well after much reassurance that it was pretty foolproof...my advantage appears bricked! i download olipros athenaunlocker.zip and extracted the exe file. followed all the steps and directions, the first part went flawlessly, flash spl without a hitch, then it came back to the second step, i went to unlock the radio, advantage was in a white screen with loading..... on it. and i get an error message that there is no connection to the pda...would i like to try reconnecting.... it would not reconnect for anything, for one activesync was now not connected, and i am 100% sure it was when i clicked step 2 to unlock the radio. had to pull battery on advantage to get it shut down, no buttons would work. now i hit power button and the lights turn green, but nothing further. The athena unlocker program is waiting at step 3 on my computer, but i cannot get my advantage to boot up at all, so i cant get a valid connection to either restart the process, or continue with step 3...please help! I consider myself very computer literate, just not specifically with cell phones.
tried hard reset
i tried a hard reset, and it came up with the rgb lines, and then it asked me if i wished to do the hard reset, which i said yes, then it asked to format the microdrive, and i said yes. It then said to hit the power button to reboot the machine, i tried and it just rebooted with black screen and the green light on the jog stick.......need some advice on what to do next...please help
sorry for so many replys but i just wanna give all the possible information...i think i got into the bootloader, but i have no idea, i pushed reset, camera and comm manager and got the rgb lines, and it says this
Athe100
IPL-v2.02
Athe100
SPL-v1.20.Olipro
Thats what I got, when i plug in usb connection it changes text at the bottom from serial to usb, and then back to serial when i unplug the usb cable, but i cannot get an activesync connection.....please advice as to if I should restart the athena unlocker, or what I should do now that im at this screen.
touchlasvegas said:
sorry for so many replys but i just wanna give all the possible information...i think i got into the bootloader, but i have no idea, i pushed reset, camera and comm manager and got the rgb lines, and it says this
Athe100
IPL-v2.02
Athe100
SPL-v1.20.Olipro
Thats what I got, when i plug in usb connection it changes text at the bottom from serial to usb, and then back to serial when i unplug the usb cable, but i cannot get an activesync connection.....please advice as to if I should restart the athena unlocker, or what I should do now that im at this screen.
Click to expand...
Click to collapse
Looks like you have already unlocked. I can see Olipro's name your your screen. This mean you device is still okay. Once you're in the bootloader mode, I believe the next thing you have to do is simply connect the usb cable and run the Rom Update Utility on the desktop. That's it.
if the status changes to usb on connection then you should be fine. connect the handset in bootloader mode and wait a few seconds, then run pk's black rom. because your spl has evidently been pached you should have no problems unbricking your phone. let us know how it goes, and don't panic!
Thanks for the reply eaglesteve (edit and Leoni)...now just to be sure, currently, my athena unlocker program ( 3 part ) is resting still on waiting for the 3rd part, flashing the radio. now step 2, which was unlock radio gave me the error, so do i just continue with part 3 flash radio, or are you saying that it appears that part is done? Or should i just start with PK's rom next? as i type im still downloading pk's dual rom right now
touchlasvegas said:
Thanks for the reply eaglesteve (edit and Leoni)...now just to be sure, currently, my athena unlocker program ( 3 part ) is resting still on waiting for the 3rd part, flashing the radio. now step 2, which was unlock radio gave me the error, so do i just continue with part 3 flash radio, or are you saying that it appears that part is done? Or should i just start with PK's rom next? as i type im still downloading pk's dual rom right now
Click to expand...
Click to collapse
the spl is patched, you're just not unlocked. if unlocking is not a concern then you should be ok just installing black touch. the problem you experienced is not uncommon and should you choose to run the unlocker again to finish the unlock fully you shouldnt have any problems. it might be wise to do this at some point just to make sure there are no problems with your radio.
edit - make sure that there is no memory card inserted in your device, this has been rumoured to cause issues when flashing. the same thing happened to me as happened to you, but since your device is now hard spl it is almost unbrickable, so fear not.
completed download of pk's rom, just a couple questions Bootloader mode is when you see olipros name and spl version with rgb lines right? In the zip file I have 4 exe files, enterbootloader, rapitool, romupdateutility, and ruugetinfo. Is there an order to running them? I would imagine they are all files to be ran from your PC, and not the advantage right? Just wanna get the steps right because i dont see any directions as far as completing the flash to pk's rom
touchlasvegas said:
Thanks for the reply eaglesteve (edit and Leoni)...now just to be sure, currently, my athena unlocker program ( 3 part ) is resting still on waiting for the 3rd part, flashing the radio. now step 2, which was unlock radio gave me the error, so do i just continue with part 3 flash radio, or are you saying that it appears that part is done? Or should i just start with PK's rom next? as i type im still downloading pk's dual rom right now
Click to expand...
Click to collapse
I seem to recall that Olipro does not affect the radio ROM, and that if you see his signature on the bootloader, then you're fine. The radio upgrade is separately done - you can do it after the PK ROM flashing. If you're going for to flash a radio, you can download the files from here:
http://forum.xda-developers.com/showthread.php?t=319993
Flashing the radio follows the same step. ie. get into bootloader, connect the usb, then run the RUU (RomUpdateUtility) on the PC.
run the rom update utility. everything else is initiated by that. and yes, make sure your device has the tri colour screen - red green blue - and says usb. you'll be fine my friend.
leoni1980 said:
the spl is patched, you're just not unlocked..
Click to expand...
Click to collapse
I think Leoni means it is not SIM unlocked. You don't need to be sim unlocked to safely flash a new ROM and radio, I believe.
Ok, im just gonna not worry about the radio portion, if you say it can be done later. So I still have my advantage at the rgb screen with olipros name and spl version. it says usb because its connected to my pc, whats the next step? in particular which exe should I run, i have 4 total in the rom zip file.
Well, I know that I purchased it off ebay, and it was advertised as factory unlocked...that means sim unlocked right?
touchlasvegas said:
Ok, im just gonna not worry about the radio portion, if you say it can be done later. So I still have my advantage at the rgb screen with olipros name and spl version. it says usb because its connected to my pc, whats the next step? in particular which exe should I run, i have 4 total in the rom zip file.
Click to expand...
Click to collapse
Run the rom update utility on your PC.
touchlasvegas said:
Well, I know that I purchased it off ebay, and it was advertised as factory unlocked...that means sim unlocked right?
Click to expand...
Click to collapse
Yes. It does.
touchlasvegas said:
Ok, im just gonna not worry about the radio portion, if you say it can be done later. So I still have my advantage at the rgb screen with olipros name and spl version. it says usb because its connected to my pc, whats the next step? in particular which exe should I run, i have 4 total in the rom zip file.
Click to expand...
Click to collapse
see my -edited - previous post!
yaaay...I think...i ran the tom update utility, and it loaded PK's rom! now i am going thru the automatic configuration once you first boot...i will let you all know once i get it more setup
touchlasvegas said:
yaaay...I think...i ran the tom update utility, and it loaded PK's rom! now i am going thru the automatic configuration once you first boot...i will let you all know once i get it more setup
Click to expand...
Click to collapse
Congratulations. I'm sure you're home safe now.
ok, so far i give pks rom a+++, its great, much faster and responsive. I love the addons as well. Snapvue is cool, but i want an rss reader on my homescreen, so i use the htc home, just like on my touch dual What size do i have to make my pictures to get them to show up full screen on 96 dpi? i hate having my images tiled
Congrats touchlasvegas!
Related
I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?
Zulu137 said:
I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?
Click to expand...
Click to collapse
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help
Asfarizal said:
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help
Click to expand...
Click to collapse
Manage to solve the problem ...thanks WIKI !!
Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus
Then Flash to any ROM you want !!
Thanks .... But
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Thank You
I will follow the instructions you gave and try to get it going this weekend.
Thank you so much for your time
Zulu137 said:
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.
Click to expand...
Click to collapse
Looks like you've got a lot of reading to do, and a problem to sort out. Firstly a couple of answers...
Schaps is a Rom Cooking guru (makes custom versions of WM5, WM6 etc). When you get your phone sorted out I'd recommend trying one of his roms.
Hard SPL. The SPL is part of the bootloader which effectively dictates how a rom is flashed and what roms can be flashed. HardSPL is a custom version of this which allows you to flash any rom from any carrier. It also protects against a bad flash in many cases. It is recommended before you try flashing any new roms or radio roms. Use Hard-SPL-V7 at the bottom of the first post here.
The Rom upgrading software is contained in any of the cooked or carrier supplied roms. It is normally a .zip file which cotains 2 files: xxxxxRUU.exe and RUU_signed.nbh. You run the .exe file from your PC when connected to your phone via USB. More details of how to do this are in MrVanx's guides. Also other resources here.
Now to try to sort your phone out...
What is displayed on your screen when in bootloader mode? It should be something like this:
HERM200
IPL-1.04
HERM200
SPL-2.10.Olipro (This is HardSPL V7)
If you don't have an Olipro SPL then you need to get HardSPL onto your phone. If you haven't done any upgrading and have had the phone from new then I guess you don't have hardSPL.
Now you need to fix your USB Malfunctioning problem. I can't help too much here except to suggest trying a different cable, different USB port or different PC. Also, if you are running Vista try an XP maxhine. When you connect to the PC does your phone show Serial or USB on the screen? If you can't get a USB connection, all is not lost - you can re-flash your rom using an SD card, method here.
There is a thread about un-bricking phones which may help.
There are various diagnostic tools (which can also screw your phone if used incorrectly). The favourite of these is MTTY but you need a USB connection to use this.
If your phone is in warranty I'd recommend getting your supplier to sort it out, but if not I'd try to re-flash an ORIGINAL supplier rom (Cingular I guess). You can get links to the official supplier roms here.
I think (might be wrong) that sometimes when stuck in bootloader you need to flash an official rom, not a cooked one to recover your phone - then you can run HardSPL and then flash cooked roms again.
Cingular 8525 stuck in bootloader
Thanks for the reply ... lots of great input.
Now to answer some of your questions.
1) When I power up the phone (only pushing the power button ) it goes straight into the bootloader screen without pushing any other buttons, and it displays
HERM100
IPL-1.01
HERM100
SPL-1.06
Then at the bottom in the white bar it says "Serial"
The only way that i have found to power it down again is to remove the battery, there is no response from any single buttons after it is in bootloader
the soft reset and hard reset work but it just goes right back to the bootloader screen after.
2) The USB malfunction. This only started after the phone "crashed" and before that it worked great ... well i only used it to sync up to my work pc for the contacts and to get pictures onto my hard drive.
all the PC's that i use are running XP. I have tried my home PC and my Laptop
and the work PC and all of them have their own cables and they all say the same thing ... "the USB device is malfunctioning"
I am sure that when i get the phone going again the USB will start to function again.
3) Phone warranty ... I bought the phone off e-bay from a store in new york about 10 months ago as a "new unlocked cingular 8525" it was new and unlocked, but i have no idea how they unlocked it. I would assume that there would be no warranty now and in any case i live in Canada and would have to ship it down to the states to an AT&T repair center and that sounds like a nightmare to me with the customs and so on.
I will give you a little more background on the problem. the phone worked like a charm without any problems at all for the 10 months that i had it, then the morning of the crash the phones alarm did not go off in the morning and i was almost late for work ... i did not pay it any further attention untill at 3:26pm
that afternoon the alarm went off ??????? (it was set for 6:05am) so i checked the main clock time, it was right. I then checked the alarm time, it was right ??? So i figured that something must have just got confused, so i powered down the phone with the power button to just restart it and while it was powered down i removed the battery to take the oportunity to to clean all those fuzzies and dust that collect in the battery compartment out and put it all together and powered it up again (just by pushing the power button) and this wierd red, green, blue and white screen appeared and that is all that i have seen since ???
I hope that answers your questions and i will start going through the links that you sent and get to reading ... will there be a pop quiz ... lol
Thanks again for your time and i very much appreciate all the time that all of you have spent on me and my phone ..... I know that you all just feel bad for me because i now have to use a Motorolla V551 ... lol
Great Work
ultramag69 said:
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Click to expand...
Click to collapse
Thanks a lot man & great work i unbricked my Herm100 with method u mention above thanks a lot & great job keep it up
I also have this problem.
I d/l Hard-SPL-V7
and when i run RUUWrapper.exe
I get an error saying the application failed to initialize properly (0xc0000135)
What's going on?
How do i fix this?
this happened when i was trying to unlock the phone.
Thanks
need help
when i switch on my orange herm100 it shows On the bootloader screen is displayed:
HERM100
I PL-1.01
HERM100
SPL-1.40.01ipro
history : i buy unlocked orange phone
fewdays back i found no imei ,
yesterday i try to flash by micro sd but in gsm stage its gets hang no progress after extrom stage
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM - (NO ACTION)
OS -
i tryed several time no action, i cant connect by mini usb.
PLEASE help me
tell me which it the right rom to chose? step by step procedure..
how to rectify imei?
thanks and regards
kirtibas
kirtibas, sorry it took so long to reply, 1st thing I'd do is upgrade to SPL 2.10 olipro. This is safer to use than others. then I'd suggest reflashing a stock rom to see if that works. After stock rom works then use a cooked rom as your heart desires... Cheers...
im getting a touch hd from taiwan. and i just read that it comes in chinese only
is there any rom to make it english? or change the os language to english
and what is the country code for it?
if there isnt. will i have to use hard spl?
and i read the instructions for it but im kinda lost
please help
Thanks in advance
Allmost all ROMS are in english. There are ways you can flash them without using hard spl.
EpiphanyNL said:
Allmost all ROMS are in english. There are ways you can flash them without using hard spl.
Click to expand...
Click to collapse
i checked "http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe"
and im not sure which one to download
im not really sure which is the country code for taiwan. any ideas?
there are ways to flash without using hard spl?
can you please tell me how?
Read this for flashing without Hard spl: http://forum.xda-developers.com/showthread.php?t=462347
Why would you want the country code for taiwan? You dont need it when flashing another ROM.
EpiphanyNL said:
Read this for flashing without Hard spl: http://forum.xda-developers.com/showthread.php?t=462347
Why would you want the country code for taiwan? You dont need it when flashing another ROM.
Click to expand...
Click to collapse
i read that i need to know so i know which rom to download?
i think. i read it here " http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1"
so im going crazy looking for a rom that i could use.
do you know where i can download one so i can make my language WWE instead of chinese.?
I'm using this ROM atm: http://www.laurentius26.net/
You can find enough ROMS in this thread btw, read carefully and you will find them
EpiphanyNL said:
I'm using this ROM atm: http://www.laurentius26.net/
You can find enough ROMS in this thread btw, read carefully and you will find them
Click to expand...
Click to collapse
thanks but one question?
which is the easiest way to flash a rom?
using Hard SPL, Soft SPL, or USPL?
im really lost on that..
and which one should i use?
Cant really help you there, I use hard SPL, but I guess it's just what your preference is in that.
EpiphanyNL said:
Cant really help you there, I use hard SPL, but I guess it's just what your preference is in that.
Click to expand...
Click to collapse
oh really?
hardspl is only for blac100 right?
but i read that now they have like blac120?
and im not sure which one im gunna be getting in the box.
oh. when i change the os language. do i have to download one with the same country code?
i read in another place that if you dont have the same. then. it wont work?
or with hardspl and uspl i dont need to have the same country code
anyone? im kind of a newbie
i need help please
im going to be getting my touch hd soon in chinese
and i need to change it to english
help
thank you!
kevin6192 said:
anyone? im kind of a newbie
i need help please
im going to be getting my touch hd soon in chinese
and i need to change it to english
help
thank you!
Click to expand...
Click to collapse
Its not very hard to be honest
You must flash HardSPL first to be able to flash any rom and hardspl will work for blac100 and blac120
More info and instruction about HardSPL
Tips about flashing the rom
Use fully charged device
* Switch off your device by holding the Power button untill a menu pops up
* Go to bootloader by holding Volume down + Power button at the same time
* Connect your device to your PC
* Start BlackStoneCustomRUU.exe and follow the onscreen instruction's
There are countless ROM's out there and everyone has different tastes so there is no point asking any questions on which is better etc etc etc.
I am curretnly using Duttys 2.3 rom and would recommned it or Laurentius26 V9.0
Hope this helps!
Laurentius26
I got mine from hong Kong when I was there in Feb, it was in chinese too. then I went to the wiki page, downloaded the Hard SPL, once that was done I just picked any ROM on the wiki page, I chose Dutty 1.7 at the time. copied the NBH file to the root of the SD card, made sure the name of the NBH file was BLACIMG.nbh and then used restarted the device with the key presses mentioned in the wiki and flashed it to english. MAKE sure you have at least 50% charge before you start.
the WWE versions are the english roms. I believe its mentioned in the wiki too.
Since then I've maybe flashed like 10 or more times and tried different roms. it doesn't matter which rom you pick. its a matter of personal preference. just take the time to read the wiki in detail and you'll be fine.
if you are getting a retail touch HD it will come with an 8GB SDHC micro SD and the usual accessories.
as of now I'm on dutty's 2.3
alvinswim said:
I got mine from hong Kong when I was there in Feb, it was in chinese too. then I went to the wiki page, downloaded the Hard SPL, once that was done I just picked any ROM on the wiki page, I chose Dutty 1.7 at the time. copied the NBH file to the root of the SD card, made sure the name of the NBH file was BLACIMG.nbh and then used restarted the device with the key presses mentioned in the wiki and flashed it to english. MAKE sure you have at least 50% charge before you start.
the WWE versions are the english roms. I believe its mentioned in the wiki too.
Since then I've maybe flashed like 10 or more times and tried different roms. it doesn't matter which rom you pick. its a matter of personal preference. just take the time to read the wiki in detail and you'll be fine.
if you are getting a retail touch HD it will come with an 8GB SDHC micro SD and the usual accessories.
as of now I'm on dutty's 2.3
Click to expand...
Click to collapse
Fallen Spartan said:
Its not very hard to be honest
You must flash HardSPL first to be able to flash any rom and hardspl will work for blac100 and blac120
More info and instruction about HardSPL
Tips about flashing the rom
Use fully charged device
* Switch off your device by holding the Power button untill a menu pops up
* Go to bootloader by holding Volume down + Power button at the same time
* Connect your device to your PC
* Start BlackStoneCustomRUU.exe and follow the onscreen instruction's
There are countless ROM's out there and everyone has different tastes so there is no point asking any questions on which is better etc etc etc.
I am curretnly using Duttys 2.3 rom and would recommned it or Laurentius26 V9.0
Hope this helps!
Laurentius26
Click to expand...
Click to collapse
im sorta confused on how to install Hardspl
i read the instructions..but im lost
do you think you guys can help me out?
like explain in an easier way?
sorry for the inconvenience
can i also use USPL?
kevin6192 said:
im sorta confused on how to install Hardspl
i read the instructions..but im lost
do you think you guys can help me out?
like explain in an easier way?
sorry for the inconvenience
can i also use USPL?
Click to expand...
Click to collapse
Instructions
Download Hard-SPL package from attachment, extract to an empty folder.
Unsigned_HardSPL_for_Blackstone_OliNex.zip
You must Have Phone Sync'd with PC in Windows Mobile!!!
Run HardSPLWrapper_Blackstone.exe on PC,
make sure it's launched from a local drive (not through network drive, etc.).
if you are on vista, launching as Administrator is recommended,
Follow steps in the RUU
check device for prompts after PC shows loading bar
press Yes on phone if asked.
Some notes: When RUU says it will hard reset, do not worry, it is not going to do that. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
Device should go to a tricolour screen now that says 1.07.OliNex, the SSPL version, which is temporary.
In a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device.
SPL flashes, device automatically reboots, job done.
To confirm you got it installed,
go into bootloader mode (tricolour screen!) (Switch off your device by holding the Power button untill a menu pops up > Go to bootloader by holding Volume down + Power button at the same time)
verify the screen shows 1.14.OliNex, which is the Hard-SPL version.
I just got my Touch HD over the weekend and I used USPL so that I don't void the warranty:
http://forum.xda-developers.com/showthread.php?t=462347
However, you need to have XP. Tried it on Vista but not successful. Luckily I had an old XP laptop stuffed away somewhere
ionrage said:
I just got my Touch HD over the weekend and I used USPL so that I don't void the warranty:
http://forum.xda-developers.com/showthread.php?t=462347
However, you need to have XP. Tried it on Vista but not successful. Luckily I had an old XP laptop stuffed away somewhere
Click to expand...
Click to collapse
oh really?
when it says
"Execute blac_uspl.exe;" do i just find the file ont he computer and double click it? or do i have to like install it using the phone?
and " If everything goes well, your device will restart and SPL version label should read "1.14.USPL" indicating that USPL was loaded successfully."
once that is done then... am i done?
this next part is when i want to flash a rom right?
("You can then start RUU update to flash RUU_signed.nbh. Once RUU update is completed, device will restart using regular flashed SPL.
If you want to flash from SD card instead, make sure your SD card is not inserted when you enter the bootloader originally.
SPL will try to install it and would fail if blacimg.nbh is not signed by HTC. Insert the card after "USB" label comes up in SPL but before running USPL.
You can run "blac_uspl.exe ?" to get command line parameter help. Only 1 parameter is accepted and that is the name of an SPL file you want to load. You can load an MFG SPL or HSPL. USPL automatically takes care of allowing unsigned/cooked ROM flashing with any SPL you use.")
man. i dont have XP
thers no way on vista?
thanks for the inconvenience.
Fallen Spartan said:
Instructions
Download Hard-SPL package from attachment, extract to an empty folder.
Unsigned_HardSPL_for_Blackstone_OliNex.zip
You must Have Phone Sync'd with PC in Windows Mobile!!!
Run HardSPLWrapper_Blackstone.exe on PC,
make sure it's launched from a local drive (not through network drive, etc.).
if you are on vista, launching as Administrator is recommended,
Follow steps in the RUU
check device for prompts after PC shows loading bar
press Yes on phone if asked.
Some notes: When RUU says it will hard reset, do not worry, it is not going to do that. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
Device should go to a tricolour screen now that says 1.07.OliNex, the SSPL version, which is temporary.
In a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device.
SPL flashes, device automatically reboots, job done.
To confirm you got it installed,
go into bootloader mode (tricolour screen!) (Switch off your device by holding the Power button untill a menu pops up > Go to bootloader by holding Volume down + Power button at the same time)
verify the screen shows 1.14.OliNex, which is the Hard-SPL version.
Click to expand...
Click to collapse
do i have to have the phone connected to the computer before i run HardSPLWrapper_Blackstone.exe?
what does it mean when it says make sure it is launched from a local drive?
or a network drive?
where are the steps for the RUU?
sorry for all the questions!
kevin6192 said:
do i have to have the phone connected to the computer before i run HardSPLWrapper_Blackstone.exe?
what does it mean when it says make sure it is launched from a local drive?
or a network drive?
where are the steps for the RUU?
sorry for all the questions!
Click to expand...
Click to collapse
Yes, you need phone sync'd to pc using your usb cable before running HardSPLWrapper_Blackstone.exe?
What I mean by local drive is your C:/ drive or local disk and not by using other drives you may have i.e. G:/, H:/, J:/ etc
When you run HardSPLWrapper_Blackstone.exe a screen will appear on your pc and it will have these steps on it for you to follow. i.e. just follow these steps
Fallen Spartan said:
Yes, you need phone sync'd to pc using your usb cable before running HardSPLWrapper_Blackstone.exe?
What I mean by local drive is your C:/ drive or local disk and not by using other drives you may have i.e. G:/, H:/, J:/ etc
When you run HardSPLWrapper_Blackstone.exe a screen will appear on your pc and it will have these steps on it for you to follow. i.e. just follow these steps
Click to expand...
Click to collapse
okay so i have downloaded HardSPLWrapper_Blackstone.exe.
it says extract it so that means i cannot open it from the zip?
is it okay if it is in a folder in the C:/ drive when i launch it?
so first off. i connect the phone to the pc.
( do i put it in bootloader mode?)
what will show on the phone when i connect it?
and when i connect it. i just plug the usb in the phone and the computer and thats it?
then i launch HardSPLWrapper_Blackstone.exe
follow the steps..
then im done?
kevin6192 said:
okay so i have downloaded HardSPLWrapper_Blackstone.exe.
it says extract it so that means i cannot open it from the zip?
is it okay if it is in a folder in the C:/ drive when i launch it?
so first off. i connect the phone to the pc.
( do i put it in bootloader mode?)
what will show on the phone when i connect it?
and when i connect it. i just plug the usb in the phone and the computer and thats it?
then i launch HardSPLWrapper_Blackstone.exe
follow the steps..
then im done?
Click to expand...
Click to collapse
Yes you need to extract it from zip as it will not run from within zip folder
Personally I ran it just from the desktop, i.e. I put HardSPLWrapper_Blackstone.exe on my desktop
when you have your phone connected and in bootloader mode at the bottom on the screen it should say 'usb'.
then launch HardSPLWrapper_Blackstone.exe, follow steps, then your done.
As I said put phone back into bootloader mode afterwards and verify the screen shows 1.14.OliNex, which is the Hard-SPL version.
Long story short my phone worked fine for months. Went to a 1.56 Rom active sync stopped working. I have already tried everything associated with AS problem, everything. Went to get it repaired at HTC America in Houston, TX there gay and dont support T8285. I have tried flashing via memory card but I seem to be retarded doing it that way. Engineer said mini usb slot works fine, cooked rom may have corrupted AS. Customer service would not let him fix my phone because it was an "aussie version". I just want the phone to sync is that too much to ask? Anyway $100 bucks to anyone that can make it work paid via paypal immediately.
moved out of development
Personally I think your mad offering $100. I'm sure most people would have hepled you for free, including myself. I'm not after your money but offer my assistance.
Have you tried doing a hard reset? uninstalling activesync & reinstalling it?
Flashing different rom. If you can't flash through SD Card, have you tried flashing again via usb. You don't need phone sync'd
Put your phone into bootloader and then connect to pc via usb. At bottom of screen the text should change from 'serial' to 'usb'. Now flash phone by running rom (cooked or stock etc) you downloaded. Put .nbh and ruu file into same folder and then open ruu file and follow instructions.
I severely doubt cooked rom affected activesync.
EDIT
As bonesy said below, you'll need either USPL or HSPL to flash 1.56+ based rom.
Full tutorial or dummies guide to flashing 1.56+ based roms can be found in cRaCKwHoRe's guide. See my signature
Turn off your phone, Take out your memory card, Plug the miniUSB in then power on (Hold volume down press power holding volume down still) This will bring up a coloured screen. Run the ROM Wrapper package exe (BlackstoneRUUWrapper) This SHOULD now install the right ROM.
Please make sure you are using a 1.56 rom with the HSPL or i think it has problems with GFX.
When windows loads go to start>settings>connections>USBtoPC
this is on 6.5 rom not sure about 6.1 :/
Untick Enable faster data synchronizaion, I had to do all this on works computer to update a ROM god knows why but this was my fix.
ROM Should load as should activesync now.
Please let me know if this helps
Tried to post in ure original threads but mods were moving to trash each time BAH!
Thanks to both of you guys for your suggestions. I thought I was not a noob when it came to flashing roms but once I could not do it via usb I was a whole different story. Yeah I am offering the $100 just to get people to help. I know you get slammed if you ask a question so I figured I would make it worth someone's time. I am going right now to pick it up from the repair center so I will try during my lunch in about an hour.
Fallen Spartan said:
Personally I think your mad offering $100. I'm sure most people would have hepled you for free, including myself. I'm not after your money but offer my assistance.
Have you tried doing a hard reset? uninstalling activesync & reinstalling it?
Flashing different rom. If you can't flash through SD Card, have you tried flashing again via usb. You don't need phone sync'd
Put your phone into bootloader and then connect to pc via usb. At bottom of screen the text should change from 'serial' to 'usb'. Now flash phone by running rom (cooked or stock etc) you downloaded. Put .nbh and ruu file into same folder and then open ruu file and follow instructions.
I severely doubt cooked rom affected activesync.
Click to expand...
Click to collapse
I tried uninstalling and reinstalling active sync. Different cables, different computers, xp and vista, everything, checked usb enhanced, etc ,etc.
bonesy said:
Turn off your phone, Take out your memory card, Plug the miniUSB in then power on (Hold volume down press power holding volume down still) This will bring up a coloured screen. Run the ROM Wrapper package exe (BlackstoneRUUWrapper) This SHOULD now install the right ROM.
Please make sure you are using a 1.56 rom with the HSPL or i think it has problems with GFX.
When windows loads go to start>settings>connections>USBtoPC
this is on 6.5 rom not sure about 6.1 :/
Untick Enable faster data synchronizaion, I had to do all this on works computer to update a ROM god knows why but this was my fix.
ROM Should load as should activesync now.
Please let me know if this helps
Tried to post in ure original threads but mods were moving to trash each time BAH!
Click to expand...
Click to collapse
Thanks for breaking it down barney style for me. I will try this very soon. If it works my friend you got $100 smackers.
no worries, Glad to help (if it does lol)
bonesy said:
Turn off your phone, Take out your memory card, Plug the miniUSB in then power on (Hold volume down press power holding volume down still) This will bring up a coloured screen. Run the ROM Wrapper package exe (BlackstoneRUUWrapper) This SHOULD now install the right ROM.
Please make sure you are using a 1.56 rom with the HSPL or i think it has problems with GFX.
When windows loads go to start>settings>connections>USBtoPC
this is on 6.5 rom not sure about 6.1 :/
Untick Enable faster data synchronizaion, I had to do all this on works computer to update a ROM god knows why but this was my fix.
ROM Should load as should activesync now.
Please let me know if this helps
Tried to post in ure original threads but mods were moving to trash each time BAH!
Click to expand...
Click to collapse
So I got my phone and this is what it says.
BLAC120 32M
SPL-1.56.01Olinex
MicroP-Blackstone (LED) v6
and it's just red green blue and white no word on the bottom. Ran BlackstoneRUUWrapper with the nbh file that I wanted and it gave me a connection error. Now it says Seiral in the white.
Fallen Spartan said:
Personally I think your mad offering $100. I'm sure most people would have hepled you for free, including myself. I'm not after your money but offer my assistance.
Have you tried doing a hard reset? uninstalling activesync & reinstalling it?
Flashing different rom. If you can't flash through SD Card, have you tried flashing again via usb. You don't need phone sync'd
Put your phone into bootloader and then connect to pc via usb. At bottom of screen the text should change from 'serial' to 'usb'. Now flash phone by running rom (cooked or stock etc) you downloaded. Put .nbh and ruu file into same folder and then open ruu file and follow instructions.
I severely doubt cooked rom affected activesync.
EDIT
As bonesy said below, you'll need either USPL or HSPL to flash 1.56+ based rom.
Full tutorial or dummies guide to flashing 1.56+ based roms can be found in cRaCKwHoRe's guide. See my signature
Click to expand...
Click to collapse
Well I get it into bootloader no problem but then plug in the usb cable and nada, it says serial. So then I tried starting bootloader mode with the cabe and still nada, it does not even say serial. If I unplug it then it says serial. I have tried both ways to run the RUU Wrapper and I keep getting the usb conncetion error
serial?
Hi, please can you post a screen shot of where it says serial at boot screen?
stoolzo said:
Hi, please can you post a screen shot of where it says serial at boot screen?
Click to expand...
Click to collapse
I cant because I cant use my software that would do that since it wont sync to my computer.
snap shot
just take a snap shot with a webcam or digital camera if you have one.
stoolzo said:
just take a snap shot with a webcam or digital camera if you have one.
Click to expand...
Click to collapse
let me see if this comes thru ok.
turcomora said:
let me see if this comes thru ok.
Click to expand...
Click to collapse
Here yo go. This picture is with me having the device plugged in it charging fine. Then entering bootloader mode. If I unplug then it will say serial. If I dont plug in before then enter bootloader it will say serial still.
thanks
ok, that looks pretty normal,so to recap you fully powerdown the phone by taking the battery out, put the cable into both the phone and pc and the turn on holding volume down and it just sits there?, what happens when you press volume up at this point?
stoolzo said:
ok, that looks pretty normal,so to recap you fully powerdown the phone by taking the battery out, put the cable into both the phone and pc and the turn on holding volume down and it just sits there?, what happens when you press volume up at this point?
Click to expand...
Click to collapse
Only thing I was not doing was taking out the battery. Just tried that and still same screen. Nothing happens when I press the volume up button just stays there.
pc
do you have another pc to try this on to rule out an actual active sync problem?
stoolzo said:
do you have another pc to try this on to rule out an actual active sync problem?
Click to expand...
Click to collapse
Yeah I have been trying on my latop, home pc, and work pc and nothing same result. I have tried different usb cables, os, reinstalling, everything. Only thing I have not tried is flashing via sd card yet.
brick
its sounds like you have a corrupt spl, it is definately worth trying the sd card as it may allow you to activesync but it may then fallover when it reboots and goes into boot mode. This i where user viperbjk (see android dev thread) may be able to help as he has successfully managed to unbrick a phone.
I had this same problem but powering down and simply triggering the and spl reflash resolved it. your problem sounds different though.
Hey all,
Just a little background information:
- Hard SPL'd my phone to flash Dutty's cooked ROM.
- All of a sudden one day, the phone switched off. I tried to boot it up but it will freeze on the HTC loading screen where it displays the radio version, ROM version in red down the bottom - the phone would not go any further.
- My computer won't even recognise it when I plug in my USB.
Anyway, I figured I'd try to uninstall HSPL and start over again. I downloaded an official HTC ROM, tried to load into the bootloader and now I'm stuck.
The screen reads:
Upgrade ROM code error
Please try again
If I pull out the battery/SD card, it will load into this screen again.
What *I THINK* may be the issue is that I didn't use the original ROM SPECIFIC to my phone, i.e. WWE Asian ROM.
I've updated the ROM image on my SD card but I can't get into the original bootloader to start the uninstallation process again.
Help!
Ok, nice and calm, are you sure you can't get into bootloader mode?
Power off, sim and sd card out (just to be sure)
hold volume down, tap power, continue to hold volume down.
samsamuel said:
Ok, nice and calm, are you sure you can't get into bootloader mode?
Power off, sim and sd card out (just to be sure)
hold volume down, tap power, continue to hold volume down.
Click to expand...
Click to collapse
I can get into the bootloader just fine.
It will display the error message and I can't do anything.
OK, so if you can get to the 3 coloured screen, you can just flash HSPL (if it isn't still installed) and flash a new rom.
Boot to bootloader(3 coloured screen), connect to computer, run HSPL.exe
samsamuel said:
OK, so if you can get to the 3 coloured screen, you can just flash HSPL (if it isn't still installed) and flash a new rom.
Boot to bootloader(3 coloured screen), connect to computer, run HSPL.exe
Click to expand...
Click to collapse
My computer refuses to connect to the phone.
I'll plug in my USB cable, windows will make the connection sound but the phone won't load into Windows Explorer.
What does it say by the spl? 1.42.0000? or 1.42.HSPL?
Actually it doesnt matter, when you hear the connection sound, thats enough, Run HSPL.exe, and if its not already installed, it should install, if it is already installed it will say 'hspl requires 1.42.000' or something.
Either way, you can then go ahead and flash a new rom.
samsamuel said:
Actually it doesnt matter, when you hear the connection sound, thats enough, Run HSPL.exe, and if its not already installed, it should install, if it is already installed it will say 'hspl requires 1.42.000' or something.
Either way, you can then go ahead and flash a new rom.
Click to expand...
Click to collapse
No, it doesn't work.
When I run HSPL.exe, it says it can't find my phone.
I already have HSPL installed with a custom ROM.
The phone is stuffed whereby I couldn't get past the HTC logo screen - it just freezes there.
I tried uninstalling HSPL thinking this would solve my problem with no luck.
The phone boots into the bootloader with an error message that I can't seem to get around.
Ah ok, so you get the error message on the 3 coloured screen? If that is the case, then spl itself is corrupt.
I thought you got the error message when the phone tried to boot, my mistake.
Next to try then is to find the original rom that came on your phone, and flash it from sd card, and hopefully it will overwrite the spl. It must be the correct rom for your provider and region, though.
If that doesn't work, then i'm afraid all I can do is wish you best of luck.
samsamuel said:
It must be the correct rom for your provider and region, though.
Click to expand...
Click to collapse
I think this is where I went wrong.
I tried uninstalling HSPL with a ROM that wasn't from my region which is why I'm getting these errors.
Surely there's a way around this?
If you can find your original rom, there is a good chance you will be fine, OR you can probably try the goldcard route, however i'm not 100% so i wouldnt go handing over cash (goldcard isn't free) until you are sure.
Do you know what rom you are looking for?
samsamuel said:
If you can find your original rom, there is a good chance you will be fine, OR you can probably try the goldcard route, however i'm not 100% so i wouldnt go handing over cash (goldcard isn't free) until you are sure.
Do you know what rom you are looking for?
Click to expand...
Click to collapse
I'm sure my phone's original rom was the WWE Asian version from Hong Kong.
I've uploaded the ROM onto my SD card but I can't get the bootloader to load it.
As stated before, I used another ROM at first and then it crashed on me.
Everytime I start the bootloader, it won't let me load the Asian ROM from scratch.
It just displays the error with no way around it.
Hmm, ok, just a couple of last thoughts then i gotta go to bed.
1 - sd card formatted fat32
2 - some people have better luck with 2gb cards than with bigger ones.
3 - Was the phone bought direct unlocked from HTC or is there a chance its provider locked? (i.e are you REALLY SURE you have the right rom)
4 - RUU_Signed.nbh coppied to sd card and renamed leoimg.nbh
Gotta go, best of luck.
ok. u are getting error in bootloader? what exacly is the error message you are getting..
Hard Reset
I had a similar problem to this and a hard reset solved the problem. Did you try a hard reset? I think its press volume up and volume down and power simultaneously.
DownloadMaster said:
I had a similar problem to this and a hard reset solved the problem. Did you try a hard reset? I think its press volume up and volume down and power simultaneously.
Click to expand...
Click to collapse
Even that won't work!
Confirmed hard reset but pressing "Volume Up", then the screen blacks out immediately and nothing happens.
When I press the "power on" button, all I see is an exclamation mark for a second then a black screen.
I think the solution is for you to try flashing to HSPL again.
1. Boot to bootloader mode by pressing Vol down key and click the Power button. You should get the tri colour screen, and the word "Serial" on the bottom.
2. Plug in the USB cable to your PC. The word "Serial" should then change to "USB".
3. Run hspl.exe as administrator.
I did the same as you previously when I tried to load the SEA 1.66 ROM on my Hong Kong English phone, and recovered it by using the above steps. I had to run HSPL 3 times before it worked. The first 2 times, it would seem to work as I'd get the "We Hacked it!" message, but when I rebooted the phone to the bootloader, it still wasn't HSPL. Only on the 3rd try, did it successfully load HSPL to the bootloader.
-edit-
You can download the original Hong Kong CSL ROM from a link in this thread.
got to say, if in doubt - goldcard it!!!
what is your spl version now? 1.42.0000 or 1.42.hspl '?
only bootloader is never a problem with hspl installed.
only bootloader is no problem with original spl version as long as you have a compatible stock rom.
\I wonder whether the phone would connect to computer properly.
After plenty of reading around, I've finally fixed the issue!
It was the easiest of all fixes - all I had to do was to download the original factory ROM the phone came with (.exe file) and run the executable with the phone plugged in via USB.
Thanks to all those who have tried to help.
I decided it's best to open another topic, as the subject has changed and the other topic seems to have died more or less.
I have found out that the problem with my HD2 is that the radio is corrupted. However, I failed every time I tried flashing a new radio, even though I tried both USB and SD card methods.
Is there any way I can format the part of the memory where the radio is? I would also like to mention the fact that task29 failed too, as it never goes over 0%.
For anyone who doesn't know what my problem is: the device will not go further than a white screen of death when booting. I can get into the bootloader, but that seems to be useless up to now.
I would like to point out the fact that I successfully flashed a custom ROM via SD card, but that made no difference whatsoever.
boot to bootloader, what does it say next to 'spl'?
assuming the answer to the first part is something like ''x.xx.hspl'' then try flashing a new radio. Go for, example, 2,10 radio, that way it doesnt matter what rom is on there, it should work.
If teh answer to teh first part is ''x.xx.0000'' then hspl is not installed, and you should start over with hspl2 or hspl3
samsamuel said:
boot to bootloader, what does it say next to 'spl'?
assuming the answer to the first part is something like ''x.xx.hspl'' then try flashing a new radio. Go for, example, 2,10 radio, that way it doesnt matter what rom is on there, it should work.
If teh answer to teh first part is ''x.xx.0000'' then hspl is not installed, and you should start over with hspl2 or hspl3
Click to expand...
Click to collapse
I have tried several radios, such a 2.07, 2.10, 2.12 and neither of them worked.
I currently have 1.42.HSPL installed, so it should.
USB does nothing: one time it got to 1% then failed because of "the image being corrupt", and the other 100 times I tried it never went past 0%.
SD card is no better: the progress bar fills up then it says:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - FAIL
Update terminate - UPDATE FAILED
And that's it.
i should stop using sd card, for a start. Stick to one method (usb) and the possible problems immediately halve.
First off i would return to a stock rom. In my case i would use teh original o2 1.43 stock rom, but you can use the 1.66 wwe if you arent sure of your stock.
boot into bootloader and physically check that hspl is still installed - it can be removed by sd card flashing, even if teh rest of teh flash fails, so always worth double checking, not just assuming that it is still installed.
assuming it says 1.42.hspl as you expect, and not anything ending .0000, then connect to usb and wait for teh word 'serial' to become 'usb'
When it does, on your pc run the stockrom.exe file.
Please post any resulting success/errors..
(oh and dont make the newb mistake of leaving a rom image on your sd card, else it will try and flash that.
Step 1: Downloading WWE 1.66.405.2 from another thread I found here on XDA.
Step 2: Formatted SD card and put it back into the device as it was, empty.
Step 3: Physically checked that my bootloader says 1.42.HSPL and it does.
*** Waiting for download to finish ***
Step 4: Loaded the phone into bootloader and connected the cable, so that it says "USB" instead of "Serial".
Step 5: Run as administrator the _HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship I downloaded earlier.
Step 6: Went through all the steps indicated by the installer and it began.
It's 17:35 here and progress is 0%. I will be waiting 10 more minutes, then edit this post.
EDIT: It's 17:42 and the Update Utility says:
ERROR [262]: UPDATE ERROR
The ROM Update Utility has encountered communication errors during the update process. The program will guide you step-by-step to recover from the errors so you can continue with the update.
Step 7: I click on "Recover", then follow the four simple steps to recover my device.
Step 8: The Update Utility goes back to the "Update" button screen, and the whole process repeats over and over.
Any other advice?
SECOND EDIT: I forgot to mention that before clicking the "Update" button, I noticed that there was a blank space where the current image name should have been. Maybe this has something to do with all that is happening?
anrabi4 said:
Step 1: Downloading WWE 1.66.405.2 from another thread I found here on XDA.
Step 2: Formatted SD card and put it back into the device as it was, empty.
Step 3: Physically checked that my bootloader says 1.42.HSPL and it does.
*** Waiting for download to finish ***
Step 4: Loaded the phone into bootloader and connected the cable, so that it says "USB" instead of "Serial".
Step 5: Run as administrator the _HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship I downloaded earlier.
Step 6: Went through all the steps indicated by the installer and it began.
It's 17:35 here and progress is 0%. I will be waiting 10 more minutes, then edit this post.
EDIT: It's 17:42 and the Update Utility says:
ERROR [262]: UPDATE ERROR
The ROM Update Utility has encountered communication errors during the update process. The program will guide you step-by-step to recover from the errors so you can continue with the update.
Step 7: I click on "Recover", then follow the four simple steps to recover my device.
Step 8: The Update Utility goes back to the "Update" button screen, and the whole process repeats over and over.
Any other advice?
SECOND EDIT: I forgot to mention that before clicking the "Update" button, I noticed that there was a blank space where the current image name should have been. Maybe this has something to do with all that is happening?
Click to expand...
Click to collapse
im in the same boat mate and have yet to get it working..mine doesnt fail flashing all the time, but quite often. same thing with the radio v2 fail. i can use bootlader no problem, use hspl to lock and unlock no problem, sometimes a flash goes ok with usb but quite often it doesnt, and when flash from sd to say put a stock rom and relock it it will quite often fail exactly like yours but other times it says its a good flash. if its a good flash itll hard reset like normal, but just wont boot past the white htc screen. i agree at this point, it has to be something related to the radio...whether its corrupt like you were saying or some kind of hardware failure
just a note it is odd that a number of us are all having the same issue..its not just a few anymore
heh ignore, ill re read
samsamuel said:
step 2....... why? did i not advise against sd card flashing? when you run the update on your pc it is restarting the phone, which is immediately flashing the rom from your sdcard,,,,, not the one on your pc.
the problem is that it immediately has removed hspl, and so the rom fails the region check.
remove the nbh from your sd card, and do all the other steps. you may have to reapply hspl, so run hspl2 and choose either 1.42.hspl or 1.66.hspl
Click to expand...
Click to collapse
i just read his step 2 and it sounds like he is saying he formatted it and inserted it empty
the-wrangler said:
i just read his step 2 and it sounds like he is saying he formatted it and inserted it empty
Click to expand...
Click to collapse
heh, d;oh. ill re read and try again (it was the LEOIMG.nbh - FAIL RADIO_V2 - FAIL bits from teh earlier posts that had me thinking he was still using sd card, cos those are sd card flashing errors)
so with the communications erros, could be AV software, firewall, or simply wrong usb port. try all ports (im sure you have by now) and if poss try a whole different pc.
samsamuel said:
heh, d;oh. ill re read and try again
Click to expand...
Click to collapse
lol no worries, i sure appreciate any help fellows like him and i can get. im certainly not new to winmo and im totally stumped.
Also guys, if you are having trouble flashing from USB , try some basic troubleshooting, if you are sure everything on the phone is correct ...
Try different USB port, also USB hubs and flashing can be bad mojo ...
Try a set of usb ports on the back of the PC rather than the front.
Try a different PC
Try a different cable
I also know it sounds strange, but I have seen some anti virus cause a flash to fail because of active scanning and it tries scanning the files in the flash directory while the flash is going on and locks them ...
All I got .....
oh and if the rom you downloaded came as a zip, dont run it from within teh zip. extract it first.
watcher64 said:
Also guys, if you are having trouble flashing from USB , try some basic troubleshooting, if you are sure everything on the phone is correct ...
Try different USB port, also USB hubs and flashing can be bad mojo ...
Try a set of usb ports on the back of the PC rather than the front.
Try a different PC
Try a different cable
I also know it sounds strange, but I have seen some anti virus cause a flash to fail because of active scanning and it tries scanning the files in the flash directory while the flash is going on and locks them ...
All I got .....
Click to expand...
Click to collapse
thanks mate, cant speak for the op but ive tried 3 different computers (xp,vista,7) different cables, everything. seems like roms will flash but it doesnt recognize a radio when booting, hence the white screen with no rgd info..so stumped.
edit..tried many many stock and custom roms and just about every radio out
The thing is that you seem to need a non-corrupted ROM to flash a radio, and need a non-corrupted radio to flash a ROM. As we have neither of them, all I can say is good luck to the guys fixing it at the service center.
I have given up; I have LITERALLY tried every possible solution I could think of. Just for the sake of it, I'll make a list here:
1. Tried all USB ports available.
2. Tried installing different drivers for the Active Sync.
3. Tried task29 w/o MTTY.
4. Tried task29 with MTTY. (Successful, but useless)
5. Tried removing HSPL.
6. Tried changing HSPL.
7. Tried flashing custom ROM. (both USB and SD)
8. Tried flashing stock ROM. (both USB and SD)
9. Tried flashing radio. (both USB and SD)
10. Double (even triple) read all of your useful comments and posts, clicked and typed the hell out of my mouse and keyboard, googled for any possible term I could come up with which was related to our problem.
I have given up for today. Tomorrow morning, I`ll have access to another laptop and I`ll try performing the same operations there, hopefully there will be a difference. All I want now is to get rid of HSPL off that bootloading screen, so that the guys from HTC won't have any reason to decline my warranty.
If nothing works, I will microwave the device for 3-5 seconds, and hopefully it`ll stop booting.
If you guys have any other suggestions, do not hesitate.
anrabi4 said:
The thing is that you seem to need a non-corrupted ROM to flash a radio, and need a non-corrupted radio to flash a ROM. As we have neither of them, all I can say is good luck to the guys fixing it at the service center.
I have given up; I have LITERALLY tried every possible solution I could think of. Just for the sake of it, I'll make a list here:
1. Tried all USB ports available.
2. Tried installing different drivers for the Active Sync.
3. Tried task29 w/o MTTY.
4. Tried task29 with MTTY. (Successful, but useless)
5. Tried removing HSPL.
6. Tried changing HSPL.
7. Tried flashing custom ROM. (both USB and SD)
8. Tried flashing stock ROM. (both USB and SD)
9. Tried flashing radio. (both USB and SD)
10. Double (even triple) read all of your useful comments and posts, clicked and typed the hell out of my mouse and keyboard, googled for any possible term I could come up with which was related to our problem.
I have given up for today. Tomorrow morning, I`ll have access to another laptop and I`ll try performing the same operations there, hopefully there will be a difference. All I want now is to get rid of HSPL off that bootloading screen, so that the guys from HTC won't have any reason to decline my warranty.
If nothing works, I will microwave the device for 3-5 seconds, and hopefully it`ll stop booting.
If you guys have any other suggestions, do not hesitate.
Click to expand...
Click to collapse
lol i hear ya, my issue is i cant seem to locate my receipt of sale for the bloody warrenty...
the-wrangler said:
lol i hear ya, my issue is i cant seem to locate my receipt of sale for the bloody warrenty...
Click to expand...
Click to collapse
you should be able to contact the seller for proof, especially if it was a carrier or someone like p4u.
samsamuel said:
you should be able to contact the seller for proof, especially if it was a carrier or someone like p4u.
Click to expand...
Click to collapse
ya i have, im waiting with fingers crossed lol. stuck with a brutal android cliq until i can get my hd2 back running. really appreciate winmo and hd2 after having to use this
after all, the-wrangler, what are u going to do? you can't just send it in for repairs if you have got HSPL installed...
microwave as well?
anrabi4 said:
after all, the-wrangler, what are u going to do? you can't just send it in for repairs if you have got HSPL installed...
microwave as well?
Click to expand...
Click to collapse
no, bootloader works just fine and it flashes sometimes..flash stock from sd and hspl is back on with stock rom..just wont boot.
oh... lucky you, I suppose...
I sure wished I could get it back as well, really don`t want to use such drastic measures...