Hello!
I own a HTC x7500 and use BT headsets.
I'me getting nuts about this Cyberon Voice Dialer since everytime my BT connects the PPC the Voice Dialer starts and sometimes even starts a call.
At work, I have my PPC on my desk and everytime I reach the desk it starts, since I have my BT in my pocket.
Do you have the same problem? How can I solve this?
Thanks in advance!
Related
I've got a problem with Dopod 818 Pro's voice command software.
The software that is use is Cyberon VC 1.6, which is different from Jamin's Voice Speed Dial 1.1
Using Jamin's Voice Speed Dial 1.1 (I've flashed Jamin's rom), I can use bluetooth headset button to activate and dial very successfully every time.
However, when using Dopod's software (Cyberon VC 1.6), I can only activate the voice command once using my bluetooth headset's button. After that I cannot use it anymore and have to reboot the Dopod in order to make it work again. I noticed that after the headset is turned on, it never turns off again using this software.
I'm using a SC HBH-662, 818 Pro AKU2 WWE.
Do anyone experiences this problem? Is it a problem with my Headset instead of a software problem. (I'd need to consider replacing my bluetooth headset). If everyone is experiencing this problem with Dopod, then I think it is probably a software problem, or there are any registry setting that I can use to fix it?
I have noticed the same problem, though not everytime. It seems that if you use the software to dial a phone number, and then end the call, the headset shuts off and may or may not work again with voicecommand.
Anyway, yes, it's weird. I'm using a SE bluetooth headset as well, but I think it's software related.
Anyone not using Sony Ericsson bluetooth headset having the same problem? If yes, I think I'll just downgrade it back to imate rom.
Same Here!! I just loaded the new Dopod ROM and selected the few files from Ext ROM that I wanted and noticed that Cyberon Voice Commander worked once with the bluetooth headset (nxZen) then refused to work after that. Hopefully some genius here can help figure this out. Cyberon's VC seems really good, just need it to work over bluetooth.
voyager
Jabra headset same problem here.
AX2 and Plantronics Voyager same issue. I think it is similiar to the issue people are having with MS Voice Command on the Wizard using the Reg hack to redirect the BT Headset button to activate VC
I'm having the EXACT same problem, with the same headset (hbh662). Interestingly enough, I installed MS Voice Command side-by-side with Voice Commander. Once you activate Voice Commander the first time (and it makes the audio gateway connection to the BT headset), you can use MS Voice Command to issue commands through the headset. The problem is that it seems to only be able to do this once, and then you have to reset. The other thing I've noticed is that all audio is rerouted through the headset; if your phone rings while the BT gateway is active, you will only hear it in the headset (but you get to hear Voice Command anounce the caller). Ah well, at least it works for about 10 minutes per reset. :?
I have exactly the same problem with you guys with my SE HBH-610a and i.Tech Clip R35, and some other SE and i.Tech models which I have also tried. Can only activate once, and will not work again until a soft-reset. This has been like that since the shipped ROM, and the new ROM didn't fix this problem.
Voice command over BT on the i-Mate AKU2 rom works great though, and works 100% of the time!! Though both from same company Cyberon, the one on Dopod is VOICE COMMANDER, and the one on Imate is VOICE SPEED DIAL.
I have tried un-installing Voice Commander from my Dopod and installing Voice Speed Dial (from hack in this forum), but didn't get voicedialling over BT to work this way on the Dopod. Sigh!!
Has anyone contacted Dopod on this matter? If I-mate can implement Voicedialling over BT correctly, I don't see why Dopod can't!! I will write to Dopod. Can't imagine calling their hotline again...the last time I called, I had to wait at least 50mins before my call was answered.
Peter
Still no solution for this?
Still no solution for this issue? Isnt there a way to port/convert Project VCABT to the Prophet?
That would be more than great"!
I have the same problem plus it does not recognize my voice command. Alway dials a wrong person. :evil:
Any progress?
Dear Friends,
Has anyone had any progress with this issue? 3-rd party software? Maybe some bluetooth stack patches.
Please, if anyone has any valuable information to share, please do.
With warmest regards...
there is a major problem with the ROM
Until a new one is produced the BT will be stuffed
I am encountering a problem where after some time (do not know how long exactly) my BT headset seems not to synchronize with my TyTN. So when an incoming call arrives I am unable to answer it using the BT headset. Also, when I try to use Voice dialing it efuses to use my BT headset.
Only when I do a soft reset it works.
any ideas?
I have the same problem with a SonyEricsson HBH-610A.
Some times the bluetooth stops it self and I have to activate it agan.
Today when I tried to install the headset again, it searched forever and then I got the message, "Problem with Internal Bluetooth Hardware" and a OK button??
Only when I do a soft reset it saves the problem.
It actually drives me nuts, because I want to answer calles when the TyTN is in its holster.
I am using a Plantronics 655 with my TyTN running VC 1.5 with the common registry hack and have similar problems but not exactly the same. I want to be able to initiate voice dialing via the headset but when VC repeats the command it comes through the phone speaker and not the headset which also means my confirmation of the command has to be through the phone rather than the headset. Also, when a call comes in my TyTN speaks the name and number of the calling party through the telephone speaker but only beeps in my headset. To me it should be speaking to me through the headset.
I'm trying to get down to the bottom of this issue so it can be resolved through coordinated pressure on the responsible party(s).
Any help I receive will go to help all BT users of VC on the TyTN.
I am using a Plantronics 655 with my TyTN running VC 1.5 with the common registry hack and have similar problems but not exactly the same. I want to be able to initiate voice dialing via the headset but when VC repeats the command it comes through the phone speaker and not the headset which also means my confirmation of the command has to be through the phone rather than the headset. Also, when a call comes in my TyTN speaks the name and number of the calling party through the telephone speaker but only beeps in my headset. To me it should be speaking to me through the headset.
I'm trying to get down to the bottom of this issue so it can be resolved through coordinated pressure on the responsible party(s).
Any help I receive will go to help all BT users of VC on the TyTN.
Hi, I've read some post on BT and alternative Bluetooth drivers, but I don't understand if something can help me. Here is my problem:
I have an SPV M500 with latest Italian ROM. Then I have a Bluetooth handsfree car kit (Parrot Evolution). I have installed VITO voice dialer on my SPV, and assigned an hardware button to initiate voice recognition for calling.
When in car, with SPV and CAR Kit connected via BT, If I press the PARROT button for Initiate call, nothing happens (I also have an SPV C550 and it works).
So I have to press the assigned button on the SPV, but since it is quite far from my mouth, recognition always fails. With the SPV C550 I thing that my voice is heard from PARROT microphone, and it pass the voice to the phone via BT.
Is there a way to have my M500 working like the C550 ??
I think that any BT headset has the same problem (starting a voice call via headset button) so if anyone solved it I will be happiest man on heart !
Maybe simply an alternative to VITO voice dialer ? Someone tried Microsoft Voice command 1.6 ?
Thank You !
Sergio
I think it is a good thing for the Magician FAQ.
Question:
How to start my Voice Dialer Software from Bluetooth Handsfree button?
Answer:
1. Install your Voice Dialer Software. For example Cyberion Voice Dialer.
2. Install Project VCABT.
3. Enjoy!
I installed Cyberon Voice Speed Dial on my Omnia, but not CAN initiate voice call by bluetooth. I have to trigger the application on the handset screen for a shortcut and then the call is transferred to the headset. The strange thing is that if the call comes in, that is, upon receipt of the call, I usually attend the headset. However I noticed that when you release 'button on the bluetooth headset a little more length, something like 01 seconds, fires the standard dial pad. So if you drive a bluetooth program on PPC, I think is missing only the direct action triggered by the program for bluetooth voice dialing (Cyberon), that is, assign to the bluetooth function to activate the program Cyberon Speed Voice Dial. However, if the key bluetooth is already pressing the dial pad Samsung's standard, and opens the microphone bluetooth, what is missing in my understanding, it would redirect (change) the action of the button the program you want.Se PC, I would say that would be only a matter of changing the shortcut target .. but if in the PPC do not know how .. someone help me please?
Hi Aureo,
You try to install JETware Hands-Free Extension v1.31, under menu>advance config>tick on voice dial, tqvm
Thanks, I did this, but the "voice dialing" is not enabled on my device. Displays a message (No voice dialing ...). I do not know what to do, was my good old HTC Diamond that worked all right .. but the screen I8000 is wonderful, so I insist.
Greeting everyone, I hope that anyone can help me.
I'm from México have a Treo Pro, I recently bought an iLuv i222 bluetooth headset. I can listen to music just fine and the controls for it work perfectly. I can answer calls and dial the last number with the headset call button. The problem is that when I press it for 2 seconds in order to use the voice dialing nothing happens on my phone. I installed the speed dialing program as it didn't have one. If I activate it from the phone it works but when I try using it with the BT headset nothing happens, I only hear a beep but the voice dialing screen doesn't appear on my phone. I hope that anyone can help me.
what you need to do is enable voice command. i have wm 6.5, so i goto settings personal, voice command. i dont know what version you have, but if you look around in the settings menu it should be there.
cheers
Thanks for replying. The problem is that aparently the Mexico version of the Treo Pro doesn't come with Ms Vocie command. Do you know if there is any ROM of it?