settings..
Repeat stages 1 & 4, they are critical for that matter.
Try stage 1 without entering a proxy server. just uncheck the proxy settings and check "This network connects to the internet".
Shlomki do u think i should uncheck enable advanced networking in settings--> connections-->USB to PC....?? do u think that maybe the problem creator?
shlomki said:
2. Under "Programs that… private network should connect using"
Click New to create a new connection:
Name for settings: GPRS Internet
Modem: Click New, and follow the wizard to add your GPRS access point.
Proxy Settings:
This network connects to the internet [Check]
This network uses a proxy [Uncheck, or Check and fill in your GPRS proxy settings]
Click to expand...
Click to collapse
when i complete step 2 [without checking proxy settings] and go back to see if this connects to the internet is checked or not it is always unchecked even though i check it some seconds more... am i doing something wrong here?? i dont think my GPRS connection uses any proxy settings...
phreaker18 said:
when i complete step 2 [without checking proxy settings] and go back to see if this connects to the internet is checked or not it is always unchecked even though i check it some seconds more... am i doing something wrong here?? i dont think my GPRS connection uses any proxy settings...
Click to expand...
Click to collapse
yes, it happens to me also. i think thats the way they intended it to be.
when you use a proxy with the work network, it doesnt uncheck the internet option.
are you using a proxy at all?
no i dont use a proxy..... i connect to the internet using a cable modem... n between the cable modem and the PC is my netgear WiFi router...
then why did you follow a post that's inteded for proxy connections
just select your proxyless gprs settings as your internet connection, and set active sync (on the pc) and network cards (on the ppc) to use "the internet".
im sorry if i didnt make myself clear.... i had proxies... since ur method didnt work i changed the whole setup on my PC and now i dont use a proxy...
but ur post was very informative nonetheless..
thank u again
shlomki said:
Okay, this has been bugging me for a long time, so I decided to solve this by myself once and for all.
Situation:
1. GPRS requires a proxy connection
2. WiFi and ActiveSync (A.S. on PC when connecting to an Exchange Server) "inherit" the same GPRS proxy settings, and are unable to connect to that proxy server, which make them both unusable.
So, naturally, I configured "The Internet" connection to use the GPRS access point and the GPRS proxy,
And "My Work Network" to be an internet connection WITHOUT a proxy.
But for some reason, that doesn't work.
The connections tab doesn't let "My Work Network" to be a "proxyless" internet connection.
I tried many configurations, trying to fool the wifi connection, until I got to a final solution that works.
The wifi knows to pick the connection without the proxy, so does the activesync, and so does the default GPRS connection, when no other connection is present, automatically!
So, the solution is this:
1. Go to the Start->Settings->Connections->Advanced tab->Select networks
Under "Programs that… Internet should connect using"
Click New to create a new connection:
Name for settings: Direct Internet
Modem: Leave Blank
Proxy Settings:
This network connects to the internet [Check]
This network uses a proxy [Uncheck, or Check and fill in your home proxy settings]
Click OK.
2. Under "Programs that… private network should connect using"
Click New to create a new connection:
Name for settings: GPRS Internet
Modem: Click New, and follow the wizard to add your GPRS access point.
Proxy Settings:
This network connects to the internet [Check]
This network uses a proxy [Uncheck, or Check and fill in your GPRS proxy settings]
Click OK until all windows are closed.
3. Now we need to get WiFi and AS to use the "Direct Internet" we created.
Go to the Start->Settings->Network Cards (Or Wi-Fi for some OSs)->Network Adapters tab
My Network card connects to:
set "The Internet"
(This will make your Wifi choose the "Direct Internet" connection, with the proxy you specified, or without a proxy)
4. On your PC, Open the Microsoft ActiveSync Window (Make Sure you have ActiveSync 4.5 or higher)
Click File->Connection Settings
This computer is connected to:
set "The Internet"
(This will make your ActiveSync inherit the "Direct Internet" connection, with the proxy you specified, or without a proxy)
That’s it, you're done!
The beauty is that Windows mobile knows it needs to use the "GPRS Internet", only when other connections are not present.
Now you don't have to mess with selecting a proxyless connection when connecting to a WiFi source, or using activesync
Click to expand...
Click to collapse
Thank you so much for this work around. You don't know how long I have been fighting this problem. What an elegant solution!
I think that I might try to abuse this to let other porgrams connect using T-mo GPRS since it seems that only web works when the Proxy is on, and other things work when its not.
woah
shlomki your the man!!!!
wahhhh
stumbled said:
shlomki your the man!!!!
Click to expand...
Click to collapse
ei shlomki, i use ur configuration for two days, after that I can't connect to my wifi router anymore
what will i do?????
stumbled said:
ei shlomki, i use ur configuration for two days, after that I can't connect to my wifi router anymore
what will i do?????
Click to expand...
Click to collapse
are you using wm6?
wm6 roms have a known issue with connecting to some secured networks.
try to set your router to allow unsecured connections and reconfigure your wifi settings in your ppc.
if it connects fine, the problem is with the wifi drivers.
shlomki said:
are you using wm6?
wm6 roms have a known issue with connecting to some secured networks.
try to set your router to allow unsecured connections and reconfigure your wifi settings in your ppc.
if it connects fine, the problem is with the wifi drivers.
Click to expand...
Click to collapse
im using WM5 in my Xda IIs blueangel...
what will i do?
stumbled said:
im using WM5 in my Xda IIs blueangel...
what will i do?
Click to expand...
Click to collapse
i don't know, sorry.
but it has nothing to do with proxy settings.
go to the blueangel forum in xda-developers and ask for help...
good luck
Hi Shlomki.
Followed the instructions when trying to connect with explorer it says cannot connect with these settings after further investagation for some reason the this connection connets to the internet check box won´t stick on the new connection we made or on work connection every time i go back to check it it´s unchecked again any ideas thanks
Dave
pftg4 said:
Hi Shlomki.
Followed the instructions when trying to connect with explorer it says cannot connect with these settings after further investagation for some reason the this connection connets to the internet check box won´t stick on the new connection we made or on work connection every time i go back to check it it´s unchecked again any ideas thanks
Dave
Click to expand...
Click to collapse
read the manual again, from start to finish, and do not skip a word.
if you're not using a proxy in your "Work Network Settings", this manual is not for you.
My wife uses her T-Mobile MDA (Wizard) to sync with her computer at at work. She also uses a proxy method to access the internet (on the go). Her job uses proxy settings and when she connects, it overwrites the proxy settings that she uses to access the internet when she's not connected to the computer. So basically, we have to put the proxy and modem settings in everytime she disconnects from active stink. Didn't have this problem until her job changed buildings and internet settings.
Is there any way to keep the settings from being overwritten? I've tried adding a second set of proxy settings with the same info having both the work proxy and the T-Mobile proxy. But what ever settings the phone is on, the work proxy will overwrite them with it's own. My wife uses her MDA to sync with her computer at at work. Her job uses proxy settings and when she connects, it overwrites the proxy settings that she uses to access the internet when she's not connected to the computer. So basically, we have to put the proxy and modem settings in everytime she disconnects from active stink. Didn't have this problem until her job changed buildings and internet settings.
Is there any way to keep the settings from being overwritten? "Allow wireless connection on device when connected to the desktop" is not checked. Checked that, and it still overwrites the settings. Very frustrating! How do you manage multiple proxy settings?